264HS-Series - ABB Semiconductors

Data Sheet

SS/264HS/NS_3

ABB 2600T Series

Engineered solutions

for all applications

■Base accuracy : ±0.075%

■Span limits

– 0.65 to 60000kPa; 2.6inH2O to 8700psi

– 1.1 to 16000kPa abs; 8mmHg to 2320psia

■Reliable sensing system coupled with very latest

digital technologies

– provides large turn down ratio up to 100:1

■Comprehensive sensor choice

– optimize in-use total performance and stability

■5–year stability

■Flexible configuration facilities

– provided locally via local keys combined with LCD

indicator or via hand held terminal or

PC configuration platform

■Multiple protocol availability

– provides integration with HART®, PROFIBUS PA

and FOUNDATION Fieldbus platforms offering

interchangeability and transmitter upgrade

capabilities

■Full compliance with PED Category IV

– suitable for safety accessory application

FieldIT

2600T Series Pressure Transmitters

Model 264HS Gauge

Model 264NS Absolute

high overload

overpressure up to 90MPa, 13050psi

2600T Pressure Transmitters

Model 264HS, 264NS SS/264HS/NS_3

Operative limits

Temperature limits °C (°F) :

Ambient (is the operating temperature)

Lower ambient limit for LCD indicators: –20°C (–4°F)

Upper ambient limit for LCD indicators: +70°C (+158°F)

Note : For Hazardous Atmosphere applications see the temperature

range specified on the certificate/approval relevant to the aimed

type of protection

Process

Lower limit

– refer to lower ambient limits

Upper limit

– Silicone oil: 121°C (250°F) (1)

– Inert fluid (Galden or Halocarbon): 100°C (212°F) (2)

– Inert fluid (Carbon fluoride): 121°C (250°F)

(1) 100°C (212°F) for application below atmospheric pressure

(2) 65°C (150°F) for application below atmospheric pressure

Storage

Lower limit: –50°C (–58°F); –40°C (–40°F) for LCD indicators

Upper limit: +85°C (+185°F)

Span limits

Maximum span = URL

IT IS RECOMMENDED TO SELECT THE TRANSMITTER SENSOR

CODE PROVIDING THE TURNDOWN VALUE AS LOWEST AS

POSSIBLE TO OPTIMIZE PERFORMANCE CHARACTERISTICS.

Zero suppression and elevation

Zero and span can be adjusted to any value within the range limits

detailed in the table as long as:

– calibrated span ≥ minimum span

Damping

Selectable time constant : 0, 0.25, 0.5, 1, 2, 4, 8 or 16s.

This is in addition to sensor response time

Turn on time

Operation within specification in less than 1s with minimum

damping.

Insulation resistance

> 100MΩ at 1000VDC (terminals to earth)

Functional Specifications

Range and span limits

rosneS

edoC

egnaRreppU

)LRU(timiL

egnaRrewoL

)LRL(timiL

napsmuminiM

SH462

eguag

SN462

etulosba

aPk56

rabm056

Hni062

sbaaPk70.0

sbarabm7.0

gHmm5.0

aPk56.0

rabm5.6

Hni6.2

aPk1.1

rabm11

gHmm8

aPk061

rabm0061

Hni246

sbaaPk70.0

sbarabm7.0

gHmm5.0

aPk6.1

rabm61

Hni4.6

aPk76.2

rabm7.62

gHmm02

aPk006

rab6

isp78

sbaaPk70.0

sbarabm7.0

gHmm5.0

aPk6

rab60.0

isp78.0

aPk01

rab1.0

isp54.1

aPk0042

rab42

isp843

sbaaPk70.0

sbarabm7.0

gHmm5.0

aPk42

rab42.0

isp5.3

aPk04

rab4.0

isp8.5

aPk0008

rab08

isp0611

sbaaPk70.0

sbarabm7.0

gHmm5.0

aPk08

rab8.0

isp6.11

aPk431

rab43.1

isp4.91

aPk00061

rab061

isp0232

sbaaPk70.0

sbarabm7.0

gHmm5.0

aPk061

rab6.1

isp2.32

aPk762

rab76.2

isp7.83

aPk00006

rab006

isp0078

sbaaPk70.0

sbarabm7.0

gHmm5.0

aPk006

rab6

isp78

gnilliF SH462ledoMSN462ledoM

SotGsrosneSVrosneSSotGsrosneS

lioenociliS 58+dna04–

)581+dna04–(

58+dna04–

)581+dna04–(

58+dna04–

)581+dna04–(

trenI nedlaG

58+dna02–

)581+dna4–(

56+dna01–

)051+dna41+(

trenI nobracolaH 58+dna02– )581+dna4–( 56+dna01–

)051+dna41+(

trenI ediroulFnobraC

58+dna02–

)581+dna4–(

2600T Pressure Transmitters

Model 264HS, 264NS SS/264HS/NS_3

Pressure limits

Overpressure limits (without damage to the transmitter)

0.067kPa abs, 0.67mbar abs, 0.01psia (double with inert filling) to

– 21MPa, 210bar, 3045psi for sensor codes G to S

– 90MPa, 900bar, 13050psi for sensor code V

Proof pressure

The transmitter can be exposed without leaking to line pressure of up to

– 40MPa, 400bar, 5800psi for sensor codes G to S

– 90MPa, 900bar, 13050psi for sensor code V

Meet ANSI/ISA–S 82.03 hydrostatic test requirements and SAMA PMC

27.1.

Environmental limits

Electromagnetic compatibility (EMC)

Comply with EN 61000–6–3 for emission and EN 61000–6–2 for

immunity requirements and test;

Radiated electromagnetic immunity level: 30V/m

(according to IEC 1000–4–3, EN61000–4–3)

Conducted electromagnetic immunity level : 30V

(according to IEC 1000–4-6, EN 61000–4–6)

Surge immunity level (with surge protector): 4kV

(according to IEC 1000-4–5 EN 61000–4–5)

Fast transient (Burst) immunity level: 4kV

(according to IEC 1000–4–4 EN 61000–4–4)

Pressure equipment directive (PED)

Comply with 97/23/EEC Category IV Modules D and B.

(Category III Module H for sensor code V).

Humidity

Relative humidity: up to 100% annual average

Condensing, icing: admissible

Vibration resistance

Accelerations up to 2g at frequency up to 1000Hz

(according to IEC 60068–2–26)

Shock resistance

Acceleration: 50g

Duration: 11ms

(according to IEC 60068–2–27)

Wet and dust-laden atmospheres

The transmitter is dust and sand tight and protected against immersion

effects as defined by EN 60529 (1989) to IP 67 (IP 68 on request) or by

NEMA to 4X or by JIS to C0920.

Hazardous atmospheres

With or without output meter/integral display

– INTRINSIC SAFETY/EUROPE:

ATEX/ZELM approval

II 1 GD T50°C, EEx ia IIC T6 (–40°C ≤ Ta ≤+40°C)

T95°C, EEx ia IIC T4 (–40°C ≤ Ta ≤+85°C)

– TYPE "N"/EUROPE:

ATEX/ZELM type examination (for HART)

II 3 GD T50°C, EEx nL IIC T6 (–40°C ≤ Ta ≤+40°C)

T95°C, EEx nL IIC T4 (–40°C ≤ Ta ≤+85°C)

(FOUNDATION Fieldbus/PROFIBUS PA): pending

– FLAMEPROOF/EUROPE:

ATEX/CESI approval

II 1/2 GD T85°C, EEx d IIC T6 (–40°C ≤ Ta ≤ +75°C)

– CANADIAN STANDARDS ASSOCIATION

and FACTORY MUTUAL:

– Explosionproof: Class I, Div. 1, Groups A, B, C, D

– Dust ignitionproof : Class II, Div. 1, Groups E, F, G

– Suitable for : Class II, Div. 2, Groups F, G; Class III, Div. 1, 2

– Nonincendive: Class I, Div. 2, Groups A, B, C, D

– Intrinsically safe: Class I, II, III, Div. 1, Groups A, B, C, D, E, F, G

AEx ia IIC T6/T4, Zone 0 (FM)

– STANDARDS AUSTRALIA (SAA): pending

TS/WCA Approval

Ex d IIC T5 (Tamb +85°C)/T6 (Tamb +70°C) Class 1 Zone 1;

Ex ia IIC T4 (Tamb +85°C) /T5 (Tamb +55°C) T6 Class 1 Zone 0

2600T Pressure Transmitters

Model 264HS, 264NS SS/264HS/NS_3

Optional surge protection

Up to 4kV

– voltage 1.2µs rise time / 50µs delay time to half value

– current 8µs rise time / 20µs delay time to half value

Output signal

Two–wire 4 to 20mA, user-selectable for linear or 5th order or two 2nd

order switching point selectable programmable polynomial output.

HART® communication provides digital process variable (%, mA or

engineering units) superimposed on 4 to 20mA signal, with protocol

based on Bell 202 FSK standard.

Output current limits (to NAMUR standard)

Overload condition

- Lower limit: 3.8mA

- Upper limit: 20.5mA

Transmitter failure mode (to NAMUR standard)

The output signal can be user-selected to a value of 3.7 or 22mA on

gross transmitter failure condition, detected by self-diagnostics.

In case of CPU failure the output is driven <3.7mA or >22mA.

Electrical Characteristics and Options

HART digital communication and 4 to 20mA output

Power Supply

The transmitter operates from 10.5 to 42VDC with no load and is

protected against reverse polarity connection (additional load allows

operations over 42VDC).

For EEx ia and other intrinsically safe approval power supply must

not exceed 30VDC.

Ripple

20mV max on a 250Ω load as per HART specifications

Load limitations

4 to 20mA and HART total loop resistance :

A minimum of 250Ω is required for HART communication.

Optional indicators

Output meter

CoMeter and Prometer LCD :

5-digit (±99999 counts) programmable with 7.6mm. high (3in),

7-segment numeric characters plus sign and digital point for digital

indication of output value in percentage, current or engineer unit;

10-segment bargraph display (10% per segment) for analog

indication of output in percentage;

7-digit with 6mm. high (2.3in), 14-segment alphanumeric

characters, for engineer units and configuration display

Analog : 36mm (1.4in) scale on 90°.

Integral display

LCD, 15 lines x 56 column dot matrix providing 2 lines indication as

– top: 5-digit (numeric) plus sign or 7-digit alphanumeric

– bottom: 7-digit alphanumeric

and additional 50-segment bargraph for indication of analog output

in percentage.

User-definable matrix display mode with HART communication:

– process variable in pressure unit or

– output signal as percentage, current or engineering units

Display also indicates in/out transfer function, static pressure, sensor

temperature and diagnostic messages and provides configuration

facilities.

R(kΩ) = Supply voltage – min. operating voltage (VDC)

–––––––––––––––––––––––––––––––––––––––

22.5

(volts)

MINIMUM OPERATING VOLTAGES

10.5

with integral display

with optional output analog indicator

with optional surge protection

with ProMeter output indicator

10.7 12.3 12.5

no link on output indicator plugs

15.3

with CoMeter indicator and HART communication

13.3

2600T Pressure Transmitters

Model 264HS, 264NS SS/264HS/NS_3

PROFIBUS PA output

Device type

Pressure transmitter compliant to Profiles 3.0 Class A & B; ident.

number 052B HEX.

Power supply

The transmitter operates from 10.5 to 32VDC , polarity independent.

For EEx ia approval power supply must not exceed 17.5VDC.

Intrinsic safety installation according to FISCO model.

Current consumption

operating (quiescent): 10.5mA

fault current limiting: 20mA max.

Output signal

Physical layer in compliance to IEC 1158–2/EN 61158–2 with

transmission to Manchester II modulation, at 31.25kbit/sec.

Output interface

PROFIBUS PA communication according to Profibus DP50170 Part 2/

DIN 19245 part 1–3.

Output update time

25ms

Function blocks

2 analog input, 1 transducer, 1 physical

Integral display

LCD, 15 lines x 56 column dot matrix providing 2 lines indication as

– top: 5-digit (numeric) plus sign or 7-digit alphanumeric

– bottom: 7-digit alphanumeric

and additional 50-segment bargraph for indication of output in

percentage of the analog input function block assigned to the primary

variable.

User-definable matrix display mode:

– process variable in pressure units or

– primary variable in engineering units (output of transducer block) or

– output as percentage or engineering units of analog input function

blocks

Display also indicates diagnostic messages and provides

configuration facilities.

Secondary variable, static pressure and sensor temperature can be

read.

Transmitter failure mode

On gross transmitter failure condition, detected by self-diagnostics,

the output signal can be driven to defined conditions, selectable by the

user as safe, last valid or calculated value. If electronic failure or short

circuit occur the transmitter consumption is electronically limited at a

defined value (20mA approx), for safety of the network.

FOUNDATION Fieldbus output

Device type

LINK MASTER DEVICE

Link Active Scheduler (LAS) capability implemented.

Power supply

The transmitter operates from 9 to 32VDC, polarity independent.

For EEx ia approval power supply must not exceed 24VDC (entity

certification) or 17.5VDC (FISCO certification), according to FF–816.

Current consumption

operating (quiescent): 10.5mA

fault current limiting: 20mA max.

Output signal

Physical layer in compliance to IEC 1158–2/EN 61158–2 with

transmission to Manchester II modulation, at 31.25kbit/sec.

Function blocks/execution period

2 standard Analog Input blocks/25ms max (each)

1 standard PID block/70ms max.

Additional blocks

1 standard Resource block,

1 custom Pressure with calibration transducer block.

Number of link objects

Number of VCRs

Output interface

FOUNDATION fieldbus digital communication protocol to standard H1,

compliant to specification V. 1.5; FF registration number IT019000.

Integral display

LCD, 15 lines x 56 column dot matrix providing 2 lines indication as

– top: 5-digit (numeric) plus sign or 7-digit alphanumeric

– bottom: 7-digit alphanumeric

and additional 50-segment bargraph for indication of output in

percentage of the analog input function block assigned to the primary

variable.

User-definable matrix display mode:

– process variable in pressure units or

– primary variable in engineering units (output of transducer block) or

– output as percentage or engineering units of analog input function

blocks

Display also indicates diagnostic messages and provides

configuration facilities.

Secondary variable, static pressure and sensor temperature can be

read.

Transmitter failure mode

The output signal is "frozen" to the last valid value on gross transmitter

failure condition, detected by self-diagnostics which also indicate a

BAD conditions. If electronic failure or short circuit occur the transmitter

consumption is electronically limited at a defined value (20mA approx),

for safety of the network.

2600T Pressure Transmitters

Model 264HS, 264NS SS/264HS/NS_3

Operating influences

Ambient temperature

per 20K (36°F) change between the limits of –20°C to +65°C (–4 to

+150°F) :

Optional CoMeter and ProMeter ambient temperature

Total reading error per 20K (36°F) change between the ambient limits

of –20 and +70°C (-4 and +158°F) :

±0.15% of max span (16mA).

Supply voltage

Within voltage/load specified limits the total effect is less than

0.005% of URL per volt.

Load

Within load/voltage specified limits the total effect is negligible.

Radio frequency interference

Total effect : less than 0.10% of span from 20 to 1000MHz and for

field strengths up to 30V/m when tested with shielded conduit and

grounding, with or without meter.

Common mode interference

No effect from 100Vrms @ 50Hz, or 50VDC

Mounting position

No effect

Stability

±0.10% of URL over a thirty-six-month period

Vibration effect

±0.10% of URL (according to IEC 61298–3)

URL

Span

URL

Span

Performance specifications

Stated at reference condition to IEC 60770 ambient temperature of 20°C

(68°F), relative humidity of 65%, atmospheric pressure of 1013hPa

(1013mbar), zero based range for transmitter with isolating diaphragms in

AISI 316 L ss or Hastelloy and silicone oil fill and HART digital trim values

equal to 4–20mA span end points, in linear mode.

Unless otherwise specified, errors are quoted as % of span.

Some performance data are affected by the actual turndown (TD) as ratio

between Upper Range Limit (URL) and calibrated span.

IT IS RECOMMENDED TO SELECT THE TRANSMITTER SENSOR CODE

PROVIDING THE TURNDOWN VALUE AS LOWEST AS POSSIBLE TO

OPTIMIZE PERFORMANCE CHARACTERISTICS.

Dynamic performance (according to IEC 61298–1 definition)

Dead time: 40ms

Time constant (63.2% of total step change):

– sensor V: 150ms

– sensors M to S: ≤ 70ms

– sensor H: 100ms

– sensor G: 130ms

Response time (total) = dead time + time constant

Accuracy rating

% of calibrated span, including combined effects of terminal based

linearity, hysteresis and repeatability.

For fieldbus versions SPAN refer to analog input function block outscale

range

Model 264HS

–±0.075% for TD from 1:1 to 15:1

–±0.005% x for TD from 15:1 to 60:1

Model 264NS

–±0.075% for TD from 1:1 to 10:1

–±0.0075% x for TD from 10:1 to 20:1

ledoM rosneS

edoC

DTrof

otpu

SH462VotG1:51)naps%560.0+LRU%40.0(±

SN462SotG1:01)naps%560.0+LRU%40.0(±

2600T Pressure Transmitters

Model 264HS, 264NS SS/264HS/NS_3

Physical Specification

(Refer to ordering information sheets for variant availability related to

specific model or versions code)

Materials

Process isolating diaphragms (*)

AISI 316 L ss; Hastelloy C276™; Monel 400™;Tantalum;

Hastelloy C276™ on AISI 316 L ss gasket seat.

Process connection (*)

AISI 316 L ss; Hastelloy C276™; Monel 400™.

Sensor fill fluid

Silicone oil (DC200);

inert fill (Halocarbon 4.2™ or Galden™; carbon fluoride for sensor V)

Mounting bracket (**)

Zinc plated carbon steel with chrome passivation;

AISI 316 L ss.

Sensor housing

AISI 316 L ss.

Electronic housing and covers

Barrel version

– Copper-free content aluminium alloy with baked epoxy finish;

– Low-copper content aluminium alloy with baked epoxy finish;

– AISI 316 L ss.

Covers O-ring

Buna N.

Local zero and span adjustments:

Glass filled polycarbonate plastic (removable).

Tagging

AISI 316ss data plate attached to the electronics housing.

Calibration

Standard: at maximum span, zero based range, ambient temperature

and pressure;

Optional: at specified range and ambient conditions.

Optional extras

Mounting brackets

For 60mm. (2in) pipes or wall mounting.

Output indicator

plug-in rotatable type, LCD or analog.

Supplemental customer tag

AISI 316 ss tag screwed/fastened to the transmitter for customer's tag

data up to a maximum of 20 characters and spaces on one line for tag

number and tag name, and up to a maximum of 3 spaced strings of 10

characters each for calibration details (lower and upper values plus

unit). Special typing evaluated on request for charges.

Surge protection (only as external unit for PROFIBUS PA and FF)

Cleaning procedure for oxygen service

Test Certificates (test, design, calibration, material traceability)

Tag and manual language

Communication connectors

Process connections

1/2in NPT female or male; DIN EN837–1 G 1/2in B; adapter straight (180°)

entry; adapter angle (90°) entry.

fixing threads on adapter entries: 7/16in–20 UNF at 41.3mm centre

distance.

Electrical connections

Two 1/2 NPT or M20x1.5 or PG 13.5 or 1/2 GK threaded conduit

entries, direct on housing.

Special communication connector (on request)

– HART : straight or angle Harting Han connector and one plug.

– FOUNDATION Fieldbus, PROFIBUS PA: M12x1 or 7/8.

Terminal block

HART version: three terminals for signal/external meter wiring up to

2.5mm2 (14AWG) and three connection points for test and

communication purposes.

Fieldbus versions: two terminals for signal wiring (bus connection)

up to 2.5mm2 (14AWG)

Grounding

Internal and external 6mm2 (10AWG) ground termination points are

provided.

Mounting position

Transmitter can be mounted in any position.

Electronics housing may be rotated to any position. A positive stop

prevents over travel.

Mass (without options)

1.7kg approx (4lb); add 1.5kg (3.4lb) for AISI housing.

Add 650g (1.5lb) for packing.

Packing

Carton 26 x 26 x 18cm approx (10 x 10 x 7in).

2600T Pressure Transmitters

Model 264HS, 264NS SS/264HS/NS_3

Configuration

Transmitter with HART communication and 4 to 20 mA

Standard configuration

Transmitters are factory calibrated to customer's specified range.

Calibrated range and tag number are stamped on the tag plate. If a

calibration range and tag data are not specified, the transmitter will be

supplied with the plate left blank and configured as follows:

Engineering Unit Specify from table

4 mA Zero

20 mA Upper Range Limit (URL)

Output Linear

Damping 1 sec.

Transmitter failure mode Upscale

Software tag characters Blank

Optional LCD indicator/display 0 to 100.0% linear

Any or all the above configurable parameters, including Lower range–value

and Upper range-value which must be the same unit of measure, can be

easily changed using the HART hand–held communicator or by a PC

running the configuration software SMART VISION with DTM for 2600T.

The transmitter database is customized with specified flange type and

material, O–ring and drain/vent materials and meter code option.

Custom configuration (option)

The following data may be specified in addition to the standard

configuration parameters:

Descriptor 16 alphanumeric characters

Message 32 alphanumeric characters

Date Day, month, year

Transmitter with PROFIBUS PA communication

Transmitters are factory calibrated to customer's specified range.

Calibrated range and tag number are stamped on the tag plate. If a

calibration range and tag data are not specified, the transmitter will be

supplied with the plate left blank and configured as follows:

Measure Profile Pressure

Engineering Unit kPa

Output scale 0% Lower Range Limit (LRL)

Output scale 100% Upper Range Limit (URL)

Output Linear

Hi-Hi Limit Upper Range Limit (URL)

Hi Limit Upper Range Limit (URL)

Low Limit Lower Range Limit (LRL)

Low-Low Limit Lower Range Limit (LRL)

Limits hysteresis 0.5% of output scale

PV filter 0 sec.

Address (settable by local key) 126

Tag 32 alphanumeric characters

Any or all the above configurable parameters, including Lower range-value

and Upper range–value which must be the same unit of measure, can be

easily changed by a PC running the configuration software SMART VISION

with DTM for 2600T.

The transmitter database is customized with specified flange type and

material, O–ring and drain/vent materials and meter code option.

Custom configuration (option)

The following data may be specified in addition to the standard

configuration parameters:

Descriptor 32 alphanumeric characters

Message 32 alphanumeric characters

Date Day, month, year

Transmitter with FOUNDATION Fieldbus

communication

Transmitters are factory calibrated to customer's specified range.

Calibrated range and tag number are stamped on the tag plate. If a

calibration range and tag data are not specified, the transmitter will be

supplied with the plate left blank and the analog input function block FB1

is configured as follows:

Measure Profile Pressure

Engineering Unit kPa

Output scale 0% Lower Range Limit (LRL)

Output scale 100% Upper Range Limit (URL)

Output Linear

Hi-Hi Limit Upper Range Limit (URL)

Hi Limit : Upper Range Limit (URL)

Low Limit Lower Range Limit (LRL)

Low-Low Limit Lower Range Limit (LRL)

Limits hysteresis 0.5% of output scale

PV filter time 0 sec.

Tag 32 alphanumeric characters

The analog input function block FB2 is configured for the sensor tempe-

rature measured in °C. Any or all the above configurable parameters,

including the range values, can be changed using any host compliant to

FOUNDATION fieldbus. The transmitter database is customized with

specified flange type and material, O–ring and drain/vent materials and

meter code option.

For any protocol available engineering units of pressure measure are :

Pa, kPa, MPa

inH2O@4°C, mmH2O@4°C, psi

inH2O@20°C, ftH2O@20°C, mmH2O@20°C

inHg, mmHg, Torr

g/cm2, kg/cm2, atm

mbar, bar

™ Hastelloy is a Cabot Corporation trademark

™ Monel is an International Nickel Co. trademark

™ DC 200 is a Dow Corning Corporation trademark

™ Galden is a Montefluos trademark

™ Halocarbon is a Halocarbon Products Co. trademark

(*) Wetted parts of the transmitter.

(**) U-bolt material: AISI 400 ss; screws material: high-strength alloy steel or

AISI 316 ss.

2600T Pressure Transmitters

Model 264HS, 264NS SS/264HS/NS_3

18 (0.71) 100 (3.94)

ø 65 (2.56)

135 (5.31)

16 (0.63)

57 (2.24)

127 (5.00)

17 (0.67)

26 (1.02)

17 (0.67)

36 (1.42)

19 (0.75)

36 (1.42)

MOUNTING DIMENSIONS (not for construction unless certified) – dimensions in mm (in)

Transmitter with barrel housing on bracket for 60mm (2in) pipe mounting

Certification

label

Identification tag

Adjustments

Terminal

side

Electronic

side

Integral

display

housing

Min. clearance

to remove

the cover

Output meter

housing

Electrical

connections

1/2in – 14 NPT female connection for sensors G, H, M, P, Q, S

86 (3.39)

CH 32

Covers locking

screw

Certification

label

Identification tag

Adjustments

Terminal

side

Electronic

side

Integral

display

housing

Min. clearance

to remove

the cover

Output meter

housing

Electrical

connections

1/2in – 14 NPT female connection for sensor V (NOT FOR 264NS)

Covers locking

screw

100 (3.94)

56 (2.20)

135 (5.31)

50 (1.97)

127 (5.00)

17 (0.67)

26 (1.02)

17 (0.67)

36 (1.42)

86 (3.39)

CH27

2600T Pressure Transmitters

Model 264HS, 264NS SS/264HS/NS_3

Electrical

connections

Covers locking

screw

Certification

label

Identification tag

Adjustments

Terminal

side

Electronic

side

Integral

display

housing

Min. clearance

to remove

the cover

Output meter

housing

DIN–EN837–1 G 1/2in B connection for sensors G, H, M, P, Q, S

86 (3.39)

CH 32

18 (0.71) 100 (3.94)

135 (5.31)

16 (0.63)

G 1/2"B

57 (2.24)

42 (1.65)

ø 17.5 (0.69)

ø 65 (2.56)

57 (2.24)

127 (5.00)

17 (0.67)

26 (1.02)

17 (0.67)

36 (1.42)

Certification

label

Identification tag

Adjustments

Terminal

side

Electronic

side

Integral

display

housing

Min. clearance

to remove

the cover

Output meter

housing

Electrical

connections

Covers locking

screw

100 (3.94)

56 (2.20)

135 (5.31)

58 (2.28)

127 (5.00)

17 (0.67)

26 (1.02)

17 (0.67)

36 (1.42)

86 (3.39)

CH22

G 1/2" B

DIN–EN837–1 G 1/2in B connection for sensor V (NOT FOR 264NS)

2600T Pressure Transmitters

Model 264HS, 264NS SS/264HS/NS_3

Certification

label

Identification tag

Adjustments

Terminal

side

Electronic

side

Integral

display

housing

Min. clearance

to remove

the cover

Output meter

housing

Electrical

connections

Covers locking

screw

86 (3.39)

CH 32

1/2 in – 14 NPT male connection for sensors G, H, M, P, Q, S

Electrical

connections

Covers locking

screw

Certification

label

Identification tag

Adjustments

Terminal

side

Electronic

side

Integral

display

housing

Min. clearance

to remove

the cover

Output meter

housing

1/2 in – 14 NPT male connection for sensor V (NOT FOR 264NS)

100 (3.94)

135 (5.31)

55 (2.17)

127 (5.00)

17 (0.67)

26 (1.02)

17 (0.67)

36 (1.42)

56 (2.20)

86 (3.39)

CH22

18 (0.71) 100 (3.94)

135 (5.31)

16 (0.63)

1/2" - 14 NPT

ø 65 (2.56)

57 (2.24)

127 (5.00)

17 (0.67)

26 (1.02)

17 (0.67)

36 (1.42)

39 (1.54)

54 (2.13)

2600T Pressure Transmitters

Model 264HS, 264NS SS/264HS/NS_3

Adapter angle (90

) entry connection (7/16in – 20 UNF drilling) for sensors G, H, M, P, Q, S

18 (0.71) 100 (3.94)

49.5 (1.95)

ø 41.3

(1.63)

ø 39 (1.54)

135 (5.31)

31 (1.22)

127 (5.00)

17 (0.67)

26 (1.02)

17 (0.67)

36 (1.42)

16 (0.63)

42.5 (1.67)

86 (3.39)

ø 65 (2.56)

Electrical

connections

Covers locking

screw

Certification

label

Identification tag

Adjustments

Terminal

side

Electronic

side

Integral

display

housing

Min. clearance

to remove

the cover

Output meter

housing

Adapter straight (180

) entry connection (7/16in – 20 UNF drilling) for sensors G, H, M, P, Q, S

Certification

label

Identification tag

Adjustments

Terminal

side

Electronic

side

Integral

display

housing

Min. clearance

to remove

the cover

Output meter

housing

Electrical

connections

Covers locking

screw

18 (0.71) 100 (3.94)

16 (0.63)

ø 41.3

ø 65 (2.56)

135 (5.31)

17.5 (0.69)

127 (5.00)

17 (0.67)

26 (1.02)

17 (0.67)

36 (1.42)

34 (1.34)

86 (3.39)

57 (2.24)

ø 65 (2.56)

2600T Pressure Transmitters

Model 264HS, 264NS SS/264HS/NS_3

Electrical connections

HART Version

FIELDBUS Versions

691HT

A B C

1D E F

2G H I

J K L

4M N O

5P Q R

S T U

7V W X

8Y Z #

@ % & /

REVIEW SERIAL

LINK

TRIM

F1 F2 F3 F4

CONF

Kent-Taylor

100

M+

54 6

238

TEST COMM

Internal ground

termination point

Fieldbus line

(polarity independent)

External ground

termination point

Test points

4 to 20mA

Harting

pin (male)

identification

Internal ground

termination point

External ground

termination point

Hand-held

communicator

GND

Line load

Remote

indicator

Power

source

250 ohm min

Receiver

HART hand-held communicator may be connected at any wiring termination point in the loop, providing the minimum resistance

is 250 ohm. If this is less than 250 ohm, additional resistance should be added to allow communications

Optional

BUS CONNECTIONS

7/8” connector

M12 x 1 connector

NOITACIFITNEDI)elam(NIP

NOITADNUOF

subdleiF

SUBIFORP

-FF

+FF

DLEIHS

DNUORG

+AP

DNUORG

–AP

DLEIHS

Mating female plug NOT SUPPLIED

2600T Pressure Transmitters

Model 264HS, 264NS SS/264HS/NS_3

BASIC ORDERING INFORMATION model 264HS Gauge Pressure Transmitter

Select one character or set of characters from each category and specify complete catalog number.

Refer to additional ordering information code and specify one or more codes for each transmitter if additional options are required.

LEDOMESAB 1–

5ot

sretcarahc 2 6 4 H SXXXXX

%570.0YCARUCCAESAB–rettimsnarTerusserPeguaG

–stimilnapS-ROSNES 6

retcarahc

aPk56dna56.0

aPk061dna6.1

aPk006dna6

aPk0042dna42

aPk0008dna08

aPk00061dna061

aPk00006dna006

rabm056dna5.6

rabm0061dna61

rab6dna60.0

rab42dna42.0

rab08dna8.0

rab061dna6.1

rab006dna6

Hni062dna6.2

Hni246dna4.6

isp78dna78.0

isp843dna5.3

isp0611dna6.11

isp0232dna2.32

isp0078dna78

)strapdettew(diulflliF/lairetammgarhpaiD 7–

retcarahc

ssL613ISIA

)taesISIAno(™672CyolletsaH

™672CyolletsaH

™004lenoM

mulatnaT

ssL613ISIA

)taesISIAno(™672CyolletsaH

™672CyolletsaH

™004lenoM

mulatnaT

ssL613ISIA

)taesISIAno(™672CyolletsaH

™672CyolletsaH

™004lenoM

mulatnaT

lioenociliS

nedlaG-diulftrenI

)VrosnesrofediroulfnobraC(nedlaG-diulftrenI

nedlaG-diulftrenI

nobracolaH-diulftrenI

)2etoN(

)2,1setoN(

)1etoN(

)2,1setoN(

ECAN

)strapdettew(lairetamnoitcennocssecorP –8

retcarahc

ssL613ISIA

™672CyolletsaH

™004lenoM

elamefTPNni

elamTPNni

G1–738NENID

Bni

)tekcarbrofelbaliavaton(yrtne)°081(thgiartsretpadA

yrtne)°09(elgnaretpadA

elamefTPNni

elamTPNni

G1–738NENID

Bni

)tekcarbrofelbaliavaton(yrtne)°081(thgiartsretpadA

yrtne)°09(elgnaretpadA

elamefTPNni

elamTPNni

G1–738NENID

Bni

)3etoN(

)3,2setoN(

)4etoN(

)4,2setoN(

)5etoN(

ECAN

noitcennoclacirtcelednalairetamgnisuoH 9–

retcarahc

)noisrevlerraB(yollamuinimulA

TPNni

)02MC(5.1x02M

5.31gP

KGni

rotcennocnaHgnitraH

rotcennocsubdleiF

)ylnoesopruplareneg()6etoN(

)noisrevlerraB(eerf-reppocyollamuinimulA

TPNni

)02MC(5.1x02M

5.31gP

KGni

rotcennocnaHgnitraH

rotcennocsubdleiF

)ylnoesopruplareneg()6etoN(

)noisrevlerraB(ssL613ISIA

TPNni

)02MC(5.1x02M

5.31gP

KGni

rotcennocsubdleiF )ylnoesopruplareneg()6etoN(

snoitpolanoitiddA/tuptuO 01–

retcarahc

Am02ot4dnanoitacinummoclatigidTRAH

APSUBIFORP

subdleiFNOITADNUOF

snoitpolanoitiddaoN

)"edocgniredrolanoitiddA"ybderedroebot(detseuqersnoitpO

snoitpolanoitiddaoN

)"edocgniredrolanoitiddA"ybderedroebot(detseuqersnoitpO

snoitpolanoitiddaoN

)"edocgniredrolanoitiddA"ybderedroebot(detseuqersnoitpO

)8,7setoN(

)7etoN(

)8,7setoN(

)8etoN(

)8,7setoN(

)8etoN(

2600T Pressure Transmitters

Model 264HS, 264NS SS/264HS/NS_3

ADDITIONAL ORDERING INFORMATION for model 264HS

Add one or more 2-digit code(s) after the basic ordering information to select all required options

XXXX XXXX XXXX XXXX XXXX XXXX XXXX

)strapdettew(evlavtnev/niarD

ssL613ISIA

™672CyolletsaH

™004lenoM

)9,2setoN(

)01,2setoN(

)11,2setoN(

ECAN

noitacifitreclacirtcelE

aixEEytefaScisnirtnI–DG1yrogetaCIIpuorGXETA

dxEEfoorpemalF–DG2/1yrogetaCIIpuorGXETA

)21etoN((ecnailpmocngisedLnxEE"N"noitcetorpfoepyT–DG3yrogetaCIIpuorGXETA

ylno()ASC(noitaicossAdradnatSnaidanaC

)gnisuoh5.31gPdna02M,TPNni

)21etoN(5T/6TCIIdxE+4T/5T/6TCIIaixEAASailartsuAsdradnatSotfoorpemalF–ytefaScisnirtnI

htiwylno(lavorppa)MF(lautuMyrotcaF

)noitcennoclacirtcele5.31gPdna02M,TPNni

retemtuptuO

noitarbilacdradnatS,reteMorP

noitarbilaclaicepS,reteMorP

elacs%001–0raenilrotacidnituptuogolanA

)elacsraenilrofdeificepsebot(noitaudarglaiceps,rotacidnituptuogolanA

)reteMoC(rotarugifnocTRAHdnaretemlangiselbammargorP

)noitarugifnocremotsuc–reteMoC(rotarugifnocTRAHdnaretemlangiselbammargorP

)21etoN(

DCLlargetnI

yalpsidlargetniDCLlatigiD 1L

)lairetamdnaepahs(tekcarbgnitnuoM

gnitnuomepiproF

)gnisuohISIArofelbatiustoN( leetsnobraC

ssL613ISIA

egruS

rotcetorPtneisnarT/egruS )21etoN( 1S

launamgnitarepO

namreG

nailatI

hcnerF

egaugnalgat&slebaL

namreG

nailatI

hcnerF

etalpgatlanoitiddA

etalpleetssselniatsnogatfognitnirpresaL 2I

noitarugifnoC

Hni=erusserP–dradnatS

F.ged=erutarepmeT;C°02taisp/O

Hni=erusserP–dradnatS

F.ged=erutarepmeT;C°4taisp/O

Hni=erusserP–dradnatS

C.ged=erutarepmeT;C°02taisp/O

Hni=erusserP–dradnatS

C.ged=erutarepmeT;C°4taisp/O

motsuC

erudecorpnoitaraperP

)lliftrenihtiwelbaliavaylno(gninaelcecivresnegyxO

xam

T;ediroulfnobraCrofaPM12ronobracolaHrofaPM9,nedlaGrofaPM21=

xam

F°041/C°06=

setacifitreC

)tniop-9(noitarbilacfoB.1.3–40201NEetacifitrecnoitcepsnI

ngisedtnemurtsnifo1.2–40201NEredroehthtiwecnailpmocfoetacifitreC

ytilibaecartlairetaM

strapdettewssecorpfo1.2–40201NEredroehthtiwecnailpmocfoetacifitreC

strapdettewssecorpfoB.1.3–40201NEetacifitrecnoitcepsnI

rotcennoC

8/7subdleiF

1x21MsubdleiF

yrtnethgiarts–naHgnitraH

yrtneelgna–naHgnitraH

)subdleiFNOITADNUOFrofDEDNEMMOCER(

)APSUBIFORProfDEDNEMMOCER(

)31,8setoN(

)31,7setoN(

2600T Pressure Transmitters

Model 264HS, 264NS SS/264HS/NS_3

Note 1: Suitable for oxygen service

Note 2: Not available with Sensor code V

Note 3: Not available with Hastelloy C, Monel and Tantalum diaphragm code K, T, F, D, P, M, C, 4, 5 combined with sensor codes G to S

Note 4: Not available with AISI 316 L ss, Hastelloy C on AISI seat and Monel diaphragm code S, H, A, B, L, Q, M, C, 4

Note 5: Not available with AISI 316 L ss, Hastelloy C on AISI seat, Hastelloy C and Tantalum diaphragm code S, H, K, T, A, B, F, D, L, Q, P, 5

Note 6: Select type in additional ordering code

Note 7: Not available with Electronic Housing code Z, R, G

Note 8: Not available with Electronic Housing code P, E

Note 9: Not available with Process connection code E, K, D, F, C, 1, 2, 3

Note 10: Not available with Process connection code B, T, A, P, N, 1, 2, 3

Note 11: Not available with Process connection code E, K, D, F, C, B, T, A, P, N

Note 12: Not available with PROFIBUS PA and FF output code 2 or 3

Note 13: Not available with Electronic housing code U, S, T, V, H, M, L, N, D, C, A, B

™ Hastelloy is a Cabot Corporation trademark

™ Monel is an International Nickel Co. trademark

™ Galden is a Montefluos trademark

™ Halocarbon is a Halocarbon Products Co. trademark

Standard delivery items (can be differently specified by additional ordering code)

– No drain/vent valve

– General purpose (no electrical certification)

– No meter/display, no mounting bracket, no surge protection

– English manual and labels

– Configuration with kPa and deg. C units

– No test, inspection or material traceability certificates

THE SELECTION OF SUITABLE WETTED PARTS AND FILLING FLUID FOR COMPATIBILITY WITH THE PROCESS MEDIA IS A CUSTOMER'S

RESPONSIBILITY, IF NOT OTHERWISE NOTIFIED BEFORE MANUFACTURING.

2600T Pressure Transmitters

Model 264HS, 264NS SS/264HS/NS_3

BASIC ORDERING INFORMATION model 264NS Absolute Pressure Transmitter

Select one character or set of characters from each category and specify complete catalog number.

Refer to additional ordering information code and specify one or more codes for each transmitter if additional options are required.

LEDOMESAB 1–

5ot

sretcarahc 2 6 4 N SXXXXX

%570.0YCARUCCAESAB–rettimsnarTerusserPetulosbA

–stimilnapS-ROSNES 6

retcarahc

aPk56dna1.1

aPk061dna76.2

aPk006dna01

aPk0042dna04

aPk0008dna431

aPk00061dna762

rabm056dna11

rabm0061dna7.62

rab6dna1.0

rab42dna4.0

rab08dna43.1

rab061dna76.2

gHmm084dna8

gHmm0021dna02

isp78dna54.1

isp843dna8.5

isp0611dna4.91

isp0232dna7.83

)strapdettew(diulflliF/lairetammgarhpaiD 7–

retcarahc

ssL613ISIA

)taesISIAno(™672CyolletsaH

™672CyolletsaH

ssL613ISIA

)taesISIAno(™672CyolletsaH

™672CyolletsaH

ssL613ISIA

)taesISIAno(™672CyolletsaH

™672CyolletsaH

lioenociliS

nedlaG-diulftrenI

nobracolaH-diulftrenI

)1etoN(

ECAN

)strapdettew(lairetamnoitcennocssecorP –8

retcarahc

ssL613ISIA

™672CyolletsaH

elamefTPNni

elamTPNni

G1–738NENID

Bni

)tekcarbrofelbaliavaton(yrtne)°081(thgiartsretpadA

yrtne)°09(elgnaretpadA

elamefTPNni

elamTPNni

G1–738NENID

Bni

)tekcarbrofelbaliavaton(yrtne)°081(thgiartsretpadA

yrtne)°09(elgnaretpadA

)2etoN(

)3etoN(

ECAN

noitcennoclacirtcelednalairetamgnisuoH 9–

retcarahc

)noisrevlerraB(yollamuinimulA

TPNni

)02MC(5.1x02M

5.31gP

KGni

rotcennocnaHgnitraH

rotcennocsubdleiF

)ylnoesopruplareneg()4etoN(

)noisrevlerraB(eerf-reppocyollamuinimulA

TPNni

)02MC(5.1x02M

5.31gP

KGni

rotcennocnaHgnitraH

rotcennocsubdleiF

)ylnoesopruplareneg()4etoN(

)noisrevlerraB(ssL613ISIA

TPNni

)02MC(5.1x02M

5.31gP

KGni

rotcennocsubdleiF )ylnoesopruplareneg()4etoN(

snoitpolanoitiddA/tuptuO 01–

retcarahc

Am02ot4dnanoitacinummoclatigidTRAH

APSUBIFORP

subdleiFNOITADNUOF

snoitpolanoitiddaoN

)"edocgniredrolanoitiddA"ybderedroebot(detseuqersnoitpO

snoitpolanoitiddaoN

)"edocgniredrolanoitiddA"ybderedroebot(detseuqersnoitpO

snoitpolanoitiddaoN

)"edocgniredrolanoitiddA"ybderedroebot(detseuqersnoitpO

)6,5setoN(

)5etoN(

)6,5setoN(

)6etoN(

)6,5setoN(

)6etoN(

2600T Pressure Transmitters

Model 264HS, 264NS SS/264HS/NS_3

ADDITIONAL ORDERING INFORMATION for model 264NS

Add one or more 2-digit code(s) after the basic ordering information to select all required options

XXXX XXXX XXXX XXXX XXXX XXXX XXXX

)strapdettew(evlavtnev/niarD

ssL613ISIA

™672CyolletsaH

)7etoN(

)8etoN(

ECAN

noitacifitreclacirtcelE

aixEEytefaScisnirtnI–DG1yrogetaCIIpuorGXETA

dxEEfoorpemalF–DG2/1yrogetaCIIpuorGXETA

)9etoN(ecnailpmocngisedLnxEE"N"noitcetorpfoepyT–DG3yrogetaCIIpuorGXETA

ylno()ASC(noitaicossAdradnatSnaidanaC

)gnisuoh5.31gPdna02M,TPNni

)9etoN(5T/6TCIIdxE+4T/5T/6TCIIaixEAASailartsuAsdradnatSotfoorpemalF–ytefaScisnirtnI

htiwylno(lavorppa)MF(lautuMyrotcaF

)noitcennoclacirtcele5.31gPdna02M,TPNni

retemtuptuO

noitarbilacdradnatS,reteMorP

noitarbilaclaicepS,reteMorP

elacs%001–0raenilrotacidnituptuogolanA

)elacsraenilrofdeificepsebot(noitaudarglaiceps,rotacidnituptuogolanA

)reteMoC(rotarugifnocTRAHdnaretemlangiselbammargorP

)noitarugifnocremotsuc–reteMoC(rotarugifnocTRAHdnaretemlangiselbammargorP

)9etoN(

DCLlargetnI

yalpsidlargetniDCLlatigiD 1L

)lairetamdnaepahs(tekcarbgnitnuoM

gnitnuomepiproF

)gnisuohISIArofelbatiustoN( leetsnobraC

ssL613ISIA

egruS

rotcetorPtneisnarT/egruS )9etoN( 1S

launamgnitarepO

namreG

nailatI

hcnerF

egaugnalgat&slebaL

namreG

nailatI

hcnerF

etalpgatlanoitiddA

etalpleetssselniatsnogatfognitnirpresaL 2I

noitarugifnoC

Hni=erusserP–dradnatS

F.ged=erutarepmeT;C°02taisp/O

Hni=erusserP–dradnatS

F.ged=erutarepmeT;C°4taisp/O

Hni=erusserP–dradnatS

C.ged=erutarepmeT;C°02taisp/O

Hni=erusserP–dradnatS

C.ged=erutarepmeT;C°4taisp/O

motsuC

erudecorpnoitaraperP

P–)lliftrenihtiwelbaliavaylno(gninaelcecivresnegyxO

xam

T;nobracolaHrofaPM9ronedlaGrofaPM21=

xam

F°041/C°06= 1P

setacifitreC

)tniop-9(noitarbilacfoB.1.3–40201NEetacifitrecnoitcepsnI

ngisedtnemurtsnifo1.2–40201NEredroehthtiwecnailpmocfoetacifitreC

ytilibaecartlairetaM

strapdettewssecorpfo1.2–40201NEredroehthtiwecnailpmocfoetacifitreC

strapdettewssecorpfoB.1.3–40201NEetacifitrecnoitcepsnI

rotcennoC

8/7subdleiF

1x21MsubdleiF

yrtnethgiarts–naHgnitraH

yrtneelgna–naHgnitraH

)subdleiFNOITADNUOFrofDEDNEMMOCER(

)APSUBIFORProfDEDNEMMOCER(

)01,6setoN(

)01,5setoN(

2600T Pressure Transmitters

Model 264HS, 264NS SS/264HS/NS_3

Note 1: Suitable for oxygen service

Note 2: Not available with Hastelloy C diaphragm code K, F, P

Note 3: Not available with AISI 316 L ss and Hastelloy C on AISI seat diaphragm code S, H, A, B, L, Q

Note 4: Select type in additional ordering code

Note 5: Not available with Electronic Housing code Z, R, G

Note 6: Not available with Electronic Housing code P, E

Note 7: Not available with Process connection code E, K, D, F, C

Note 8: Not available with Process connection code B, T, A, P, N

Note 9: Not available with PROFIBUS PA and FF output code 2 or 3

Note 10: Not available with Electronic housing code U, S, T, V, H, M, L, N, D, C, A, B

™ Hastelloy is a Cabot Corporation trademark

™ Galden is a Montefluos trademark

™ Halocarbon is a Halocarbon Products Co. trademark

Standard delivery items (can be differently specified by additional ordering code)

– No drain/vent valve

– General purpose (no electrical certification)

– No meter/display, no mounting bracket, no surge protection

– English manual and labels

– Configuration with kPa and deg. C units

– No test, inspection or material traceability certificates

THE SELECTION OF SUITABLE WETTED PARTS AND FILLING FLUID FOR COMPATIBILITY WITH THE PROCESS

MEDIA IS A CUSTOMER'S RESPONSIBILITY, IF NOT OTHERWISE NOTIFIED BEFORE MANUFACTURING.

2600T Pressure Transmitters

Model 264HS, 264NS SS/264HS/NS_3

ABB Ltd

Howard Road, St. Neots

Cambridgeshire, PE19 3EU

Tel: +44(0)1480 475321

Fax: +44(0)1480 217948

ABB Inc.

125 E. County Line Road

Warminster, PA 18974

USA

Tel: +1 215 674 6000

Fax: +1 215 674 7183

ABB SACE spa

Business Unit Instrumentation

Via Statale 113

22016 Lenno (CO) Italy

Tel: +39 0344 58111

Fax: +39 0344 56278

SS/264HS/NS_3

ABB has Sales & Customer Support

expertise in over 100 countries worldwide

www.abb.com/instrumentation

The Company’s policy is one of continuous product

improvement and the right is reserved to modify the

information contained herein without notice.

Printed in Italy (04.04)