PDA, Modem, TA, factory automation (FA) equipment, industrial cameras,
various electronic devices
Rated voltage
Rated current
Insulation resistance
Dielectric withstanding
voltage
Contact resistance
125V AC (r.m.s.)
0.5 to 1.5 A (Jack)
Over 1000 megohms at 100V DC
500V AC (r.m.s.)
20 to 60 milliohms or less
MOD series
Modular Connectors
Outline
Features
Principal
Applications
Electrical
Characteristics
MOD series connectors comply with FCC and NTT standards, allowing them
to be used for international products.
• Because these connectors are designed as smaller-sized and light-weight
connectors, they are suitable for high density equipment with limited space.
• The contact plating is gold plate, ensuring that the connectors provide high
reliability and secure contact.
• Through-hole and crimping type jacks are available.
• Ensures secure connectors with screw locks in the fit state, and fixed
strength.
• Provides EMI-filtered countermeasure products.
Document Disclaimer
When placing orders with us, minimum order quantities are set for every product.
Be sure to contact us before starting preliminary design of PCBs using our connectors.
The specifications and information shown in the catalog are subject to change without notice.
Connectors
Modular
Reflow temperature profile
(for reference purposes)
Flow temperature profile
(for reference purposes)
The reflow temperature profile shown in this drawing is for reference
purposes. This profile depends on requirements such as reflow
equipment, soldering paste, and PCB size. Thus, this profile may not
meet with your specific situation. Please evaluate your PCB-mounting
soldering and set your own reflow temperature profile.
ΩApplicable products
The profile shown in this drawing is applicable only for those products shown above.
The flow temperature profile as shown above is for reference
purposes. This profile depends on requirements such as the PCB size.
Thus, this profile may not meet with your specific situation. Please
evaluate your PCB-mounting soldering and set your own flow
temperature profile.
ΩApplicable products
The profile shown in this drawing is applicable only for those products shown above.
MOD-J88YA( )A+
MOD-SJ88YA( )A+
MOD-J88YA02E+
MOD-YSJ88YA03C+
MOD-J4( )DA( )A+
MOD-J6( )DA( )A+
MOD-J6( )DA( )B+
MOD-J88DA12A+
MOD-SJ88DA02D( )+
MOD-SJ88DA02B+
MOD-YSJ88D03C+
100~130˚C
260±5˚C
30~60sec
5sec
250
200
150
90±30s
Preheating Zone
Soldering Zone
Heating time
30±10s
100
50
180˚C
150˚C
(˚C)
Peak: 250+5 ˚C
230˚C or more
0
Temperture
Product List
Right-angle through hole type
modular jack for PCB
MOD-J4( )DA( )A+
E-6MOD
MOD series...4
Right-angle through hole type
modular jack for PCB
MOD-J6( )DA( )A+
E-7MOD
MOD series...5
Right-angle through hole type
modular jack for PCB
MOD-J6( )DA( )B+
E-8MOD
MOD series...6
Cap for Jack
MOD-6C( )
E-9MOD
MOD series...7
Right-angle through hole type
modular jack for PCB
MOD-J88DA12A+
E-10MOD
MOD series...8
Right-angle SMT type
modular jack for PCB
MOD-J88YA( )A+
E-11MOD
MOD series...9
Right-angle SMT type
modular jack for PCB
MOD-SJ88YA( )A+
E-12MOD
MOD series...10
Right-angle through hole type
modular jack for PCB
(With ferrite core)
MOD-SJ88DA02D( )+
E-13MOD
MOD series...11
Right-angle through hole type
modular jack for PCB
MOD-SJ88DA02B+
E-14MOD
MOD series...12
Right-angle SMT type
modular jack for PCB
MOD-J88YA02E+
E-15MOD
MOD series...13
Right-angle SMT type
modular jack for PCBs
MOD-SJ88YA02B3+
E-16MOD
MOD series...14
Right-angle RJ45
modular jack with cables
for panels
MOD-J88W22-AS( )+
E-17MOD
MOD series...15
Right-angle R11
modular jack with cables
for panels
MOD-J62W22-AS( )+
E-18MOD
MOD series...16
Straight through hole type
modular jack for PCB
MOD-YSJ88D03C+
E-19MOD
MOD series...17
Right-angle SMT type
modular jack for PCB
MOD-YSJ88YA03C+
E-20MOD
MOD series...18
Modular plug
MOD-YSP88P03+
E-21MOD
MOD series...19
Right-angle through hole type modular jack for PCB
MOD-J4( )DA( )A+
Modular connector
For PCB
Right-angle Through hole
FCC Standard
● Configuration of product Part No.
➀➁➂➃➄➅
MOD- J 4 ( ) DA ( )A+
Mating connectors: 4-4 modular plug
¡ Series name
™ Jack
£ Opening size: For 4 contacts
¢ No. of contacts
2: 4-2 Jack
4: 4-4 Jack
∞ Type of contact
Right-angle through hole type
§ Contact plating
03: Min. 0.3 μm Gold plate
10: Min. 1.0 μm Gold plate
● Components
¡
™
Contacts
Insulator
9.4±0.05
12.2
143
ø0.46
13
™
¡
7.3
2.542.54
9.4
1.02
1.8
3.05
1.02±0.05
3.05±0.05
2.54±0.05
2-ø2.4
2.54±0.05
0
–0.1
Recommended PCB layout
7.3
Edge of jack
4-ø0.8±0.05
Others
Wire
wrapping
CrimpingSolderingIDCPress-inSMT
Through
hole
Right-angle through hole type modular jack for PCB
MOD-J6( )DA( )A+
Modular connector
For PCB
Right-angle Through hole
FCC Standard
● Configuration of product Part No.
➀➁➂➃➄➅
MOD- J 6 ( ) DA ( )A+
Mating connectors: 6-2, 6-4, 6-6 modular plug
Accessory: Cap: MOD-6C( )
¡ Series name
™ Jack
£ Opening size: For 6 contacts
¢ No. of contacts
2: 6-2 Jack
4: 6-4 Jack
6: 6-6 Jack
∞ Type of contact
Right-angle through hole type
§ Contact plating
03: Min. 0.3 μm Gold plate
10: Min. 1.0 μm Gold plate
● Components
¡
™
Contacts
Insulator
1.02±0.05
3.05±0.05
12.2 13
9.4±0.05
143
™
¡
5.08±0.05
2.54±0.05
2-ø-2.4
ø0.46
2.54±0.05
Recommended PCB layout
7.3
Edge of jack
7.3
2.542.54
9.4
1.02
1.8
3.05
5.08
6-ø-0.8±0.05
0
–0.1
Others Wire
wrapping Crimping Soldering IDC Press-in SMT Through
hole
Right-angle through hole type modular jack for PCB
MOD-J6( )DA( )B+
Modular connector
For PCB
Right-angle Through hole
FCC Standard
● Configuration of product Part No.
➀➁➂➃➄➅
MOD- J 6 ( ) DA ( )B+
Mating connectors: 6-2, 6-4, 6-6 modular plug
Accessory: Cap: MOD-6C( )
¡ Series name
™ Jack
£ Opening size: For 6 contacts
¢ No. of contacts
2: 6-2 Jack
4: 6-4 Jack
6: 6-6 Jack
∞ Type of contact
Right-angle through hole type
§ Contact plating
03: Min. 0.3 μm Gold plate
10: Min. 1.0 μm Gold plate
¡
™
Contacts
Insulator
14.8
1.02±0.05
1.02
3.05±0.05
2.5
2.5
3.05
5.08
12.2
7
1.3
2.54
14
12
12±0.05
143
™
¡
5.08±0.05
72.54±0.05
1.3±0.05
2-ø2.4
6-ø0.8±0.05
ø0.46
0
–0.1
Recommended PCB layout
Edge of jack
Others
Wire
wrapping
CrimpingSolderingIDCPress-inSMT
Through
hole
Cap for Jack
MOD-6C( )
Modular connector
Accessorys
Cap
● Configuration of product Part No.
➀➁➂
MOD- 6C ( )
Mating connectors: 6-2, 6-4, 6-6 Caps for Jac
¡ Series name
™ Cap for 6 contacts
£ Externals size
Y
X
7.5 1
● Dimensions
12
11
12
Part No.
15.8
14.6
MOD-6C2
MOD-6C2A
MOD-6C3
YX
Others Wire
wrapping Crimping Soldering IDC Press-in SMT Through
hole
Right-angle through hole type modular jack for PCB
MOD-J88DA12A+
Modular connector
For PCB
Right-angle Through hole
IEC, FCC
● Configuration of product Part No.
➀➁➂➃
MOD- J88 DA 12 A+
Mating connectors: 8-8 modular plug
¡ Series name
™ 8-8 Jack
£ Type of contact
Right-angle through hole type
¢ Contact plating
Min. 1.27 μm Gold plate
● Components
¡
™
Contacts
Insulator
+0.1
0 +0.05
0
1.27 2.35
20.8
16
6.352.54 10.54
0.35
3.2
3.8
11.43
15.2
17.8
0.4
1.27≈7=8.89
6.35±0.05
2.54±0.05 10.54
11.43±0.05
1.27≈7=8.89±0.05
1.27±0.05
ø3.1ø0.8
Edge of jack
Recommended PCB layout
™
¡
Others
Wire
wrapping
CrimpingSolderingIDCPress-inSMT
Through
hole
MOD
MOD
MOD
Right-angle SMT type modular jack for PCB
MOD-J88YA( )A+
Modular connector
For PCB
Right-angle SMT
FCC
● Configuration of product Part No.
➀➁➂➃
MOD- J88 YA ( )A+
Mating connectors: 8-8 modular plug
¡ Series name
™ 8-8 Jack
£ Type of contact
Right-angle SMT type
¢
Contact plating
02:
Min. 0.2 μm Gold plate
07:
Min. 0.76 μm Gold plate
12:
Min. 1.27 μm Gold plate
● Components
¡
™
£
Contacts
Hold down
Insulator
15.2
18.3 3.7
22 REF.
12.5
11.5
12
15.2
17.8
2.5 1.5
1.7
2.6
1.6 4.8
7.5 3.2
11.1 3.2
10.4
20 2-ø1.8
ø2.1
0.35
1.02
7.14
0.6 REF.
1.02±0.05
7.14±0.1
Pattern
3.5 9.5 2
11.1±0.1 32
2.8+0.1
0
ø2.05±0.05
1.9+0.1
0
+0.05
0
1.9 +0.1
0
10.4±0.1
17.8 2.1
2.1
Recommended PCB layout
4-R1.4
™
£
¡
Others Wire
wrapping Crimping Soldering IDC Press-in SMT Through
hole
Right-angle SMT type modular jack for PCB
MOD-SJ88YA( )A+
Modular connector
For PCB
Right-angle SMT
FCC
● Configuration of product Part No.
➀➁➂➃
MOD- SJ88 YA ( ) A+
Mating connectors: 8-8 modular plug
¡ Series name
™ 8-8 Jack with shield
£ Type of contact
Right-angle SMT type
¢
Contact plating
02:
Min. 0.2 μm Gold plate
07:
Min. 0.76 μm Gold plate
12:
Min. 1.27 μm Gold plate
● Components
¡
™
£
Contacts
Insulator
Shield Recommended PCB layout
15.2
18.5 3.7
22.2 REF.
12.7
11.7
12
15.6
18.2
2.5 1.9
1.7
2.6
1.6 4.8
4.2 1.7
11.1 3.4
10.4
22 2-ø1.8
ø2.1
0.35
1.02
7.14
0.6 REF.
1.02±0.05
7.14±0.1
Pattern
3.5 6.2 0.7
11.1±0.1 32
2.8+0.1
0
ø2.05±0.05
4-R1.4
1.9+0.1
0
+0.05
0
1.9 +0.1
0
10.4±0.1
17.8 3.5
3.5
™
£
¡
Others
Wire
wrapping
CrimpingSolderingIDCPress-inSMT
Through
hole
Right-angle through hole type modular jack for PCB
(With ferrite core)
MOD-SJ88DA02D( )+
Modular connector
For PCB
Right-angle Through hole
ISO 10173
● Configuration of product Part No.
¡™£¢∞
MOD- SJ88 DA 02 D( )+
Mating connectors: 8-8 modular plug (ISO10173)
¡ Series name
™ 8-8 Jack with shield (ISO10173)
£ Type of contact
Right-angle through hole type
¢
Contact plating:
Min. 0.2 μm Gold plate
∞
Ferrite core
Blank: Provided
1 : None
● Components
¡
™
£
¢
Insulator
Contacts
Shell
Ferrite core
£
¡
™
01
0.35
7.71 REF.
9.1
11.9 1.27
4.05
1.27
11.8
0.76
7.4 8.6
7.11
5.08
3.05
1.02
17.6
16.5
7.2 6 2
0.35
3
¢
0.6±0.05
5.08±0.05
7.11±0.05
3.05±0.05
1.02±0.05
8-0.8±0.05
7.3±0.05
7.2±0.05 6±0.05 2±0.05
4.05±0.1
6±0.1
8.5±0.05
2.4±0.05
4-R0.3
Edge of connector
Recommended PCB layout
Others Wire
wrapping Crimping Soldering IDC Press-in SMT Through
hole
Right-angle through hole type modular jack for PCB
MOD-SJ88DA02B+
Modular connector
For PCB
Right-angle Through hole
IEC, FCC
● Configuration of product Part No.
➀➁➂➃
MOD- SJ88 DA 02B+
Mating connectors: 8-8 modular plug
8-8 modular plug (With shield)
¡ Series name
™ 8-8 Jack with shield
£ Type of contact
Right-angle through hole type
§
Contact plating:
Min. 0.2 μm Gold plate
● Components
¡
™
£
Contacts
Insulator
Shield
Recommended PCB layout
¡
™
£
14
18
POS.#8 POS.#1
8-0.8±0.05
4-R0.3±0.05
17.8±0.1
0.6±0.05
1.02±0.05
POS.#1
POS.#2
POS.#8
Groove part
25.7
0.45≈0.35
1.02
1.02≈7=7.14
17.8 0.5
4.3 2.54
1.1
14
0.5
1.9
10.2
1.02≈7=7.14±0.05
3.1MAX. 2.54±0.05
1.1±0.05
2.2±0.05
Others
Wire
wrapping
CrimpingSolderingIDCPress-inSMT
Through
hole
Right-angle SMT type modular jack for PCB
MOD-J88YA02E+
Modular connector
For PCB
Right-angle SMT
ISO 10173
● Configuration of product Part No.
➀➁➂➃
MOD- J88 YA 02 E+
Mating connectors: 8-8 modular plug (ISO 10173)
¡ Series name
™ 8-8 Jack (ISO 10173)
£ Type of contact
Right-angle SMT type
§
Contact plating:
Min. 0.2 μm Gold plate
● Components
¡
™
£
Insulator
Contacts
Hold down Recommended PCB layout
£
¡
™
7.11
0.35
16.6
11.9
9.1
7.71 REF.
1.27
0.6±0.05
1.02±0.02
3.05±0.02
5.08±0.02
7.11±0.02
10.75±0.1
3.6±0.1
6±0.1
4.8±0.1
Edge of connector
5.08
3.05
1.02
2.15
(SMT lead size)
4.05 11.5
0.3
2.2
4
2.5
14.2
16.7
12.8
1.27
17.5+0.1
0
10.9+0.1
0
Others Wire
wrapping Crimping Soldering IDC Press-in SMT Through
hole
11.4
12
™
5
3.5
2
(14)
(11.3) 1.2 min.
4.5 min.
L1.7
11
1
0.6
1.8
2.9
11.9
12.9
7.11
5.08
3.05
1.02
¡
£
¢
10.9
13.6
13.6
∞
§
5.7 6.1
3.45
A
8
10.1
5
Terminal strip
Recommended panel layout
● Configuration of product Part No.
➀ Series name
➁ 8-8 jack
➂ Misinsertion prevention, crimping type
➃ Cable length
Right-angle RJ45 modular jack with cables for panels
MOD-J88W22-AS( )+
Mating connectors: 8-8 plug
➀➁ ➃
➂
Modular connector
For panels
Right-angle, with cables
Misinsertion prevention, FCC Standard
MOD- J88 W22- AS( )+
● Components
Insulator A
Insulator B
Contacts
Contacts
Misinsertion prevention lever
Misinsertion prevention Key
Cable
➀
➁
➂
➃
➄
➅
➆
Others Wire
wrapping Crimping Soldering IDC Press-in SMT Through
hole
Right-angle R11 modular jack with cables for panels
MOD-J62W22-AS( )+
➀ Series name
➁ 6-2 jack
➂ Misinsertion prevention, crimping type
➃ Cable length
● Configuration of product Part No.
Mating connectors: 6-2 plug
➀➁➂ ➃
● Components
➀
➁
➂
➃
➄
Insulator A
Insulator B
Contacts
Contacts
Cable
12.9 (Note 1)
11.9
9
7.5
(11)
∞
1.8
1.8
2.73
9.84
3.5
2
1.1 9.9 L
1.7
A
2
5
10
¡
£
¢
10.9
13.6
11.6
1.02
™
2
3.5
5
6.5
8
9.4
Modular connector
For panels
Right-angle, with cables
FCC Standard
MOD- J62 W22- AS( )+
Terminal strip
Others
Wire
wrapping
CrimpingSolderingIDCPress-inSMT
Through
hole
MOD
MOD
MOD
Straight through hole type modular jack for PCB
MOD-YSJ88D03C+
Modular connector
For panel (Screw lock)
Straight through hole
For RJ-45
● Configuration of product Part No.
➀➁➂
MOD- YSJ88 D03C+
Mating connectors: Assembly of MOD-YSP88P03C+ use
¡ Series name
™ 8-8 Jack with shield
£ Straight through hole type
● Components
¡
™
£
¢
∞
Contacts
Shell
Insulator
Nuts
Screw lock
HONDA
£
™
¡
¢
20±0.05
16MIN.
4-R0.5 0
-0.1
2-R1.15 +0.4
0
Recommended panel mounting-hole layout
t=1.2mm~1.6mm
7.4MIN.
6.25MIN.
26.4
1 REF.
20
15.6
13.25
1 REF.
POS. #8 POS. #1
POS. #1
POS. #8
POS. #2
2 REF. 11
11
5.7 REF.
2.5
5.3
2.4
8.45
6.05 REF.
4-ø1.5
Recommended PCB layout
t=1mm~1.6mm
8-ø0.8±0.05
11±0.05
1.02±0.05
15.4±0.05
7.14±0.1
2.54±0.05
8.845±0.05
7±0.05
2-ø1.6+0.1
0
1.5+0.1
0
R0.2+0.1
0
0.4+0.1
0
∞5 5.6
The lock screw is appended.
Others Wire
wrapping Crimping Soldering IDC Press-in SMT Through
hole
Right-angle SMT type modular jack for PCB
MOD-YSJ88YA03C+
Modular connector
For panel (Screw lock)
Right-angle SMT
For RJ-45
● Configuration of product Part No.
➀➁ ➂
MOD- YSJ88 YA03C+
Mating connectors: Assembly of MOD-YSP88P03C+ use
¡ Series name
™ 8-8 Jack with shield
£ Right-angle SMT type
● Components
¡
™
£
¢
∞
Contacts
Shell
Insulator
Nuts
Screw lock
HONDA
£
™
¡
¢
20±0.05
2.6±0.05
17.4±0.05
3.4±0.05
11±0.05
7.14±0.1
1.02±0.05
0.65±0.05
16MIN.
4-R0.5 0
-0.1
2-R1.15+0.4
0
Recommended panel mounting-hole layout
t=1.2mm~1.6mm
Recommended PCB layout
t=1mm~1.6mm
7.4MIN.6.25MIN.
26.4
1 REF.
20
15.6
13.251 REF.
POS. #8
The lock screw is appended.
POS. #1
2 REF. 11
11
5.7 REF.
2.5
5.3
2.4
8.45
6.05 REF.
4-ø1.5
POS. #1
POS. #8
ø2-1.6 +0.1
0
5.5 0
-1
2.4 0
-0.1
2.15 0
-0.1
4.45 +0.5
0
8.5MIN.
∞5 5.6
Others
Wire
wrapping
CrimpingSolderingIDCPress-inSMT
Through
hole
Modular Plug
MOD-YSP88P03+
Modular connector
For cable
Screw lock
● Configuration of product Part No.
➀➁➂
MOD- YSP88 P03+
Mating connectors: MOD-YSJ88D03C+, MOD-YSJ88YA03C+
¡ Series name
™ 8-8 Jack with shield
£ Piyasshing
● Components
¡
™
£
¢
∞
Contacts
Shell A
Shell B
Insulator
Screw lock
Note 1: Minimum order size is 1,000 items.
Note 2: When you buy connectors without overmold,
please prepare the overmold yourself.
* If you are considering the purchase of harness work parts, please contact us for details.
Screw lock
Straight type
11.68
6.6
26
20
20
£
™
¡
¢
2.06 10.2
22.6
17.9
∞
3.5 REF.
30.15 REF.
26.4 REF.
19.4 REF.
29 REF.
8.7+0.2
0
The lock screw is appended.
Others Wire
wrapping Crimping Soldering IDC Press-in SMT Through
hole