VS-1N1183, VS-1N3765, VS-1N1183A, VS-1N2128A Series
www.vishay.com Vishay Semiconductors
Revision: 10-Jul-2018 1Document Number: 93492
For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Power Silicon Rectifier Diodes,
(Stud Version), 35 A, 40 A, 60 A
FEATURES
Low leakage current series
Good surge current capability up to 1000 A
Material categorization: for definitions of
compliance please see www.vishay.com/doc?99912
Note
(1) JEDEC® registered values
ELECTRICAL SPECIFICATIONS
Notes
Basic type number indicates cathode to case. For anode to case, add “R” to part number, e.g., 1N1188R, 1N3766R, 1N1186RA, 1N2135RA
(1) JEDEC® registered values
(2) For 1N1183 Series and 1N3765 Series TC = -65 °C to +190 °C
PRIMARY CHARACTERISTICS
IF(AV) 35 A, 40 A, 60 A
Package DO-5 (DO-203AB)
Circuit configuration Single
DO-5 (DO-203AB)
MAJOR RATINGS AND CHARACTERISTICS
PARAMETER TEST CONDITIONS 1N1183 1N3765 1N1183A 1N2128A UNITS
IF(AV)
35 (1) 35 (1) 40 (1) 60 (1) A
TC140 (1) 140 (1) 150 (1) 140 (1) °C
IFSM
50 Hz 480 380 765 860 A
60 Hz 500 (1) 400 (1) 800 (1) 900 (1)
I2t50 Hz 1140 730 2900 3700 A2s
60 Hz 1040 670 2650 3400
I2t 16 100 10 300 41 000 52 500 A2s
VRRM Range 50 to 600 (1) 700 to 1000 (1) 50 to 600 (1) 50 to 600 (1) V
TJ-65 to +200 -65 to +200 -65 to +200 -65 to +200 °C
VOLTAGE RATINGS
TYPE NUMBER
VRRM, MAXIMUM REPETITIVE
PEAK REVERSE VOLTAGE
(TJ = -65 °C to +200 °C (2))
V
VRM, MAXIMUM DIRECT
REVERSE VOLTAGE
(TJ = -65 °C to +200 °C (2))
V
VS-1N1183 VS-1N1183A VS-1N2128A 50 (1) 50 (1)
VS-1N1184 VS-1N1184A VS-1N2129A 100 (1) 100 (1)
VS-1N1185 VS-1N1185A VS-1N2130A 150 (1) 150 (1)
VS-1N1186 VS-1N1186A VS-1N2131A 200 (1) 200 (1)
VS-1N1187 VS-1N1187A VS-1N2133A 300 (1) 300 (1)
VS-1N1188 VS-1N1188A VS-1N2135A 400 (1) 400 (1)
VS-1N1189 VS-1N1189A VS-1N2137A 500 (1) 500 (1)
VS-1N1190 VS-1N1190A VS-1N2138A 600 (1) 600 (1)
VS-1N3765 VS-1N2160 700 (1) 700 (1)
VS-1N3766 800 (1) 800 (1)
VS-1N3767 900 (1) 900 (1)
VS-1N3768 1000 (1) 1000 (1)
VS-1N1183, VS-1N3765, VS-1N1183A, VS-1N2128A Series
www.vishay.com Vishay Semiconductors
Revision: 10-Jul-2018 2Document Number: 93492
For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Notes
(1) JEDEC® registered values
(2) I2t for time tx = I2t x tx
Notes
(1) JEDEC registered values®
(2) Recommended for pass-through holes
(3) Recommended for holed threaded heatsinks
FORWARD CONDUCTION
PARAMETER SYMBOL TEST CONDITIONS 1N1183 1N3765 1N1183A 1N2128A UNITS
Maximum average forward current
at case temperature IF(AV) 1-phase operation,
180° sinusoidal conduction
35 (1) 35 (1) 40 (1) 60 (1) A
140 (1) 140 (1) 150 (1) 140 (1) °C
Maximum peak one cycle
non-repetitive surge current IFSM
Half cycle 50 Hz
sine wave or 6 ms
rectangular pulse
Following any
rated load
condition and
with rated
VRRM applied
480 380 765 860
A
Half cycle 60 Hz
sine wave or 5 ms
rectangular pulse
500 (1) 400 (1) 800 (1) 900 (1)
Half cycle 50 Hz
sine wave or 6 ms
rectangular pulse
Following any
rated load
condition and
with ½ VRRM
applied following
surge = 0
570 455 910 1000
Half cycle 60 Hz
sine wave or 5 ms
rectangular pulse
595 475 950 1050
Maximum I2t for fusing
I2t
t = 10 ms With rated VRRM
applied following
surge, initial
TJ = TJ maximum
1140 730 2900 3700
A2s
t = 8.3 ms 1040 670 2650 3400
Maximum I2t for individual
device fusing
t = 10 ms With VRRM = 0
following surge,
initial
TJ = TJ maximum
1610 1030 4150 5250
t = 8.3 ms 1470 940 3750 4750
Maximum I2t for individual
device fusing I2t (2) t = 0.1 to 10 ms,
VRRM = 0 following surge 16 100 10 300 41 500 52 500 A2s
Maximum peak forward voltage
at maximum forward current (IFM)VFM TJ = 25 °C 1.7 (1) 1.8 (1) 1.3 (1) 1.3 (1) V
110 110 126 188 A
Maximum average
reverse current
VRRM = 700
IR(AV)
Maximum rated IF(AV) and TC
-5.0
(1) --
mA
VRRM = 800 - 4.0 (1) --
VRRM = 900 - 3.0 (1) --
VRRM = 1000 - 2.0 (1) --
Maximum rated IF(AV), VRRM and TC10 (1) -2.5
(1) 10 (1)
THERMAL AND MECHANICAL SPECIFICATIONS
PARAMETER SYMBOL TEST CONDITIONS 1N1183 1N3765 1N1183A 1N2128A UNITS
Maximum operating
case temperature range TC-65 to +190 (1) -65 to +200
°C
Maximum storage
temperature range TStg -65 to +175 (1) -65 to +200
Maximum internal thermal
resistance, junction to case RthJC DC operation 1.00 (1) 1.1 (1) 0.65 (1)
°C/W
Thermal resistance,
case to sink RthCS Mounting surface, smooth, flat and greased 0.25
Maximum allowable
mounting torque
(+ 0 %, - 10 %)
Not lubricated thread, tighting on nut (2) 3.4 (30)
N · m
(lbf · in)
Lubricated thread, tighting on nut (2) 2.3 (20)
Not lubricated thread, tighting on hexagon (3) 4.2 (37)
Lubricated thread, tighting on hexagon (3) 3.2 (28)
Approximate weight 17 g
0.6 oz.
Case style JEDEC® DO-5 (DO-203AB)
VS-1N1183, VS-1N3765, VS-1N1183A, VS-1N2128A Series
www.vishay.com Vishay Semiconductors
Revision: 10-Jul-2018 3Document Number: 93492
For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Fig. 1 - Maximum Allowable Case Temperature vs.
Average Forward Current, 1N1183 and 1N3765 Series
Fig. 2 - Typical Low Level Forward Power Loss vs.
Average Forward Current (Sinusoidal Current Waveform),
1N1183 and 1N3765 Series
Fig. 3 - Typical High Level Forward Power Loss vs.
Average Forward Current (Sinusoidal Current Waveform),
1N1183 and 1N3765 Series
Fig. 4 - Typical Forward Voltage vs. Forward Current,
1N1183 and 1N3765 Series
Fig. 5 - Maximum Non-Repetitive Surge Current vs.
Number of Current Pulses, 1N1183 and 1N3765 Series
Fig. 6 - Average Forward Current vs. Maximum Allowable Case
Temperature, 1N1183A Series
Maximum Allowable Case Temperature (°C)
Average Forward Current Over Full Cycle (A)
0
10
20 30 40 50 60
130
120
110
100
140
150
160
170
180
190
Ø
Conduction Period
DC
+180 °C
+120 °C
+60 °C
Average Forward Power Loss
Over Full Cycle (W)
Average Forward Current Over Full Cycle (A)
01020304050
0
40
20
10
30
50
60
70
DC
+180 °C
+120 °C
+60 °C
TJ = 190 °C
Ø
Conduction Period
Average
Forward Current
Over Full Cycle (A)
Average Forward Power Loss
Over Full Cycle (W)
105
104
103
102
104
103
102
10
10 Conduction Period
Ø
DC
+180 °C
+120 °C
+60 °C
TJ = 140 °C
IF - Instantaneous Forward Current (A)
IF - Instantaneous Forward Voltage (V)
01 3 5264
102
103
101
1
TJ = 190 °C
TJ = 25 °C
Typical
Peak Half Sine Wave
Forward Current (Per Unit)
Number of Equal Amplitude
Current Pulses (N)
1246810204060
0.3
0.7
0.5
0.4
0.6
0.8
0.9
1.0
At any rated load condition and with
rated VRRM applied following surge
50 Hz 60 Hz
Series Per Unit Base-A
1N1183 500
1N3765 400
Average Forward Current
Over Full Cycle (A)
Maximum Allowable CaseTemperature (°C)
30
20
10
0
40
50
60
70
80
90
100
110 130 150 170 190120 140 160 180 200
DC
+60 °C & Wave
+120 °C & Wave
+180 °C Wave
+Conduction Period
+180 °C Wave
VS-1N1183, VS-1N3765, VS-1N1183A, VS-1N2128A Series
www.vishay.com Vishay Semiconductors
Revision: 10-Jul-2018 4Document Number: 93492
For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Fig. 7 - Maximum Low Level Forward Power Loss vs.
Average Forward Current, 1N1183A Series
Fig. 8 - Maximum High Level Forward Power Loss vs.
Average Forward Current, 1N1183A Series
Fig. 9 - Maximum Forward Voltage vs. Forward Current,
1N1183A Series
Fig. 10 - Maximum Non-Repetitive Surge Current vs.
Number of Current Pulses, 1N1183A Series
Fig. 11 - Maximum Non-Repetitive Surge Current vs.
Number of Current Pulses, 1N2128A Series
Fig. 12 - Maximum Allowable Case Temperature vs.
Average Forward Current, 1N2128A Series
Average Forward Power Loss
Over Full Cycle (W)
30
20
10
0
40
50
60
70
80
90
100
010203040 6050 70
+180 °C Wave
+180 °C Wave
+Conduction Period
TJ = 200 °C
DC
+120 °C & Wave
+60 °C & Wave
Average Forward Current Over Full Cycle (A)
Average
Forward Power Loss
Over Full Cycle (W)
+180 °C Wave
+180 °C Wave
+Conduction Period
T
J
= 200 °C
DC
+120 °C & Wave
+60 °C & Wave
Average
Forward Current Over Full Cycle (A)
10
3
10
4
10
2
10
1
10 10
2
10
3
Instantaneous Forward Current (A)
Instantaneous Forward Voltage (V)
104
103
102
10
1
10-1
1.5 20.50 1 2.5 3 3.5
TJ = 25 °C
TJ = 200 °C
Maximum Peak Half Sine Wave
Forward Current (Per Unit)
Number of Equal Amplitude
Current Pulses (N)
1246810204060
0.3
0.7
0.5
0.4
0.6
0.8
0.9
1.0
At any rated load condition and with
rated VRRM applied following surge
50 Hz
60 Hz
Series Per Unit Base-A
1N1183A 800
Maximum Peak Half Sine Wave
Forward Current (Per Unit)
Number of Equal Amplitude
Current Pulses (N)
1246810204060
0.3
0.7
0.5
0.4
0.6
0.8
0.9
1.0
At any rated load condition and with
rated VRRM applied following surge
50 Hz
60 Hz
Series Per Unit Base-A
1N2128A 900
Maximum Allowable Case Temperature (°C)
Average
Forward Current Over Full Cycle (A)
01020 30 40 6050 70
60
140
100
80
120
160
180
200
9080 100
+Conduction Period
+120 °C & Wave
+60 °C & Wave
DC
+180 °C Wave
+180 °C Wave
VS-1N1183, VS-1N3765, VS-1N1183A, VS-1N2128A Series
www.vishay.com Vishay Semiconductors
Revision: 10-Jul-2018 5Document Number: 93492
For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Fig. 13 - Maximum Low Level Forward Power Loss vs.
Average Forward Current, 1N2128A Series
Fig. 14 - Maximum High Level Forward Power Loss vs.
Average Forward Current, 1N2128A Series
Fig. 15 - Maximum Forward Voltage vs. Forward Current,
1N2128A Series
Average
Forward Power Loss
Over Full Cycle (W)
Average Forward Current Over Full Cycle (A)
0
40
20
10
30
50
60
70
01020304050
+120 °C & Wave
+60 °C & Wave
+180 °C Wave
+180 °C Wave
TJ = 140 °C
+Conduction Period
DC
Average
Forward Power Loss
Over Full Cycle (W)
Average Forward Current Over Full Cycle (A)
103
102
10
104103
104
105
103
102
10
+90 °C & Wave
+60 °C & Wave
+180 °C Wave
+180 °C Wave
+Conduction
Period
T
J
= 140 °C
+60 °C & Wave
+120 °C & Wave
+180 °C Wave
+180 °C Wave
DC
DC
LINKS TO RELATED DOCUMENTS
Dimensions www.vishay.com/doc?95360
01 234 657
103
104
102
101
1.0
T
J
= 25 °C
TJ = 140 °C
TJ = 25 °C
Instantaneous
Forward Current (A)
Instantaneous
Forward Voltage (V)
Document Number: 95360 For technical questions, contact: indmodules@vishay.com www.vishay.com
Revision: 29-Sep-08 1
DO-203AB (DO-5) for
1N1183, 1N3765, 1N1183A, 1N2128A, 1N3208 Series
Outline Dimensions
Vishay Semiconductors
DIMENSIONS in millimeters (inches)
1/4" 28UNF-2A
for metric devices: M6 x 1
Ø 14.6 (0.57)
4 (0.16) MIN.
Ø 4.10 (0.16)
Ø 3.80 (0.15)
25.4 (1.0) MAX.
1.0 (0.04)
MAX.
17.40 (0.68) MIN.
Across flats
6.1 (0.24)
7.0 (0.28)
10.7 (0.42)
11.5 (0.45)
10.8 (0.43)
11.4 (0.45)
1.03 (0.04)
MAX.
Legal Disclaimer Notice
www.vishay.com Vishay
Revision: 08-Feb-17 1Document Number: 91000
Disclaimer
ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE
RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE.
Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively,
“Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other
disclosure relating to any product.
Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or
the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all
liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special,
consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular
purpose, non-infringement and merchantability.
Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of
typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding
statements about the suitability of products for a particular application. It is the customer’s responsibility to validate that a
particular product with the properties described in the product specification is suitable for use in a particular application.
Parameters provided in datasheets and / or specifications may vary in different applications and performance may vary over
time. All operating parameters, including typical parameters, must be validated for each customer application by the customer’s
technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase,
including but not limited to the warranty expressed therein.
Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining
applications or for any other application in which the failure of the Vishay product could result in personal injury or death.
Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk.
Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for
such applications.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document
or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners.
© 2017 VISHAY INTERTECHNOLOGY, INC. ALL RIGHTS RESERVED