2016-01-04 1
2016-0 1-04
Silicon NPN Phototransistor with Vλ Characteristics
Version 1.3
SFH 3310
Ordering Information
Features:
•Spectral range of sensitivity: (typ) 350 ... 970 nm
•Package: 3mm Radial (T 1), Epoxy
•Special: Adapted to human eye sensitivity (Vλ)
Applications
•For control and drive circuits
•Ambient light detector
•Exposure meter for daylight and artificial light
•Sensor for backlight-dimming
Type: Photocurrent Ordering Code
IPCE [µA]
λ = 560 nm, Ee = 10 µW/cm2, VCE
= 5 V
SFH 3310 2.5 ... 8 Q65110A5343
2016-01-04 2
Version 1.3 SFH 3310
Maximum Ratings (TA = 25 °C)
Characteristics (TA = 25 °C)
Parameter Symbol Values Unit
Operating and storage temperature range Top; Tstg -40 ... 100 °C
Collector-emitter voltage VCE 5.5 V
Collector current IC20 mA
Emitter-collector voltage VEC 0.5 V
ESD withstand voltage
(acc. to ANSI/ ESDA/ JEDEC JS-001 - HBM)
VESD 2000 V
Parameter Symbol Values Unit
Wavelength of max. sensitivity (typ) λS max 570 nm
Spectral range of sensitivity (typ) λ10% (typ) 350
... 970
nm
Radiant sensitive area (typ) A 0.29 mm2
Dimensions of chip area (typ) L x W (typ) 0.75 x
0.75
mm x
mm
Half angle (typ) ϕ ± 75 °
Capacitance
(VCE = 0 V, f = 1 MHz, E = 0)
(typ) CCE 16 pF
Dark current
(VCE = 5 V, E = 0)
(typ (max)) ICE0 3 (≤ 50) nA
Version 1.3 SFH 3310
2016-01-04 3
Grouping (TA = 25 °C, λ = 560 nm)
Group Min Photocurrent Max Photocurrent Typ Photocurrent Collector-emitter
saturation
voltage
Ee = 10 μW/cm2,
VCE = 5 V
Ee = 10 μW/cm2,
VCE = 5 V
EV = 1000 lx, Std.
Light A, VCE = 5 V
IC = IPCEmin x 0.3, Ee
= 10 μW/cm2
IPCE, min [µA] IPCE, max [µA] IPCE [µA] VCEsat [mV]
SFH 3310-2 2.5 5 290 100
SFH 3310-3 4 8 460 100
Note.: IPCEmin is the min. photocurrent of the specified group
Relative Spectral Sensitivity 1) page 8
Srel = f(λ)
Photocurrent 1) page 8
IPCE = f(Ee),
V
CE = 5 V
rel
OHF00851
λ
S
400
0500 600 700 800 900 nm 1100
10
20
30
40
50
60
70
80
%
100
λ
V
PCE
OHF00852
I
1
1
V
E
Aµ
lx10 100 1000
10
100
1000
2016-01-04 4
Version 1.3 SFH 3310
Collector Current 1) page 8
IC = f(VCE), IB = Parameter
Photocurrent 1) page 8
IPCE / IPCE(25°C) = f(TA), VCE = 5 V
Collector-Emitter Capacitance 1) page 8
CCE = f(VCE), f = 1 MHz, E = 0
CE
OHF00854
I
0
0
A
CE
V
V
µ
1 2 3 4 5
10
20
30
40
50
60
70
80
200 lx
100 lx
20 lx
PCE
OHF01024
I
-50
0
A
T
˚C
I
PCE (25 ˚C)
-30 -10 10 30 50 90
0.2
0.4
0.6
0.8
1.0
1.2
1.4
1.8
0
pF
OHF04052
CE
C
CE
V
10-3 10-2 10-1 100101102
V
0.5
1.0
1.5
2.0
2.5
3.0
4.0
Version 1.3 SFH 3310
2016-01-04 5
Directional Characteristics 1) page 8
Srel = f(ϕ)
Package Outline
Dimensions in mm (inch).
Package
3mm Radial (T 1), Epoxy
0.6 (0.024)
0.4 (0.016)
4.0 (0.157)
3.6 (0.142)
ø3.1 (0.122)
ø2.9 (0.114)
2.0 (0.079)
1.7 (0.067)
3.1 (0.122)
2.5 (0.098)
3.5 (0.138)
4.5 (0.177)
4.1 (0.161)
1.8 (0.071)
1.2 (0.047)
29 (1.142)
27 (1.063)
2.54 (0.100)
spacing
0.7 (0.028)
0.4 (0.016)
Chip position
Area not flat
GEOY6446
0.4 (0.016)
0.8 (0.031)
Emitter
2016-01-04 6
Version 1.3 SFH 3310
Approximate Weight:
0.2 g
Note
Packing information is available on the internet (online product catalog).
Recommended Solder Pad
Dimensions in mm.
Note:
pad 1: emitter
Version 1.3 SFH 3310
2016-01-04 7
TTW Soldering
IEC-61760-1 TTW
Disclaimer
Language english will prevail in case of any discrepancies or deviations between the two language wordings.
Attention please!
The information describes the type of component and shall not be considered as assured characteristics.
Terms of delivery and rights to change design reserved. Due to technical requirements components may contain
dangerous substances.
For information on the types in question please contact our Sales Organization.
If printed or downloaded, please find the latest version in the Internet.
Packing
Please use the recycling operators known to you. We can also help you – get in touch with your nearest sales office.
By agreement we will take packing material back, if it is sorted. You must bear the costs of transport. For packing
material that is returned to us unsorted or which we are not obliged to accept, we shall have to invoice you for any
costs incurred.
Components used in life-support devices or systems must be expressly authorized for such purpose!
Critical components* may only be used in life-support devices** or systems with the express written approval of
OSRAM OS.
*) A critical component is a component used in a life-support device or system whose failure can reasonably be
expected to cause the failure of that life-support device or system, or to affect its safety or the effectiveness of that
device or system.
**) Life support devices or systems are intended (a) to be implanted in the human body, or (b) to support and/or
maintain and sustain human life. If they fail, it is reasonable to assume that the health and the life of the user may be
endangered.
2016-01-04 8
Version 1.3 SFH 3310
Glossary
1) Typical Values: Due to the special conditions of the manufacturing processes of LED, the typical data or
calculated correlations of technical parameters can only reflect statistical figures. These do not necessarily
correspond to the actual parameters of each single product, which could differ from the typical data and calculated
correlations or the typical characteristic line. If requested, e.g. because of technical improvements, these typ. data
will be changed without any further notice.
2016-01-04 9
Version 1.3 SFH 3310
Published by OSRAM Opto Semiconductors GmbH
Leibnizstraße 4, D-93055 Regensburg
www.osram-os.com © All Rights Reserved.