H
Rocker
Dimensions are shown: Inch (mm)
Specifications and dimensions subject to change
www.ck-components.com
7000 Series
Miniature Rocker & Lever Handle Switches
Models Available
Features/Benefits
•Multi-pole and multi-position
•Wide variety of actuator and
termination options
•Epoxy terminal-seal compatible
with bottom wash cleaning
•RoHS compliant
Typical Applications
•Telecommunications
•Instrumentation
•Medical equipment
Specifications
CONTACT RATING: B contact material: 0.4 VA max. @ 20 V AC or
DC max. Q contact material: 5 AMPS @ 120 V AC or 28 V DC;
2 AMPS @ 250 V AC. See page H-21 for additional ratings.
ELECTRICAL LIFE: 7X01 and UX1 models: 100,000 make-and-break
cycles at full load. All other models: 40,000 cycles.
CONTACT RESISTANCE: Below 10 m Ωtyp. initial @ 2-4
V DC, 100 mA, for both silver and gold plated contacts.
INSULATION RESISTANCE: 109Ωmin.
DIELECTRIC STRENGTH: 1000 Vrms min. @ sea level.
OPERATING TEMPERATURE: –30ºC to 85ºC.
SOLDERABILITY: Per MIL-STD-202F method 208D, or
EIA RS-186E method 9 (1 hour steam aging).
NOTE: Any models supplied with S, P, R, Q, B or G contact material are RoHS compliant.
NOTE: Specifications and materials listed above are for switches with standard options.
For information on specific and custom switches, consult Customer Service Center.
Materials
CASE: Glass filled nylon 6/6, flame retardant, heat stabilized, or
diallyl phthalate (DAP) (UL 94V-0).
ACTUATOR: Nylon, black.
FRAME (FRONT MOUNT): Nylon, black.
FRAME (REAR MOUNT): Spring steel, black.
BUSHING: Brass or zinc, nickel plated.
HOUSING: Stainless steel.
SWITCH SUPPORT: Brass or steel, matte-tin plated.
END CONTACTS: B contact material: Copper alloy, with gold plate over
nickel plate. Q contact material: Coin silver, silver plated. See page
H-21 for additional contact materials.
CENTER CONTACTS & ALL TERMINALS: B contact material: Copper
alloy, with gold plate over nickel plate. Q contact material: Copper
alloy, silver plated. See page H-21 for additional contact materials.
TERMINAL SEAL: Epoxy. Refer to Soldering and Cleaning in Technical
Data Section
HARDWARE: Mounting nuts & screws: Brass. Lockwasher: Stainless
steel. Standoff: Nylon standard.
Build-A-Switch
To order, simply select desired option from each category and place in the appropriate box. Available options are shown and
described on pages H-5 through H-25 . For additional options not shown in catalog, consult Customer Service Center. All models
have epoxy terminal seal and are compatible with all “bottom-wash” PCB cleaning methods.
Switch Function
7101 SP On-None-On
7103 SP On-Off-On
7105 SP Mom.-Off-Mom.
7107 SP On-Off-Mom.
7108 SP On-None-Mom.
7109 SP None-On-Mom.
7201 DP On-None-On
7203 DP On-Off-On
7205 DP Mom.-Off-Mom.
7207 DP On-Off-Mom.
7208 DP On-None-Mom.
7211 DP On-On-On
7213 DP On-On-Mom.
7215 DP Mom.-On-Mom.
7301 3P On-None-On
7303 3P On-Off-On
7401 4P On-None-On
7405 4P Mom.-Off-Mom.
74114P On-On-On
Note: UL/CSA models
available, see pages H-5
and H-6.
Actuator
J1 .531 long rocker
J2 Lever
J3 .906" long rocker
J8 .699" long rocker
J10 1.318" long rocker
J11 Rocker with frame
J15 Rocker, snap-in
J16 Rocker with frame, snap-in
J19 Rocker with frame
J21 Lever with frame
J25 Lever, snap-in
J26 Lever with frame, snap-in
J37 Rocker with frame
J50 Rocker
J51 Rocker with frame
J52 Rocker with frame for
LED, snap-in
J60 Lever
J61 Lever with frame, snap-in
J62 Lever with frame for
LED, snap-in
J90 Lever
J91 Lever with frame, snap-in
Terminations
ARight angle, PC thru-hole
AV2 Vertical right angle, PC thru-hole
CPC Thru-hole
ZSolder lug
A3 Right angle, snap-in, PC thru-hole
AV3 Vertical right angle,
snap-in, PC thru-hole
AW3 Right angle, extended, PC thru-hole
V2 .555" high, V-bracket
V3 .460" high, V-bracket
V4 .630" high, V-bracket
V5 Vertical right angle, PC thru-hole
V6 .460" high, V-bracket
V7 .630" high, V-bracket
V8 .953" high, V-bracket
V9 1.150" high, V-bracket
V31 .460" high, V-bracket, snap-in
V51 Vertical right angle, snap-in
V61 .460" high, V-bracket, snap-in
W.750" long, wire wrap
W3 .425" long, wire wrap
W5 1.305" long,wire wrap
Z3 Quick connect
Seal
EEpoxy
IEpoxy potted base
Actuator Color
2Black
1White
3Red
Frame Color
2Black
NONE No frame color required
1White
Metal Frame Color
(J11, J19, J21 &
J37 Actuators)
2Black
1White
H–4
Contact Material
BGold
PGold, matte tin
QSilver
SSilver, matte-tin
GGold over silver
RGold over silver, matte-tin
7000 Series
Miniature Rocker & Lever Handle Switches
SWITCH FUNCTION
DPDT
2-1,5-4
N/A
OPEN
N/A
2-3,5-4
2-3,5-6
ON NONE ON
ON OFF ON
MOM. OFF MOM.
ON OFF MOM.
ON NONE MOM.
ON ON ON
ON ON MOM.
MOM. ON MOM.
U21
U23
U25
U27
U28
U211*
U213*
U215*
7201
7203
7205
7207
7208
7211*
7213*
7215*
DP
SPDT
2-1
2-1
N/A
OPEN
N/A
2-3
2-3
N/A
ON NONE ON
ON OFF ON
MOM. OFF MOM.
ON OFF MOM.
ON NONE MOM.
NONE ON MOM.
U11
U13
U15
U17
U18
U19
7101
7103
7105
7107
7108
7109
SP
SCHEMATIC
CONNECTED TERMINALS
POS. 1 POS. 2 POS. 3
SWITCH FUNCTION
POS. 1 POS. 2 POS. 3
UL/CSA**
MODEL
NO.
MODEL NO.
NO.
POLES C&K marking on opposite sideC&K marking on opposite side
Terminal Nos.
For Reference Only
Terminal Nos.
For Reference Only
DPDT
SPDT
Part number shown: 7101J1ZQE2
Part number shown: 7201J1ZQE2
* Wiring for 3-way switch, see Section O.MOM. = Momentary
** U11 through U413 model nos. with all options when ordered with G, Q, R or S contact material.
H
Rocker
Dimensions are shown: Inch (mm)
Specifications and dimensions subject to change
www.ck-components.com
H–5
7000 Series
Miniature Rocker & Lever Handle Switches
SWITCH FUNCTION
C&K marking on opposite sideC&K marking on opposite side
* Wiring for 3-way switch: See Technical Data section of this
catalog for RoHS compliant and compatible definitions and
specifications.
MOM. = Momentary
** U11 through U411 model nos. with all options when ordered with G, Q, R or S contact material.
H
Rocker
Dimensions are shown: Inch (mm)
Specifications and dimensions subject to change
www.ck-components.com
H–6
7301
7303
U31
U33
3P ON NONE ON
ON OFF ON
7401
7405
7411*
U41
U45
U411*
ON NONE ON
MOM. OFF MOM.
ON ON ON
2-3,5-6,8-9,11-12
N/A
OPEN
2-3,5-4,8-9,11-10
2-1,5-4,8-7,11-10
4PDT
4P
2-3,5-6,8-9
N/A
OPEN
2-1,5-4,8-7
3PDT
NO.
POLES MODEL NO. UL/CSA**
MODEL
NO.
SWITCH FUNCTION
POS. 1 POS. 2 POS. 3
CONNECTED TERMINALS
POS. 1 POS. 2 POS. 3
SCHEMATIC
Part number shown: 7301J1ZQE2
3PDT
Terminal Nos.
For Reference Only
4PDT
Terminal Nos.
For Reference Only
Part number shown: 7401J1ZQE2
H
Rocker
7000 Series
Miniature Rocker & Lever Handle Switches
ACTUATOR–PANEL REAR MOUNT
DIMPLES
MFG. OPTION
DIMPLES MFG.
OPTION
PANEL MOUNTING
J8 Actuator
J3 Actuator
J10 Actuator
J1 & J2 Actuators
2BLACK
1WHITE
3RED
ACTUATOR
COLOR
OPTION
CODE
Finish: Matte. Other colors, custom actuator
markings and legends available, consult
Customer Service Center.
NOTE: Hardware: two each—mounting screws,
nuts, lockwashers and standoffs for 1/8 inch thick
panel are supplied standard on all switches with
panel mounting brackets. Actuators available
separately, see page H-22. Hardware is available
see Technical Data section of this catalog.
J1, J2, J3, J8 & J10 Actuators available with
C, W-W5, Z or Z3 terminations.
J1 ROCKER
J2 LEVER
J3 ROCKER
J8 ROCKER
J10 ROCKER
ACTUATOR COLOR
ACTUATOR
Dimensions are shown: Inch (mm)
Specifications and dimensions subject to change
www.ck-components.com
H–7
7000 Series
Miniature Rocker & Lever Handle Switches
ACTUATOR–SNAP-IN FRONT MOUNT
PANEL MOUNTING
J50 Actuator
*
J15, J16, J25 & J26 Actuators
J15 ROCKER, SNAP-IN
J16 ROCKER WITH FRAME, SNAP-IN
J25 LEVER, SNAP-IN
J26 LEVER WITH FRAME, SNAP-IN
J50 ROCKER, SNAP-IN
Finish: Matte. Other colors, custom actuator
markings and legends available, consult
Customer Service Center.
NOTE: Actuators & frames available
separately, see pages H-22 and H-25. J15,
J16, J25, J26, J50 & J51 Actuators available
with 71XX, 72XX, U1XX & U2XX models
and C, W-W5, Z and Z3 terminations.
* For J50: Increase this dimension to .620/.625
(15,75/15,88) for .091/.125 (2,31/3,18) thk. panels.
No frame color choice required
No frame color choice required
No frame color choice required
2BLACK
1WHITE
3RED
ACTUATOR
COLOR
OPTION
CODE
2BLACK
NONE No Frame Color
(J15 or J25options)
1WHITE
FRAME COLOR
OPTION
CODE
ACTUATOR COLOR
FRAME COLORACTUATOR
H
Rocker
Dimensions are shown: Inch (mm)
Specifications and dimensions subject to change
www.ck-components.com
H–8
7000 Series
Miniature Rocker & Lever Handle Switches
ACTUATOR–SNAP-IN FRONT MOUNT
PANEL MOUNTING
J51, J60 & J61 Actuators
*
J52 Actuator
*
J51 ROCKER WITH FRAME, SNAP-IN
J52 ROCKER WITH FRAME FOR LED, SNAP-IN
J60 LEVER, SNAP-IN
J61 LEVER WITH FRAME, SNAP-IN
Finish: Matte. Other colors, custom actuator
markings and legends available, consult Customer
Service Center.
NOTE: Actuators & frames available separately, see
pages H-22 and H-25. J51, J52, J60 & J61 Actuators
available with 71XX, 72XX, U1XX & U2XX models
and C, W-W5, Z and Z3 terminations.
For J51, J52: Increase this dimension to .620/.625
(15,75/15,88) for .060/.125(1,52/3,18) thk. panels.
No frame color choice required
LED not included.
For LED information, see page H-24.
2BLACK
1WHITE
3RED
ACTUATOR
COLOR
OPTION
CODE
2BLACK
NONE No Frame Color
(J15 or J25 options)
1WHITE
FRAME COLOR
OPTION
CODE
ACTUATOR COLOR
FRAME COLORACTUATOR
H
Rocker
Dimensions are shown: Inch (mm)
Specifications and dimensions subject to change
www.ck-components.com
H–9
H–10
H
Rocker
Dimensions are shown: Inch (mm)
Specifications and dimensions subject to change
www.ck-components.com
7000 Series
Miniature Rocker & Lever Handle Switches
ACTUATOR–SNAP-IN FRONT MOUNT
PANEL MOUNTING
J90, J91 & J93 Actuators
*
J62 Actuator
*
J62 LEVER WITH FRAME FOR LED, SNAP-IN
J90 LEVER, SNAP-IN
J91 LEVER WITH FRAME, SNAP-IN
Finish: Matte. Other colors, custom actuator
markings and legends available, consult
Customer Service Center.
NOTE: Actuators & frames available separately,
see pages H-22 and H-25. J62, J90 & J91
Actuators available with 71XX, 72XX, U1XX &
U2XX models and C, W-W5, Z & Z3 terminations.
* For J90: Increase this dimension to .620/.625
(15,75/15,88) for .091/.125 (2,31/3,18) thk. panels.
For J91: Increase this dimension to .620/.625
(15,75/15,88) for .060/.125 (1,52/3,18) thk. panels.
2BLACK
1WHITE
3RED
ACTUATOR
COLOR
OPTION
CODE
2BLACK
NONE No Frame Color
(J90 options)
1WHITE
FRAME COLOR
OPTION
CODE
No frame color choice required.
LED not included.
For LED information, see page H-25.
ACTUATOR COLOR
FRAME COLORACTUATOR
7000 Series
Miniature Rocker & Lever Handle Switches
ACTUATOR–REAR MOUNT
PANEL MOUNTING
J11 & J21 Actuators
J19 Actuator
J37 Actuator
J11 ROCKER WITH FRAME
J19 ROCKER WITH FRAME
J21 LEVER WITH FRAME
J37 ROCKER WITH FRAME
Actuator finish: Matte. Frame finish: Gloss. Other
colors, custom actuator markings and legends
available, consult Customer Service Center.
NOTE: Actuators & frames available separately,
see pages H-22 and H-25. J11, J19, J21 & J37
Actuators available with C, W-W5, Z & Z3
terminations.
2BLACK
1WHITE
3RED
ACTUATOR
COLOR
OPTION
CODE
2BLACK
1WHITE
FRAME COLOR
OPTION
CODE
FRAME COLORACTUATOR
H–11
H
Rocker
Dimensions are shown: Inch (mm)
Specifications and dimensions subject to change
www.ck-components.com
ACTUATOR–PC MOUNT
J1 ROCKER
J2 LEVER
J3 ROCKER
J8 ROCKER
J50 ROCKER
Finish: Matte. Other colors, custom actuator
markings and legends available, consult
Customer Service Center.
NOTE: Some permissible actuator/termination
combinations may lack clearance between
actuator and PC board, and care must be
exercised to accommodate this condition.
Actuators available separately, see page H-22.
J1, J2 & J8 actuators available with A, A3, AV2,
AV3, AW3 & V2 terminations. J3 actuators
available with AV2, AV3 & V2-V61 terminations.
J50 actuators available with A (DP, 3P models
only), A3 (DP, 3P models only), AV2, AV3, AW3
(DP, 3P models only) & V2-V61 terminations.
2BLACK
1WHITE
3RED
ACTUATOR
COLOR
OPTION
CODE
ACTUATOR COLOR
ACTUATOR
H–12
H
Rocker
7000 Series
Miniature Rocker & Lever Handle Switches
Dimensions are shown: Inch (mm)
Specifications and dimensions subject to change
www.ck-components.com
7000 Series
Miniature Rocker & Lever Handle Switches
ACTUATOR–PC MOUNT
TERMINATIONS
PC MOUNTING
Dim 'A'
SPDT thru 4PDT SPDT thru 4PDT
Z3 QUICK CONNECT W, W3, W5 WIRE WRAP
SPDT thru 4PDT Not available with P, R or S contact materials.
Available actuators, see pages H-7 through H-13.
Not available with P, R or S contact materials. Available
actuators, see pages H-7 through H-13. Mating quick
connector available; order part number 530100000,
page H-23.
NOTE: Available actuators, see
pages H-7 through H-13.
NOTE: Available actuators, see pages H-7 through H-13.
Finish: Matte. Other colors, custom actuator
markings and legends available, consult
Customer Service Center.
NOTE: Some permissible actuator/termination
combinations may lack clearance between
actuator and PC board, and care must be
exercised to accommodate this condition.
Actuators available separately, see page H-22.
J60 & J90 actuators available with A (DP, 3P
models only), A3 (DP, 3P models only), AV2,
AV3, AW3 (DP, 3P models only) & V2-V61
terminations.
SPDT thru 4PDT
ZSOLDER LUG CPC THRU-HOLE
J90 LEVER
J60 LEVER
ACTUATOR COLOR
ACTUATOR
2BLACK
1WHITE
3RED
ACTUATOR
COLOR
OPTION
CODE
W.750 (19,05)
W3 .425 (10,80)
W5 1.305 (33,15)
DIM ‘A’
OPTION
CODE
H–13
H
Rocker
Dimensions are shown: Inch (mm)
Specifications and dimensions subject to change
www.ck-components.com
7000 Series
Miniature Rocker & Lever Handle Switches
TERMINATIONS
PC MOUNTING
Actuator Shown In Pos. 1 SECTION A-A
Actuator Shown In Pos. 1
SECTION A-A
.14
(3,6)
PC MOUNTING
A3 RIGHT ANGLE, SNAP-IN, PC THRU-HOLE
ARIGHT ANGLE, PC THRU-HOLE
A3 RIGHT ANGLE, SNAP-IN, PC THRU-HOLE AW3 RIGHT ANGLE, EXTENDED,
PC THRU-HOLE
ARIGHT ANGLE, PC THRU-HOLE
Not available with I seal option. Available actuators, see pages H-7 and H-13.
Terminal bend radii and lead-in manufacturing option. NOTE: PC pattern must clear switch support leg.
Not available with I seal option. Available actuators, see pages H-7 and H-13.
Terminal bend radii and lead-in manufacturing option.
7101J1ABE2
Horizontal Actuation
SPDT
7201J1ABE2
Horizontal Actuation
DPDT
H–14
H
Rocker
Dimensions are shown: Inch (mm)
Specifications and dimensions subject to change
www.ck-components.com
TERMINATIONS
7000 Series
Miniature Rocker & Lever Handle Switches
Actuator Shown In Pos. 1
SECTION A-A
PC MOUNTING
Actuator Shown In Pos. 1
SECTION A-A
PC MOUNTING
AV3 VERTICAL RIGHT ANGLE, SNAP-IN, PC THRU-HOLE,
.150" PITCH
AV2 VERTICAL RIGHT ANGLE, PC THRU-HOLE,
.150" PITCH
ARIGHT ANGLE, PC THRU-HOLE
Not available with I seal option. Available actuators, see pages H-7 and H-13.
Terminal bend radii and lead-in manufacturing option.
Not available with I seal option. Available actuators, see pages H-7 and H-13.
Terminal bend radii and lead-in manufacturing option.
7301J1ABE2
Horizontal Actuation
3PDT
7101J1AV2BE2
Vertical Actuation
SPDT
H–15
H
Rocker
Dimensions are shown: Inch (mm)
Specifications and dimensions subject to change
www.ck-components.com
7000 Series
Miniature Rocker & Lever Handle Switches
TERMINATIONS
Actuator Shown In Pos. 1 SECTION A-A
Actuator Shown In Pos. 1 SECTION A-A
PC MOUNTING
PC MOUNTING
AV3 VERTICAL RIGHT ANGLE, SNAP-IN, PC THRU-HOLE,
.150" PITCH
AV2 VERTICAL RIGHT ANGLE, PC THRU-HOLE,
.150" PITCH
AV3 VERTICAL RIGHT ANGLE, SNAP-IN, PC THRU-HOLE,
.150" PITCH
AV2 VERTICAL RIGHT ANGLE, PC THRU-HOLE,
.150" PITCH
7201J1AV2BE2
Vertical Actuation
DPDT
7301J1AV2BE2
Vertical Actuation
3PDT
Not available with I seal option. Available actuators, see pages H-7 and H-13.
Terminal bend radii and lead-in manufacturing option.
Not available with I seal option. Available actuators, see pages H-7 and H-13.
Terminal bend radii and lead-in manufacturing option.
H–16
H
Rocker
Dimensions are shown: Inch (mm)
Specifications and dimensions subject to change
www.ck-components.com
TERMINATIONS
7000 Series
Miniature Rocker & Lever Handle Switches
Actuator Shown In Pos. 1 SECTION A-A
PC MOUNTING
PC MOUNTING
Actuator Shown In Pos. 1 SECTION A-A
V51 VERTICAL RIGHT ANGLE, SNAP-IN,
PC THRU-HOLE, .150" PITCH
V5 VERTICAL RIGHT ANGLE, PC THRU-HOLE,
.150" PITCH
AV3 VERTICAL RIGHT ANGLE, SNAP-IN, PC THRU-HOLE,
.150" PITCH
AV2 VERTICAL RIGHT ANGLE, PC THRU-HOLE,
.150" PITCH
Not available with I seal option. Available actuators, see pages H-7 and H-13.
Terminal bend radii and lead-in manufacturing option.
Not available with I seal option. Available actuators, see pages H-7 and H-13.
Terminal bend radii and lead-in manufacturing option.
7401J1AV2BE2
Vertical Actuation
4PDT
7101J1V5BE2
Vertical Actuation
SPDT
H–17
H
Rocker
Dimensions are shown: Inch (mm)
Specifications and dimensions subject to change
www.ck-components.com
7000 Series
Miniature Rocker & Lever Handle Switches
TERMINATIONS
Actuator Shown In Pos. 1
PC MOUNTING
PC MOUNTING
Actuator Shown In Pos. 1 SECTION A-A
V61 VERTICAL MOUNT, V-BRACKET, SNAP-IN
V2, V6, V7, V8 VERTICAL MOUNT, V-BRACKET
V51 VERTICAL RIGHT ANGLE, SNAP-IN,
PC THRU-HOLE, .150" PITCH
V5 VERTICAL RIGHT ANGLE, PC THRU-HOLE,
.150" PITCH
Not available with I seal option. Available actuators, see pages H-7 and H-13.
Terminal bend radii and lead-in manufacturing option.
Not available with I seal option.
Available actuators, see pages H-7 and H-13.
7101J1__BE2
SPDT
7201J1V5BE2
Vertical Actuation
DPDT
V2, V21 .555 (14,10)
V6, V61 .460 (11,68)
V7 .630 (16,00)
V8 .953 (24,21)
DIM ‘A’
OPTION
CODE
H–18
H
Rocker
Dimensions are shown: Inch (mm)
Specifications and dimensions subject to change
www.ck-components.com
TERMINATIONS
7000 Series
Miniature Rocker & Lever Handle Switches
Actuator Shown In Pos. 1
SNAP-IN
PC MOUNTING
Actuator Shown In Pos. 1
SNAP-IN
PC MOUNTING
Actuator Shown In Pos. 1
SNAP-IN
PC MOUNTING
V2, V7, V8 VERTICAL MOUNT, V-BRACKET
V21 VERTICAL MOUNT, V-BRACKET, SNAP-IN
V2, V7, V8 VERTICAL MOUNT, V-BRACKET
V21, V61 VERTICAL MOUNT, V-BRACKET, SNAP-IN
V2, V6, V7, V8 VERTICAL MOUNT, V-BRACKET
Not available with I seal option.
Available actuators, see pages H-7 and H-13.
Not available with I seal option.
Available actuators, see pages H-7 and H-13.
Not available with I seal option.
Available actuators, see pages H-7 and H-13.
V21 VERTICAL MOUNT, V-BRACKET, SNAP-IN
V2, V21 .555 (14,10)
V6, V61 .460 (11,68)
V7 .630 (16,00)
V8 .953 (24,21)
DIM ‘A’
OPTION
CODE
V2, V21 .555 (14,10)
V7 .630 (16,00)
V8 .953 (24,21)
DIM ‘A’
OPTION
CODE
V2, V21 .555 (14,10)
V7 .630 (16,00)
V8 .953 (24,21)
DIM ‘A’
OPTION
CODE
7201J1__BE2
DPDT
7401J1__BE2
4PDT
7301J1__BE2
3PDT
H–19
H
Rocker
Dimensions are shown: Inch (mm)
Specifications and dimensions subject to change
www.ck-components.com
7000 Series
Miniature Rocker & Lever Handle Switches
TERMINATIONS
PC MOUNTING
Actuator Shown In Pos. 1
SNAP-IN
PC MOUNTING
Actuator Shown In Pos. 1
SNAP-IN
PC MOUNTING
Actuator Shown In Pos. 1
SNAP-IN
V4, V9 VERTICAL MOUNT, V-BRACKET
V31 VERTICAL MOUNT, V-BRACKET, SNAP-IN
V3, V4, V9 VERTICAL MOUNT, V-BRACKET
V31 VERTICAL MOUNT, V-BRACKET, SNAP-IN
V3, V4, V9 VERTICAL MOUNT, V-BRACKET
Not available with I seal option.
Available actuators, see pages H-7 and H-13.
Not available with I seal option.
Available actuators, see pages H-7 and H-13.
Not available with I seal option.
Available actuators, see pages H-7 and H-13.
7101J1__BE2
SPDT
7201J1__BE2
DPDT
7301J1__BE2
3PDT
V3, V31 .460 (11,68)
V4 .630 (16,00)
V9 1.150 (29,21)
DIM ‘A’
OPTION
CODE
V3, V31 .460 (11,68)
V4 .630 (16,00)
V9 1.150 (29,21)
DIM ‘A’
OPTION
CODE
V4 .630 (16,00)
V9 1.150 (29,21)
DIM ‘A’
OPTION
CODE
H–20
H
Rocker
Dimensions are shown: Inch (mm)
Specifications and dimensions subject to change
www.ck-components.com
TERMINATIONS
H–21
7000 Series
Miniature Rocker & Lever Handle Switches
CONTACT MATERIAL
SEAL
'A'
Actuator Shown In Pos. 1
SNAP-IN
PC MOUNTING
* Note: See Technical Data section of this catalog for RoHS compliant and compatible definitions and specifications.
Available with C, W through W5, Z & Z3 terminations.
1CONTACTS & TERMINALS: Copper alloy, with gold plate over nickel plate.
2END CONTACTS: Coin silver, with gold plate over nickel plate.
3CENTER CONTACTS & ALL TERMINALS: Copper alloy, with gold plate
over nickel plate.
4END CONTACTS: Coin silver, silver plated.
5CENTER CONTACT & ALL TERMINALS: Copper alloy, silver plated.
6TERMINALS: Copper alloy, with matte-tin over nickel plate.
U11-U415 model numbers with all options when ordered with G, L, M,
Q, S & R contact material.
B contact material standard with all terminations except C, Z & Z3.
Q contact material standard with C, Z & Z3 terminations.
P, S & R, contact materials not available with Z & Z3 terminations.
K, L and M options represent Non RoHS tin lead product and are not recommended for
new designs. For additional information please contact Customer Service.
NOTE: Any models supplied with Q, B, G S, P & R contact material are RoHS compliant.
V4 .630 (16,00)
V9 1.150 (29,21)
DIM ‘A’
OPTION
CODE
SP .410 (10,41)
DP .440 (11,18)
3P .505 (12,83)
4P .505 (12,83)
DIM ‘A’
NO.
POLES
V4, V9 VERTICAL MOUNT, V-BRACKET
7401J1__BE2
4PDT
EEPOXY SEAL IEPOXY POTTED BASE
Not available with I seal option.
Available actuators, see pages H-7 and H-13.
H
Rocker
Dimensions are shown: Inch (mm)
Specifications and dimensions subject to change
www.ck-components.com
OPTION
CODE CONTACT
MATERIAL TERMINAL
PLATING RATINGS
SILVER 5
MATTE-TIN 6
GOLD 1
SILVER 4,5
GOLD OVER SILVER 2,3 GOLD 3
MATTE-TIN 6
GOLD 1
MATTE-TIN 6
LOW LEVEL/
DRY CIRCUIT
POWER
LOW LEVEL/DRY
CIRCUIT OR POWER
0.4 VA MAX. @ 20 V AC OR DC MAX.
5 AMPS @ 120 V AC OR 28 V DC; 2 AMPS @ 250 V AC.
0 4 VA MAX @ 20 V AC OR DC MAX OR 5 AMPS @
120 V AC OR 28 V DC; 2 AMPS @ 250 V AC.
B
P
Q
S
G
R
7000 Series
Miniature Rocker & Lever Handle Switches
AVAILABLE HARDWARE
TYPICAL ASSEMBLY SCREW
PANEL THICKNESS
STAND-OFF
LOCKWASHER
NUT
STAND-OFF
LENGTH
Panel mounting hardware for rocker and lever handle switches is
available separately. Mounting hardware consists of two screws,
two nuts, two standoffs and two lockwashers per switch, and is
available for panel thicknesses of 1/16, 3/32 and 1/8 inch.
See part numbers below.
J1 & J2 actuators
J10 actuators
J3 actuators
PART NO. PANEL THK. STANDOFF LENGTH
761101000 1/16 IN. (1,59) .295 (7,49)
761102000 3/32 IN. (2,38) .264 (6,71)
761103000 1/8 IN. (3,18) .233 (5,92)
PART NO. PANEL THK. STANDOFF LENGTH
770701000 1/16 IN. (1,59) .295 (7,49)
770702000 3/32 IN. (2,38) .264 (6,71)
770703000 1/8 IN. (3,18) .233 (5,92)
PART NO. PANEL THK. STANDOFF LENGTH
770601000 1/16 IN. (1,59) .295 (7,49)
770602000 3/32 IN. (2,38) .264 (6,71)
770603000 1/8 IN. (3,18) .233 (5,92)
MATERIAL
Screws, nuts, lockwashers: Stainless steel. Standoffs: Nylon, standard.
J1, J11, J15 & J16 Actuators
PART NO.
776A01000 WHITE
776A02263 BLACK
776A03000 RED
Material: Nylon
Finish: Matte
J50, J51 & J52 Actuators
PART NO.
775A01000 WHITE
775A02263 BLACK
775A03000 RED
Material: Nylon
Finish: Matte
J60, J61 & J62 Actuators
PART NO.
598101000 WHITE
613802263 BLACK
598103000 RED
Material: Nylon
Finish: Matte
J8 Actuator
PART NO.
488701000 WHITE
488702263 BLACK
488703000 RED
Material: Nylon
Finish: Matte
J2, J21, J25 & J26 Actuators
PART NO.
760501000 WHITE
760502263 BLACK
760503000 RED
Material: Nylon
Finish: Matte
J3 & J37 Actuators
PART NO.
766601000 WHITE
766602263 BLACK
766603000 RED
Material: Nylon
Finish: Matte
H–22
H
Rocker
Dimensions are shown: Inch (mm)
Specifications and dimensions subject to change
www.ck-components.com
AVAILABLE HARDWARE
7000 Series
Miniature Rocker & Lever Handle Switches
J90 & J91 Actuators
PART NO.
598001000
WHITE
598002263
BLACK
598003000 RED
Material: Nylon
Finish: Matte
J10 & J19 Actuators
PART NO.
769501000 WHITE
769502263 BLACK
769503000 RED
Material: Nylon
Finish: Matte
Fits Z3 Termination
female connector
PART NO.
530100000
Available in loose pieces.
Frame for J11 & J21 Actuators
PART NO.
764500746 BLACK ENAMEL
764500747 WHITE ENAMEL
764601106 RETAINING SPRING
Material: Spring Steel
Frame for J19 Actuator
PART NO.
781000746 BLACK ENAMEL
781000747 WHITE ENAMEL
Material: Spring Steel
Frame for J37 Actuator
PART NO.
445400746 BLACK ENAMEL
445400747 WHITE ENAMEL
Material: Spring Steel
Frame for J52 & J62 Actuators
PART NO.
613301000 WHITE
613302263 BLACK
613303000 RED
Material: Nylon
Finish: Matte
Frame for J16 & J26 Actuators
PART NO.
459101000 WHITE
459102000 BLACK
459103000 RED
Material: Nylon
Finish: Matte
Frame for J51, J61 & J91 Actuators
PART NO.
615601000 WHITE
615602263 BLACK
615603000 RED
Material: Nylon
Finish: Matte
H–23
H
Rocker
Dimensions are shown: Inch (mm)
Specifications and dimensions subject to change
www.ck-components.com
7000 Series
Miniature Rocker & Lever Handle Switches
AVAILABLE HARDWARE
.495 – .505
(12,57 – 12,83)
.797 – .803
(20,24 – 20,40)
.005 R. MAX.
(0,13) TYP. .495 – .505
(12,57 – 12,83)
.595 – .605
(15,11 – 15,37)
.005 R.
(0,13)
MAX. TYP.
.495 – .505
(12,57 – 12,83)
.620 – .625
(15,75 – 15,88)
.005 R.
(0,13)
MAX. TYP.
PANEL MOUNTING
For part numbers
4529xxxxx, 4527xxxxx,
4528xxxxx, 4526xxxxx
For part numbers
4325xxxxx, 4326xxxxx
For part numbers
4327xxxxx, 4328xxxxx
TYPICAL APPLICATION
NOTE: Other colors available, consult Customer Service Center.
Frame for J50, J60 & J90 Actuators
J1 & J2 Actuators
J50, J60 & J90 Actuators
MATTE
PART NO.
486701000
WHITE
486702000
BLACK
4867
03000 RED
Material: Nylon
GLOSS
PART NO.
486801000
WHITE
486802000
BLACK
4868
03000 RED
.125” (3,18) PANEL THK.
PART NO.
452601000
WHITE
452602263
BLACK
4526
03000 RED
.047” (1,19) PANEL THK.
PART NO.
452901000
452902263
4529
03000
.062” (1,57) PANEL THK.
PART NO.
452701000
452702263
4527
03000
.090” (2,29) PANEL THK.
PART NO.
452801000
452802263
4528
03000
.125” (3,18) PANEL THK.
PART NO.
432801000
WHITE
432802263
BLACK
4328
03000 RED
.047” (1,19) PANEL THK.
PART NO.
432501000
432502263
4325
03000
.062” (1,57) PANEL THK.
PART NO.
432601000
432602263
4326
03000
.090” (2,29) PANEL THK.
PART NO.
432701000
432702263
4327
03000
Frames snap into panel opening and are independent from switch mounting. Accurate positioning of the
PC mounted switch relative to the panel opening is necessary to provide proper clearance between actuator
and frame. Available in two basic styles and four panel thicknesses .047-.125 in. Material: Nylon. Finish: Matte.
H–24
H
Rocker
Dimensions are shown: Inch (mm)
Specifications and dimensions subject to change
www.ck-components.com
7000 Series
Miniature Rocker & Lever Handle Switches
AVAILABLE HARDWARE
.030
(0,76)
.200 DIA.
(5,08˘)
.025 SQ.
TYP. (0,63)
.750
(19,05)
.340
(8,64)
.230 DIA.
(5,84˘)
Flat denotes
cathode.
Above frames (part nos. 432XXXXXX) are also available with insert which accepts LED for
indicator light assembly. Order insert separately from frame. Blank insert panel (without hole
for LED) also available. LED not included.
LED INFORMATION
Process Information: Soldering to LED leads must be completed within 5 seconds at
500º F (260ºC) maximum.
LEDs are not supplied with J52, J62 options. LED snaps into switch frame surrounding
actuator and is wired externally.
Panel Inserts
Will fit Separate Snap-in frames for
J50, J60 & J90 actuators
NOTE: Special colors, custom markings available, consult Customer Service Center.
Suggested LED for J52 & J62 options.
Dimensions for reference only.
BLANK PANEL INSERT
WITHOUT HOLE FOR LED
PART NO.
476601000
WHITE
476602000
BLACK
4766
03000 RED
PANEL INSERT
WITH HOLE FOR LED
PART NO.
894901000
894902000
8949
03000
H–25
H
Rocker
Dimensions are shown: Inch (mm)
Specifications and dimensions subject to change
www.ck-components.com