CF CARD CONNECTOR MA Type Emboss Tape 1.27mm pitch/50-circuit CF card connector * Socket / SMT type * Card frame / for type I cards * Adapter / for type I, II cards * Header / for type I, II cards * Ejector / for type I, II cards Specifications ------------------- * Type: Dual-row at mating section * Current rating: 0.5 A AC, DC/line * Temperature range: -20C to +60C (including temperature rise in applying electrical current) * Contact resistance: Initial value/ 40 m max. After environmental tests/ 20 m max. (variation from initial value) * Insulation resistance: 1,000 M min. 500V DC (Except for Adapter cards) * Withstanding voltage: 500 VAC/minute (Except for Adapter cards) * Mating/unmating life: 10,000 cycles * Conforms to CFA. In addition to the connectors applicable to CF type I cards, those for CF type II cards are also available. 1 * Refer to "General Instruction and Notice when using Terminals and Connectors" at the end of this catalog. * Contact JST for details. * Compliant with RoHS. CF CARD CONNECTOR MA Type PC board layout (viewed from component side) For Type I cards / Standoff 1.64mm Normal type / Reverse type 460.05 43.20.05 40.160.05 31.1150.05 14.50.05 3 0.40.035 (Pattern width) 2-1.70.1 0 6.350.05 2.3 0.6350.05 (Pattern pitch) 50.05 2-2.20.1 0 Space-saving type For Type I cards / Standoff 0mm Normal type/Reverse type Ejector mounted header with shutter For Type II cards Reverse type (Standoff 0mm) 49 0.03 0.78 0.03 31.115 0.05 0.635 0.03 1.27 0.05 0.03 33.950.05 41.3 0.03 31.7 49.8 0.03 0.05 1.9 0.05 0.85 0.05 50-0.45 0.1 0 1.55 0.4 0.03 1.15 0.05 0.6350.05 0.9 0.05 2-2.2 0 0.03 36.40.05 31.115 0.05 0.05 2-1.25 0 4-1.60.1 0 0.03 41.40.05 4.35 45 0.03 49.8 0.03 Space-saving type For Type II cards / Standoff 0mm Normal type Reverse type 45.13 0.05 39.20.05 0.4 0.035 (Pattern width) 1.60.05 0 1.10.05 0 1.8 0.05 44.38 0.05 43.33 0.05 2-2.10.05 0 37.3 3 0.05 26.5 0.05 38.9 3.350.05 0.635 0.05 (Pattern pitch) 33.950.05 3.85 0.05 1.55 0.05 31.115 0.05 8.150.05 4.35 0.05 23.55 44.380.05 Reinforcement pitch 28.55 0.05 1.10.05 0 0.05 30.05 1.80.05 6.650.05 0.40.05 (Pattern width) 1.550.05 0.6350.05 (Pattern pitch) 1.60.05 0 3.850.05 39.5 0.05 31.1150.05 R0.5 1.9 0.05 Components cannot be mounted inside of this area. 1.20.05 1 2 through-holes 1.2 49.5 0.2 0.05 Components cannot be mounted inside of this area. 43.630.05 1.20.05 54 2 CF CARD CONNECTOR MA Type Socket SMT type ICM-MA50S-TS12-3022 30.48 1.27 3.3 2.7 Offset amount 0.75 35.9 1 4 Circuit No.50 0.25 Circuit No.2 Circuit No.25 2 Circuit No.1 Circuit No.26 6 Circuit No.1 8 No.1 mark 0.5 33 Rib length Tail length 0.635 2.3925 31.115 ICM-MA50S-TS12-3023 30.48 1.27 3.3 2.7 35.9 Offset amount 0.2 6 Circuit No.50 0.25 Circuit No.2 Circuit No.25 2 1 Circuit No.1 Circuit No.26 3 Circuit No.1 8 No.1 mark 0.5 33 Rib length Tail length 0.635 2.3925 31.115 ICM-MA50S-TS12-3024 30.48 1.27 3.3 2.7 35.9 Offset amount 0.35 3 31.115 Circuit No.25 6 Rib length 2 Circuit No.50 0.25 Circuit No.2 0.635 2.3925 1 Circuit No.1 Circuit No.26 4 Circuit No.1 8 No.1 mark 0.5 33 Tail length CF CARD CONNECTOR MA Type Socket SMT type ICM-MA50S-TS12-3026 30.48 1.27 3.3 2.7 35.9 1 0.25 Rib length Circuit No.25 Circuit No.2 2 Circuit No.50 Circuit No.1 Circuit No.26 4 Circuit No.1 6 0.7 No.1 mark 0.5 33 Offset amount 0.95 Tail length 0.635 31.115 32.4 Circuits Solder tail 50 SMT type GND spring With (Circuit No.1, No.26) Offset Rib length Tail length dimensions(mm) (mm) (mm) Model No. 0.75 4.0 ICM-MA50S-TS12-3022T 0.2 3.0 ICM-MA50S-TS12-3023T 0.35 4.0 ICM-MA50S-TS12-3024T 0.95 4.0 ICM-MA50S-TS12-3026T 2.0 Q'ty / reel Material and Finish 1,500 Contact: Copper alloy, nickel-undercoated, Mating part; gold-plated Solder tail; tin-plated (reflow treatment) Grounding spring: Copper alloy, nickel-undercoated, gold-plated Housing: LCP, UL94V-0, black RoHS compliance This product displays (LF)(SN) on a label. 4 CF CARD CONNECTOR MA Type Header (for Type I cards) Normal type (Standoff 1.64mm) 46.6 34.8 31.115 0.3 26.5 19 L 7.5 0.5 5.2 0.635 43.03 30.48 Circuit No.25 1.27 1.4 Circuit No.26 6.62 0.89 0.79 1.27 3.55 Circuit No.1 Circuit No.50 Reverse type (Standoff 1.64mm) 43.03 3.55 1.4 6.62 Circuit No.25 Circuit No.1 0.79 0.89 1.27 1.27 Circuit No.26 30.48 Circuit No.50 5.2 7.5 L (26.5) 19 46.6 0.3 0.635 0.5 31.115 34.8 Circuits Type Model No. Q'ty / box Material and Finish 140 Contact: Phosphor bronze, nickel-undercoated, Mating part; gold-plated Solder tail; tin-plated (reflow treatment) Housing: PPS, UL94V-0 Solder tab: Brass, copper-undercoated, tin-plated (reflow treatment) Normal ICM-MA50H-SS52-1141 50 Reverse ICM-MA50H-SS52-1161 RoHS compliance This product displays (LF)(SN) on a label. 5 Dimension L Circuit No. 1, 13, 38, 50 2 to 12, 14 to 24, 27 to 37, 39 to 49 25, 26 Dimensions (mm) 5.0 0.1 4.25 0.1 3.5 0.1 CF CARD CONNECTOR MA Type Header (for Type I cards) / Space-saving type Normal , Reverse types (Standoff 0mm ) 44.8 0.3 0.3 33.4 31.115 3.4 0.3 L 2.3 5 1.3 0.635 2-2.2 0.1 0 30.48 1.27 Circuit No.1 Circuit No.25 Circuit No.26 Circuit No.50 33.95 Circuits Type Q'ty / box Model No. Contact: Copper alloy, nickel-undercoated, Mating part; gold-plated Solder tail; tin-plated (reflow treatment) Housing: PPS, UL94V-0, black Solder tab: Copper alloy, nickel-undercoated, tin-plated (reflow treatment) Normal ICM-MA50H-SS52-1184 50 Dimension L Circuit No. Material and Finish 1,850 Reverse Dimensions (mm) 1, 13, 38, 50 2 to 12, 14 to 24, 27 to 37, 39 to 49 25, 26 RoHS compliance This product displays (LF)(SN) on a label. 5.0 0.1 4.25 0.1 3.5 0.1 Ejector mounted header with shutter (for Type II cards) Reverse type (Standoff 0mm) 52.7 8.25 7.35 49 3.8 Circuit No.1 3.3Card stroke 14.1 4.4Button stroke 31.7 45 3.6 6.35 5.5Shutter stroke Circuit No.26 51 Circuit No.25 41.3 Circuit No.50 5 49.8 7.5 43.03 30.48 0.9 Circuit No.50 Circuit No.26 Circuit No.25 Circuit No.1 3.6 3.47 1.27 0.9 0.635 31.115 Circuits 50 Type Reverse Model No. Q'ty / box ICM-MA2SL-SD12-RL31 128 Material and Finish Contact: Copper alloy, nickel-undercoated, Mating part; gold-plated Solder tail; tin-plated (reflow treatment) Housing/ Guide bar/ Push button: PPS, UL94V-0, black Lock/ Rotation arm/ Push bar: Stainless Frame: Stainless, selective nickel-undercoated, tin/copper alloy-plated RoHS compliance This product displays (LF)(SN) on a label. 6 CF CARD CONNECTOR MA Type Header (for Type II cards) / Space-saving type Normal type (Standoff 0mm) 0.3 0.3 44.53 5.4 31.115 0.3 1.9 8 L 5 0.635 43.03 0.89 30.48 Circuit No.25 Circuit No.1 Circuit No.26 0.79 1.4 2.05 3.5 1.27 Circuit No.50 39.2 44.38 Reverse type (Standoff 0mm) 0.3 44.53 0.3 31.115 5.35 4.88 0.3 8 L 5 0.635 45.18 43.03 1.27 Model No. 50 Reverse ICM-MA2H-SS52-R13HT 3.5 1.4 Circuit No.1 Q'ty / rell Material and Finish 750 Contact: Phosphor bronze, nickel-undercoated, Mating part; gold-plated Solder tail; tin-plated (reflow treatment) Housing: PPS, UL94V-0 Solder tab: Brass, copper-undercoated, tin-plated (reflow treatment) Normal ICM-MA2H-SS52-N13LT RoHS compliance This product displays (LF)(SN) on a label. The products listed above are supplied on embossed-tape. 7 Circuit No.26 1.85 Circuit No.25 Circuits Type 0.89 3.6 0.79 Circuit No.50 1.27 30.48 0.89 Dimension L Circuit No. 1, 13, 38, 50 2 to 12, 14 to 24, 27 to 37, 39 to 49 25, 26 Dimensions (mm) 5.0 0.1 4.25 0.1 3.5 0.1 CF CARD CONNECTOR MA Type Ejector (for Type I Header) Left button Right button 29.5 29.5 23.6 25 25 4.2 Button stroke 2.8 6.6 6.6 17.4 17.4 Button stroke (3.3) Card stroke 23.6 (3.3) Card stroke 4.2 5.6 5.6 26.5 2.8 26.5 Type Model No. Q'ty / box Material Applicable header Right button ICM-MAE-R01 100 Frame/ Rotation arm : Stainless ICM-MA50H-SS52-1141 Push button: PPS, UL94V-0, black ICM-MA50H-SS52-1161 Left button ICM-MAE-L01 100 RoHS compliance Applicable headers display (LF)(SN) on a label. Ejector mounted header (for Type I Header) / Space-saving type 45.4 3.215 3.53 Card stroke Left button 25.88 0.1 0 43.1 6.3Button stroke 2-2.2 4.65 1.4 38.63 2.425 4 23.87 39.53 Type Reverse (Left button) Model No. ICM-MAE-L91ND Q'ty / box Material and Finish Applicable header 252 Frame: Stainless, nickel-undercoated, tin/copper alloy-plated Rotation arm: Stainless Push button: Synthetic resin, UL94V-0, gray ICM-MA50H-SS52-1184 RoHS compliance This product displays (LF) on a label. An applicable header displays (LF)(SN) on a label. 8 CF CARD CONNECTOR MA Type Ejector (for Type II header) / Space-saving type For Normal type header (Standoff 0mm) Left button For Reverse type header (Standoff 0mm) Right button 22.57 22.57 23.58 6.35 32.5 2-2.1 37.3 37.4 3.2 35.1 26.9 2.7 Card stroke 13 2.7 Card stroke 25.03 8.8 4.5 Button stroke 4.5 Button stroke 25.5 4 24.9 Circuit No.1 Circuit No.25 4.7 14.8 6.3 49.5 4 3.6 Circuit 50 Circuit 26 39.2 For Normal type header (Standoff 0mm) Left button/Push-push type For Reverse type header (Standoff 0mm) Left button/Push-push type 4.65 45.13 38.73 4.45 Type 36.4 20 32 43.03 43.03 Model No. Material and Finish Q'ty / box For Normal type header (Standoff 0mm) Left button ICM-MAE-L73FA 36 Rotation arm/Push bar/Push plate/ Frame: Stainless Button: PBT, UL94V-0, gray For Normal type header (Standoff 0mm) Left button, Push-push ICM-MA2EP-L520A 36 Rotation arm/Push plate: Stainless Button: PBT, UL94V-0, black Frame: Stainless, selective nickel-undercoated, tin/copper alloy-plated For Reverse type header (Standoff 0mm) Right button ICM-MAE-R66C3 36 Rotation arm/Push bar/Push plate/ Frame: Stainless Clinched button: Synthetic resin, black Frame: Stainless, selective nickel-undercoated, tin/copper alloy-plated ICM-MA2EP-L810E 36 Arm: Stainless Push button: Synthetic resin, UL94V-0, black Frame: Stainless, selective nickel-undercoated, tin/copper alloy-plated For Reverse type header (Standoff 0mm) Left button, Push-push RoHS compliance ICM-MAE-R66C3 display (LF) on a label. ICM-MA2EP-L520A/ICM-MA2EP-L810E display (LF) on a label. Applicable headers display (LF)(SN) on a label. 9 2.9Card stroke 37.4 36 3Card stroke 13 7.5 3.4 45.13 Applicable header ICM-MA2H-SS52-N13L ICM-MA2H-SS52-N13LT ICM-MA2H-SS52-R13HT CF CARD CONNECTOR MA Type Card frame (for Type I cards) ICM-MA50F-A/B-FB-C Frame A Frame B 42.8 Circuits Model No. as a set (Frame A + Frame B) 50 ICM-MA50F-A/B-FB-CA (Glue position) 2.9 38 (Component assembling area) Applicable socket ICM-MA50S-TS12-3023T 30.9 (Component assembling area) 36.4 2.9 30.9 (Component assembling area) 36.4 42.8 (Glue position) 38 (Component assembling area) Q'ty / box 150 Material Frame: Glass-filled PBT, UL94V-0 Cover: Stainless RoHS compliance Adapter card For CF Type I cards (PC card 5V key) 1 1.6 68-circuits side 1 1 5max 42 3.3 22 85.6 43.3 54 50-circuits side Model No. ICM-MA50A-C441N Q'ty / box Material and Finish 50-circuits side Header Contact: Copper alloy, nickel-undercoated, Mating part; gold-plated Solder tail; tin-plated (reflow treatment) Housing: PPS, UL94V-0 68-circuits side Socket Contact: Copper alloy, nickel-undercoated, Mating part; gold-plated Solder tail; tin-plated (reflow treatment) Housing: LCP, UL94V-0 Grounding spring: Copper alloy, nickel-undercoated, gold-plated 48 Cover: Stainless Frame: PBT, UL94V-0 PC board: Glass-epoxy, UL94V-0 RoHS compliance This product displays (LF)(SN) on a label. 10 CF CARD CONNECTOR MA Type Adapter card For CF Type II cards (PC card 3.3V key with GND clip spring) For CF Type II cards (PC card 5V key with GND clip spring) 68-circuits side 1 1 1.6 1 1.6 2.1 68-circuits side 1 1 5max 54 5max 42 3.3 42 3.3 50-circuits side Model No. Q'ty / box ICM-MA2A-CL454N 50-circuits side Material and Finish 50-circuits side Header Contact: Copper alloy, nickel-undercoated, Mating part; gold-plated Solder tail; tin-plated (reflow treatment) Housing: PPS, UL94V-0 68-circuits side Socket Contact: Copper alloy, nickel-undercoated, Mating part; gold-plated Solder tail; tin-plated (reflow treatment) Housing: LCP, UL94V-0 Grounding spring: Copper alloy, nickel-undercoated, gold-plated 48 ICM-MA2A-C454N RoHS compliance This product displays (LF)(SN) on a label. 11 33.35 85.6 85.6 33.35 54 Cover: Stainless Frame: PBT, UL94V-0 PC board: Glass-epoxy, UL94V-0 Contact spring: Copper alloy Shutter: PPS, UL94V-0 Spring: Stainless Lock: Stainless