©2017 Amprobe® For detailed specications and ordering go to amprobe.com 6003703 CAmprobe® | info@amprobe.com | Fluke Corporation, Everett, WA 98203 | Tel: 877-AMPROBE (267-7623)
Hot Stick
attachment adapter
(TIC 410A)
4-way
navigation
keys
Signal sensitivity
adjustment (-/+)
Enter key for
selecting functions
Tip Sensor
Large bright TFT
LCD full color
display
Smart Sensor
(Back)
AT-7000-R Receiver
Non-Contact
Voltage (NCV)
Get accurate results in minutes with new features and technologies
that simplify wire tracing and breaker identication. The Receiver’s
patented Smart Sensor,
with its innovative new antenna design and
advanced signal processor, clearly displays the location and orientation
of energized wires in walls, oors and ceilings on the large color TFT LCD
screen. The powerful Transmitter utilizes two optimal frequencies for
both energized and de-energized wire and breaker tracing, delivering
consistently accurate results for novice users and experts alike. The new
Scan and Locate feature clearly identies the one correct breaker or fuse,
eliminating the confusion from multiple false positive readings common
in older technology tracing tools.
AT-7000 Advanced
Wire Tracer
Wire Tracing Reinvented
Traces wires in walls, ceilings,
floors and corners
Locates breakers and fuses
Pinpoints shorts and opens
High resolution 3.5 TFT LCD
color display
Three power modes
”High” power mode for normal
circuits
”Low” power mode for precision
tracing in difcult areas
”Clamp” power mode provides a
boosted signal using signal clamp
Two automatically selected
frequency modes for optimal
tracing on energized and
de-energized circuits
Clamp-on attachment (SC-7000)
for inducing signal into
wires without access to bare
conductors
Embedded help screens make
set-up easy and error free
AT-7000-T
Transmitter
AT-7000-R
Receiver
AT-7000 Features
©2017 Amprobe® For detailed specications and ordering go to amprobe.com 6003703 CAmprobe® | info@amprobe.com | Fluke Corporation, Everett, WA 98203 | Tel: 877-AMPROBE (267-7623)
Features AT-7020 Kit AT-7030 Kit
Traces Energized and De-Energized Wires
Locates Energized and De-Energized Breakers
Pinpoints Shorts and Opens
Three Power Modes
”High” power mode for normal circuits
”Low” power mode for precision tracing in difcult areas
”Clamp” power mode provides a boosted induction signal via the signal clamp
Two Frequency Modes for Optimal Tracing
6 kHz for energized circuits
33 kHz for de-energized circuits
Signal Clamp (SC-7000)
Clamp-on attachment for inducing signal into wires without access to bare conductors (optional)
Smart Sensor
Quickly and easily determine the precise
direction and location of energized wires in
walls, oors and ceilings with the patented
Smart Sensor™. Combined with a fast signal
processor that measures small changes in the
detected signal multiple times per second, this
new technology provides unmatched precision
and ease of use for tracing energized wires.
Signal Clamp
When there’s no access to bare conductors, use
the SC-7000 signal clamp to induce a signal into
either energized or de-energized circuits for
wire tracing and load locating. The AT-7000-T
transmitter’s “clamp” mode provides a boosted 6
kHz signal through the clamp to further improve
accuracy and performance.
AT-7000-T Transmitter
Featuring three power modes “high”, “low”,
and “clamp” and two output frequencies (6kHz
and 33 kHz), the AT-7000-T incorporates the
best technologies available for optimal wire
tracing and breaker identication on both
energized and de-energized circuits. The AT-
7000-T automatically sets the frequency based
on detected voltage, and prompts the user to
set the power level based on their application.
The color TFT LCD screen displays the detected
voltage, frequency output and power mode.
Tip Sensor
The shape of the tip sensor allows tracing in
hard to reach areas, corners & tight spaces,
as well as precise circuit breaker and fuse
identication. By utilizing two different types of
antennas (inductive coil and capacitive), the tip
sensor enables optimal tracing results of both
energized and de-energized circuits, which are
automatically selected by operating mode.
AT-7000 Features and Functions
Tip Sensor
SC-7000
Signal Clamp
AT-7000-R
Receiver
Smart Sensor
AT-7000-R
Receiver
AT-7000-T
Transmitter
Power Mode
Buttons (High,
Low, Clamp)
The AT-7000 Advanced Wire Tracer is available in two feature-packed kits
©2017 Amprobe® For detailed specications and ordering go to amprobe.com 6003703 CAmprobe® | info@amprobe.com | Fluke Corporation, Everett, WA 98203 | Tel: 877-AMPROBE (267-7623)
The solid green arrow and audible alert
indicates the target breaker has been found.
Quick and Easy Wire Tracing with the Smart Sensor
Tracing Wires in Walls, Ceilings and Floors
Tracing wires can be a challenge. The Amprobe AT-7000 makes tracing energized wires easier and more accurate than
ever before. The Smart Sensor’s™ patented sensor array and
advanced signal processor provides instant feedback of
wire location and direction on the large TFT LCD color display. Easily determine the direction and orientation of wires in
walls, oors and ceilings up to 2 in/5 cm accuracy.
Clear and Accurate Breaker Identication
Identifying breakers and fuses
Combined with our powerful transmitter utilizing optimal frequencies for energized and de-energized tracing, the new
Scan and Locate feature identies the one correct breaker or fuse with the highest recorded signal. This eliminates the
confusion from multiple false positive readings common in older technology tracing tools.
AT-7000-R
Receiver
AT-7000 Features and Functions
AT-7000-T
Transmitter
Large dynamic TFT LCD color display
guides you in the direction and
orientation of the energized wire.
Display shows when the Smart
Sensor™ is centered over the location
of the energized wire and indicates its
precise direction and orientation.
AT-7000-T
Transmitter
AT-7000-R
Receiver
Energized
wire
Grounded
Test Lead
©2017 Amprobe® For detailed specications and ordering go to amprobe.com 6003703 CAmprobe® | info@amprobe.com | Fluke Corporation, Everett, WA 98203 | Tel: 877-AMPROBE (267-7623)
Hot Stick attachment
The optional TIC 410A Hot Stick accessory enables easier
tracing of wires in high ceilings, walls and along oors.
TIC 410A
Hot Stick Attachment
AT-7000 Features and Functions
Trace Wires Inside Conduit
Trace energized and de-energized wires enclosed in metal
conduit by removing the junction box cover and using the
AT-7000-R Receiver’s Tip Sensor to identify the specic wire
carrying the transmitted signal generated by the AT-7000-T
Transmitter. Wires in non-metal conduit can be traced
directly without opening the junction box and using the
AT-7000-R Receiver’s Smart Sensor.
Trace energized wires without access
to exposed conductors
The SC-7000 signal clamp accessory can be used with the
AT-7000-T Transmitter to induce a signal into energized
and de-energized wires when there is no access to bare
conductors. Simply clamp around the desired wire to
induce the signal, then begin tracing.
Use the Tip Sensor to trace wires in
hard to reach areas
When used with the AT-7000-T Transmitter, the Tip Sensor
pinpoints the location of energized and de-energized wires
in tight, hard to reach spaces. It easily and accurately traces
the targeted energized and de-energized wires in junction
boxes, corners, walls, oors and ceilings to a depth of up to
20 feet.
Non-contact voltage (NCV) detection
The NCV feature extends functionality of the AT-7000-R
Receiver by detecting energized wires from 90 to 600
V and 40 to 400 Hz without the use of the AT-7000-T
Transmitter. Its adjustable sensitivity ts a range of
applications, from detecting presence of voltage (higher
sensitivity) to precisely pinpointing a hot wire in a bundle
(lower sensitivity).
Trace energized or de-energized wires by removing the junction
box cover.
Use the Tip Sensor to trace wires in hard to reach areas.
Induce signal with the signal clamp when there is no bare conductor.
Non-contact voltage (NCV) detection.
Trace wires in hard to reach places with the TIC 410A.
©2017 Amprobe® For detailed specications and ordering go to amprobe.com 6003703 CAmprobe® | info@amprobe.com | Fluke Corporation, Everett, WA 98203 | Tel: 877-AMPROBE (267-7623)
AT-7000 Advanced Wire Tracer
Specications AT-7000-R Receiver AT-7000-T Transmitter SC-7000 Signal Clamp
TFT LCD Color Display size 3.5 in (8.89 cm) 1.77 in (4.5 cm)
TFT LCD Color Display Dimensions 2.76 x 2.07 in (7.01 x 5.26 cm) 1.1 x 1.38 in (2.79 x 3.51 cm)
TFT LCD Color Display Resolution 320px x 240px 128px x 160px
TFT LCD Color Display type TFT LCD RGB x TFT
TFT LCD Color Display ••–
Backlight ••–
mDDR 64 MB 64 MB
FLASH memory 128 MB 128 MB
Audio 95 dB
Operating Temperature range 0 to 120˚F (-17.77 ˚C to 49˚C) 0 to 120˚F (-17.77˚C to 49˚C) 0 to 120˚F (-17.77˚C to 49˚C)
Storage Temperature -40 to 150˚F (-40 to 65.5˚C) -40 to 150˚F (-40 to 65.5˚C) -40 to 150˚F (-40 to 65.5˚C)
Operating Humidity 95% R.H max 95% R.H max 95% R.H max
Operating altitude 2000 m 2000 m 2000 m
Measurement Category CAT IV 600 V CAT IV 300 V CAT IV 600 V
Transient protection 8.00 kV (1.2/50 uS surge)
Pollution degree 222
Drop test 3.28 ft (1 m) 3.28 ft (1 m) 3.28 ft (1 m)
Power Supply 4xAA Alkaline battery
90-270 V AC/DC, 40-400 Hz
AT-7030: BR-7000-T: LI-ION, 7.2 V, 2.2 Ah
AT-7020: 6x AA Alkaline Battery
Power consumption 4xAA battery: 2W
AT-7030: BR-7000-T battery: 2W
AT-7020: 6xAA battery:2W
AC line voltage (Charging state): 10W
AC line voltage: 3W
Charging voltage (BR-7000-T) 85-270 V
Charging duration (BR-7000-T) 16 h
Power up time 30 s 20 s
Non-Rechargeable Battery lifetime 9 h 9 h
Rechargeable Battery lifetime
(BR-7000-T) 10 h
Leakage current (non-rechargeable) 1.1 to 2.6 uA 6 to 14 uA
Leakage current (rechargeable) 1.2 to 4 uA
IP Rating IP52 IP40
Sampling rate
6.25 kHz Signal: 62.5 kSPS
32.768 kHz: 256 kSPS
NCV: 62.5 kSPS
62.5 kSPS
Signal Response Audible beep, bargraph display,
numeric display Numeric display
Response time
Smart mode: 750 ms
Tip Sensor Energized: 300 ms
Tip Sensor De-Energized: 750 ms
NCV: 500 ms, Battery monitoring: 5 s
Voltage measurement: 1.5 s
Battery monitoring: 5 s Instantaneous
Voltage Measurement 9-300 V, DC to 400 Hz
Non-Contact Voltage (NCV) 90-600 V AC
LED Indicator Green Flashing: Signal Detection
Red: Energized
OFF: De-Energized
Orange: Over voltage
Operating Frequency Energized: 6.25 kHz
De-Energized: 32.768 kHz
Voltage measurement: 40-400 Hz
Energized: 6.25 kHz
De-Energized: 32.768 kHz
Energized: 6.25 kHz
De-Energized: 32.768 kHz
Acoustic Indication 1 kHz Piezo Buzzer
Range Detection (Open air) –––
Smart mode Pinpointing: Around 1.97 in (5 cm) radius
Direction indication: Up to 5 ft (152.4 cm)
TIP Sensor: Energized Pinpointing: Around 1.97 in (5 cm)
Detection: Up to 22 ft (670.56 cm)
TIP Sensor: De-Energized Pinpointing: Around 1.97 in (5 cm) radius
Detection: Up to 14 ft (426.72 cm)
NCV Detection: Up to 4 ft (121.92 cm)
Current Output (Low) Energized 53 mA rms
Current Output (High) Energized 92 mA rms
Current output (Low)
with BR-7000-T Energized 53 mA rms
Current output (High)
with BR-7000-T Energized 120 mA rms
Voltage output (Low) De-Energized 60 Vp-p
Voltage output (High) De-Energized 120 Vp-p
Voltage output (Clamp) De-Energized 180 Vp-p
Jaw Opening 2 in (5.08 cm)
Fuse 3.15A, 600V MAX, SLOW 5X20MM
Dimensions 10.92 x 4.43 x 2.55 in
(27.75 x 11.25 x 6.483 cm)
8.5 x 4 x 2.2 in
(21.59 x 10.16 x 5.59 cm)
8.2 x 3.2 x 1.68 in
(20.83 x 8.13 x 4.27 cm)
Weight 1.20 lb (0.544 kg) 1.30 lbs (0.593 kg) 0.648 lb (0.294 kg)
For complete information about Amprobe test tools, visit amprobe.com
Amprobe®
info@amprobe.com
Fluke Corporation, Everett, WA 98203
Tel: 877-AMPROBE (267-7623)
© 2017 Amprobe | Specications subject to change without notice. Printed In U.S.A. 6003703 C
AT-7000 Wire Tracer Kits
AT-7020 Kit AT-7030 Kit Description
AT-7000-R
Receiver
Receiver unit with Smart Sensor, Tip Sensor and color TFT LCD display
AT-7000-T
Transmitter Transmitter with two transmission frequencies (6 kHz and 33 kHz) and
three power modes (High, Low, Clamp)
TL-7000
Test Leads Test Lead Set with alligator clips (Black & Red), 30 ft. grounding lead,
power cord, plug adaptors and light socket adapter
CC-7000
Carrying Case Custom Amprobe hard carrying case that securely holds transmitter,
receiver, signal clamp, test leads and accessories
SC-7000
Signal Clamp (optional)
Signal Clamp accessory for inducing a signal into wires without access to
bare conductors
HS-1
Hanger (optional)
Three-way magnetic hanger for AT-7000-T transmitter, allowing
for convenient hanging of unit, placement on belt or as a stand
Battery Charger 3
AA Batteries 10
Rechargeable
AA Batteries 10
Kit Specications
Kit Weight 8.95 lbs (4.06 kg) 10.30 lbs (4.67 kg)
Case Size 16 x 13 x 7 in
(40.6 x 33 x 17.8 cm)
16 x 13 x 7 in
(40.6 x 33 x 17.8 cm)
AT-7020
Advanced Wire
Tracer Kit
AT-7030
Advanced Wire
Tracer Kit
AT-7030