357 Beloit Street, P.O. Box 457, Burlington, WI 53105-0457 U.S.A. Phone 262/763-3591 FAX 262/763-2881
Email: nelsales@nelfc.com www.nelfc.com
TTL
HS-160 Series
Description
The HS-160 Series of quartz crystal oscillators are general purpose TTL oscillators. All units are resistance
welded in an all metal package, offering RFI shielding, and are designed to survive standard wave soldering
operations without damage. Insulated standoffs to enhance board cleaning are standard.
Features
• Wide frequency range–0.5MHz to 85.0MHz
• User specified tolerance available
• Will withstand vapor phase temperatures of 253°C
for 4 minutes maximum
• Space-saving alternative to discrete component
oscillators
• High shock resistance, to 3000g
• All metal, resistance weld, hermetically sealed
package
• Low Jitter
• High Q Crystal actively tuned oscillator circuit
• Power supply decoupling internal
• No internal PLL avoids cascading PLL problems
• High frequencies due to proprietary design
• Gold plated leads - Solder dipped leads available
upon request
• Low power consumption
Electrical Connection
Pin Connection
1 N.C.
7 Grd & Case
8 Output
14 VCC
CRYSTAL CLOCK OSCILLATORS Data Sheet 9225B
Rev. S
357 Beloit Street, P.O. Box 457, Burlington, WI 53105-0457 U.S.A. Phone 262/763-3591 FAX 262/763-2881
Email: nelsales@nelfc.com www.nelfc.com
HS-160 Series Continued
TTL
Operating Conditions and Output Characteristics
Electrical Characteristics
Parameter Symbol Conditions Min Typical Max
Frequency ----- ----- 0.5MHz ----- 85.0MHz
Duty Cycle ----- @ VCC/2 40/60% ----- 60/40%
Logic 0 VOL @ 16mA ----- ----- 0.4V
Logic 1 VOH @ 0.4mA 2.4V ----- -----
Rise & Fall Time tr,tf @ 0.4 to 2.4V
<40MHz ----- ----- 8.0 ns
40MHz or greater ----- ----- 5.0 ns
Jitter, RMS(2) ----- <40MHz OT & >40MHz ----- ----- 5 psec
<40MHz Fund ----- ----- 8 psec
Frequency Stability (1) dF/F Overall conditions including: -100ppm ----- +100ppm
voltage, calibration, temp.,
10 yr aging, shock, vibration
General Characteristics
Parameter Symbol Conditions Min Typical Max
Supply Voltage VCC ----- 4.75V 5.0V 5.25V
Supply Current ICC No Load 0.0 mA ----- 50 mA
Output current IO ----- 0.0 mA ----- ±25.0 mA
Operating temperature TA ----- 0°C ----- 70°C
Storage temperature TS ----- -55°C ----- 125°C
Power Dissipation PD----- ----- ----- 263 mW
Lead temperature TL Soldering, 10 sec. ----- ----- 300°C
Load ----- ----- ----- ----- 10 TTL gate
Start-up Time ts<20MHz ----- ----- 2 ms
20MHz or greater ----- ----- 10 ms
Environmental and Mechanical Characteristics
Mechanical Shock Per MIL-STD-202, Method 213, Condition E
Thermal Shock Per MIL-STD-833, Method 1011, Condition A
Vibration 0.060" double amplitude 10 Hz to 55 Hz, 35g’s 55Hz to 2000 Hz
Soldering Condition 300°C for 10 seconds
Hermetic Seal Leak rate less than 1 x 10-8 atm.cc/sec of helium
Footnotes:
1) Standard frequency stability (±20,±25,±50ppm & others available)
2) Jitter performance is frequency dependent. Please contact factory for full characterization.
Test Load:
Rev. S
CRYSTAL CLOCK OSCILLATORS
HS - X16X - FREQ
Package Code Tolerance/Performance
HS Leaded 4 pin (14 pin) 0 ±100ppm 0-70°C
SM Leaded 4 pin (14 pin) SMD 1 ±50ppm 0-70°C
Gull Wing 7 ±25ppm 0-70°C
Input Voltage 9 Customer Specific
Code Specification A ±20ppm 0-70°C
A 3.3V B ±50ppm -40 to +85°C
5V C ±100ppm -40 to +85°C
Creating a Part Number
Data Sheet 9225B
