Metal Package PMT with Cooler Photosensor Modules H7422 Series Heatsink with fan (A7423) sold separately The H7422 series are photosensor modules with an internal high-voltage power supply circuit and a cooler installed to the metal package photomultiplier tube. Efficient cooling was achieved by placing the cooler near the photomultiplier tube to reduce thermal noise emitted from the photocathode and a high S/N ratio can be obtained even at extremely low light levels. The H7422-40 has high sensitivity in the 300 nm to 720 nm wavelengths. The H7422-50 is sensitive along a wide spectral range from 380 nm to 890 nm. The H7422-01, H7422-02 and H7422-20 have a maximum output current value of 100 A and so are extremely effective when measurements are needed over a wide dynamic range. The photomultiplier tube is maintained at a constant temperature by monitoring the output from a thermistor installed near the photomultiplier and then regulating the current to the thermoelectric cooler. Product Variations Type No. Spectral Response Max. Output Signal Current H7422-40 300 nm to 720 nm H7422P-40 2 A H7422-50 380 nm to 890 nm H7422P-50 300 nm to 850 nm H7422-01 300 nm to 870 nm 100 A H7422-02 300 nm to 890 nm H7422-20 Features GaAsP photocathode, QE 40 % at peak For photon counting wavelength, high gain (P type) GaAs photocathode, QE 12 % at peak For photon counting wavelength, high gain (P type) Multialkali photocathode Infrared-extended multialkali photocathode Infrared-extended high-sensitivity multialkali photocathode Specifications 18 P Type Standard Type Anode Cathode Parameter Suffix Input Voltage Max. Input Voltage for Main Unit Max. Input Current for Main Unit Max. Input Voltage for Thermoelectric Cooler Max. Input Current for Thermoelectric Cooler Max. Output Signal Current Max. Control Voltage Recommended Control Voltage Adjustment Range Effective Area Sensitivity Adjustment Range Peak Sensitivity Wavelength 420 nm Radiant Sensitivity 550 nm 800 nm Radiant Sensitivity *1 550 nm Typ. Dark Current *1 *2 Max. Radiant Sensitivity *3 550 nm Typ. Dark Count *2 *3 Max. Rise Time *1 Ripple Noise *1 *4 (peak to peak) Max. Settling Time *5 Operating Ambient Temperature Storage Temperature Weight -50 -40 H7422 Series -01 +11.5 to +15.5 +18 62 -02 -20 30 2.6 2.2 100 +0.9 (Input impedance 100 k) +0.25 to +0.8 +0.5 to +0.8 5 7 1: 104 1: 50 400 800 580 500 56 15 108 40 36 50 176 56 1.2 90 -- 6.4 1.8 x 104 2.5 x 104 8.8 x 104 2.8 x 104 0.4 0.5 0.03 0.08 1.0 1.3 0.08 0.2 1.8 x 105 5.0 x 104 -- -- -- -- 100 125 -- -- 300 375 1.00 0.78 0.6 0.2 +5 to +35 -20 to +50 Approx. 400 2 630 40 72 46 3.6 x 104 0.1 0.25 -- -- -- *1: Control voltage = +0.8 V PMT setting temperature 0 C, used with C8137-02 and A7432 *2: After 30 minute storage in darkness *3: Plateau voltage, PMT setting temperature 0 C, used with C8137-02 and A7423 *4: Cable RG-174/U, Cable length 450 mm, Load resistance = 1 M, Load capacitance = 22 pF *5: The time required for the output to reach a stable level following a change in the control voltage from +1.0 V to +0.5 V. Unit -- V V mA V A A V V mm -- nm mA/W A/W nA A/W s-1 ns mV s C C g Current Output Type Photosensor Modules Cooling Specifications H7422 Series Thermoelectric cooling 35 Approx. 5 Parameter Cooling Method Max. Cooling Temperature (T) *6 Cooling Time *6 Unit -- C min *6: Input current to thermoelectric cooler=2.0 A Characteristics (Cathode radiant sensitivity, Gain) TPMOB0135EB 108 1000 108 TPMOB0137EB H7422-20 107 107 100 H7422P-40/-50 106 106 H7422-01/-02/-20 H7422-01 10 105 H7422-02 104 104 103 103 102 0.25 0.3 1000 0.5 0.7 1.0 1.5 102 0.25 0.3 2.0 CONTROL VOLTAGE (V) Block Diagram 1.0 1.5 2.0 CONTROL VOLTAGE (V) 8-M3 DEPTH: 2 POWER INPUT TAJIMI PRC03-23A10-7M ACROSS SECTION PHOTOCATHODE 15.0 0.2 26.0 0.2 22.2 0.2 WINDOW SIGNAL OUTPUT (CURRENT OUTPUT) 18.5 0.2 PMT HV POWER SUPPLY VOLTAGE DIVIDER CIRCUIT 4.0 0.1 SIGNAL OUTPUT BNC-R PHOTOCATHODE B A 8-M3C 20.0 0.2 20.0 0.2 53.6 0.2 TOP VIEW 4-M3B 36.0 0.3 CONTROL VOLTAGE INPUT (H7422-01, -02, -20: +0.25 V to +0.8 V) (H7422-40, -50: +0.5 V to +0.8 V) 25.4 0.2 6.4 0.2 7.4 0.2 14.8 0.2 BCROSS SECTION 6.5 0.2 44.0 0.2 M25.4 P = 1/32" C-MOUNT M3 DEPTH: 4.0 Max. CCROSS SECTION 2.0 0.2 M3 DEPTH: 4.0 Max. GUIDE MARK TPMOC0144EB 9.5 0.1 PMT A O-RING GROOVE (S-28 O-RING INCLUDED) 4-M2 DEPTH: 2 GND 0.7 Dimensional Outlines (Unit: mm) POWER INPUT for THERMOELECTRIC THERMISTOR COOLER Vcc 0.5 7.2 800 10.2 600 M25.4 P=1/32" C-MOUNT 400 WAVELENGTH (nm) THERMOELECTRIC COOLER 105 H7422-50 1 0.1 200 GAIN H7422-40/-50 GAIN CATHODE RADIANT SENSITIVITY (mA/W) H7422-40 TPMOB0136EA A 19.0 0.2 25.0 0.2 104 1 56.0 0.3 FRONT VIEW SIDE VIEW A B A: THERMISTOR 1 B: THERMISTOR 2 C: THERMOELECTRIC E G B COOLER + D C D: THERMOELECTRIC COOLER - E: Vcc LOW VOLTAGE INPUT(+15 V) TAJIMI PRC03-23A10-7M F: CONTROL VOLTAGE INPUT (H7422-01, -02, -20: +0.25 V to +0.8 V) (H7422-40, -50: +0.5 V to +0.8 V) G: GND F H7422-40/-50 H7422-01/-02/-20 16.3 0.2 15.3 0.3 5 7 A TPMOA0024EC 19 Metal Package PMT with Cooler H7422 Series option 1 SOLD SEPARATELY POWER SUPPLY UNIT with TEMPERATURE CONTROL M9012 Vcont CHK2 Vcont-ADJ Don't use CHK3 CHK4 CN04 6 CN5 2345 SW2 CN03 ON SW1 POWER SUPPLY UNIT with TEMPERATURE CONTROL C8137-02 5 C-MOUNT LENS INPUT 12 V 6 DIRECT SAMPLE 1 CABLES (Supplied with M9012 or C8137-02) GND 2 CHK1 OPTICAL FIBER HEATSINK with FAN A7423 CN01 4 OPTICAL FIBER ADAPTER A7412 C-MOUNT ADAPTER A7413 PHOTOSENSOR MODULE H7422 SERIES 3 SIGNAL CABLE E1168-05 ON ON POWER INPUT AC 100 V to AC 240 V SIGNAL OUTPUT Heatsink with Fan A7423 Signal Cable E1168-05 The temperature of the H7422 outer case rises due to the thermoelectric cooler housed in the case. The A7423 heatsink efficiently radiates away this heat to prevent a temperature rise in the H7422. The A7423 can be easily installed onto the H7422 with four M3 screws. Apply a heat conductive grease onto the joint surface shared by the H7422 and A7423. This signal cable is terminated with a BNC connector for easily connecting the H7422 to external equipment. Parameter Input Voltage During Lock Input Current During Operation Operating Voltage Weight Value 12 140 90 10.2 to 13.8 120 Unit V mA mA V g Power Supply Unit with Temperature Control M9012 The M9012 is an on-board type power supply unit. By just connecting to 12 V supply, the M9012 provides power necessary to operate the H7422 series. The M9012 also controls the thermoelectric cooler in the H7422 series so that the output and noise can be maintained at constant levels even when the ambient temperature changes. The thermoelectric cooler and PMT operation can be controlled from an external device by connecting it to the I/O connector on the M9012. Parameter Max. Cooling Temperature (T) Input Voltage Max. Input Current Max. Power Consumption Main Circuit Output Voltage Max. Output Current for Thermoelectric Cooler Output Voltage for Fan Max. Control Output Voltage Max. Control Input Voltage Thermoelectric Cooler Control PMT Signal Input Voltage Fan Error Signal Thermoelectric Cooler Output Voltage PMT PMT LED Output Error Setting Cooling Temperature Weight (excluding cables) 20 TPMOC0145EC Value 35 12 1.2 15.8 12 2.2 12 1.26 0.9 Non-insulated TTL level input Non-insulated TTL level input Non-insulated TTL level input Non-insulated TTL level output Non-insulated TTL level output 5 5 0 120 Unit C V A V*A V A V V V -- -- V C g Optical Fiber Adapter (FC Type) A7412 The A7412 is an FC type optical fiber connector that attaches to the light input window of the H7422. The A7412 can easily be secured in place with four M2 screws. C-Mount Adapter A7413 The A7413 mount adapter is used when a C-mount lens protruding 4 mm or more from the flange-back must be installed onto the H7422. Power Supply Unit with Temperature Control C8137-02 The C8137-02 is a power supply unit with a temperature control function. Just connecting to an AC source of 100 V to 240 V generates the output voltages for the thermoelectric cooler and the A7423 fan, needed for operating the H7422. The photomultiplier tube temperature can be maintained to 0 C by monitoring the thermistor and regulating the output current for the thermoelectric cooler. Control voltage can be varied by a knob on the front panel. Parameter Value Max. Cooling Temperature (T) 35 Setting Cooling Temperature 0 (preset at factory) Input Voltage AC 100 to AC 240 Input Voltage Frequency 50/60 Power Consumption 30 Main Circuit Output Voltage +15 2.2 Max. Current for Thermoelectric Cooler 12 Output Voltage for Fan 0 to +0.9 Control Voltage Adjustment Range 1.1 Weight Unit C C V Hz V*A V A V V kg Current Output Type Photosensor Modules H7422 Series Options (Unit: mm) 1 Heatsink with Fan A7423 4 Optical Fiber Adapter (FC Type) A7412 LEAD LENGTH 50 10 4- 2.2 4 TAPERED DEPTH 1.5 16.5 0.3 22.2 0.2 52.0 0.5 2.5 M8 P=0.75 3.0 9.5 TOP VIEW 5.5 3 4-M2 L=3 15 LIGHT SHIELD SHEET (THICKNESS: 0.5) 9 FRONT VIEW SIDE VIEW TACCA0190EB 8 30 SIDE VIEW TACCA0188ED 22 JST XMR-02V 92.0 0.5 M25.4 P=1/32" C-MOUNT 53.6 0.3 5 C-Mount Adapter A7413 M25.4 P=1/32" C-MOUNT 19.2 0.3 40 1 24.5 0.5 4-M3 (SUPPLIED) 4 14 2 Power Supply Unit with Temperature Control M9012 4-M2 15.0 0.1 70.0 0.1 TACCA0191EA 28.0 0.2 2345 50.0 0.2 CN03 SW2 1 POWER SWITCH 13.8 0.2 SW1 ON CN01 6 40.0 0.1 6 Power Supply Unit with Temperature Control C8137-02 PHOTOSENSOR SWITCH CONTROL VOLTAGE ADJUSTABLE DIAL ON CN04 CN5 CHK1 CHK2 GND Vcont CHK3 CHK4 ON Don't use Vcont-ADJ 5.0 0.1 17.5 0.2 16.0 0.5 100.0 0.3 CONTROL VOLTAGE DISPLAY FRONT VIEW 8 1500 50 42 46.0 0.5 FAN CABLE MODULE CABLE 212 1 1500 50 12.5 SIDE VIEW MODULE OUTPUT POWER CABLE AC INPUT 1000 50 EXTERNAL I/O CABLE 1000 50 FAN OUTPUT FUSE REAR VIEW EXTERNAL I/O HOUSING TACCA0251EA POWER CABLE +50 1500 -0 FAN CABLE +50 3 Signal Cable E1168-05 1500 -0 AC CABLE BNC-P 1500 +50 -0 BNC-P 1800 to 2000 TACCA0148EA TACCA0238EB 21