RoHS Single Port RJ45 CONNECTOR WITH INTEGRATED MAGNETICS,TAB DOWN 10/100 Base-T Ethernet Application Meets IEEE 802.3 & ANSI X 3.263 standards Impedance: 100OHMS Transmit open circuit inductance (OCL): 350uH (MIN) @100KHz,0.1VRMS with 8mA DC Bias Always EU RoHS/ELV Compliant, wave solder capable to 265C RJ45 jack cavity conforms to FCC rules and regulations Part 68, SUB Part F Standard operating temp: 0C to +70C (see footnote) Industrial operating temp: -40C to +85C (see footnote) Electrical Specifications @ 25C Part Number AR1007-1328_ OCL(uH Min) @ 100kHz, 0.1V With 8mA DC Bias 350 Insertion Loss (dB Max) 0.5-100MHz 1.1 Turns Ratio chip: cable (3%) 1CT:1CT Return Loss (dB Min) 30.1-60MHz 18-20*log(f/30) 0.5-30MHz 18 60.1-80MHz 12 Electrical Specifications @ 25C Part Number EMI Fingers LED (L/R) AR1007-1328_ YES G/Y Cross Talk (dB Min) 0.5-40MHz 40.1-100MHz 35 33-20*log(f/50) *Complete part number by inserting "S" for Standard Temp. or "I" for Industrial Temp. CMRR (dB Min) 0.5-100MHz HI-POT (VDC) 30 2250 All specifications subject to change without notice. MECHANICAL Unless otherwise specified all tolerances are: 0.25 in mm AR1007-1328_ 21.60 Max LED-L GREEN LED-R YELLOW 3.5 13.50 15.90 2.54 3.38 3.05 5.08 P9 P10 P11 8.89 P12 ALLIED AR1007-1328_ YYWW P1 P8 Back View 714-665-1140 ALLIED COMPONENTS INTERNATIONAL REVISED 1501/07/11 www.alliedcomponents.com RoHS Single Port RJ45 CONNECTOR WITH INTEGRATED MAGNETICS,TAB DOWN SCHEMATICS AR1007-1328_ 1CT:1CT 1CT:1CT 2KV 1000pF GREEN P9 P11 YELLOW Notes: 1. R1-R4=75OHMS,1/16W,5%Resistors. P10 P12 2. C1=1000pF,2KV Decouping Capacitor. 3. LED Compliant With IEC60825-1 Saftety of Laser Products When operated Up to 20mA. 4. LED Forward Voltage: 2.1V(TYP), LED Power Dissipation: 105mW, LED Peak Wavelength: Green=565nm, Yellow=5 PCB LAYOUT Unless otherwise specified all tolerances are: 0.05 in mm AR1007-1328_ 15. 49 11. 43 2 3. 38 7 12 10 9 5. 08 1 8. 89 8 3. 05 2. 54 7*1.27 =8.89 11 7.57 2. 54 MATERIALS AR1007-1328_ Housing: PBT, Flammability Rating 94V-O. Shell: C2680 Brass, 0.20mm thick, 50u"Min nickel plating. Mod Jack Contacts: Phosphor Bronze, 0.35mm thick, 6u" Gold plated. LED: Diffused Epoxy Lens, 0.5x0.5mm Carbon Steel wireframe leads. 714-665-1140 ALLIED COMPONENTS INTERNATIONAL REVISED 1501/07/11 www.alliedcomponents.com