ATC GENERAL PURPOSE CAPACITORS: NPO (COG) DIELECTRIC ELECTRICAL CHARACTERISTICS CAPACITANCE RANGE: 0.5 pF to 0.10 F. TEMPERATURE CHARACTERISTIC: 0 30ppm/C. W L OPERATING TEMPERATURE RANGE: -55C to +125C. T (MAX.) DISSIPATION FACTOR: 0.1% (max.) @ + 25C, @1 MHz 1000 pF; @1 KHz >1000 pF MB INSULATION RESISTANCE @ + 25C and rated Vdc: 100,000 megohms (min.) or 1000 ohm-farads (min.), whichever is less. DIELECTRIC WITHSTANDING VOLTAGE: 250% of rated voltage for 5 1 seconds, 50 milliamps (max.). Unless otherwise specified all test data is at + 25C. Aging Rate Temperature Coefficient Voltage Coefficient of Capacitance Temperature (Celsius) Impedance vs. Frequency Minimum IR vs. Temperature Dissipation Factor vs. Frequency Temperature (Celsius) Sales of ATC products are subject to the terms and conditions contained in American Technical Ceramics Corp. Terms and Conditions of Sale(ATC document #001-992 Rev. A 10/03). Copies of these terms and conditions will be provided upon request. They may also be viewed on ATC's website at www.atceramics.com/productfinder/default.asp. Click on the link for Terms and Conditions of Sale. ATC has made every effort to have this information as accurate as possible. However, no responsibility is assumed by ATC for its use, nor for any infringements of rights of third parties which may result from its use. ATC reserves the right to revise the content or modify its product without prior notice. (c) 1997 American Technical Ceramics. All Rights Reserved. A M E R I C A N T E C H N I C A L ATC North America 631-622-4700 * sales@atceramics.com 2 w w C E R A M I C S ATC Europe +46 8 6800410 * sales@atceramics-europe.com w . a t c e r a m i c s ATC Asia 86-755-8366-4318 * sales@atceramics-asia.com . c o m ATC GENERAL PURPOSE CAPACITORS: NPO (COG) DIELECTRIC SIZE 0402 0504 0603 0805 1206 1210 1812 2225* Length (L) .040 (1.02) .050 (1.27) .063 (1.60) .079 (2.00) .126 (3.20) .126 (3.20) .177 (4.50) .220 (5.59) Width (W) .020 (0.51) .040 (1.02) .031 (0.80) .049 (1.25) .063 (1.60) .098 (2.50) .126 (3.20) .250 (6.35) Tol. L & W .004 (0.10) .006 (.152) .005 (0.12) .008 (0.2) .008 (0.2) .008 (0.2) .010 (0.25) .015 (0.38) .067 (1.70) .070 (1.78) T Max. Term. (MB) Min. Max. .025 (0.64) .044 (1.12) .035 (0.89) .004 .012 .005 .015 .005 .015 (.10) (.30) (.12) (.38) .051(1.30) (.12) (.38) .010 .028 .051 (1.30) (.25) (.71) .010 .028 .067 (1.70) (.25) (.71) .010 .028 (.25) (.71) .010 .030 (.25) .010 (.76) .030 (.25) (.76) 0R5 0R5 0R5 0R5 0R5 681 471 102 16V 271 182 102 103 153 273 393 104 25V 331 122 102 472 223 223 393 104 50V 221 102 102 332 103 223 333 104 100V 101 561 102 182 562 103 183 683 200V 680 391 271 122 392 822 123 473 500V 471 102 222 392 153 1000V 331 821 182 222 103 271 681 122 472 Min. Cap. Max. Cap. (code) & WVDC 10V 2000V 5000V Dimensions shown in inches (mm) * IR and Vapor Phase soldering only recommended. Higher voltages available upon request. PART NUMBER CODE 0603 NPO 1R 0 C T 2 A T Size Code Packaging: T=7" Reel, B=Bulk *R=13" Reel - *Special Order Temperature Characteristic Marking: A=No mark *S=EIA Code - *Special Order Capacitance Code: First 2 Significant Digits For Capacity. WVDC Code A Indicates number of zeros following digits of capacitance in picofarads R=Decimal Point CAPACITANCE TOLERANCE B* C Code Tol. 0.1 0.25 pF (Values < 10 pF) WVDC 7 1 2 3 4 5 6 9 8 10 16 25 50 100* 200* 500* 1000* 2000* 5000* *Special Order - Consult Factory G* 2 J 5 Termination Code T = Tin plated over Nickel Barrier (Standard), RoHS Compliant W = Tin/Lead, Solder Plated over Nickel Barrier** C = Palladium Silver, (non-magnetic), RoHS Compliant** **Consult ATC for availability % (Values > 10 pF) *Tighter tolerances available. STANDARD EIA CAPACITANCE VALUES REFERENCE TABLE Cap. Code Cap. pF Cap. Code Cap. pF Cap. Code Cap. pF Cap. Code Cap. pF Cap. Code Cap. pF Cap. Code 0R5 0.5 6R8 6.8 560 56 471 470 392 3900 273 1R0 1.0 8R2 8.2 680 68 561 560 472 4700 333 1R2 1.2 100 10 820 82 681 680 562 5600 393 1R5 1.5 120 12 101 100 821 820 682 6800 473 1R8 1.8 150 15 121 120 102 1000 822 8200 563 2R2 2.2 180 18 151 150 122 1200 Cap. Code Cap.F 683 103 .010 2R7 2.7 220 22 181 180 152 1500 823 123 .012 3R3 3.3 270 27 221 220 182 1800 104 153 .015 3R9 3.9 330 33 271 270 222 2200 124 183 .018 4R7 4.7 390 39 331 330 272 2700 154 223 .022 5R6 5.6 470 47 391 390 332 3300 184 A M E R I C A N T E C H N I C A L ATC North America 631-622-4700 * sales@atceramics.com w w . a t c e r a m i c Cap. Code Cap. F 224 .22 274 .27 334 .33 394 .39 474 .47 564 .56 684 .68 824 .82 105 1.0 125 1.2 155 1.5 Cap. Code Cap. F 185 1.8 225 2.2 275 2.7 335 3.3 395 3.9 475 4.7 565 5.6 685 6.8 825 8.2 106 10.0 126 12.0 156 15.0 C E R A M I C S ATC Europe +46 8 6800410 * sales@atceramics-europe.com w Cap.F .027 .033 .039 .047 .056 .068 .082 .10 .12 .15 .18 s ATC Asia 86-755-8366-4318 * sales@atceramics-asia.com . c o m 3