LT119A/LT319A LM119/LM319 Dual Comparator FEATURES n n n n n DESCRIPTION Guaranteed Maximum 0.5mV Input Offset Voltage Input Protection Diodes Operates From Single 5V Supply 25mA Drive Capability 80ns Response Time APPLICATIONS n n n n Window Detectors High Speed One Shot Relay/Lamp Drivers Voltage Controlled Oscillators The LT(R)119A is an improved version of the LM119 dual comparator. It features lower input offset voltage and offset current, higher voltage gain, guaranteed common mode rejection and input protection diodes. The LT119A is capable of operation over a supply range from 5V to 15V and can drive 25mA loads from each open collector output. A separate ground pin allows the LT119A to isolate system grounds. Linear Technology Corporation's advanced processing, design techniques and reliability make the LT119A/LT319A an ideal choice over previous devices in most comparator applications. L, LT, LTC, LTM, Linear Technology and the Linear logo are registered trademarks of Linear Technology Corporation. All other trademarks are the property of their respective owners. TYPICAL APPLICATION Window Detector* Response Time For Various Input Overdrives 6 5V 3 10 + 500 1 1/2 LT319A VIN 4 - TTL OUTPUT 2 5 OUTPUT VOLTAGE (V) VUT 2mV 4 3 2 5mV 20mV 8 VLT 9 + 6 1/2 LT319A - VOUT = 5V FOR VLT VIN VUT VOUT = 0V FOR VIN VLT OR VIN VUT 7 5 INPUT VOLTAGE (mV) 1 VS = 15V RL = 500 V + + = 5V TA = 25C 0 100 50 0 0 LT119/319 TA1 50 100 150 200 250 300 350 TIME (ns) LT119/319 TA2 *ALLOWED WINDOW FOR SINGLE 5V SUPPLY IS 1.2V TO 3.8V 119a319afc 1 LT119A/LT319A LM119/LM319 ABSOLUTE MAXIMUM RATINGS (Note 1) Supply Voltage...........................................................36V Output to Negative Supply Voltage............................36V Ground to Negative Supply Voltage...........................25V Ground to Positive Supply Voltage.............................18V Differential Input Voltage (Note 6).............................5V Differential Input Current (Note 6)..........................5mA Input Voltage (Note 2) Output Short-Circuit Duration.................................... 10s Operating Temperature Range LT119A, LM119 OBSOLETE........... -55C to 125C LT319A, LM319......................................... 0C to 70C Storage Temperature Range................... -65C to 150C Lead Temperature (Soldering, 10 sec).................... 300C PIN CONFIGURATION TOP VIEW TOP VIEW NC 1 14 NC NC 2 13 NC GND 3 12 OUTPUT 1 +INPUT 1 4 11 V + - INPUT 1 5 10 - INPUT 2 V- 6 9 +INPUT 2 OUTPUT 2 7 8 GND 2 OUTPUT 1 TOP VIEW V+ 1 10 9 -INPUT 2 8 +INPUT 2 GND 2 N PACKAGE 14-LEAD PLASTIC DIP 4 5 V- 6 14 NC 2 13 NC GND 3 12 OUTPUT 1 11 V + 7 GND 2 +INPUT 1 -INPUT 1 5 10 - INPUT 2 OUTPUT 2 V- 6 9 +INPUT 2 OUTPUT 2 7 8 GND 2 H PACKAGE 10-LEAD TO-5 METAL CAN TJMAX = 150C, JA = 150C/W, JC = 45C/W OBSOLETE PACKAGE TJMAX = 150C, JA = 100C/W 1 NC 4 +INPUT 1 3 -INPUT 1 NC J PACKAGE 14-LEAD CERAMIC DIP TJMAX = 150C, JA = 100C/W OBSOLETE PACKAGE ORDER INFORMATION LEAD FREE FINISH PART MARKING PACKAGE DESCRIPTION SPECIFIED TEMPERATURE RANGE LT319AN#PBF LT319AN 14-Lead Plastic DIP 0C to 70C LM319N#PBF LM319N 14-Lead Plastic DIP 0C to 70C OBSOLETE PACKAGES LT119AH#PBF LT119AH 10-Lead TO-5 Metal Can -55C to 125C LM119H#PBF LM119H 10-Lead TO-5 Metal Can -55C to 125C LT319AH#PBF LT319AH 10-Lead TO-5 Metal Can 0C to 70C LM319H#PBF LM319H 10-Lead TO-5 Metal Can 0C to 70C LT119AJ#PBF LT119AJ 14-Lead Ceramic DIP -55C to 125C LM119J#PBF LM119J 14-Lead Ceramic DIP -55C to 125C LT319AJ#PBF LT319AJ 14-Lead Ceramic DIP 0C to 70C LM319J#PBF LM319J 14-Lead Ceramic DIP 0C to 70C Consult LTC Marketing for parts specified with wider operating temperature ranges. Consult LTC Marketing for information on nonstandard lead based finish parts. For more information on lead free part markings, go to: http://www.linear.com/leadfree/ For more information on tape and reel specifications, go to: http://www.linear.com/tapeandreel/ 119a319afc 2 LT119A/LT319A LM119/LM319 ELECTRICAL CHARACTERISTICS The l denotes the specifications which apply over the full operating temperature range, otherwise specifications are at TA = 25C. (Note 3) SYMBOL VOS PARAMETER Input Offset Voltage CMRR IOS Common Mode Rejection Ratio Input Offset Current CONDITIONS VS = 15V, VCM = 0 (Note 4) l (Note 4) l IB Input Bias Current (Note 4) l AV VSAT Voltage Gain Response Time Saturation Voltage Output Leakage Current (Note 5) VIN -5mV, IO = 25mA, V+ 4.5V, V- = 0V VIN -6mV, ISINK 3.2mA TA 0C TA 0C VIN 5mV, VOUT to V- = 35V LT119A MIN TYP MAX 0.3 0.5 0.5 1.0 1.2 2.0 90 106 20 40 75 150 500 1000 20 40 80 0.75 1.5 LM119 MIN TYP MAX 4 0.7 4 7 0.23 0.23 l Input Voltage Range IS Differential Input Voltage Supply Current Positive Supply Current Negative Supply Current VS = 15V V+ = 5V, V- = 0V l l -12 1 0.2 1 13 l V+ = 5V, V- = 0V VS = 15V VS = 15V 4.3 8 3 0.4 0.6 2 10 12 3 5 30 150 10 -12 1 40 80 0.75 0.2 1 13 4.3 8 3 11.5 4.5 75 100 500 1000 1.5 0.4 0.6 2 10 12 3 5 11.5 4.5 SYMBOL mV mV mV dB nA nA nA nA V/mV ns V V V A A V V V mA mA mA The l denotes the specifications which apply over the full operating temperature range, otherwise specifications are at TA = 25C. (Note 3) SYMBOL VOS PARAMETER Input Offset Voltage CMRR IOS Common Mode Rejection Ratio Input Offset Current CONDITIONS VS = 15V, VCM = 0V RS 5k (Note 4) l (Note 4) l IB Input Bias Current (Note 4) l AV VSAT Voltage Gain Response Time Saturation Voltage Output Leakage Current Input Voltage Range IS Differential Input Voltage Supply Current Positive Supply Current Negative Supply Current (Note 5) VIN -10mV, ISINK = 25mA V+ 4.5V, V- = 0V, VIN -10mV, ISINK 3.2mA VIN 10mV, VOUT to V- = 35V VS = 15V V+ = 5V, V- = 0V l l l LT319A MIN TYP MAX 0.3 0.5 0.5 1 2 90 106 30 40 60 150 500 1000 20 40 80 0.75 1.5 0.3 0.4 LM319 MIN TYP MAX 8 2 8 10 0.2 13 0.2 13 1 l V+ = 5V, V- = 0V VS = 15V VS = 15V 4.3 8 3 80 250 8 10 3 5 12.5 5 1 40 80 0.75 0.3 4.3 8 3 200 300 1000 1200 1.5 0.4 10 3 5 12.5 5 SYMBOL mV mV mV dB nA nA nA nA V/mV ns V V A V V V mA mA mA 119a319afc 3 LT119A/LT319A LM119/LM319 ELECTRICAL CHARACTERISTICS Note 1: Stresses beyond those listed under Absolute Maximum Ratings may cause permanent damage to the device. Exposure to any Absolute Maximum Rating condition for extended periods may affect device reliability and lifetime. Note 2: For supply voltages less than 15V, the maximum input voltage is equal to the supply voltage. Note 3: Unless otherwise noted, supply voltage equals 15V and VCM = 0V, TA = 25C. The ground pin is grounded. Note that the maximum voltage allowed between the ground pin and V+ is 18V. Do not tie the ground pin to V- when the power supply voltage exceeds 9V. The offset voltage, offset current and bias current specifications apply for all supply voltages between 15V and 5V unless otherwise specified. Note 4: The offset voltages and currents given are the maximum values required to drive the output within 1V of either supply with a 1mA load, thus these parameters define an error band and take into account the worst case effects of voltage gain and input impedance. Note 5: Response time specified is for a 100mV input step with 5mV overdrive. Note 6: Inputs are protected with back-to-back 5.6V zener diodes. This limits maximum differential input voltage to 5V if current is unlimited. Larger differential input drive is allowed if input current is limited to 5mA with external resistance. TYPICAL PERFORMANCE CHARACTERISTICS Transfer Function 5 20 4 15 3 10 2 5.0 1 0 -1.0 -0.6 0.2 0.6 -0.2 DIFFERENTIAL INPUT VOLTAGE (mV) 300 200 100 0 -100 -10 0 1.0 -6 2 6 -2 DIFFERENTIAL INPUT VOLTAGE (V) 3 2 20mV 6 5 2 0 -100 50 100 150 200 250 300 350 TIME (ns) LT119/319 G4 2mV 4 3 0 -50 Response Time for Various Input Overdrives 5 1 0 5 25 45 65 85 105 125 TEMPERATURE (C) LT119/319 G3 6 1 0 0 -55 -35 -15 10 OUTPUT VOLTAGE (V) 5mV VS = 15V RL = 500 V ++ = 5V TA = 25C OUTPUT VOLTAGE (V) 4 OFFSET Response Time for Various Input Overdrives INPUT VOLTAGE (mV) OUTPUT VOLTAGE (V) INPUT VOLTAGE (mV) 2mV 100 LT119/319 G2 Response Time for Various Input Overdrives 5 BIAS 150 50 MAXIMUM DIFFERENTIAL INPUT VOLTAGE LT119/319 G1 6 VS = 15V 200 INPUT CURRENT (nA) V ++ = 5V 25 VS = 15V TA = 25C 7 6 Input Currents 250 5mV 20mV VS = 5V RL = 500 V + + = 5V TA = 25C 4 3 20mV 2 5mV 2mV 1 VS = 5V RL = 500 V + + = 5V TA = 25C 100 50 0 INPUT VOLTAGE (mV) 30 400 OUTPUT VOLTAGE LOW (V) OUTPUT VOLTAGE HIGH (V) V ++ = 36V VS = 15V RL = 1.4k TA = 25C 35 Input Characteristics 8 INPUT BIAS CURRENT (nA) 40 0 0 -50 -100 0 50 100 150 200 250 300 350 TIME (ns) LT119/319 G5 0 50 100 150 200 250 300 350 TIME (ns) LT119/319 G6 119a319afc 4 LT119A/LT319A LM119/LM319 TYPICAL PERFORMANCE CHARACTERISTICS Output Saturation Voltage Supply Current 25 TJ = 25C SUPPLY CURRENT (mA) OUTPUT CURRENT (mA) 10 5 0.6 0.8 0.4 OUTPUT VOLTAGE (V) POSITIVE SUPPLY 6 4 NEGATIVE SUPPLY 2 VS = 15V INPUT OVERDRIVE = 5mV 0.2 8 0 1.0 0 15 5 10 SUPPLY VOLTAGE (V) Common Mode Limits 0.8 60 0.6 40 0.4 POWER DISSIPATION 20 0 0.2 0 15 5 10 OUTPUT VOLTAGE (V) LT119/319 G9 Supply Current V+ 12 V + = 5V, V - = 0V -0.8 VS = 15V -1.2 -1.6 REFERRED TO SUPPLY VOLTAGES -2.0 1.2 VS = 15V, V + = 5V, V - = 0V 10 SUPPLY CURRENT (mA) -0.4 COMMON-MODE LIMITS (V) 80 0 20 1.0 SHORT-CIRCUIT CURRENT AFTER 3 MINUTES LT119/319 G8 LT119/319 G7 0.8 100 POWER DISSIPATION (W) 15 SHORT-CIRCUIT CURRENT (mA) 10 0 1.2 TJ = 25C TJ = 25C 20 0 Output Limiting Characteristics 120 12 6 POSITIVE SUPPLY = 5V, V - = 0V 4 2 0.4 V- - 55 - 35 -15 POSITIVE SUPPLY = 15V 8 NEGATIVE SUPPLY = -15V 0 - 55 - 35 -15 5 25 45 65 85 105 125 TEMPERATURE (C) 5 25 45 65 85 105 125 TEMPERATURE (C) LT119/319 G11 LT119/319 G10 TYPICAL APPLICATIONS Relay Driver High Noise Immunity 60Hz Sync Circuit 10 INPUTS 9 5V 28V 5V 68k 11 - 1/2 LT319A + 6 7 8 35V 60Hz INPUT 10VP-P (TYP) 1N4148 20k 10 0.15F 9 3.3k - 11 1/2 LT319A + 7 OUTPUT 8 6 10k LT119/319 TA3 10k LT119/319 TA4 119a319afc 5 LT119A/LT319A LM119/LM319 TYPICAL APPLICATIONS Voltage Controlled Crystal Oscillator With 100ppm Trim Range 100k INPUT 0V TO 5V AT CUT 18pF, 100kHz 10k 5V MV1405* 5 1000pF 4 - 11 12 1/2 LT319A + 5V 1k 3 9 39k 10 20k 1k + 7 1/2 LT319A 1/2 - 3k 20k OUTPUT 8 6 5V 2k LT119/319 TA5 Voltage Controlled High Speed One Shot 5V 100pF 10 2k 5V INPUT PULSE 9 11 - 680 7 1/2 LT319A + 8 10k 100pF 1k 2k 0V TO 1V INPUT 4 120pF 5 5V OUTPUT 0s TO 1s (20ns MINIMUM) 680 + 1/2 LT319A - 6 LM385-1.2 7408 12 3 300pF LT119/319 TA6 5V 119a319afc 6 LT119A/LT319A LM119/LM319 TYPICAL APPLICATIONS 10-Bit Serial Output A/D Converter 5V INPUT 0V TO 3.5V 10k* 5V 20k* LT1004-1.2 4.7k 10k PN4250 5 PN4250 4 - 11 12 1/2 LT119A 5V 1N4148 3 + 74C04 9 + 1000F 1/2 LT119A 10 6 -5V 1k - 2N3904 1N4148 1k 3.9k *1% FILM -5V POLYSTYRENE, MOUNT CAPACITORS CLOSE TOGETHER DATA OUT 8 1N4148 39k 82k 0.1F 7 15k 1k CONVERT COMMAND INPUT (TTL) CONVERSION TIME = 10ms * = 1% CAPACITORS ARE POLYSTYRENE MOUNT IN CLOSE PROXIMITY 5V LT119/319 TA7 5 Microsecond Sample-and-Hold with Zero Hold Step 15V + 10F 1N4148 4.7k 100 240 3k 2N2907 15V 2N2907 12k 0.003F 10k 12 2N2907 3k 2N4931 15V 11 2N2222 20k - 5 3.3k 1/2 LT119A 3 + -15V 4 9k 1k 10pF 1N4148 -15V 5V 0V SAMPLE HOLD VOUT - 7 1/2 LT119A 1k 9 6 INPUT *TRIM FOR ZERO VOLTS OUT WITH ZERO VOLTS IN POLYSTYRENE CAPACITOR 2pF TO 8pF* 10 9k 8 + 15V 3k Q VS CLK D 74C74 CLR PRESET LT119/319 TA8 119a319afc 7 LT119A/LT319A LM119/LM319 SCHEMATIC DIAGRAM R1 3.5k R2 4k V+ R3 4k R6 3k R7 3k Q9 Q4 Q8 Q3 - + R4 3k 5.6V Q1 C1 18pF Q6 Q2 5.6V INPUTS Q7 R11 13k R5 3k Q15 R8 2k Q5 R9 18k R23 4k R22 60 R20 3.6k Q21 TO OTHER SIDE LT119A R24 250 R18 1.9k R19 250 Q20 Q13 Q10 Q22 R25 600 R12 13k R10 170 OUTPUT Q14 R13 600 Q11 R15 300 Q16 Q12 R16 600 R14 2k Q19 Q17 R21 Q18 900 R17 3 V- GND 119a319afc 8 LT119A/LT319A LM119/LM319 PACKAGE DESCRIPTION Please refer to http://www.linear.com/designtools/packaging/ for the most recent package drawings. N Package 14-Lead PDIP (Narrow .300 Inch) (Reference LTC DWG # 05-08-1510 Rev I) .300 - .325 (7.620 - 8.255) .008 - .015 (0.203 - 0.381) ( +.035 .325 -.015 +0.889 8.255 -0.381 .045 - .065 (1.143 - 1.651) .130 .005 (3.302 0.127) .020 (0.508) MIN .065 (1.651) TYP .120 (3.048) MIN ) NOTE: 1. DIMENSIONS ARE .770* (19.558) MAX .005 (0.127) .100 MIN (2.54) BSC 14 13 12 11 10 9 1 2 3 4 5 6 8 .255 .015* (6.477 0.381) .018 .003 (0.457 0.076) 7 N14 REV I 0711 INCHES MILLIMETERS *THESE DIMENSIONS DO NOT INCLUDE MOLD FLASH OR PROTRUSIONS. MOLD FLASH OR PROTRUSIONS SHALL NOT EXCEED .010 INCH (0.254mm) J Package 14-Lead CERDIP (Narrow .300 Inch, Hermetic) (Reference LTC DWG # 05-08-1110) .200 (5.080) MAX .300 BSC (7.62 BSC) .015 - .060 (0.381 - 1.524) .008 - .018 (0.203 - 0.457) .005 (0.127) MIN .785 (19.939) MAX 14 13 12 11 10 9 8 .220 - .310 (5.588 - 7.874) .025 (0.635) RAD TYP 0 - 15 1 .045 - .065 (1.143 - 1.651) NOTE: LEAD DIMENSIONS APPLY TO SOLDER DIP/PLATE OR TIN PLATE LEADS .014 - .026 (0.360 - 0.660) .100 (2.54) BSC 2 3 4 5 6 7 .125 (3.175) MIN J14 0801 OBSOLETE PACKAGE 119a319afc 9 LT119A/LT319A LM119/LM319 PACKAGE DESCRIPTION Please refer to http://www.linear.com/designtools/packaging/ for the most recent package drawings. H Package 10-Lead TO-5 Metal Can (Reference LTC DWG # 05-08-1322) .040 (1.016) MAX .335 - .370 (8.509 - 9.398) DIA .305 - .335 (7.747 - 8.509) .050 (1.270) MAX SEATING PLANE .165 - .185 (4.191 - 4.699) GAUGE PLANE .010 - .045* (0.254 - 1.143) REFERENCE PLANE .500 - .750 (12.700 - 19.050) .016 - .021** (0.406 - 0.533) .027 - .045 (0.686 - 1.143) 36 .028 - .034 (0.711 - 0.864) PIN 1 .230 ( 5.842) TYP .110 - .160 (2.794 - 4.064) INSULATING STANDOFF *LEAD DIAMETER IS UNCONTROLLED BETWEEN THE REFERENCE PLANE AND THE SEATING PLANE .016 - .024 **FOR SOLDER DIP LEAD FINISH, LEAD DIAMETER IS (0.406 - 0.610) H10(TO-5) 0204 OBSOLETE PACKAGE 119a319afc 10 LT119A/LT319A LM119/LM319 REVISION HISTORY (Revision history begins at Rev C) REV DATE DESCRIPTION C 3/12 VSAT Conditions corrected from VIN 6mA to VIN 6mV PAGE NUMBER 3 119a319afc Information furnished by Linear Technology Corporation is believed to be accurate and reliable. However, no responsibility is assumed for its use. Linear Technology Corporation makes no representation that the interconnection of its circuits as described herein will not infringe on existing patent rights. 11 LT119A/LT319A LM119/LM319 TYPICAL APPLICATION 5kHz to 2MHz VF Converter 5V 50pF POLYSTYRENE 3.3k 5V 5V 330 TTL OUT 5kHz TO 2MHz 470 10k 0V TO 10V 2k 20k 5 - 0.01F 1/2 LT119A 4 + 3 220 12 470 22pF 5V 10k 10k 1M 2k 11 LT1004-1.2 -5V ALL DIODES 1N4148 SET SCALE FACTOR 2N2369 7 - 10 1/2 LT119A 8 + 6 0.1F 9 3k LT119/319 TA9 -5V 119a319afc 12 Linear Technology Corporation LT 0412 REV C * PRINTED IN USA 1630 McCarthy Blvd., Milpitas, CA 95035-7417 (408) 432-1900 FAX: (408) 434-0507 www.linear.com LINEAR TECHNOLOGY CORPORATION 1994