Commercial Chip - C0G 16Vdc to 10kVdc
A range of commercial MLC chip capacitors in Ultra stable EIA
Class I C0G, or NP0, dielectric. C0G chips are used in precision
circuitry requiring Class I stability and exhibit linear temperature
coefficient, low loss and stable electrical properties with time,
voltage and frequency.
Designed for surface mount application with nickel barrier
terminations making them suitable for solder wave and reflow
solder board attachment as well as vapor phase attachment for
part sizes 2225 or smaller. Silver-palladium terminations are also
available for hybrid use with conductive epoxy.
Capacitance and voltage selection for popular chip sizes
Size 0402 0504 0603 0805 1005 1206 1210 1515 1808 1812 1825
Min cap.
0R3 0R5 0R3 0R5 0R5 3R0 5R0 3R0 5R0 5R0 100 100 150 150
Tmax inches:
mm:
0.024
0.61
0.044
1.12
0.035
0.89
0.054
1.37
0.054
1.37
0.064
1.63
0.065
1.63
0.130
3.02
0.065
1.63
0.080*
2.03
0.065
1.63
0.100*
2.54
0.080
2.03
0.140*
3.56
16V
271 222 152 562 822 153 273 473 393 393 563 563 104 104
25V
221 182 122 472 682 123 273 393 333 333 563 563 104 104
50V
181 152 102 392 562 123 223 333 223 273 393 393 104 104
100V
181 152 102 392 562 103 183 333 153 223 273 393 683 823
200V
101 821 561 182 272 562 103 223 103 153 183 273 473 683
250V
560 561 331 152 222 392 822 223 682 103 153 223 393 563
300V
•••821 122 272 472 153 472 562 103 153 223 473
400V
•••821 122 182 472 103 472 472 103 123 223 333
500V
•••821 122 182 392 822 472 472 103 123 223 273
600V
•••681 102 152 332 682 392 472 822 103 183 183
800V†
•••681 102 152 332 682 392 472 822 103 183 183
1kV†
•••471 391 102 222 562 222 332 472 822 103 153
1.5kV†
•••••561 122 392 122 182 272 472 562 103
2kV†
•••••391 821 272 821 122 182 272 272 562
3kV†
•••••••122 391 471 821 122 122 222
4kV†
•••••••681 221 271 471 821 681 122
5kV†
••••••••••••391 821
6kV†
••••••••••••••
7kV†
••••••••••••••
8kV†
••••••••••••••
9kV†
••••••••••••••
10kV†
••••••••••••••
† Units rated above 800V may require conformal coating to preclude arcing over chip surface
Capacitance and voltage selection for popular chip sizes
2020 2221 2225 2520 3333 3530 4040 4540 5440 5550 6560 7565 Size
270 270 270 270 390 390 390 390 390 390 390 560 101
Min cap.
0.180
4.57
0.080
2.03
0.080
2.03
0.150*
3.81
0.180
4.57
0.250
6.35
0.250
6.35
0.300
7.62
0.300
7.62
0.300
7.62
0.300
7.62
0.300
7.62
0.300
7.62
:inches Tmax
:mm
683 104 124 124 104 184 184 334 334 394 394 684 824
16V
683 104 124 124 104 184 184 334 334 394 394 684 824
25V
683 104 124 124 104 154 184 274 334 394 394 684 824
50V
563 683 823 104 823 124 154 224 274 274 274 474 564
100V
563 473 563 823 683 104 124 184 224 274 274 474 564
200V
473 393 473 683 563 104 124 184 204 224 224 394 474
250V
393 223 273 563 473 823 104 154 184 224 224 394 474
300V
333 223 273 393 393 563 823 124 154 184 184 334 394
400V
273 223 273 333 393 473 683 104 124 154 184 274 334
500V
153 183 273 273 223 393 393 823 823 104 154 224 274
600V
153 183 273 273 183 333 333 563 683 823 124 184 224
800V†
103 103 153 223 123 273 273 563 563 683 104 154 184
1kV†
822 562 822 153 103 183 223 393 393 393 563 823 124
1.5kV†
472 272 392 822 562 153 153 273 333 333 473 683 104
2kV†
222 122 182 332 272 822 103 183 223 223 333 473 683
3kV†
122 681 102 182 152 332 562 123 123 123 183 273 393
4kV†
821 391 561 122 102 222 332 682 822 822 123 183 223
5kV†
•••••182 182 392 392 472 562 103 123
6kV†
••••••122 272 272 332 472 682 822
7kV†
••••••102 222 222 272 332 562 682
8kV†
••••••821 152 182 182 272 392 472
9kV†
••••••681 122 152 152 222 332 392
10kV†
* Denotes non standard chip thickness.
Order code needs to have an ’X’ inserted together with the dimension in inches e.g. X080 where dimension is 0.080”
Standard EIA case sizes and available C/V values are listed
below - special sizes, thicknesses and other voltage ratings are
available; please contact the sales office for information.
16 | Phone: +1.661.295.5920 | www.novacap.com
Commercial Chip - C0G 16Vdc to 10kVdc
Capacitance and voltage selection for popular chip sizes
2020 2221 2225 2520 3333 3530 4040 4540 5440 5550 6560 7565 Size
270 270 270 270 390 390 390 390 390 390 390 560 101
Min cap.
0.180
4.57
0.080
2.03
0.080
2.03
0.150*
3.81
0.180
4.57
0.250
6.35
0.250
6.35
0.300
7.62
0.300
7.62
0.300
7.62
0.300
7.62
0.300
7.62
0.300
7.62
:inches Tmax
:mm
683 104 124 124 104 184 184 334 334 394 394 684 824
16V
683 104 124 124 104 184 184 334 334 394 394 684 824
25V
683 104 124 124 104 154 184 274 334 394 394 684 824
50V
563 683 823 104 823 124 154 224 274 274 274 474 564
100V
563 473 563 823 683 104 124 184 224 274 274 474 564
200V
473 393 473 683 563 104 124 184 204 224 224 394 474
250V
393 223 273 563 473 823 104 154 184 224 224 394 474
300V
333 223 273 393 393 563 823 124 154 184 184 334 394
400V
273 223 273 333 393 473 683 104 124 154 184 274 334
500V
153 183 273 273 223 393 393 823 823 104 154 224 274
600V
153 183 273 273 183 333 333 563 683 823 124 184 224
800V†
103 103 153 223 123 273 273 563 563 683 104 154 184
1kV†
822 562 822 153 103 183 223 393 393 393 563 823 124
1.5kV†
472 272 392 822 562 153 153 273 333 333 473 683 104
2kV†
222 122 182 332 272 822 103 183 223 223 333 473 683
3kV†
122 681 102 182 152 332 562 123 123 123 183 273 393
4kV†
821 391 561 122 102 222 332 682 822 822 123 183 223
5kV†
•••••182 182 392 392 472 562 103 123
6kV†
••••••122 272 272 332 472 682 822
7kV†
••••••102 222 222 272 332 562 682
8kV†
••••••821 152 182 182 272 392 472
9kV†
••••••681 122 152 152 222 332 392
10kV†
* Denotes non standard chip thickness.
Order code needs to have an ’X’ inserted together with the dimension in inches e.g. X080 where dimension is 0.080”
l For dielectric characteristics see page 4.
l For dimensions see page 12.
l For termination options see pages 3 & 15.
l For capacitance tolerances available see page 15.
l For ordering information see page 15.
Note: Maximum capacitance values are shown below as 3 digit
code: 2 significant figures followed by the no. of zeros
e.g. 183 = 18,000pF. R denotes decimal e.g. 2R7 = 2.7pF.
www.novacap.com | Phone: +1.661.295.5920 | 17
Chip Ordering Information
Capacitance Code
1st two digits are
significant, third
digit denotes
number of zeros,
R = decimal
Examples:
1R0 = 1.0pF
120 = 12pF
471 = 470pF
102 = 1,000pF
273 = 0.027µF
474 = 0.47µF
105 = 1.0µF
Voltage Code
1st two digits are significant,
third digit denotes number of
zeros. For example:
160 = 16 Volts
101 = 100 Volts
501 = 500 Volts
102 = 1,000 Volts
502 = 5,000 Volts
103 = 10,000 Volts
Termination Codes
PPalladium Silver
PR Palladium Silver*
KSolderable Palladium Silver*
NNickel Barrier*100% tin
YNickel Barrier 90% tin, 10% lead
NG Nickel Barrier Gold Flash*
CFlexiCap™/Nickel Barrier*100% tin
DFlexiCap™/Nickel Barrier 90% tin, 10% lead
BCopper Barrier*100% tin
ECopper Barrier 90% tin, 10% lead
SSilver*
* Indicates RoHS terminations
Marking
None Unmarked
MMarked
*Marking not
available on
sizes < 0603
Packaging
None Bulk
TTape & Reel
W Waffle Pack
Hi-Reliability
Testing Criteria
HB MIL-PRF-55681 Group A
HV MIL-PRF-49467 Group A
HS MIL-PRF-123 Group A
Prefix
Case Size
Dielectric
Capacitance
Capacitance
Tolerance
Voltage
Termination
Special
Thickness
High Reliability
Testing
Packaging
Marking
High Reliability
Test Criteria
XX 1206 N 472 J 101 N X050 H T M HB
Dielectric Codes
NC0G/NP0 Ultra Stable
MC0G/NP0 Ultra Stable Magnetic Free
FC0G/NP0 High Temp. (up to 160ºC)
DC0G/NP0 High Temp. (up to 200ºC)
KR3L Ultra Stable
RR2D Pulse Energy
YY5V General Purpose
ZZ5U General Purpose
BX7R Stable
CX7R Stable Magnetic Free
XBX MIL
SX8R High Temp. (up to 150ºC)
EClass II High Temp. (up to 200ºC)
GClass II High Temp. (up to 160ºC)
WX5R Stable
RN Lead free C0G/NP0 Ultra Stable
RB Lead free X7R Stable
BB X7R BME Stable
BW X5R BME Stable
Capacitance Tolerance Codes
Code Tolerance
* Not RF series
C0G/NP0 R3L R2D Y5V
Z5U X7R BX X8R Class
II X5R Positive
VTC
N M F/D K R Y/Z B C X S E/G W P
B±0.10pF
Cap. Value
< 10pF
• •
C±0.25pF • • •
D±0.50pF • • •
F±1% •••
G±2% ••••
J±5% ••••• •*• •*• •
K±10% ••••• •••••••
M±20% • •••••••••••
Z+80% -20% • • • •*•
P+100% -0% • • • •*•
High Reliability
Testing
None Standard product
H High Reliability Testing
HHigh Temp Screening
Special Thickness
None Standard thickness
as per Novacap
catalog specifications
X Denotes a special
thickness other than
standard. Specify in
inches if required.
(As shown above X
= 0.050”)
{
-
Prefix Definitions
None Standard chip
RF Improved ESR Capacitor p. 23
LS Y3 Certified Safety Capacitor p. 42 - 43
ES Y2 Certified Safety Capacitor p. 42 - 43
ST Stacked Capacitor Assembly p. 48 - 53
SM Stacked Hi-Rel Capacitor Assembly p. 48 - 53
CR Cap-Rack Capacitor Array p. 54
RC Bleed Resistor p. 58 - 61
www.novacap.com | Phone: +1.661.295.5920 | 15
L
W
MB
T
L
W
MB
T
Technical Summary
Palladium Silver
Palladium Silver
Solderable
Palladium Silver
Nickel Barrier
100% tin
Nickel Barrier
90/10% tin/lead
Nickel Barrier
Gold flash
FlexiCap™/Nickel Barrier
100% tin
FlexiCap™/Nickel Barrier
90/10% tin/lead
Copper Barrier
100% tin
Copper Barrier
90/10% tin/lead
Solderable Silver
RoHS RoHS RoHS RoHS RoHS RoHS RoHS
Dielectric Code
P PR K N Y NG C D B E S
C0G/NP0
N/RN
•••••••• •
R3L
K
••••••••
X7R
B/RB
•••••••• •
X7R BME
BB
•••
X5R BME
BW
•••
BX
X
•••••••• •
Y5V
Y
• •
Z5U
Z
• •
C0G/NP0 (Mag free)
M
••• ••
X7R (Mag free)
C
••• ••
X8R
S
••••• •• •
C0G/NP0 (160ºC)
F
••••• •• •
C0G/NP0 (200ºC)
D
• •
Class II (160ºC)
G
••••• •• •
Class II (200ºC)
E
• •
Pulse Power
P
•••
R2D
R
•••
Technical Information
Novacap provides application notes throughout this catalog
as a guide to chip selection and attachment methods. Refer
to the Novacap Technical Brochure found at www.novacap.
com for more details. This technical information includes
the nature of capacitance, dielectric properties, electrical
properties, classes of dielectrics, ferroelectric behavior, test
standards, and high reliability test plans. Please do not
hesitate to contact the sales office for any product or technical
assistance.
Capacitor Size
Size availability is based primarily on capacitance values and
voltage rating. Smaller units are generally less expensive.
Because mass affects the thermal shock susceptibility of chip
capacitors, size selection should consider the soldering method
used to attach the chip to the board. Sizes 1812 and smaller
can be wave, vapor phase, or reflow soldered. Larger units
require reflow soldering.
Chip Selection
Multilayer capacitors (MLC) are categorized by dielectric
performance with temperature. The Temperature Coefficient
of Capacitance describes the variance of capacitance value
with temperature. The choice of components is therefore
largely determined by the temperature stability required of the
device and the size necessary for the desired capacitance value
and voltage rating.
Packaging
Units are available reeled, in waffle pack, or bulk packaged.
Bar coded labels are standard for reeled and bulk packaging.
Dielectric
Termination
Combinations
Primary Dielectric Types
C0G/NP0:
Ultra stable Class I dielectric, with negligible dependence of
capacitance on temperature, voltage, frequency, and time.
Used in circuitry requiring very stable performance.
X7R:
Stable Class II dielectric, with predictable change in properties
across a temperature range of -55°C to +125°C. Used as
blocking, decoupling, bypassing, and frequency discriminating
elements. This dielectric is ferroelectric and provides higher
capacitance than Class I materials.
BX:
The military specification for ceramic chip capacitors (MIL-
PRF-55681) defines a mid-K stable dielectric designated as BX.
The BX specification has voltage temperature limits in addition
to temperature limits of capacitance. The BX dielectric is
limited to ±15% maximum change in capacitance between
25°C and -55°C or +125°C and also has a voltage restriction
of +15% / -25% maximum change in capacitance between
25°C and -55°C or +125°C at rated voltage.
Z5U/Y5V:
General purpose Class III dielectrics with higher dielectric
constant and greater variation of properties over temperature
and voltage. Very high capacitance per volume is attainable
for general purpose applications where stability over a wide
temperature range is not critical.
Termination Material
We recommend the following
termination types:
Solder Attachment:
N Nickel Barrier, 100% matte
tin plated - RoHS
C FlexiCap™ with Nickel
Barrier, 100% tin plated - RoHS
Y Nickel Barrier, tin-lead plated
D FlexiCap™ Nickel Barrier,
tin-lead plated
B Copper Barrier 100% matte
tin plated - RoHS
E Copper Barrier, tin-lead
plated
K Solderable Palladium Silver -
RoHS (suitable for conductive epoxy attach)
S Solderable Silver - RoHS
Conductive Epoxy attachment:
P Palladium Silver
PR Palladium Silver - RoHS
NG Nickel Barrier Gold Flash -
RoHS (suitable for soldering attach)
www.novacap.com | Phone: +1.661.295.5920 | 3
C0G/NP0 (F) Ultra Stable High Temperature (up to 160ºC)
Operating temperature range: -55°C to 160°C
Temperature coefficient: 0 ±30 ppm/ºC
Dissipation factor: 0.1% max @ 25ºC
Insulation resistance @25ºC:
@160ºC:
>100GW or >1000WF whichever is less
>1GW or >10WF whichever is less
Dielectric <200V:
withstanding 201-500V:
voltage >500V:
250%
150% or 500V whichever is greater
120% or 750V whichever is greater
Ageing rate: 0% per decade
Test parameters: 1KHz, 1.0 ±0.2 VRMS, 25°C
1MHz for Capacitance <100pF
Dielectric Characteristics
C0G/NP0 (N) Ultra Stable and RoHS 2013 (RN) type
Operating temperature range: -55°C to 125°C
Temperature coefficient: 0 ±30 ppm/ºC
Dissipation factor: 0.1% max @ 25ºC
Insulation resistance @25ºC:
@125ºC:
>100GW or >1000WF whichever is less
>10GW or >100WF whichever is less
Dielectric <200V:
withstanding 201-500V:
voltage >500V:
250%
150% or 500V whichever is greater
120% or 750V whichever is greater
Ageing rate: 0% per decade
Test parameters: 1KHz, 1.0 ±0.2 VRMS, 25°C
1MHz for Capacitance <100pF
C0G/NP0 (D) Ultra Stable High Temperature (up to 200ºC)
Operating temperature range: -55°C to 200°C
Temp. coefficient <200ºC: 0 ±30 ppm/ºC
Dissipation factor @ 25ºC: 0.1% Max.
Insulation resistance @25ºC:
@200ºC:
>100GW or >1000WF whichever is less
>1GW or >10WF whichever is less
Dielectric
withstanding
voltage
<200V:
201-500V:
>500V:
250%
150% or 500V whichever is greater
120% or 750V whichever is greater
Ageing rate: 0% per decade
Test parameters: 1KHz, 1.0 ±0.2 VRMS, 25°C
1MHz for capacitance <100pF
TEMPERATURE COEFFICIENT
50
25
0
-25
-50
-55 -25 025 50 75 100 125
DC ppm
% CAPACITANCE CHANGE
TEMPERATURE °C
TYPICAL
UPPER LIMIT
LOWER LIMIT
C0G/NP0 (M) Ultra Stable Non Magnetic
Operating temperature range: -55°C to 125°C
Temperature coefficient: 0 ±30 ppm/ºC
Dissipation factor: 0.1% max @ 25ºC
Insulation resistance @25ºC:
@125ºC:
>1000WF or >10000WF whichever is less
>100WF or >1000WF whichever is less
Dielectric <200V:
withstanding 201-500V:
voltage >500V:
250%
150% or 500V whichever is greater
120% or 750V whichever is greater
Ageing rate: 0% per decade
Test parameters: 1KHz, 1.0 ±0.2 VRMS, 25°C
1MHz for Capacitance <100pF
TEMPERATURE COEFFICIENT
50
25
0
-25
-50
-55 -25 025 50 75 100 125
DC ppm
% CAPACITANCE CHANGE
TEMPERATURE °C
TYPICAL
UPPER LIMIT
LOWER LIMIT
-55 -25 02550 10075 125 150 175 200
20
40
0
-20
-40
TEMPERATURE COEFFICIENT
DC ppm
% CAPACITANCE CHANGE
TEMPERATURE °C
-55 -25 02550 10075 125 150
20
40
0
-20
-40
TEMPERATURE COEFFICIENT
DC ppm
% CAPACITANCE CHANGE
TEMPERATURE °C
4 | Phone: +1.661.295.5920 | www.novacap.com
L
W
MB
T
Chip Dimensions
Dimensions - inches (mm)
Size Length (L) Width (W) Max. Thickness (T)* Termination Band (MB)
0402 0.040 ± 0.004 (1.02 ± 0.102) 0.020 ± 0.004 (0.508 ± 0.102) 0.024 (0.610) 0.010 ± 0.006 (0.254 ± 0.152)
0504 0.050 ± 0.006 (1.27 ± 0.152) 0.040 ± 0.006 (1.02 ± 0.152) 0.044 (1.12) 0.014 ± 0.006 (0.356 ± 0.152)
RF0505 0.055 +0.015 -0.010 (1.4 +0.38 -0.25) 0.055 ± 0.015 (1.40 ± 0.381) 0.057 (1.45) 0.014 ± 0.006 (0.356 ± 0.152)
0603 0.060 ± 0.006 (1.52 ± 0.152) 0.030 ± 0.006 (0.762 ± 0.152) 0.035 (0.889) 0.014 ± 0.006 (0.356 ± 0.152)
0805 0.080 ± 0.008 (2.03 ± 0.203) 0.050 ± 0.008 (1.27 ± 0.203) 0.054 (1.37) 0.020 ± 0.010 (0.508 ± 0.254)
0907 0.090 ± 0.008 (2.29 ± 0.203) 0.070 ± 0.008 (1.78 ± 0.203) 0.060 (1.52) 0.020 ± 0.010 (0.508 ± 0.254)
1005 0.100 ± 0.008 (2.54 ± 0.203) 0.050 ± 0.008 (1.27 ± 0.203) 0.054 (1.37) 0.020 ± 0.010 (0.508 ± 0.254)
RF1111 0.110+0.025 -0.010 (2.79 +0.64 -0.25) 0.110 ± 0.015 (2.79 ± 0.381) 0.102 (2.59) 0.020 ± 0.010 (0.508 ± 0.254)
1206 0.125 ± 0.008 (3.18 ± 0.203) 0.060 ± 0.008 (1.52 ± 0.203) 0.064 (1.63) 0.020 ± 0.010 (0.508 ± 0.254)
1210 0.125 ± 0.008 (3.18 ± 0.203) 0.100 ± 0.008 (2.54 ± 0.203) 0.065 (1.65) 0.020 ± 0.010 (0.508 ± 0.254)
1515 0.150 ± 0.015 (3.81 ± 0.381) 0.150 ± 0.015 (3.81 ± 0.381) 0.130 (3.30) 0.030 ± 0.015 (0.762 ± 0.381)
1808 0.180 ± 0.012 (4.57 ± 0.305) 0.080 ± 0.008 (2.03 ± 0.203) 0.065 (1.65) 0.024 ± 0.014 (0.610 ± 0.356)
1812 0.180 ± 0.012 (4.57 ± 0.305) 0.125 ± 0.008 (3.18 ± 0.203) 0.065 (1.65) 0.024 ± 0.014 (0.610 ± 0.356)
1825 0.180 ± 0.012 (4.57 ± 0.305) 0.250 ± 0.015 (6.35 ± 0.381) 0.080 (2.03) 0.024 ± 0.014 (0.610 ± 0.356)
2020 0.200 ± 0.015 (5.08 ± 0.381) 0.200 ± 0.015 (5.08 ± 0.381) 0.180 (4.57) 0.024 ± 0.014 (0.610 ± 0.356)
2221 0.220 ± 0.015 (5.59 ± 0.381) 0.210 ± 0.015 (5.33 ± 0.381) 0.080 (2.03) 0.030 ± 0.015 (0.762 ± 0.381)
2225 0.220 ± 0.015 (5.59 ± 0.381) 0.250 ± 0.015 (6.35 ± 0.381) 0.080 (2.03) 0.030 ± 0.015 (0.762 ± 0.381)
2520 0.250 ± 0.015 (6.35 ± 0.381) 0.200 ± 0.015 (5.08 ± 0.381) 0.180 (4.57) 0.030 ± 0.015 (0.762 ± 0.381)
RF2525 0.230 +0.020 -0.012 (5.84 +0.51 -0.30) 0.250 ± 0.015 (6.35 ± 0.381) 0.165 (4.19) 0.030 ± 0.015 (0.762 ± 0.381)
3333 0.330 ± 0.017 (8.38 ± 0.432) 0.330 ± 0.017 (8.38 ± 0.432) 0.250 (6.35) 0.030 ± 0.015 (0.762 ± 0.381)
3530 0.350 ± 0.018 (8.89 ± 0.457) 0.300 ± 0.015 (7.62 ± 0.381) 0.250 (6.35) 0.030 ± 0.015 (0.762 ± 0.381)
4040 0.400 ± 0.020 (10.2 ± 0.508) 0.400 ± 0.020 (10.2 ± 0.508) 0.300 (7.62) 0.040 ± 0.020 (1.02 ± 0.508)
4540 0.450 ± 0.023 (11.4 ± 0.584) 0.400 ± 0.020 (10.2 ± 0.508) 0.300 (7.62) 0.040 ± 0.020 (1.02 ± 0.508)
5440 0.540 ± 0.027 (13.7 ± 0.686) 0.400 ± 0.020 (10.2 ± 0.508) 0.300 (7.62) 0.040 ± 0.020 (1.02 ± 0.508)
5550 0.550 ± 0.028 (14.0 ± 0.711) 0.500 ± 0.025 (12.7 ± 0.635) 0.300 (7.62) 0.040 ± 0.020 (1.02 ± 0.508)
6560 0.650 ± 0.033 (16.5 ± 0.838) 0.600 ± 0.030 (15.2 ± 0.762) 0.300 (7.62) 0.040 ± 0.020 (1.02 ± 0.508)
7565 0.750 ± 0.038 (19.1 ± 0.965) 0.650 ± 0.033 (16.5 ± 0.838) 0.300 (7.62) 0.040 ± 0.020 (1.02 ± 0.508)
* Non standard thicknesses are available - consult the sales office for details.
12 | Phone: +1.661.295.5920 | www.novacap.com
