LimitlessTM Wireless Multi-Protocol Receiver WMPR Series Datasheet LimitlessTM WMPR Series Wireless Multi-Protocol Receiver The WMPR Series is a reliable din-rail or panel-mountable receiver that is designed to receive a wireless signal from a LimitlessTM digital or analog input or node. The WMPR Series receiver then communicates the LimitlessTM digital or analog node status (i.e., switch open or closed, pressure value) to an EtherNet/IPTM compliant Master device (i.e., programmable logic controller). When compared to traditional wired solutions, Honeywell's wireless solutions can greatly reduce the costs of wiring, installation, and maintenance by eliminating the need for conduit, connectors, and wire while significantly reducing installation and labor costs. Accommodating up to 14 LimitlessTM digital or analog nodes, the WMPR Series is designed for applications requiring multiple wireless inputs. The WMPR Series receiver is menu driven through the use of function buttons and an easy-to-read LCD. The menu allows the user to see the status of the nodes, configure nodes, and update receiver functionality. What makes our wireless solutions better? *Designed to enable control and/or notification in remote parts of application/machinery/manufacturing plants where wiring is too costly or not possible Ability to reconfigure and network multiple interfaces, or point-to-point with personalized addresses, allows for adding, subtracting, or relocating LimitlessTM inputs easily Reduces installation/maintenance costs due to the elimination of wiring to LimitlessTM switches, conduit, strain relief, clips, connectors, junction boxes, etc. Typically eliminates issues with wire connection integrity on moving equipment Visual feedback via LCD: RF signal loss, battery condition, node update rate, node pairing, etc. Output is ODVA certified (certification pending) - EtherNet/IP Conformance TestedTM INDUSTRY STANDARD VALUE * RELIABLE 2 sensing.honeywell.com Features and Benefits WIRELESS DESIGN Radio (license-free and global): WPAN 802.15.4, 2.4 GHz, point-to-point provides increased reliability, flexibility, and security in wireless transmission. Enables operator control or indication (i.e., push button, pressure sensor, or limit switch) from remote locations where wiring is too costly or is not possible (up to 305 m [1000 ft]. VISUAL FEEDBACK LCD's function buttons on the front panel allow the user to easily navigate through the menu to obtain status of the switch actuation state, sensor value, battery condition, RF signal loss, node pairing, node update rate, fault indications, etc. Range of 305 m [1000 ft] REMOTE MONITORING License-free RF wireless protocol standards (IEEE 802.15.4) allow for remote monitoring of processes and equipment. Designed for global availability, the WMPR offers a wide variety of LimitlessTM inputs with simple and universal PLC connections. Reduces installation and maintenance SIGNAL STRENGTH With direct or remote-mount antenna options for space and/or signal transmission optimization, the WMPR Series receiver can monitor up to 14 LimitlessTM inputs on a single device. RECONFIGURABLE Able to reconfigure multiple inputs allow for adding, subtracting, or relocating of LimitlessTM inputs. Eliminates issues with wire connection integrity on moving equipment. REDUCES COSTS Helps reduce installation/maintenance costs with no wires, conduit, strain relief, clips, connectors, connection boxes, etc. RUGGED THERMOPLASTIC (ABS) HOUSING Sealed to IP20 and designed with a combination of din-rail or through-hole mount for installation ease. RJ-45 EtherNet connection with a lever-actuating connector allows easy installation when installing power connections. sensing.honeywell.com 3 Potential Applications with elements of control, notification, and/or setup INDUSTRIAL 4 sensing.honeywell.com * Valve position * Lifts * Material handling * Presses * Conveyors * Remote or temporary equipment * Safety shower/eye-wash stations * Grain diverters or gates * Mold injection machines * Door or gate position * Hose attachment verification * Specialty machines LimitlessTM Wireless Multi-Protocol Receiver Table 1. Specifications Characteristic Parameter Series name WMPR Series Product type LimitlessTM wireless multi-protocol receiver Housing material Flame retardant ABS (Acrylonitrile Butadiene Styrene) Housing type 35 mm din-rail bracket or through-hole mounting plate design, 3,5 mm [#8] machine screws Housing size 81,3 mm H x 160 mm W x 43,2 mm D [3.2 in H x 6.3 in W x 1.7 in D] ref. Radio type Communication agency approvals/certificates* Antenna connection/type Indication/operator interface Signal range WPAN 802.15.4, 2.4 GHz FCC 15.247: United States of America IC RSS 210: Canada ETSI, CE mark: European RP-SMA jack for direct mount or remote antenna options; omni-directional standard LCD display with function button navigation of a menu program Configuration LEDs: green, blue, red 1000 ft** [305 m]** clear line of sight between LimitlessTM input and receiver when using 2.2 dBi integral antenna Supply voltage 10 Vdc to 30 Vdc Supply current 500 mA max. Output type EtherNet/IPTM (ODVA - EtherNet/IP Conformance TestedTM) (certification pending) Output connector RJ-45 connector Supply connection lever actuating connector Reverse polarity protection Yes Sealing EMC Shock Vibration Operating temperature IP20 Latest applicable standards: EN 300 328, V1.8.1; EN 61326-1 (2013); EN 301 489-1, V1.9.2; EN 301 489-17, V2.2.1 IEC 60068-2-27; half sine, 10 g, 6 mS, 3 axis IEC 60068-2-6; 10 Hz to 58 Hz with 0,75 mm peak-to-peak, 58-500 Hz @ 5g -20 C to 70 C [-4 F to 158 F] * Honeywell is continuing to add new Country Communication Agency Approvals as opportunities and requirements are established **Actual range will vary depending upon antennas, cables, and site topography sensing.honeywell.com 5 WMPR Series PRODUCT NOMENCLATURE WMPR 1 A 00 A 1 A 1 Receiver type GEN code RF code Antenna type code Country use code Output code Seal code Mounting code WMPR Series Multi-Protocol Receiver 1 Version 1 A 2.4 GHz; IEEE 802.15.4 00 No antenna; RP-SMA connector jack A US, Canada 02 2.2 dBi omni w/receiver mount; tilt/swivel B All other approved countries 1 EtherNet/IPTM A IP20 Table 2. WMPR Order Guide 6 Part number Description WMPR1A00A1A1 LimitlessTM EtherNet/IPTM output receiver, no antenna - RP-SMA jack only, mounting plate, for use in US and Canada WMPR1A00B1A1 LimitlessTM EtherNet/IPTM output receiver, no antenna - RP-SMA jack only, mounting plate, for use in all approved countries WMPR1A00A1A2 LimitlessTM EtherNet/IPTM output receiver, no antenna - RP-SMA jack only, din-rail bracket, for use in US and Canada WMPR1A00B1A2 LimitlessTM EtherNet/IPTM output receiver, no antenna - RP-SMA jack only, din-rail bracket, for use in all approved countries WMPR1A02A1A1 LimitlessTM EtherNet/IPTM output receiver, 2.2 dBi omni tilt-and-swivel antenna, mounting plate, for use in US and Canada WMPR1A02B1A1 LimitlessTM EtherNet/IPTM output receiver, 2.2 dBi omni tilt-and-swivel antenna, mounting plate, for use in all approved countries WMPR1A02A1A2 LimitlessTM EtherNet/IPTM output receiver, 2.2 dBi omni tilt-and-swivel antenna, din-rail bracket, for use in US and Canada WMPR1A02B1A2 LimitlessTM EtherNet/IPTM output receiver, 2.2 dBi omni tilt-and-swivel antenna, din-rail bracket, for use in all approved countries sensing.honeywell.com 1 2 Mounting plate, epoxy coated CRS DIN bracket, aluminum Specials LimitlessTM Wireless Multi-Protocol Receiver PRODUCT DIMENSIONS 41,4 mm [1.63 in] RP-SMA antenna connector jack Din bracket (mounting code 2) 80,0 mm [3.15 in] EtherNet/IPTM RJ-45 connector +- Power supply lever-actuated connector 7,87 mm [0.31 in] 159,51 mm [6.28 in] 152,4 mm [6.0 in] 2,36 mm [0.093 in] thickness 88,9 mm [3.5 in] 4X O 4,57 mm [4X O 0.18 in] Mounting plate (mounting code 1) sensing.honeywell.com 7 WMPR Series Table 3. Antenna Listings The WMPR Series can be ordered without an antenna by using the "00" Antenna Type Code in the part number. Antennas may be ordered separately using the Part Numbers below. Part Number (if ordered separately) Antenna Design Antenna Gain (dBi) Connector/Mounting Dimensions WAN01RSP straight 2.2 RP-SMA plug/direct mount O 9,91 mm x 112,78 mm L [O 0.39 in x 4.44 in L] WAN02RSP tilt/swivel 2.2 RP-SMA plug/direct mount O 9,91 mm x 112,78 mm L [O 0.39 in x 4.44 in L] WAN03RSP flat 3.0 RP-SMA plug/adhesive mount O 7,87 mm x 22,1 mm W x 4,57 mm D [O 0.31 in x 0.87 in W x 0.18 in D] 3 m [9 ft] cable WAN05RSP* tilt/swivel 9.0 RP-SMA plug/direct mount O 12,7 mm x 384,05 mm L [O 0.50 in x 15.12 in L] WAN06RNJ* straight 8.0 RP-N jack/bracket O 33,5 mm x 427,9 mm L [O 1.32 in x 16.85 in L] WAN09RSP low profile mobile 3.0 RP-SMA plug/magnetic O 76,2 mm x 115 mm L [O 3.0 in x 4.54 in L] 4,57 m [15 ft] cable WAN10RSP straight 5.0 RP-SMA plug/magnetic O 76,2 mm x 230,1 mm L [O 3.0 in x 9.06 in L] 1,52 m [5 ft] cable WAN11RSP* low profile mobile dome 4.0 RP-SMA plug/thru-hole screw O 39 mm x 42,4 mm L [O 1.54 in x 1.67 in L ] * Not allowed for use with Country Code "B" LimitlessTM products 8 sensing.honeywell.com ADDITIONAL INFORMATION The following associated literature is available on the Honeywell web site at sensing.honeywell.com: * Product installation instructions * Product range guide * LimitlessTM product brochure * Video: Dr. Larry on LimitlessTM Wireless Solutions WARNING PERSONAL INJURY DO NOT USE these products as safety or emergency stop devices or in any other application where failure of the product could result in personal injury. Failure to comply with these instructions could result in death or serious injury. * White Paper: LimitlessTM Switches Offer Unlimited Benefits WARNING * Product application-specific information - Application Flyer: Fume Hood Sash Management MISUSE OF DOCUMENTATION - Application Flyer: Safety Shower/Eyewash Station Alarm Solutions (WBX Series) * - Application Note: Crane Jib/Two Block Assembly - Application Note: LimitlessTM Wireless Solutions in Anti-Two Block Warning Systems for Cranes, Stationary and on Trucks - Application Note: LimitlessTM Wireless Solutions in Industrial Tank Level Monitoring * The information presented in this product sheet is for reference only. Do not use this document as a product installation guide. Complete installation, operation, and maintenance information is provided in the instructions supplied with each product. Failure to comply with these instructions could result in death or serious injury. - Application Note: LimitlessTM Wireless Solutions on Automotive Factory Floors - Application Note: LimitlessTM Wireless Solutions on Hangar Doors - Application Note: Sensors and Switches for Industrial Manual Process Valves - Application Note: Sensors and Switches in Mobile Cranes - Application Note: Sensors and Switches Used in Valve Actuators and Valve Positioners Find out more Honeywell serves its customers through a worldwide network of sales offices, representatives and distributors. For application assistance, current specifications, pricing or name of the nearest Authorized Distributor, contact your local sales office. To learn more about Honeywell's sensing and control products, call +1-815-235-6847 or 1-800-537-6945, visit sensing.honeywell.com, or e-mail inquiries to info.sc@honeywell.com Sensing and Productivity Solutions Honeywell 1985 Douglas Drive North Golden Valley, MN 55422 honeywell.com 002391-1-EN IL50 GLO September 2015 Copyright (c) 2015 Honeywell International Inc. All rights reserved. EtherNet/IPTM is a registered trademark of ODVA, Inc. EtherNet/IP Conformance TestingTM is a registered trademark of ODVA, Inc.