VXW1147BS PLCC-4 Type White LED (High Reliability type, White V-Series) Features Package Product features PLCC-4 Type, Diffused pale yellow resin Outer Dimension 3.5 x 2.8 x 1.9mm( L x W x H ) Wide operation temperature range. Storage Temperature : -40110 Operating Temperature : -40100 Operation Guarantee Spatial distribution characteristics. (21/2 : 120deg) Corresponding to a use requiring high reliability in cars etc... Lead-free soldering compatible RoHS compliant Chromaticity coordinates x = 0.31TYP., y = 0.32TYP. (Condition : IF=20mA) Spatial distribution 120 deg. Die materials InGaN Optical efficiency 22.7lm/W Rank grouping parameter Sorted by luminous intensity and chromaticity per rank taping Assembly method Auto pick & place machine (Auto Mounter) Soldering methods Reflow soldering and manual soldering Taping and reel 2,000pcs per reel in a 8mm width tape. (Standard) Reel diameter : 180mm ESD 1kV (HBM) Recommended Applications SW lighting for car indicators, meter panel, car audio and heater control, etc... 2006.10.30 Page 1 VXW1147BS PLCC-4 Type White LED (High Reliability type, White V-Series) Color and Luminous Intensity Part No. VXW1147BS Material InGaN (Ta=25) Emitted Color Lens Color White Pale Yellow Luminous Intensity Luminous Flux Iv (mcd) v (lm) MIN. TYP. IF TYP. IF 390 680 20 1.5 20 Note : The above luminous intensity(Iv) is the setup values of the sorting machine. (Tolerance : IV...10%) 2006.10.30 Page 2 VXW1147BS PLCC-4 Type White LED (High Reliability type, White V-Series) Absolute Maximum Ratings (Ta=25) Item Symbol Absolute Maximum Ratings Unit Power Dissipation Pd 120 mW Forward Current IF 30 mA IFRM 100 mA IF 0.50 mA/ IFRM 1.67 mA/ Reverse Voltage VR 5 V Operating Temperature T opr -40+100 Storage Temperature Tstg -40+110 Pulse Forward Current 1 Derating (Ta=67.5 or higher) 1 IFRM Measurement condition : Pulse Width1ms, Duty1/20 Thermal Characteristics Item Junction Temperature (MAX.) Thermal Resistance (TYP.) Symbol Ratings Unit Tj 110 R(th j-a) 250 / R(th j-s) 100 / (Junction/ ambient) Thermal Resistance (TYP.) (Junction/ Solder Point) Rth(j-a) Measurement Condition / Substrate: FR4(t=1.6mm) Pattern Size: 16mm2. 2007.1.11 Page 3 VXW1147BS PLCC-4 Type White LED (High Reliability type, White V-Series) Electro-Optical Characteristics Item Forward Voltage Condition IF=20mA Symbol (Ta=25) Characteristics TYP. 3.3 MAX. 4.0 Unit V VF Reverse Current VR =5V IR MAX. 10 A Half Intensity Angle IF=20mA 21/2 TYP. 120 deg. Chromaticity Coordinates x TYP. 0.31 - IF=20mA y TYP. 0.32 - 2006.10.30 Page 4 VXW1147BS PLCC-4 Type White LED (High Reliability type, White V-Series) Luminous Intensity Rank (Ta=25) Intensity Tolerance each Rank : +/-10% Rank C8 C9 CX CY CZ I V mcd Condition MIN. MAX. 390 470 470 560 560 680 IF=20mA 680 820 820 1,000 Please contact our sales staff concerning rank designation. 2006.10.30 Page 5 VXW1147BS PLCC-4 Type White LED (High Reliability type, White V-Series) Sorting Chart for Chromaticity Coordinates Chromaticity Coordinates Tolerance Each Rank : +/-0.01 LEFT DOWN point LEFT UP point RIGHT UP point RIGHT UP point Rank x y x y x y x y 1 0.280 0.248 0.264 0.267 0.283 0.305 0.296 0.276 2c 0.287 0.295 0.283 0.305 0.304 0.330 0.307 0.315 2d 0.296 0.276 0.287 0.295 0.307 0.315 0.311 0.294 2e 0.307 0.315 0.304 0.330 0.330 0.360 0.330 0.339 2f 0.311 0.294 0.307 0.315 0.330 0.339 0.330 0.318 3 0.330 0.318 0.330 0.360 0.361 0.385 0.356 0.351 Please contact our sales staff concerning rank designation. 2006.10.30 Page 6 VXW1147BS PLCC-4 Type White LED (High Reliability type, White V-Series) Technical Data Spectral Distribution Spatial Distribution Example Relative Intensity vs. Wavelength Condition : Ta = 25, IF = 20mA Relative Intensity Condition : Ta = 25 Wavelength [nm] Forward Voltage vs. Forward Current Forward Current vs. Relative Intensity Condition : Ta = 25 Relative Intensity Forward Current IF(mA) Condition : Ta = -2085 Forward Voltage VF(V) Forward Current IF(mA) 2006.10.30 Page 7 VXW1147BS PLCC-4 Type White LED (High Reliability type, White V-Series) Technical Data Derating Ambient Temperature vs. Relative Intensity Condition : IF= 20mA Relative Intensity Maximum Forward Current : IF MAX. (mA) Ambient Temperature vs. Maximum Forward Current Repetition Frequency : f 10Hz Ambient Temperature : Ta() Ambient Temperature : Ta() Ambient Temperature vs. Forward Voltage Forward Current vs. Chromaticity y Forward Voltage VF(V) Condition : Ta = 25 Ambient Temperature : Ta() 2006.10.30 x Page 8 VXW1147BS PLCC-4 Type White LED (High Reliability type, White V-Series) Technical Data Ambient Temperature vs. Chromaticity Duty Cycle vs. Maximum Forward Current y Maximum Forward Current : IF MAX. (mA) Condition : IF = 20mA x 2006.10.30 Duty(%) Page 9 VXW1147BS PLCC-4 Type White LED (High Reliability type, White V-Series) Package Dimensions (Unit: mm) Weight: (36.5)mg Recommended Soldering Pattern Taping Specification (Unit: mm) (Unit: mm) Quantity: 2,000pcs/ reel (standard) 2006.10.30 Page 10 VXW1147BS PLCC-4 Type White LED (High Reliability type, White V-Series) Reflow Soldering Conditions 1) The above profile temperature gives the maximum temperature of the LED resin surface. Please set the temperature so as to avoid exceeding this range. 2) Total times of reflow soldering process shall be no more than 2 times. When the second reflow soldering process is performed, intervals between the first and second reflow should be short as possible (while allowing some time for the component to return to room temperature after the first reflow) in order to prevent the LED resin from absorbing moisture. 3) Temperature fluctuation to the LED during the pre-heating process shall be minimized. (6 maximum) Manual Soldering Conditions Iron tip temp. Soldering time and frequency 2006.10.30 350 3 s 1 time (MAX.) (MAX.) (MAX.) Page11 VXW1147BS PLCC-4 Type White LED (High Reliability type, White V-Series) Reliability Testing Result Reliability Testing Result Room Temp. Operating Life High Temp. Operating Life Low Temp. Operating Life Wet High Temp. Operating Life Wet High Temp. Storage Life Applicable Standard High Temp. Storage Life Low Temp. Storage Life Cycled Temp. Humidity Life EIAJ ED4701/100(101) EIAJ ED4701/100(101) EIAJ ED4701/100(101) EIAJ ED4701/100(102) EIAJ ED4701/100(103) EIAJ ED4701/100(105) EIAJ ED4701/200(201) EIAJ ED4701/200(202) EIAJ ED4701/200(203) Resistance to Reflow Soldering EIAJ ED4701/300(301) Electric Static EIAJ ED4701/300(304) EIAJ ED4701/400(403) Thermal Shock 1 Discharge (ESD) Vibration, Variable Frequency Testing Conditions Duration Failure Ta = 25, IF = 30mA 1,000 h 0/20 Ta = 85 ,IF = 20mA 1,000 h 0/20 Ta = -40, IF = 30mA 1,000 h 0/20 Ta = 60, 90%, IF = 30mA 1,000 h 0/20 Ta = 60, 90% 1,000 h 0/20 1,000 cycles 0/20 Ta = 110 1,000 h 0/20 Ta = -40 1,000 h 0/20 10 cycles 0/20 2 times 0/20 once each polarity 0/20 2h 0/20 Ta = -40 110 (each 15min.) Ta = -10 60, 95%, 24h/cycle Moisture Soak : 30, 70%, 72h Preheat : 150180 (120s Max.) Soldering Temp. : 260 (5s) C = 100pF, R2 = 1.5K, 2,000V 2 98.1m/s (10G), 100 2KHz, 20min. XYZ each direction 1 Reference test Failure Criteria Items Symbols Conditions Failure criteria Luminous Intensity Iv IF=20mA Testing Min. Value Spec. Min. Value x 0.5 Forward Voltage VF IF=20mA Testing Max. Value Spec. Max. Value x 1.2 Reverse Current IR VR=5V Testing Max. Value Spec. Max. Value x 2.5 Cosmetic Appearance - - No notable, decoloration, deformation and cracking 2006.10.30 Page12 VXW1147BS PLCC-4 Type White LED (High Reliability type, White V-Series) Special Notice to Customers Using the Products and Technical Information Shown in This Data Sheet 1) The technical information shown in the data sheets are limited to the typical characteristics and circuit examples of the referenced products. It does not constitute the warranting of industrial property nor the granting of any license. 2) For the purpose of product improvement, the specifications, characteristics and technical data described in the data sheets are subject to change without prior notice. Therefore it is recommended that the most updated specifications be used in your design. 3) When using the products described in the data sheets, please adhere to the maximum ratings for operating voltage, heat dissipation characteristics, and other precautions for use. We are not responsible for any damage which may occur if these specifications are exceeded. 4) The products described in the data sheets are made to be used in standard electronic applications such as office automation appliances, communication devices, audio visual, home appliances, and measuring instruments. 5) If the products in the data sheets are to be used for purposes other than the above which requires high level reliability and safety where failure and or malfunction of the product may cause death or other serious effects on the human body such as airplane, space activity, transportation, medical, nuclear), please contact our sales personnel. 6) In order to export the products or technologies described in this data sheet which are under the "Foreign Exchange and Foreign Trade Control Law," it is necessary to first obtain an export permit from the Japanese government. 7) No part of this data sheet may be reprinted or reproduced without prior written permission from Stanley Electric Co., Ltd. 8) The most updated edition of this data sheet can be obtained from the address below: http://www.stanley-components.com 2006.10.30 Page13