https://www.phoenixcontact.com/us/products/2800170
12/14/2019Page1/7
Combination type 1/2 protective device-FLT-PLUS CTRL-3.0/I-2800170
Please be informed that the data shown in this PDF Document is generated from our Online Catalog. Please find the complete data in the user's
documentation. Our General Terms of Use for Downloads are valid
(http://phoenixcontact.com/download)
Type 1 / Class I (lightning current arrester) with arc chopping spark gap and ignition electronics with control lamp,
quenching plates for high mains follow-through current quenching capacity, 1-channel. Protection level: 3 kV.
Housing width: 35 mm (2 Div.)
The figure shows version FLT-PLUS
CTRL-0,9
Your advantages
High discharge capacity
Good follow current quenching capacity with higher rated voltage
1-channel
Direct parallel connection with type 2 arresters supported
Triggered
Key Commercial Data
Packing unit 1 pc
Weight per Piece (excluding packing) 580.000 g
Custom tariff number 85363010
Country of origin Germany
Technical data
Dimensions
Height 150 mm
Width 35.5 mm
Depth 80.5 mm
Horizontal pitch 2 Div.
Ambient conditions
Degree of protection IP20
Ambient temperature (operation) -40 °C ... 85 °C
https://www.phoenixcontact.com/us/products/2800170
12/14/2019Page2/7
Combination type 1/2 protective device-FLT-PLUS CTRL-3.0/I-2800170
Technical data
Ambient conditions
Permissible humidity (operation) ≤ 95 %
General
IEC power supply system TT
TN-C
TN-S
IT
Housing material PA-GF
Flammability rating according to UL 94 V0
Color black
Standards for cearances and creepage distances EN 60664-1
EN61643-11
Mounting type DIN rail: 35 mm
Type DIN rail module, one-piece
Number of positions 1
Surge protection fault message optical
Direction of action 1L-N/PE
Protective circuit
IEC test classification I
T1
EN type T1
Maximum continuous operating voltage UC440 V AC
Maximum continuous operating voltage UC (L-N) 440 V AC
Maximum continuous operating voltage UC (L-PEN) 440 V AC
UT (TOV-proof) 580 V AC (5 sec.)
UT (TOV-safe) 1640 V AC (200 ms)
Nominal frequency fN50 Hz
60 Hz
Residual current IPE ≤ 3 mA
Standby power consumption PC≤ 1.32 VA
Max. discharge current Imax (8/20) µs 50 kA
Impulse discharge current (10/350)µs, charge 25 As
Impulse discharge current (10/350)µs, specific energy 625 kJ/Ω
Impulse discharge current (10/350)µs, peak value limp 50 kA
Nominal discharge current In (8/20) µs 50 kA
Nominal discharge current In (8/20) µs (L-N) 50 kA
Nominal discharge current In (8/20) µs (L-PEN) 50 kA
https://www.phoenixcontact.com/us/products/2800170
12/14/2019Page3/7
Combination type 1/2 protective device-FLT-PLUS CTRL-3.0/I-2800170
Technical data
Protective circuit
Front of wave sparkover voltage at 6 kV (1.2/50) µs ≤ 3 kV
Voltage protection level Up≤ 3 kV
Voltage protection level Up (L-N) ≤ 3 kV
Voltage protection level Up (L-PEN) ≤ 3 kV
Response time tA≤ 100 ns
Response time tA (L-N) ≤ 100 ns
Response time tA (L-PE) ≤ 100 ns
Max. backup fuse with branch wiring 500 A (NH-gL)
Short-circuit withstand capability IP with max. backup fuse (r.m.s.) 25 kA (440 V AC)
50 kA (350 V AC)
Follow current interrupt rating Ifi 25 kA (440 V AC)
50 kA (350 V AC)
Connection, protective circuit
Connection method Screw connection
Connection method IN Biconnect screw terminal block
Connection method OUT Biconnect screw terminal block
Connection technology Biconnect terminal block
Screw thread M6
Tightening torque 8 Nm
Stripping length 19 mm
Conductor cross section flexible min. 16 mm²
Conductor cross section flexible max. 35 mm²
Conductor cross section solid min. 10 mm²
Conductor cross section solid max. 50 mm²
Conductor cross section AWG min. 6
Conductor cross section AWG max. 1
Standards and Regulations
Standards/regulations IEC 61643-1 2005
DINEN61643-11 2002
DINEN61643-11/A11 2007
Environmental Product Compliance
China RoHS Environmentally friendly use period: unlimited = EFUP-e
No hazardous substances above threshold values
Drawings
https://www.phoenixcontact.com/us/products/2800170
12/14/2019Page4/7
Combination type 1/2 protective device-FLT-PLUS CTRL-3.0/I-2800170
Circuit diagram
Classifications
eCl@ss
eCl@ss 4.0 27140201
eCl@ss 4.1 27140201
eCl@ss 5.0 27140201
eCl@ss 5.1 27140201
eCl@ss 6.0 27140201
eCl@ss 7.0 27140201
eCl@ss 8.0 27130802
eCl@ss 9.0 27130802
ETIM
ETIM 2.0 EC000381
ETIM 3.0 EC000381
ETIM 4.0 EC000381
ETIM 5.0 EC000381
UNSPSC
UNSPSC 6.01 30212010
UNSPSC 7.0901 39121610
UNSPSC 11 39121610
UNSPSC 12.01 39121610
UNSPSC 13.2 39121620
https://www.phoenixcontact.com/us/products/2800170
12/14/2019Page5/7
Combination type 1/2 protective device-FLT-PLUS CTRL-3.0/I-2800170
Accessories
Accessories
Bridge
Wiring bridge-MPB 18/1-57-2809238
Wiring bridge for modules with connecting pitch 17.5 mm, 1-phase, 57-pos.
Wiring bridge-MPB 18/1-12-2748593
Wiring bridge for modules with connecting pitch 17.5 mm, 1-phase, 12-pos.
Wiring bridge-MPB 18/1- 9-2748580
Wiring bridge for modules with connecting pitch 17.5 mm, 1-phase, 9-pos.
Wiring bridge-MPB 18/1- 8-2748577
Wiring bridge for modules with connecting pitch 17.5 mm, 1-phase, 8-pos.
Wiring bridge-MPB 18/1- 6-2748564
Wiring bridge for modules with connecting pitch 17.5 mm, 1-phase, 6-pos.
https://www.phoenixcontact.com/us/products/2800170
12/14/2019Page6/7
Combination type 1/2 protective device-FLT-PLUS CTRL-3.0/I-2800170
Accessories
Wiring bridge-MPB 18/1- 4-2809225
Wiring bridge for modules with connecting pitch 17.5 mm, 1-phase, 4-pos.
Wiring bridge-MPB 18/1- 3-2809212
Wiring bridge for modules with connecting pitch 17.5 mm, 1-phase, 3-pos.
Wiring bridge-MPB 18/1- 2-2809209
Wiring bridge for modules with connecting pitch 17.5 mm, 1-phase, 2-pos.
Device marking
Zack marker strip-ZBN 18:UNBEDRUCKT-2809128
Zack marker strip, Strip, white, unlabeled, can be labeled with: CMS-P1-PLOTTER, PLOTMARK, mounting type: snap
into tall marker groove, for terminal block width: 18 mm, lettering field size: 18 x 5 mm, Number of individual labels: 5
End block
https://www.phoenixcontact.com/us/products/2800170
12/14/2019Page7/7
Combination type 1/2 protective device-FLT-PLUS CTRL-3.0/I-2800170
Accessories
End clamp-CLIPFIX 35-3022218
Quick mounting end clamp for NS 35/7,5 DIN rail or NS 35/15 DIN rail, with marking option, width: 9.5 mm, color: gray
Labeled device marker
Marker for terminal blocks-ZBN 18,LGS:ERDE-2749589
Marker for terminal blocks, Strip, white, labeled, Horizontal: Grounding symbol, mounting type: snap into tall marker
groove, for terminal block width: 18 mm, lettering field size: 18 x 5 mm, Number of individual labels: 5
Marker for terminal blocks-ZBN 18,LGS:L1-N,ERDE-2749576
Marker for terminal blocks, Strip, white, labeled, Horizontal: L1, L2, L3, N, GND, mounting type: snap into tall marker
groove, for terminal block width: 18 mm, lettering field size: 18 x 5 mm, Number of individual labels: 5
Marker pen
Marker pen-B-STIFT-1051993
Marker pen, for manual labeling of unprinted Zack strips, smear-proof and waterproof, line thickness 0.5 mm
Phoenix Contact 2019 © - all rights reserved
http://www.phoenixcontact.com