https://www.phoenixcontact.com/us/products/2800170 Combination type 1/2 protective device-FLT-PLUS CTRL-3.0/I-2800170 Please be informed that the data shown in this PDF Document is generated from our Online Catalog. Please find the complete data in the user's documentation. Our General Terms of Use for Downloads are valid (http://phoenixcontact.com/download) Type 1 / Class I (lightning current arrester) with arc chopping spark gap and ignition electronics with control lamp, quenching plates for high mains follow-through current quenching capacity, 1-channel. Protection level: 3 kV. Housing width: 35 mm (2 Div.) The figure shows version FLT-PLUS CTRL-0,9 Your advantages High discharge capacity Good follow current quenching capacity with higher rated voltage 1-channel Direct parallel connection with type 2 arresters supported Triggered Key Commercial Data Packing unit 1 pc Weight per Piece (excluding packing) 580.000 g Custom tariff number 85363010 Country of origin Germany Technical data Dimensions Height 150 mm Width 35.5 mm Depth 80.5 mm Horizontal pitch 2 Div. Ambient conditions Degree of protection IP20 Ambient temperature (operation) -40 C ... 85 C 12/14/2019Page1/7 https://www.phoenixcontact.com/us/products/2800170 Combination type 1/2 protective device-FLT-PLUS CTRL-3.0/I-2800170 Technical data Ambient conditions Permissible humidity (operation) 95 % General IEC power supply system TT TN-C TN-S IT Housing material PA-GF Flammability rating according to UL 94 V0 Color black Standards for cearances and creepage distances EN 60664-1 EN61643-11 Mounting type DIN rail: 35 mm Type DIN rail module, one-piece Number of positions 1 Surge protection fault message optical Direction of action 1L-N/PE Protective circuit IEC test classification I T1 EN type T1 Maximum continuous operating voltage UC 440 V AC Maximum continuous operating voltage UC (L-N) 440 V AC Maximum continuous operating voltage UC (L-PEN) 440 V AC UT (TOV-proof) 580 V AC (5 sec.) UT (TOV-safe) 1640 V AC (200 ms) Nominal frequency fN 50 Hz 60 Hz Residual current IPE 3 mA Standby power consumption PC 1.32 VA Max. discharge current Imax (8/20) s 50 kA Impulse discharge current (10/350)s, charge 25 As Impulse discharge current (10/350)s, specific energy 625 kJ/ Impulse discharge current (10/350)s, peak value limp 50 kA Nominal discharge current In (8/20) s 50 kA Nominal discharge current In (8/20) s (L-N) 50 kA Nominal discharge current In (8/20) s (L-PEN) 50 kA 12/14/2019Page2/7 https://www.phoenixcontact.com/us/products/2800170 Combination type 1/2 protective device-FLT-PLUS CTRL-3.0/I-2800170 Technical data Protective circuit Front of wave sparkover voltage at 6 kV (1.2/50) s 3 kV Voltage protection level Up 3 kV Voltage protection level Up (L-N) 3 kV Voltage protection level Up (L-PEN) 3 kV Response time tA 100 ns Response time tA (L-N) 100 ns Response time tA (L-PE) 100 ns Max. backup fuse with branch wiring 500 A (NH-gL) Short-circuit withstand capability IP with max. backup fuse (r.m.s.) 25 kA (440 V AC) 50 kA (350 V AC) Follow current interrupt rating Ifi 25 kA (440 V AC) 50 kA (350 V AC) Connection, protective circuit Connection method Screw connection Connection method IN Biconnect screw terminal block Connection method OUT Biconnect screw terminal block Connection technology Biconnect terminal block Screw thread M6 Tightening torque 8 Nm Stripping length 19 mm Conductor cross section flexible min. 16 mm Conductor cross section flexible max. 35 mm Conductor cross section solid min. 10 mm Conductor cross section solid max. 50 mm Conductor cross section AWG min. 6 Conductor cross section AWG max. 1 Standards and Regulations Standards/regulations IEC 61643-1 2005 DINEN61643-11 2002 DINEN61643-11/A11 2007 Environmental Product Compliance China RoHS Environmentally friendly use period: unlimited = EFUP-e No hazardous substances above threshold values Drawings 12/14/2019Page3/7 https://www.phoenixcontact.com/us/products/2800170 Combination type 1/2 protective device-FLT-PLUS CTRL-3.0/I-2800170 Circuit diagram Classifications eCl@ss eCl@ss 4.0 27140201 eCl@ss 4.1 27140201 eCl@ss 5.0 27140201 eCl@ss 5.1 27140201 eCl@ss 6.0 27140201 eCl@ss 7.0 27140201 eCl@ss 8.0 27130802 eCl@ss 9.0 27130802 ETIM ETIM 2.0 EC000381 ETIM 3.0 EC000381 ETIM 4.0 EC000381 ETIM 5.0 EC000381 UNSPSC UNSPSC 6.01 30212010 UNSPSC 7.0901 39121610 UNSPSC 11 39121610 UNSPSC 12.01 39121610 UNSPSC 13.2 39121620 12/14/2019Page4/7 https://www.phoenixcontact.com/us/products/2800170 Combination type 1/2 protective device-FLT-PLUS CTRL-3.0/I-2800170 Accessories Accessories Bridge Wiring bridge-MPB 18/1-57-2809238 Wiring bridge for modules with connecting pitch 17.5 mm, 1-phase, 57-pos. Wiring bridge-MPB 18/1-12-2748593 Wiring bridge for modules with connecting pitch 17.5 mm, 1-phase, 12-pos. Wiring bridge-MPB 18/1- 9-2748580 Wiring bridge for modules with connecting pitch 17.5 mm, 1-phase, 9-pos. Wiring bridge-MPB 18/1- 8-2748577 Wiring bridge for modules with connecting pitch 17.5 mm, 1-phase, 8-pos. Wiring bridge-MPB 18/1- 6-2748564 Wiring bridge for modules with connecting pitch 17.5 mm, 1-phase, 6-pos. 12/14/2019Page5/7 https://www.phoenixcontact.com/us/products/2800170 Combination type 1/2 protective device-FLT-PLUS CTRL-3.0/I-2800170 Accessories Wiring bridge-MPB 18/1- 4-2809225 Wiring bridge for modules with connecting pitch 17.5 mm, 1-phase, 4-pos. Wiring bridge-MPB 18/1- 3-2809212 Wiring bridge for modules with connecting pitch 17.5 mm, 1-phase, 3-pos. Wiring bridge-MPB 18/1- 2-2809209 Wiring bridge for modules with connecting pitch 17.5 mm, 1-phase, 2-pos. Device marking Zack marker strip-ZBN 18:UNBEDRUCKT-2809128 Zack marker strip, Strip, white, unlabeled, can be labeled with: CMS-P1-PLOTTER, PLOTMARK, mounting type: snap into tall marker groove, for terminal block width: 18 mm, lettering field size: 18 x 5 mm, Number of individual labels: 5 End block 12/14/2019Page6/7 https://www.phoenixcontact.com/us/products/2800170 Combination type 1/2 protective device-FLT-PLUS CTRL-3.0/I-2800170 Accessories End clamp-CLIPFIX 35-3022218 Quick mounting end clamp for NS 35/7,5 DIN rail or NS 35/15 DIN rail, with marking option, width: 9.5 mm, color: gray Labeled device marker Marker for terminal blocks-ZBN 18,LGS:ERDE-2749589 Marker for terminal blocks, Strip, white, labeled, Horizontal: Grounding symbol, mounting type: snap into tall marker groove, for terminal block width: 18 mm, lettering field size: 18 x 5 mm, Number of individual labels: 5 Marker for terminal blocks-ZBN 18,LGS:L1-N,ERDE-2749576 Marker for terminal blocks, Strip, white, labeled, Horizontal: L1, L2, L3, N, GND, mounting type: snap into tall marker groove, for terminal block width: 18 mm, lettering field size: 18 x 5 mm, Number of individual labels: 5 Marker pen Marker pen-B-STIFT-1051993 Marker pen, for manual labeling of unprinted Zack strips, smear-proof and waterproof, line thickness 0.5 mm Phoenix Contact 2019 (c) - all rights reserved http://www.phoenixcontact.com 12/14/2019Page7/7