www.hamlin.com 55140 Hall Effect Flange Mount Sensor Features Benefits Magnetically operated position sensor Digital,latching or programmable analog types available Medium, high or programmable sensitivities 3 wire (voltage output) or 2 wire (current output) versions Vibration 50g max. @ 50-2,000Hz Shock 150g max. @ 11ms 1/2 Sine EMC to DIN 40839 (Consult Hamlin) Reverse/Over voltage protection Built in temperature compensation Applications High switching speed up to 10kHz Long life; up to 20 billion operations Unaffected by harsh environment Operates in static or dynamic magnetic field Customer selection of cable length and connector type DIMENSIONS (in) mm Position and limit sensing RPM measurement Flow metering Commutation of brushless dc motors Angle sensing Magnetic encoders BLOCK DIAGRAMS Notes: 1. Add capacitor Cn as shown, close to the sensor, for transient suppression if required. 2. Add resistor Rpu as shown for sinking output. CUSTOMER OPTIONS - Switching Specifications SPECIFICATIONS Digital Switch or Digital Latch Digital Switch or Digital Latch A - Analog 3 Wire (Voltage output) 2 Wire (Current output) (Programmable Only) (Note 2) Hall Type Supply Voltage (Note1) Absolute Ratings Vdc -15 to +28 -15 to +28 8.5 Operate Vdc +3.8 to +24 +3.75 to +24 4.5 - 5.5 Overvoltage Protection Vdc - max. 32 32 19.5 Sinking output N/A 4.65 Vdc - max. 0.4 @ 20mA N/A 0.35 mA - max. 20 N/A -1.0 to +1.0 Output High Voltage Vdc Output Low Voltage Output Current (continuously on Current Consumption over Low mA 1.6 - 5.2 5 - 6.9 2 - 10 temperature range High mA 1.6 - 5.2 12 - 17 2 - 10 10 10 2 -40 to +100 -65 to +105 -40 to +100 -65 to +105 -40 to +100 -65 to +150 kHz - max. Temperature C C Switching Speed Operating Storage Note 1 - As long as Tj (Junction Temperature max. Is not exceeded. Note 2 - Preprogrammed by Hamlin or Customer pending agreement. CUSTOMER OPTIONS - Sensitivity, Cable Length and Termination Specification TABLE 1 HALL OPTIONS TABLE 2 ACTIVATE DISTANCES ARE APPROXIMATE (Cable Type 24AWG 7/32 PVC 105 ) USING NEFEB MAGNET (.827l x .276W x .185H) 21 x 7 x 4.7 HAMLIN P/N 5812334000 Standard Lengths Hall Type Sensitivity Gauss (typ.) Activate - d (in) mm 2M 2 Wire Switch 120 (.531) 13,5 2H 2 Wire Switch 57 (.728) 18,5 2L C 9 6 5 1 L U / 0 3 4 1 L U Select Hall Option TABLE 3 Cable Length:- SELECT OPTION Termination Options:SELECT OPTION CABLE LENGTH (in) mm 01 (3.94) 100 02 (11.81) 300 2 Wire Latch 40 (.827) 21,0 3M 3 Wire Switch 130 (.492) 12,5 03 (19.69) 500 3H 3 Wire Switch 59 (709) 18,0 04 (29.53) 750 3L 3 Wire Latch 86 (.394) 10,0 05 AP Analog Programmable Consult Hamlin (39.37) 1000 ORDERING INFORMATION 55140 XX XX Series 55140 Hamlin USA Hamlin Europe Hamlin China Hall Option Table 1 Cable Length Termination Table 2 Table 3 Tel: +1 920 648 3000 * Fax: +1 920 648 3001 * Email: sales.us@hamlin.com Tel: +44 (0)1603 257700 * Fax: +44 (0)1603 257702 * Email: sales.uk@hamlin.com Tel: +86 (0) 512 69365 800 * Fax: +86 (0) 512 69365 811 * Email: sales.cn@hamlin.com DRGNo: 55140XXXXX REV : AG Date: 3/13/13 DCR: B9442 X DESCRIPTION (2 WIRE VERSION ILLUSTRATED A Tinned Leads D AMP MTE 2.54mm pitch E JST XHP 2.5mm pitch