Features
Recommended Applications
SW lighting for car indicators, meter panel, car audio and heater control, etc…
Page 1
Outer Dimension 3.5 x 2.8 x 1.9mm( L x W x H )
Wide operation temperature range.
Storage Temperature : -40℃~110
Operating Temperature : -40℃~100Operation Guarantee
Spatial distribution characteristics. (2θ1/2 : 120deg)
Corresponding to a use requiring high reliability in cars etc...
Lead–free soldering compatible
RoHS compliant
Package
Product features
Chromaticity coordinates
Spatial distribution
Die materials
Optical efficiency
Rank grouping parameter
Assembly method
Soldering methods
Taping and reel
ESD
Sorted by luminous intensity and chromaticity per rank taping
Auto pick & place machine (Auto Mounter)
2,000pcs per reel in a 8mm width tape. (Standard)
Reel diameter : φ180mm
1kV (HBM)
120 deg.
PLCC-4 Type, Diffused pale yellow resin
VXW1147BS
x = 0.31TYP., y = 0.32TYP.
(Condition : IF=20mA)
InGaN
22.7lm/W
PLCC-4 Type White LED
2006.10.30
(High Reliability type, White V-Series)
Reflow soldering and manual soldering
Color and Luminous Intensity
Page 2
MIN. TYP. I
F
TYP. I
F
VXW1147BS InGaN White Pale
Yellow 390 680 20 1.5 20
Part No. Material Emitted
Color
Luminous Flux
Iv (mcd) φv (lm)
Lens
Color
Luminous Intensity
VXW1147BS
PLCC-4 Type White LED
2006.10.30
(High Reliability type, White V-Series)
(Ta=25)
Note : The above luminous intensity(Iv) is the setup values of the sorting machine.
(Tolerance : IV±10%)
Page 3
Absolute Maximum Ratings
Power Dissipation P
d
mW
Forward Current I
F
mA
Pulse Forward
Current
1
I
FRM
mA
I
F
mA/
I
FRM
mA/
Reverse Voltage V
R
V
Operating
Tem
p
erature T
opr
-40+100
Storage Temperature T
stg
-40+110
120
30
100
0.50
Absolute Maximum Ratings
Item Symbol Unit
Derating
(Ta=67.5 or higher) 1.67
5
VXW1147BS
PLCC-4 Type White LED
2007.1.11
(High Reliability type, White V-Series)
(Ta=25)
1 IFRM Measurement condition : Pulse Width1ms, Duty1/20
Thermal Characteristics
Item Symbol Ratings Unit
Junction
Temperature
(MAX.)
T
j
110
Thermal Resistance
(TYP.)
(Junction/ ambient)
R
(th j-a)
250 /
Thermal Resistance
(TYP.)
(Junction/ Solder Point)
R
(th j-s)
100 /
Rth(j-a) Measurement Condition / Substrate: FR4(t=1.6mm) Pattern Size: 16mm2.
Electro-Optical Characteristics
Condition
TYP. 3.3
MAX. 4.0
Reverse Current V
R
=5V I
R
MAX. 10 μA
Half Intensity Angle I
F
=20mA 2θ1/2 TYP. 120 deg.
xTYP.0.31-
yTYP.0.32-
CharacteristicsItem Symbol Unit
V
F
V
Chromaticity
Coordinates I
F
=20mA
Forward Voltage I
F
=20mA
Page 4
VXW1147BS
PLCC-4 Type White LED
2006.10.30
(High Reliability type, White V-Series)
(Ta=25)
Luminous Intensity Rank
Page 5
Rank IV(mcd
MIN. MAX.
C8 390 470
C9 470 560
CX 560 680
CY 680 820
CZ 820 1,000
Condition
IF=20mA
Intensity Tolerance each Rank : +/-10%
VXW1147BS
PLCC-4 Type White LED
2006.10.30
(High Reliability type, White V-Series)
(Ta=25)
Please contact our sales staff concerning rank designation.
Sorting Chart for Chromaticity Coordinates
Page 6
Chromaticity Coordinates Tolerance Each Rank : +/-0.01
Rank xyxyxyxy
1 0.280 0.248 0.264 0.267 0.283 0.305 0.296 0.276
2c 0.287 0.295 0.283 0.305 0.304 0.330 0.307 0.315
2d 0.296 0.276 0.287 0.295 0.307 0.315 0.311 0.294
2e 0.307 0.315 0.304 0.330 0.330 0.360 0.330 0.339
2f 0.311 0.294 0.307 0.315 0.330 0.339 0.330 0.318
3 0.330 0.318 0.330 0.360 0.361 0.385 0.356 0.351
LEFT DO WN point LEFT UP point RIGHT UP point RIGHT UP point
VXW1147BS
PLCC-4 Type White LED
Please contact our sales staff concerning rank designation.
2006.10.30
(High Reliability type, White V-Series)
Technical Data
Page 7
VXW1147BS
PLCC-4 Type White LED
2006.10.30
(High Reliability type, White V-Series)
Spatial Distribution Example
Condition : Ta = 25
Spectral Distribution
Relative Intensity vs. Wavelength
Condition : Ta = 25, IF= 20mA
Wavelength [nm]
Relative Intensity
Forward Voltage vs. Forward Current
Condition : Ta = -20℃~85
Forward Voltage VF(V)
Forward Current IF(mA)
Forward Current vs. Relative Intensity
Condition : Ta = 25
Forward Current IF(mA)
Relative Intensity
Ambient Temperature vs. Relative Intensity
Condition : IF= 20mA
Ambient Temperature : Ta()
Derating
Ambient Temperature vs. Maximum Forward Current
Repetition Frequency : f 10Hz
Ambient Temperature : Ta()
Page 8
VXW1147BS
PLCC-4 Type White LED
Technical Data
2006.10.30
(High Reliability type, White V-Series)
Forward Current vs. Chromaticity
Condition : Ta = 25
Maximum Forward Current : IFMAX. (mA)
Ambient Temperature vs. Forward Voltage
Ambient Temperature : Ta()
Forward Voltage VF(V)
Relative Intensity
y
x
Page 9
VXW1147BS
PLCC-4 Type White LED
Technical Data
2006.10.30
(High Reliability type, White V-Series)
Duty Cycle vs. Maximum Forward Current
Duty(%)
Ambient Temperature vs. Chromaticity
Condition : IF= 20mA
x
y
Maximum Forward Current : IFMAX. (mA)
Package Dimensions
Recommended Soldering Pattern
Page 10
(Unit: mm)
Taping Specification
(Unit: mm)
(Unit: mm)
Quantity: 2,000pcs/ reel (standard)
VXW1147BS
PLCC-4 Type White LED
2006.10.30
(High Reliability type, White V-Series)
Weight: (36.5)mg
Reflow Soldering Conditions
1) The above profile temperature gives the maximum temperature of the LED resin surface.
Please set the temperature so as to avoid exceeding this range.
2) Total times of reflow soldering process shall be no more than 2 times.
When the second reflow soldering process is performed, intervals between the first
and second reflow should be short as possible (while allowing some time for the
component to return to room temperature after the first reflow) in order to prevent the
LED resin from absorbing moisture.
3) Temperature fluctuation to the LED during the pre-heating process shall be minimized.
(6maximum)
Page11
VXW1147BS
PLCC-4 Type White LED
2006.10.30
(High Reliability type, White V-Series)
Manual Soldering Conditions
Iron tip temp.
Soldering time and frequency 3 s
1 time
350
(MAX.)
(MAX.)
(MAX.)
Reliability Testing Result
Page12
Failure Criteria
Reliabilit y Te st ing
Result Applicable S tandard T esting Condit ions Duration Failure
Room T emp.
O per ating Lif e EIAJ ED-
4701/100(101) Ta = 25, I
F
= 30mA 1,000 h 0/20
High T emp.
O per ating Lif e EIAJ ED-
4701/100(101) Ta = 85 ,I
F
= 20mA 1,000 h 0/20
Low T emp.
O per ating Lif e EIAJ ED-
4701/100(101) Ta = -40, I
F
= 30mA 1,000 h 0/20
W et High T emp.
O per ating Lif e EIAJ ED-
4701/100(102) Ta = 60, 90%, I
F
= 30mA 1,000 h 0/20
W et High T emp.
Storage Life EIAJ ED-
4701/100(103) Ta = 60, 90% 1,000 h 0/20
T her mal S hoc k EIAJ ED-
4701/100(105) Ta = -40 110 (each 15min.) 1,000 cycles 0/20
High T emp.
Storage Life EIAJ ED-
4701/200(201) Ta = 1101,000 h 0/20
Low T emp.
Storage Life EIAJ ED-
4701/200(202) Ta = -401,000 h 0/20
Cyc led Temp.
Humidity Life EIAJ ED-
4701/200(203) Ta = -10 60, 95%, 24h/cycle 10 cycles 0/20
R esi stan ce to
Ref low S olde r ing EIAJ ED-
4701/300(301)
Moisture Soak : 30, 70%, 72h
Preheat : 150℃~180 (120s Max.)
Soldering Temp. : 260 (5s)
2 t imes 0/20
Electric Static
Dischar
g
e
(
ESD
)
1
EIAJ ED-
4701/300(304) C = 100pF, R2 = 1.5KΩ, ±2,000V once eac h po lar ity 0/20
Vibration,
Var iable Frequ enc y EIAJ ED-
4701/400(403)
98.1m/s
2
(10G), 100 2KHz, 20min.
XYZ each direction 2 h 0/20
Items Symbols Conditions Failure criteria
Luminous Intensity Iv I
F
=20mA Testing Min. Value Spec. Min. Value x 0.5
Forward Voltage V
F
I
F
=20mA Testing Max. Value Spec. Max. Value x 1.2
Reverse Current I
R
V
R
=5V Testing Max. Value Spec. Max. Value x 2.5
Cosmetic Appearance - - No notable, decoloration, deformation and cracking
VXW1147BS
PLCC-4 Type White LED
1 Reference test
2006.10.30
(High Reliability type, White V-Series)
Special Notice to Customers Using the Products and
Technical Information Shown in This Data Sheet
Page13
1) The technical information shown in the data sheets are limited to the typical characteristics and circuit
examples of the referenced products. It does not constitute the warranting of industrial property nor the
granting of any license.
2) For the purpose of product improvement, the specifications, characteristics and technical data described in
the data sheets are subject to change without prior notice. Therefore it is recommended that the most
updated specifications be used in your design.
3) When using the products described in the data sheets, please adhere to the maximum ratings for operating
voltage, heat dissipation characteristics, and other precautions for use. We are not responsible for any
damage which may occur if these specifications are exceeded.
4) The products described in the data sheets are made to be used in standard electronic applications such as
office automation appliances, communication devices, audio visual, home appliances, and measuring
instruments.
5) If the products in the data sheets are to be used for purposes other than the above which requires high level
reliability and safety where failure and or malfunction of the product may cause death or other serious effects
on the human body such as airplane, space activity, transportation, medical, nuclear), please contact our sales
personnel.
6) In order to export the products or technologies described in this data sheet which are under the “Foreign
Exchange and Foreign Trade Control Law,” it is necessary to first obtain an export permit from the Japanese
government.
7) No part of this data sheet may be reprinted or reproduced without prior written permission from Stanley
Electric Co., Ltd.
8) The most updated edition of this data sheet can be obtained from the address below:
http://www.stanley-components.com
VXW1147BS
PLCC-4 Type White LED
2006.10.30
(High Reliability type, White V-Series)