DC/DC Converters TEN 15WI Series, 15 Watt RoHS compliant pending Features Ultrawide 4 : 1 Input Range High Efficiency up to 86% Extended Operating Temperature Range - 40C to +85C Indefinite Short-Circuit Protection I/O-Isolation 1500 VDC Input Filter meets EN 55022, Class A and FCC, Level A without external Components Remote On/Off Industry Standard Pinout Six-Side Shielded Case Lead free Design - RoHS compliant 3 Year Product Warranty The TEN 15WI series of DC/DC converters, comprising 10 different models, has been designed for a wide range of applications including communications, industrial systems and battery powered equipments. Full SMD-design with use of ceramic chip capacitors guarantees a high reliability and a long lifetime. Other features of this converters are internal filter to meet EN 55022, class A and FCC, level A and an extended temperature range of -40C to +85C. Models Ordercode Output voltage Output current max. Efficiency typ. TEN 15-2410WI 3,3 VDC 3'000 mA 78 % TEN 15-2411WI 5,1 VDC 2`950 mA 82 % TEN 15-2412WI Input voltage range 9 - 36 VDC 12 VDC 1'250 mA 85 % TEN 15-2422WI 12 VDC 625 mA 85 % TEN 15-2423WI 15 VDC 500 mA 86 % TEN 15-4810WI 3,3 VDC 3'000 mA 78 % TEN 15-4811WI 5,1 VDC 2`950 mA 82 % TEN 15-4812WI 18 - 75 VDC 12 VDC 1'250 mA 85 % TEN 15-4822WI 12 VDC 625 mA 85 % TEN 15-4823WI 15 VDC 500 mA 86 % http://www.tracopower.com Page 1 of 3 DC/DC Converters TEN 15WI 15 Watt Input Specifications Input current at no load Input current at full load 24 Vin models: 25 mA typ. 48 Vin models: 15 mA typ. 24 Vin; 24 Vin; 48 Vin; 48 Vin; 3.3 Vout other output 3.3 Vout other output Surge voltage (100 msec. max.) models: models: models: models: 528 mA typ. 740 mA typ. 264 mA typ. 370 mA typ. 24 Vin models: 50 V max. 48 Vin models: 100 V max. Conducted noise (input) EN 55022 level A, FCC part 15, level A Output Specifications Voltage set accuracy Regulation 1% - Input variation Vin min. to Vin max. - Load variation 10 - 100 % 0.5 % max. 1 % max. Ripple and noise (20 MHz Bandwidth) 80 mVpk-pk max. Temperature coefficient 0.02 % / K Output current limitation > 110% of Iout max., foldback Short circuit protection indefinite (automatic recovery) Capacitive load single output models: 470 F max. dual output models: 220 F max. General Specifications Temperature ranges - Operating - Case temperature - Storage - 40 C ... + 85 C + 100 C max. - 55 C ... + 125 C Derating 3.5%/K above 70C Humidity (non condensing) 95 % rel H max. Reliability, calculated MTBF (MIL-HDBK-217 E) > 700'000 h @ + 25 C Isolation voltage - Input/Output 1`500 VDC Isolation capacity - Input/Output 1200 pF typ Isolation resistance - Input/Output (500 VDC) > 1'000 MOhm Switching frequency (fixed) Remote On/Off: 330 kHz typ. (pulse width modulation) - On: - Off: - Off idle current: 2.5 ... 5.5 VDC or open circuit. -0.7 ... 0.8 VDC or short circuit pin 2 and pin 6 10 mA max. Safety standards UL 60950, EN 60950, IEC 6095 (Compliance up to 60 VDC input voltage(SELV limit) Safety approvals UL /cUL pending All specifications valid at nominal input voltage, full load and +25C after warm-up time unless otherwise stated. http://www.tracopower.com Page 2 of 3 DC/DC Converters TEN 15WI 15 Watt Physical Specifications Case material copper, Nickel plated Baseplate material non conductive FR4 Potting material epoxy (flammability to UL 94V-0) Weight 32g (1.09oz) Soldering temperature max. 260 C / 10 sec. Outline Dimensions 50.8 15.2 (0.80) (0.60) 10.2 20.32 25.4 (1.00) Pin-Out 6.0 5 (0.24) 6 (0.40) 4 (0.40) 1 2 10.16 10.16 3 Bottom View (0.40) 7.62 (0.30) (0.30) 7.62 2.5 (0.10) 5.08 (0.20) (2.0) Insulated baseplate Pin Single Dual 1 +Vin (Vcc) +Vin (Vcc) 2 -Vin (GND) -Vin (GND) 3 +Vout +Vout 4 No pin Common 5 -Vout -Vout 6 Remote On/Off Dimensions in [mm], () = Inch Pin diameter: 1.0 0.05 (0.02 0.002) Pin pitsch tolerances: 0.25 (0.01) Case tolerances: 0.5 (0.02) Specifications can be changed without notice Rev. 07/05.2 Jenatschstrasse 1 * CH-8002 Zurich * Switzerland Tel. +41 43311 4511 * Fax +41 43311 4545 * info@traco.ch * www.tracopower.com Page 3 of 3