ITR-8307/TR8 - Everlight - Datasheet.Live

LifecyclePhase:

Revision : 2

Expired Period: Forever

Release Date:2009-03-23 21:53:56.0

Technical Data Sheet

Opto Interrupter ITR

ITR8307/L24/TR8

Everlight Electronics Co., Ltd. http://www.everlight.com Rev. 2 Page: 1 of 9

Device No：DRX-0000011 Prepared date:2009/03/23 Prepared by: Vic Liao

Features

․High sensitivity

․Cut-Off visible wavelength

․Thin

․Compact

․Pb free

Descriptions

ITR8307/L24/TR8 is a light reflection switch which includes

a GaAs IR-LED transmitter and a NPN photo-darlington with a high

photosensitive receiver for short distance, operating in the

infrared range. Both components are mounted side- by- side in a

plastic package.

Applications

․Camera

․VCR

․Floppy disk driver

․Cassette type recorder

․Various microcomputer control equipment

Device Selection Guide

Device No. Chip Material

IR GaAs

PT Silicon

LifecyclePhase:

Revision : 2

Expired Period: Forever

Release Date:2009-03-23 21:53:56.0

ITR8307/L24/TR8

Everlight Electronics Co., Ltd. http://www.everlight.com Rev 2 Page: 2 of 10

Device No：DRX-0000011 Prepared date:2009/03/23 Prepared by: Vic Liao

Package Dimensions

Notes: 1.All dimensions are in millimeters

2.Tolerances unless dimensions ±0.25mm

Absolute Maximum Ratings (Ta=25 )℃

Parameter Symbol Ratings Unit

Power Dissipation at(or below) 25 Free℃

Air Temperature Pd 75 mW

Reverse Voltage VR6 V

Forward Current IF50 mA

Input

Peak Forward Current (*1)

Pulse width 100μs, Duty cycle=1%≦IFP 1 A

Collector Power Dissipation PC100 mW

Collector Current IC20 mA

Collector-Emitter Voltage B VCEO 15 V

Output

Emitter-Collector Voltage B VECO 6 V

Operating Temperature Topr -25~+85 ℃

Storage Temperature Tstg -30~+90 ℃

Lead Soldering Temperature (*2) Tsol 260 ℃

(＊1) tw=100 μsec. , T=10 msec. (＊2) t≦10 Sec

LifecyclePhase:

Revision : 2

Expired Period: Forever

Release Date:2009-03-23 21:53:56.0

ITR8307/L24/TR8

Everlight Electronics Co., Ltd. http://www.everlight.com Rev 2 Page: 3 of 10

Device No：DRX-0000011 Prepared date:2009/03/23 Prepared by: Vic Liao

Electro-Optical Characteristics (Ta=25 )℃

Parameter Symbol Min. Typ. Max. Unit Conditions

Forward Voltage VF- 1.2 1.4 V IF=20mA

Reverse Current IR- - 10 μA VR=6V

Input

Peak Wavelength λP- 940 - nm -

Output Dark Current ICEO - - 1 μA VCE=10V,

Ee=0mW/cm2

Collector Current IC(ON)＊0.5 - 15.0 mA VCE=2V,

IF=4mA

Leakage Current ICEOD - - 5 μA

VCE=2V,

IF=4mA

d=1mm

Rise time tr - - 400 μs

Transfer

Characteristics

Fall time tf - - 400 μs

VCE=2V

IC=10mA

RL=100,

d=1mm

＊： Reflector is Al deposited glass.

LifecyclePhase:

Revision : 2

Expired Period: Forever

Release Date:2009-03-23 21:53:56.0

ITR8307/L24/TR8

Everlight Electronics Co., Ltd. http://www.everlight.com Rev 2 Page: 4 of 10

Device No：DRX-0000011 Prepared date:2009/03/23 Prepared by: Vic Liao

Typical Electrical/Optical/Characteristics Curves for IR

LifecyclePhase:

Revision : 2

Expired Period: Forever

Release Date:2009-03-23 21:53:56.0

ITR8307/L24/TR8

Everlight Electronics Co., Ltd. http://www.everlight.com Rev 2 Page: 5 of 10

Device No：DRX-0000011 Prepared date:2009/03/23 Prepared by: Vic Liao

Typical Electrical/Optical/Characteristics Curves for PT

LifecyclePhase:

Revision : 2

Expired Period: Forever

Release Date:2009-03-23 21:53:56.0

ITR8307/L24/TR8

Everlight Electronics Co., Ltd. http://www.everlight.com Rev 2 Page: 6 of 10

Device No：DRX-0000011 Prepared date:2009/03/23 Prepared by: Vic Liao

Typical Electrical/Optical/Characteristics Curves for ITR

LifecyclePhase:

Revision : 2

Expired Period: Forever

Release Date:2009-03-23 21:53:56.0

ITR8307/L24/TR8

Everlight Electronics Co., Ltd. http://www.everlight.com Rev 2 Page: 7 of 10

Device No：DRX-0000011 Prepared date:2009/03/23 Prepared by: Vic Liao

Reliability Test Item And Condition

The reliability of products shall be satisfied with items listed below.

Confidence level：90%

LTPD：10%

NO. Item Test Conditions Test Hours/

Cycles

Sample

Sizes

Failure

Judgement

Criteria

Ac/Re

1 Solder Heat TEMP.：260 ±5℃ ℃ 10secs 22pcs 0/1

2 Temperature Cycle H : +85 30mins℃

5mins

L : -25 30mins℃

50Cycles 22pcs 0/1

3 Thermal Shock H :+100 5mins℃

10secs

L :-10 5mins℃

50Cycles 22pcs 0/1

4 High Temperature

Storage

TEMP.：+100℃1000hrs 22pcs 0/1

5 Low Temperature

Storage

TEMP.：-30℃1000hrs 22pcs 0/1

6 DC Operating Life IF=20mA 1000hrs 22pcs 0/1

7 High Temperature/

High Humidity

85 / 85% R.H℃1000hrs 22pcs

IRU×2≧

Ee L×0.8≦

VFU×1.2≧

U：Upper

Specification

Limit

L：Lower

Specification

Limit

0/1

LifecyclePhase:

Revision : 2

Expired Period: Forever

Release Date:2009-03-23 21:53:56.0

ITR8307/L24/TR8

Everlight Electronics Co., Ltd. http://www.everlight.com Rev 2 Page: 8 of 10

Device No：DRX-0000011 Prepared date:2009/03/23 Prepared by: Vic Liao

Recommended Method of Storage

The following are general recommendations for moisture sensitive level (MSL) 4 storage and use:

Shelf life in sealed bag: 12 months at < 40 °C and < 90% relative humidity (RH)

After bag is opened, devices that will be subjected to reflow solder or other high temperature

process must

a) Mounted within 72 hours of factory conditions < 30 °C/60%RH, or

b) Stored at <20% RH

Devices require bake, before mounting, if:

Humidity Indicator Card is > 20% when read at 23 ± 5 °C

If baking is required, devices may be baked:

a) 192 hours at 40 ,and <5% RH(dry air/nitrogen) or

℃

b) 96 hours at 60 ,℃and <5% RH for all device containers

c) 24 hours at 125 °C

Soldering Condition

a) Pb-free solder temperature profile

b) Reflow soldering should not be done more than two times.

c) When soldering, do not put stress on the LEDs during heating.

d) After soldering, do not warp the circuit board.

Repairing

Repair should not be done after the LEDs have been soldered. When repairing is

unavoidable, a double-head soldering iron should be used (as below figure). It should be confirmed

beforehand whether the characteristics of the LEDs will or will not be damaged by repairing.

LifecyclePhase:

Revision : 2

Expired Period: Forever

Release Date:2009-03-23 21:53:56.0

ITR8307/L24/TR8

Everlight Electronics Co., Ltd. http://www.everlight.com Rev 2 Page: 9 of 10

Device No：DRX-0000011 Prepared date:2009/03/23 Prepared by: Vic Liao

Label Aluminum

moisture-proof bag Desiccant Label

Humidity indicator

MSL Label

Taping Dimension

Reel Dimensions

Note: The tolerances unless mentioned is ±0.1mm ,Unit = mm

Moisture Resistant Packaging

LifecyclePhase:

Revision : 2

Expired Period: Forever

Release Date:2009-03-23 21:53:56.0

ITR8307/L24/TR8

Everlight Electronics Co., Ltd. http://www.everlight.com Rev 2 Page: 10 of 10

Device No：DRX-0000011 Prepared date:2009/03/23 Prepared by: Vic Liao

RoHS

Pb

CPN :

P N

ITR8307/L24/TR8

QTY :1000

LOT NO :

Reference :

CAT :

HUE :

REF :

EVERLIGHT

MADE IN TAIWAN

Packing Quantity Specification

1. 1000 Pcs/ 1Reel

2. 15 Reel /1 Box

3. 2 Box/ 1 Carton

EVERLIGHT Label

CPN: Customer’s Production Number

P/N : Production Number

QTY: Packing Quantity

CAT: None

HUE: None

REF: Reference

LOT No: Lot Number

MADE IN TAIWAN: Production Place

Notes

1. Above specification may be changed without notice. EVERLIGHT will reserve authority on

material change for above specification.

2. When using this product, please observe the absolute maximum ratings and the instructions

for using outlined in these specification sheets. EVERLIGHT assumes no responsibility for

any damage resulting from use of the product which does not comply with the absolute

maximum ratings and the instructions included in these specification sheets.

3. These specification sheets include materials protected under copyright of EVERLIGHT

corporation. Please don’t reproduce or cause anyone to reproduce them without

EVERLIGHT’s consent.

EVERLIGHT ELECTRONICS CO., LTD. Tel: 886-2-2267-2000, 2267-9936

Office: No 25, Lane 76, Sec 3, Chung Yang Rd, Fax: 886-2267-6244, 2267-6189, 2267-6306

Tucheng, Taipei 236, Taiwan, R.O.C http://www.everlight.com