LED DATA SHEET Part No. LSG40543 Emitted Color Super Green Len's Color Water Clear Features: 3mm Elliptical resin mold type High intensity and reliable Chip materialInGaN Package Dimensions: 3.9 3.1 6.3 3.9 1.5 max 3.1 1 0.5 typ 25.0min 2 1.ANODE 2.CATHODE 1.0min 2.54 typ Note: 1All dimensions are in millimetres (mm) 2Tolerance is 0.25mm unless otherwise noted Part No. LSG40543 Edition Data:2002-12-10 http://www.wenrun.com Page: 1of 3 Fax:0511-5512860 Absolute Maximum Rating Ta=25 Parameter Symbol Max. Unit PM 150 Mw IFP 100 mA IF 40 mA VR 6 V Operating Temperature Range Topr -2585 Storage Temperature Range Tstg -40100 Power Dissipation Pulse Forward Current (Duty 1/10 @ 1kHz) Continuous Forward Current Reverse Voltage Solder Temperature2.0mm From Body For 3 Seconds at 260 Electrical Optical CharacteristicsTa=25 Parameter Test Symbol Min. Typ. Max. Unit Luminous Intensity IV -- 800 -- mcd IF =20mA Forward Voltage VF -- 3.5 4.0 V IF =20mA Reverse Current IR -- 50 uA VR =5V Dominant Wavelength d -- 525 -- nm IF =20mA Peak Emission Wavelength P -- 520 -- nm IF =20mA Spectral Line Half Width -- 30 -- nm IF =20mA Viewing Angle 21/2 -- 40 -- Deg. IF =20mA Condition Note: 1The luminous intensity data andP is survey values with the machine JF-JS-2000. 221/2 is the clip angle at which the luminous intensity is half the axial luminous intensity. 3Pay attention to electrostaticESD Part No. LSG40543 Edition Data:2002-12-10 http://www.wenrun.com Page: 2of 3 Fax:0511-5512860 Typical Characteristic Curves: Spectral Radiance Normalized Response 100% 80% 60% 40% 20% 0% 380 420 460 500 540 580 620 660 700 740 780 Wave Length(nm) Relative Luminous Intensity Vs Forward Current Relative Intensity 125% 100% 75% 50% 25% 0% 0 10 20 30 Forward Current IF(mA) Forward Current(mA) Forward Current Vs. Forward Voltage 40 30 20 10 0 1 2 3 4 5 Forward Voltage(V) Part No. LSG40543 Edition Data:2002-12-10 http://www.wenrun.com Page: 3of 3 Fax:0511-5512860