Hyperabrupt Tuning Varactor Diodes E1 C18 P2 ENVIRONMENTAL RATINGS (Maximum) Operating Temperature..............-65 C to +175C Storage Temperature.................-65 C to +200C Soldering Temperature........230 C for 5 seconds Electrical Specifications @ 25C CT20 (pF) See Note 2 MIN MAX 2.0 2.2 2.1 2.1 2.2 3.2 0.70 0.90 0.80 0.80 0.90 1.15 0.90 1.10 1.00 1.00 1.10 1.45 0.13 0.35 0.25 0.25 0.45 0.35 0.25 0.35 0.35 0.45 3.4 3.3 3.3 3.4 4.7 4.9 4.8 4.8 4.9 1.35 1.25 1.65 1.55 1.25 1.35 1.60 1.55 1.65 2.00 0.25 0.45 0.35 0.35 0.45 0.35 0.55 0.45 0.45 0.55 1.80 1.70 2.20 2.10 0.35 0.55 0.50 0.70 1.70 1.80 2.10 2.20 0.45 0.45 0.55 0.60 0.60 0.70 500 500 500 500 500 400 400 400 400 400 7.0 7.2 7.1 7.1 7.2 13.8 14.0 13.9 13.9 14.0 2.50 2.70 3.10 3.30 0.50 0.70 0.70 0.90 400 400 2.60 2.60 2.70 4.30 4.50 3.20 3.20 3.30 5.30 5.50 0.60 0.60 0.80 0.80 400 400 4.40 4.40 5.40 5.40 0.70 0.80 1.00 0.90 0.90 0.90 1.10 1.30 1.20 1.20 400 400 400 400 400 4.50 5.50 1.00 1.30 400 CASE STYLE CT0 (pF) Typical See Note 2 MP 6501 MP 6502 MP 6503 C17 P2 M2 E1 S1 C17 P2 M2 E1 S1 C17 P2 6504 6505 6506 6507 6508 6509 6510 MP 6511 MP 6512 MP MP MP MP MP MP MP MP MP MP 6513 6514 6515 6516 6517 6518 6519 6520 6521 6522 M2 E1 S1 C17 P2 MP 6523 MP 6524 M2 E1 MP 6525 S1 M2 E1 S1 C18 P2 Test Conditions 22 VOLT SILICON SERIES CT4 (pF) See Note 2 MIN MAX PART NUMBER MP MP MP MP MP MP MP M2 105 V R = 0VV R = -4VV R = -20VV Min Q At 50 MHz See Note 1 500 500 500 500 500 R = -4V, 50MHz Hyperabrupt Tuning Varactor Diodes Applications Data 20 10 7 4 2 1 0.7 0.4 0.2 0.1 0 0.5 1 36 10 REVERSE VOLTAGE (V 20 R) volts TYPICAL CV CURVES - P2 PACKAGE E1 P2 0.023 0.017 0.105 0.095 0.005 0.003 0.224 0.202 0.083 0.077 0.123 0.064 0.118 0.060 0.080 MIN 0.064 0.062 0.025 MAX 0.050 MAX 0.094 0.082 0.0030.001 0.0055 0.0045 0.0050.001 0.0055 0.0045 0.015 0.015 C17 1. Q is evaluated from the equation Q = 106 /2 F RS CJ where F is MHz and RS = series resistance measured at 1 GHz using transmission l oss techniques and CJ = junction capacitance in pF measured at 1 MHz and 4 volts. 2. Total Capacitance (CT ) is the total capacitance of the junction (CJ) and the package capacitance (CP). 3. Other capacitance values may be available on request . 4. Case is the heat sink end of each package and is the cathode . 5. Temperature coefficient: 300 ppm/C at VR = - 4 volts . 6. Standard Tolerance is 10%. Other Tolerances Available upon request. 0.020 0.020 C18