Fluke Multimeters and Testers 110/10 Series Multimeters FlukeOs low-cost family of meters, ideal for first-level electrical and electronic troubleshooting. 110 Series Features c True-rms ACV 300 mV to 600 V c DCV 1 mV to 600 V c 6000 Count Display c 0.7% Basic DC Accuracy c MIN./MAX./Average c Capacitance:1 nF to 9999 F c Frequency: 5 Hz to 50 kHz c Manual Reading Hold c Continuity and Diode Test c Resistance: 0.1 1/2 to 40.00 M1/2 c IEC 1010-1 CAT III 600 V Rating c 3-Year Warranty c True-rms AC Current to 10.00 A (111, 112) c DC Current to 10.00 A (111, 112) c Backlight (112) NNEWN NNEWN 10 Series Features c AC and DC Volts 1 mV to 600 V c 4000 Count Display c Continuity and Diode Test c Resistance: 0.1 1/2 to 40.00 M1/2 c Capacitance: 1000 to 9999 F (11, 12, 12B) c V Check (11, 12, 12B) c Continuity Capture (12, 12B) c MIN./MAX. Recording with Relative Time Clock (12, 12B) c IEC 1010-1 CAT III 600 Rating c 3-Year Warranty NNEWN 730-1110. Model 110 ........................................................................................................................................... EACH 99.00 730-1111. Model 111 ........................................................................................................................................... EACH 129.00 730-1112. Model 112 ........................................................................................................................................... EACH 149.00 Fluke 16 Multimeter with Thermometer Fluke T5-600 and T5-1000 Voltage,Continuity and Current Testers Measure Temperature Quickly and Accurately c ItOs a Thermometer: Standard Equipment Includes an 80BK Integrated DMM Temperature Probe c ItOs a Flame Rod Circuit Tester: a Microamp Function Is Included for Flame Sensor Measurements Down to 0.1 Microamps c ItOs a Multimeter with Capacitance: Use the Test Motor Start and Run Capacitors Up to 10,000 Microfarads; Rely on the Fluke 16 to Make Your Everyday Measurements N Up to 600 Volts AC or DC, 40 Megohms, Diode Test and Exceptionally Fast Continuity Safety Conformance IEC-1010-1 1990-09 and ANSI/ISA-S82.01-94, UL 3111, CSA/CAN C22.2 No. 1010.1-92, TV EN61010 Part 1-1993. Size: 1.12" H 2.95" W 6.55"L. Battery Life: 650 hours with alkaline. Three year warranty. Weight: 12 oz. 730-0016. Model 16.........................................................................EACH 129.00 Fluke 1520 MegOhmMeter N NEW N c 3 Output Voltages for Insulation Resistance Testing: 250 V, 500 V, 1000 V c Insulation Resistance Testing Up to 4000 M 1/2 c AC/DC Voltage Measurement Up to 600 V c Lo-Ohms Function for Testing Connections c Autodischarge of Capacitive Voltage Charges c Large, Backlit LCD with Analog Bar Graph and Digital Display c Up to 5,000 Tests with Battery-Life Indicator and Auto Shut-Off c Rugged, Splash-Proof Case with Impact-Absorbing Holster The Fluke 1520 MegOhmMeter is a handy insulation resistance tester that also measures voltage and checks connections with its Lo-Ohms function. Output voltage is constantly monitored and displayed to give confidence in every measurement. Autoselection protects you by automatically switching to voltage measurement mode if MegOhmMeter detects live voltage. Includes heavy-duty test leads, alligator clips, test probes, and three year warranty. 730-1520. Model 1520 ....................................................................EACH 649.00 16 Fluke 45 Dual Display Multimeter Maximum Versatility in a Single Instrument Features c True-Rms Voltage and Current Measurement, Including AC +DC c 0.025% Basic VDC Accuracy c 0.05% DC Current Accuracy for 4-20 mA Current Loop Service c RS-232 Interface Standard, IEEE-488.2 Option c Multifunction Vacuum Fluorescent Dual Display N Allowing the User to Measure Two Different Parameters of the Same Signal from One Test Connection, and View Both Measurements at the Same Time The Fluke 45 is a feature-rich 5-digit, 100,000 count meter that truly fits all applications and virtually any measurement need N on the workbench or in the field. Two multifunction displays and 16 different measurement capabilities allow wide ranging versatility at an affordable price. 986 b ALLIED 739-0010. Model 10 ............................................................................................................................................. EACH 739-0011. Model 11 ............................................................................................................................................. EACH 739-0012. Model 12 ............................................................................................................................................. EACH 739-0201. Model 12B........................................................................................................................................... EACH 79.00 89.00 99.00 99.00 Type 30, 32 and 36 Clamp Meters General Purpose Measurements c Automatically Measures Volts AC and Volts DC with Precise Digital Resolution c Displays Resistance to 1000 Ohms c Easy and Accurate Open Jaw Current Measurement c Continuity Beeper c Compact Design with Neat Probe Storage c Rugged Enough to Withstand a 10-Foot (3 m) Drop c Detachable Probe Tips Are Customized for National Electrical Standards c Test Leads Accept Fluke Accessory Test Clips c Available in 600 Volt and 1000 Volt Models c Can Stay Connected Much Longer Than Solenoid Type Testers c Sleep Mode to Conserve Battery Life c Optional Holster Attaches to a Tool Belt and Neatly Stows Test Leads Fluke T5 electrical testers let you check voltage, continuity and current with one compact tool. With the T5, all you have to do is select volts, ohms, or current and the tester does the rest. Tough test leads stow neatly in the back of the tester, making it easy to tote the T5 in your tool pouch. The optional H5 holster keeps the test probes and leads ready to test, and lets you clip the T5 onto your belt. The open jaw current feature lets you check current up to 100 amps N without breaking the circuit. 739-0600. Model T5-600 ...............................................................EACH 99.95 739-1000. Model T5-1000.............................................................EACH 109.00 860 Series Graphical Multimeters Features High Performance Multimeters with Advanced Graphics and Reporting Capabilities Features c Extraordinary 0.025% DC Accuracy for Critical Measurements c Measure True-Rms Volts and Current, Resistance, Period Capacitance, Frequency, Duty-Cycle, Plus-Width and dB c Trendgraph Electronic Chart Recorder for Plotting Readings for Up to 30 Hours c Big, Bold GMM Display, Shows Multiple Numeric Readings and Waveforms Simultaneously c Autodiode Electronically Reverses Leads and Shows Proper Diode Polarity for Fast and Easy Testing c Min./Max./Average Recording with Time Stamp c Touchhold and Peak Hold c Waveform Memory, Logic Activity Mode, Component Testing, Backlit Display 730-0868. 867BE ...........................................................................EACH 995.00 730-0789. C789. Soft case ............................................................EACH 77.87 730-0781. C781. Soft case ............................................................EACH 39.00 730-0869. SC860. Software and optical cable ..............................EACH 245.00 c Rugged, Easy-to-Use Clamp Meters c Types 30 and 32 Measure AC Volts and Current, Resistance and Continuity c Type 36 Adds DC Volts and Current Measurement c Types 32 and 36 Offer True-Rms AC Measurements c 600 V Cat III Per IEC 1010 Safety Ruling c One Year Warranty The 30 Series family are rugged, self-contained clamp meters for a variety of jobs. Type 30 is excellent for troubleshooting commercial and residential electrical and HVAC systems with traditional linear loads to 400 A/600 V. Type 32 is ideal for non-linear loads like adjustable frequency drives and HID lighting systems with a maximum reading of 600 A/600 V. Type 36 adds MAX Hold for measuring in-rush current or maximum load on a circuit and can measure to 600 A/600 VAC; 1000 A/600VDC. Models include soft case, TL75 test leads, operatorOs manual, quick reference guide, 9 V battery. Battery Life: Model 30 N Carbon-zinc, 200 hours continuous; Model 32 N Alkaline, 300 hours continuous automatic low-battery indicator. Size: 213 mm L 93 mm W 45 mm D (8.4" L 3.75" W 1.77" D). Weight: 0.45 kg (1 lb.). 730-0030. 30....................................................................................EACH 119.00 730-0032. 32....................................................................................EACH 169.00 730-0036. 36....................................................................................EACH 249.00 Specifications Display: 3000 counts, 30 000 counts, 100 000 counts. Reading Rates: Fast (20 times per sec.), medium (5 times per sec.), slow (2.5 times per sec.). Size: 216 mm W 93 mm H 286 mm D (8.5" W 3.67" H 11.27" D). Weight: Net N 2.4 kg (5.2 lbs.); With battery N 3.2 kg (7 lbs.). One year warranty: One year calibration interval. Function Range Best Accuracy (Medium Reading Rate) Resolution VDC VAC (True RMS, AC Coupled) Freq. 20 Hz-100 kHz dB Readout (600 W Ref.) (Ref. Z 2 W-8000 W) ADC AAC (True RMS, AC Coupled) Freq. 20 Hz-20 kHz Resistance Frequency 0 V-1000 V 15 mV-750 V 34 to +60 0 mA-10 A 15 A-10 A 0 W-100 mW 5 Hz->1 MHz 0.025% + 2 0.2% + 10 0.08 dBm 0.05% + 2 0.5% + 10 0.05% + 2 0.05% + 1 1 V-0.01 V 1 V-0.01 V 0.01 dB-0.1 dB 0.1 A-10 mA 0.1 A-10 mA 0.001 W-1 mW 0.01 Hz->1 kHz 739-0045. 45. Mainframe Unit ................................................................................................................................................................................................ EACH 749.00 739-0046. 45-01. With Battery (8 hours typical; 16 hours recharge) ....................................................................................................................................EACH 879.00 739-0047. 45-05. With IEEE-488.2 ......................................................................................................................................................................................... EACH 909.00 739-0048. 45-15. With IEEE-488.2 and Battery (8 hrs. typical; 16 hrs. recharge) ................................................................................................................. EACH 1049.00 739-0049. 45-01K. Battery Kit (8 hours typical; 16 hours recharge) ..................................................................................................................................... EACH 185.00 739-0042. C40. Soft Case for Model 45.................................................................................................................................................................................. EACH 52.50 739-0044. S45. QuickStart 45 Software ................................................................................................................................................................................. EACH 95.00 739-0040. RS-40. 6' RS-232 Termination Cable (DB-9 to DB-25 Female) ............................................................................................................................EACH 31.50 739-0041. RS-41. 6' RS-232 Modem Cable (DB-9 to DB-25 Male) .......................................................................................................................................EACH 30.00 739-0043. M00-200-634. Rack Mount Kit.............................................................................................................................................................................. EACH 122.00 Call Your Nearest Allied Location (1-800-433-5700) For Quick Service