2
FH35C Series●0.3 mm pitch, 0.9 mm height, back flip type dual-sided FPC connector
■Product Specifications
Ratings
Current rating: 0.2 A (Note 1)
Voltage rating: AC 30 Vrms
Operating temperature Range: –55 to +85°C (Note 2)
Operating temperature Range: 90% or less of relative
humidity
(No dew condensation is allowed)
Storage temperature Range: -10 to +50°C (Note 3)
Storage temperature Range: 90% or less of relative
humidity
(No dew condensation is allowed)
With specifi cations compatible with FPC contacts t = 0.2 ± 0.03 gold plating
Items Specifi cations Conditions
1.Insulation Resistance No less than 50 Mø Measured at 100 V DC
2.Withstand Voltage No fl ashover or breakdown Conduct 90 V AC for one minute
3.Contact Resistance 100 mø MAX.
* Including FPC conductor resistance AC 20 mV MAX (1 KHz), 1 mA
4.Mating Cycles Contact resistance: no more than 100 mø
No breakage, cracks, or loosened parts 10 times
5.Vibration Resistance
No electric outage of 1 µs or greater
Contact resistance: no more than 100 mø
No breakage, cracks, or loosened parts
At the frequency of 10-55 Hz, half amplitude 0.75 mm,
and 10 cycles in each of three axial directions
6.Shock Resistance
No electric outage of 1 µs or greater
Contact resistance: no more than 100 mø
No breakage, cracks, or loosened parts
Acceleration: 981 m/s2
Duration: 6 ms, sine half-wave, 3 cycles in each of the
3 axis each in both directions
7. Humidity Resistance
(Steady State)
Contact resistance: no more than 100 mø
Insulation Resistance: 50 mø or more
No breakage, cracks, or loosened parts
Left to stand for 96 hours at the temperature of 40°C
and the humidity of 90% to 95%
8.Temperature Cycles
Contact resistance: no more than 100 mø
Insulation Resistance: 50 mø or more
No breakage, cracks, or loosened parts
Temperature:-55➝ +15 to+35➝ +85➝ +15 to +35°C
Time: 30➝ 2 to 3 ➝ 30➝ 2 to 3 minutes
5 cycles with the above conditions
9. Solder Heat
Resistance
No deformation in appearance or marked instability of
contacts
Refl ow: According to the Recommended Temperature Profi le
Manual soldering: 350± 10°C for 5± 1 sec.
(Note 1) Use at 70% of the current rating when all pins are energized with the stated current rating.
(Note 2) Temperature rise at the time of electrifi cation is included.
(Note 3) The term “storage” refers to the long-term storage condition of unused products before mounting on the PCB.
The operating temperature and humidity ranges apply to non-energized state after PCB mounting.
(Note 4) The above specifi cations are representative of this series. Please refer to “drawing for approval” for offi cial individual agreement.
■Materials
Part Materials Treatment UL Regulation
Insulator LCP Gray Recognition
Polyamide resin Black
Contact Phosphor bronze Nickel barrier Gold plating ------
Metal fi tting Phosphor bronze Pure tin refl ow plating
■Product Number Structure
Refer to the chart below when searching for the part number nomenclature.
Please select connectors listed in this catalog when placing orders.
The characteristics and specifications of the products described in this catalog are for reference only.
Please make sure to check the latest delivery specifications before the time of purchase.
FH 35 C − 35S − 0.3 SHW (50)
❶❷❸ ❹ ❺ ❻ ❼
❻ Contact Form
SHW: SMT horizontal staggered array mount type
❼ Specifi cations:
(50): standard product (5000 connectors per reel)
(99): 500 connectors per reel
❶ Series Name: FH
❷ Series No.: 35
❸ C: dual-sided, halogen-free product
❹ Number of contacts : 9 to 51
❺ Contact Pitch: 0.3 mm