mil-c 26482g Series II Description Applications * Standard version * Aluminum alloy olive green, nickel or, black, anodized plating * Bayonet coupling * RFI shielding plug * Gold plating crimp contacts # 20, 16, and # 12 * # 16 and # 12 minicoaxial or thermocouple contacts * Hermetic version available * Light weight backshells For all general purposes in military applications Standards MIL-C 26482 Series II QPL approved Characteristics Climatical Electrical * Max. current rating per contact Mechanical * Endurance : 500 operations * Plug MS 3475 : 250 operations * Plug MS 3476 : 500 operations * Shock : 300 g - 3 ms in three axes * Vibration : MIL STD 202, method 214, test condition II, letter J (50 - 2000Hz; 41,7 g eff.) * Contact retention in insert : - size 20 : 90 N - size 16 : 111 N - size 12 : 133 N size 20 size 16 size 12 environmental class 7,5 A 13 A 23 A hermetic class 5A 10 A 17 A * Contact resistance size 20 size 16 size 12 environmental class 1 m 0,55 m 0,35 m hermetic class 7 m 3,8 m 2,4 m * Insulation resistance : 5000 M at 500 Vdc * Dielectric withstanding voltage Service at ground level at 21000 m Ordering information I 1500 Vrms 375 Vrms II 2300 Vrms 550 Vrms * Shell continuity with plug MS 3475, environmental receptacle 5 m, hermetic receptacle 50 m * Operating temperature : -55C to + 200C (class L) -55C to + 175C (classes W and H) * Damp heat : MIL STD 1344 method 1002 - Type II * Salt spray : class W : 500 hr class L : 48 hr * Leakage : environmental version : - when mated under a differential pressure of 1,03 bar. air leakage is 3,6 mm3/h - low pressure immersion : 33 mbar hermetic version : - differential pressure of 1 bar air'helium, leakage is 2,8 mm3/h Resistance to fluids MIL-L 7808 MIL-L 23699 MIL-H 5606 Hydraulic fluids M 2 V MIL-C 25769 diluted MIL-A 8243 MIL-T 5624 (JP5) MIL-G 3056 Solvents environmental connectors MS basic series shell type 3470 3474 3475 3476 - square flange receptacle - jam nut receptacle - RFI shielded plug - plug class and plating W - olive green cadmium L - nickel shell size 8-10-12-14-16-18-20-22-24 contact layout contact type polarization - see table p 59 P S A B - male contact female contact less male contact less female contact N - normal ( not included in part number) W, X, Y and Z - see table p 60 102 3470 W ** ** P * mil-c 26482g Series II Hermetic connectors MS basic series shell type 3440 H ** C ** P * 3440 - square flange receptacle 3443 - solder fixing receptacle 3449 - jam nut receptacle class H - hermetic shell size 8-10-12-14-16-18-20-22-24 materials and terminal C - steel, solder bucket contact layout see table p 59 contact type male only polarization N - normal (not included in part number) W, X, Y and Z - see table p 60 Backshells Backshell type A Plating W N * Backnut * * Straight cable clamp * * * Elbow cable clamp * * * Straight backshell for heatshrink sleeving * * * Backnut for heatshrink sleeving * * * A - black anodized Example : M85049-31-8A 852-31A08 MIL-C 26482G Series II SOURIAU M85049-31-**A M85049-31-**W M85049-52-1**A M85049-52-1**W M85049-51-1**A M85049-51-1**W M85049-60-1A** M85049-60-1W** - 852-31A** 852-31W** 852-31N** 852-52A** 852-52W** 852-52N** 852-51A** 852-51W** 852-51N** 852-60A** 852-60W** 852-60N** 852-57A** 852-57W** 852-57N** W - olive green cadmium N - nickel shell size Cross reference list Part number cross reference list SOURIAU and MIL-C 26482G Series II MIL-C 26482G Series II SOURIAU MS3470 W**-** P MS3470 W**-** A MS3470 W**-** S MS3470 W**-** B MS3474 W**-** P MS3474 W**-** A MS3474 W**-** S MS3474 W**-** B MS3475 W**-** P 8526-0W**-** P 8526-0W**-** P 8526-0W**-** S 8526-0W**-** S 8526-7W**-** P 8526-7W**-** P 8526-7W**-** S 8526-7W**-** S 8526-5W**-** P Designation L L L L square flange receptacle with male contacts square flange receptacle less male contacts square flange receptacle with female contacts square flange receptacle less female contacts jam nut receptacle with male contacts jam nut receptacle less male contacts jam nut receptacle with female contacts jam nut receptacle less female contacts BFI shielded plug with male contacts 103 mil-c 26482g Series II MIL-C 26482G Series II FCI Souriau MS3475 W **-** A MS3475 W **-** S MS3475 W **-** B MS3476 W **-** P MS3476 W **-** A MS3476 W **-** S MS3476 W **-** B MS3470 L **-** P MS3470 L **-** A MS3470 L **-** S MS3470 L **-** B MS3474 L **-** P MS3474 L **-** A MS3474 L **-** S MS3474 L **-** B MS3475 L **-** P MS3475 L **-** A MS3475 L **-** S MS3475 L **-** B MS3476 L **-** P MS3476 L **-** A MS3476 L **-** S MS3476 L **-** B 8526-5W **-** P 8526-5W **-** S 8526-5W **-** S 8526-6W **-** P 8526-6W **-** P 8526-6W **-** S 8526-6W **-** S 8526-0L **-** P 8526-0L **-** P 8526-0L **-** S 8526-0L **-** S 8526-7L **-** P 8526-7L **-** P 8526-7L **-** S 8526-7L **-** S 8526-5L **-** P 8526-5L **-** P 8526-5L **-** S 8526-5L **-** S 8526-6L **-** P 8526-6L **-** P 8526-6L **-** S 8526-6L **-** S MS3440 H ** C ** P MS3443 H ** C ** P MS3449 H ** C ** P 8526-2H **-** P 8526-1H **-** P 8526-7H **-** P hermetic square flange receptacle hermetic solder fixing receptacle hermetic jam nut receptacle M85049/31- ** W M85049/52-1- ** W M85049/51-1- ** W M85049/60-1W- ** M85049/60-2G- ** A M85049/31- ** A M85049/52-1- ** A M85049/51-1- ** A M85049/60-1A ** M85049/60-2G- ** A M85049/31- ** N M85049/52-1- ** N M85049/51-1- **N M85049/60-1N ** M85049/60-2G- ** N 852-31W ** 852-52W ** 852-51W ** 852-60W ** *852-57W ** 852-31A ** 852-52A ** 852-51A ** 852-60A ** *852-57A ** *852-31N ** *852-52N ** *852-51N ** *852-60N ** *852-57N ** backnut straight cable clamp elbow cable clamp backshell for heatshrink sleeving backnut for heatshrink sleeving backnut straight cable clamp elbow cable clamp backshell for heatshrink sleeving backnut for heatshrink sleeving backnut straight cable clamp elbow cable clamp backshell for heatshrink sleeving backnut for heatshrink sleeving M39029/4-110 M39029/4-111 M39029/4-113 M39029/5-115 M39029/5-116 8522-486A 900 M39029/5-118 8522-487B 900 M39029/9-135 *8522-875A M39029/9-134 *8522-876A M39029/10-141 *8522-877A 900 M39029/10-140 *8522-878B 900 M39029/9-129 *8526-12-1-001 M39029/7-126 *8526-12-2-001 MS27488-20 MS27488-16 MS27488-12 M81969-14-02 M81696-14-03 M81696-14-04 104 8522-389A 8522-390A 8522-391A 8522-20 8522-16 8522-12 Designation L L L L L L L L L L L L RFI shielded plug less male contacts RFI shielded plug with female contacts RFI shielded plug less female contacts plug with male contact plug less male contact plug with female contact plug less female contact square flange receptacle with male contacts square flange receptacle less male contacts square flange receptacle with female contacts square flange receptacle less female contacts jam nut receptacle with male contacts jam nut receptacle less male contacts jam nut receptacle with female contacts jam nut receptacle less female contacts RFI shielded plug with male contacts RFI shielded plug less male contacts RFI shielded plug with female contacts RFI shielded plug less male contacts plug with male contact plug less male contact plug with female contact plug with less female contact male contact 20 male contact 16 male contact 12 female contact 20 female contact 16 female contact 12 thermocouple contacts male-chromel 20 male-alumel 20 female-chromel 20 female-alumel 20 coax contacts 12 female for RG178B/U cable male for RG178B/U cable filler plug 20 filler plug 16 filler plug 12 plastic tool for contact 20 plastic tool for contact 16 plastic tool for contact 12 mil-c 26482g Series II Contacts layouts viewed from front face of male insulator Shells 08 10 12 14 16 18 20 22 24 8-33* 10-6* 12-10* 14-19* 16-26* 18-32* 20-41* 22-55* 24-61* 3 # 20 6 # 20 10 # 20 19 # 20 26 # 20 32 # 20 41 # 20 55 # 20 61 # 20 8-98* 12-3* 14-15* 16-8* 18-11 20-39* 22-41* 24-31 3 # 20 3 # 16 14 # 20 1 # 16 8 # 16 11 # 16 37 # 20 2 # 16 27 # 20 14 # 16 31 # 16 14-12* 18-8* 20-16* 22-21* 24-19 8 # 20 4 # 16 8 # 12 16 # 16 21 # 16 19 # 12 14-5* 22-12 5 16 12 # 12 14-4* * hermetic receptacle available not QPL to date 4 # 12 105 mil-c 26482g Series II Polarization shell size Insulator rotated inside metal body 8 10 12 N 14 16 Z W 18 Y 20 22 X 24 contacts layouts O1 O1,6 O2,4 8-33 X 3 8-98 X 3 10-6 X 6 12-10 X 10 12-3 X 3 14-19 X 19 14-15 X 14 1 14-12 X 8 4 14-5 X 5 14-4 X 4 16-26 X 26 16-8 X 8 18-32 X 32 18-11 X 11 18-8 X 8 20-41 X 41 20-39 X 37 2 20-16 X 16 22-55 X 55 22-41 X 27 14 22-21 X 21 22-12 X 12 24-61 X 61 24-31 X 31 24-19 X 19 Contacts Contacts size number of contacts service I service II size 20 size 16 size 12 N 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 angles in degrees W X Y 90 90 60 30 17 43 40 45 60 54 85 62 180 45 63 238 30 39 16 90 90 30 155 165 110 90 92 152 138 119 126 144 318 142 135 135 180 225 165 270 180 315 155 184 275 180 222 241 225 252 333 226 264 175 270 255 315 Z 295 234 273 338 331 265 340 333 347 314 349 324 - Minicoax contacts installed instead of size 16 contacts 20 (O1mm) 16 (O1.6mm) 12 (O2.4mm) male contacts Cable accommodation (admissible section) external O over insulator 0,98/2,11 mm 1,34/2,62 mm 2,45/4,01 mm admissible section 0,21/0,60 mm2 0,60/1,34mm2 1,91/3,18mm2 24/20 20/16 14/12 0,09/0,21 mm2 - - 28/24 - - wire gauge reducting sleeve for wire of M39029/4-110 M39029/4-111 colour code brown-brown-black brown-brown-brown brown-brown-orange M39029/5-115 M39029/5-116 M39029/5-118 brown-brown-green brown-brown-blue brown-brown-grey 8522-875 A 8522-881 8522-887 brown-orange-green yellow yellow 8522-876 A 8522-882 8522-888 brown-orange-yellow black black 8522-877 A 8522-883 8522-889 brown-yellow-brown yellow yellow 8522-878 A 8522-884 8522-890 brown-yellow-black black black - male contacts chromel thermocouple colour code - alumel thermocouple colour code colour code - alumel thermocouple colour code reducing sleeve 106 8526-1-001 A 8526-1-002 A 8526-1-003 A cables accepted RG-316U-KX 22 A RG-178 B/U-KX 21 A RG 179 B/U Coax contacts installed instead of size 12 contacts male contacts 8526-12-2-001 8526-12-2-002 8526-12-2-003 8526-12-2-004 female contacts - female contacts chromel thermocouple 8526-2-003 A M39029/4-113 - male contacts colour code 8526-2-002 A female contacts part numbers - female contacts 8526-2-001 A 8522-2142 8526-12-1-001 8526-12-1-002 8526-12-1-003 8526-12-1-004 cables accepted RG 178 B/U RG 179 B/U RG 316 U RG 180 B/U mil-c 26482g Series II Dimensions backnut type 31 OC Backshells OB Plug MS3475 and MS3476 12,85 Max D Plug backshell assembly overall length OA 10 22.65 18.6 .732 .370 12 25.75 21.75 12.8 .504 1.014 .856 14 29.75 24.95 14.75 .581 36.5 16 32.95 28.2 17.93 18 35.35 20 38.75 34.15 23.11 22 41.85 37.25 26.29 24 45.05 40.45 1.593 1.150 1.437 J Max K min K Max shells 08 10 .892 1.014 1.171 1.297 1.392 1.526 1.648 1.774 20.5 24 1.467 3.2 5.2 10.6 .291 22.65 36.5 4.75 7.25 21.1 24.45 47.59 .963 2.669 7.4 10.6 .504 1.437 25.1 27.85 51.3 1.437 8.9 .350 12.1 .476 26.6 1.047 27.85 51.3 36.5 12.75 15.9 33.5 30.85 36.5 13.15 17.9 36.9 37.85 36.5 14.75 21.1 39.5 40.45 36.5 16.35 24.3 42 44.35 36.5 17.95 .707 1.083 1.776 45.1 46.75 L Max M Max N mini O Max P Q Max 52.2 6.75 13.5 3.3 10.6 3.3 10.6 3.3 10.6 3.3 10.6 1.437 29.2 7.4 .929 19.1 1.437 1.035 7.25 .185 5.2 1.437 .910 4.75 .205 1.437 .785 22 .866 25.2 22 1.344 .126 .187 36.5 30.9 19.94 1.217 3.2 27.6 1.087 29.3 .285 1.154 31.9 .417 H Max 1.437 1.437 .706 .205 14 20 1.110 .126 23.6 18 .982 9.4 .807 12 16 .856 36.5 .266 G Max 1.256 .502 .626 .518 .705 .581 .831 .644 .957 27.5 2.055 .266 53.9 .831 1.319 1.453 1.555 1.654 .531 2.122 .370 9.4 15.35 56.5 12.8 19.65 58 14.75 21.25 2.224 .504 .604 .774 .892 .291 1.096 1.215 1.490 1.593 1.746 1.841 .130 .130 .130 46.1 1.815 .417 60.8 63.9 2.516 67.8 2.669 70.2 2.764 .417 .417 26.8 12.75 15.9 .626 1.469 2.437 61.9 17.93 24.45 .963 .130 3.3 10.6 31.3 13.15 17.9 .705 38.7 1.524 63.3 2.492 19.94 26.45 1.041 3.3 .130 10.6 32.9 14.75 21.1 40.25 1.585 64.9 2.555 23.11 .910 30.9 1.217 3.3 .130 10.6 34.5 16.35 24.3 .957 41.9 1.650 66.5 2.618 26.29 1.035 34.4 1.354 3.3 .130 10.6 36.1 17.95 27.5 43.5 68.1 29.2 36.65 3.3 10.6 W Max X Max Y Max 3.3 10.5 37.4 3.3 10.5 3.3 10.5 3.3 10.5 3.3 10.5 3.3 10.5 1.232 1.295 1.358 1.421 .502 .518 .581 .644 .707 .831 37.3 1.083 1.713 2.681 .581 .706 .785 1.150 1.443 .130 .130 .417 .417 08 28.55 52 13.72 6.75 17.48 10 28.55 52 13.72 .540 .370 9.4 20.4 12 28.55 52 13.72 12.8 23.83 14 28.55 52 13.72 14.75 .581 1.063 16 28.55 52 13.72 17.93 31.45 18 28.55 52 13.72 19.94 33.27 20 28.55 52 13.72 23.11 36.47 1.436 .130 3.3 10.5 22 28.55 1.124 2.047 52 13.72 26.29 39.62 3.30 10.5 .413 1.472 24 28.55 52 13.72 29.2 42.82 3.3 10.5 37.4 1.124 1.124 1.124 1.124 1.124 1.124 1.124 2.047 2.047 2.047 2.047 2.047 2.047 2.047 .540 .540 .540 .540 .540 .540 .540 .266 .504 .706 .785 .910 1.035 1.150 .688 .803 .938 27 1.238 1.310 1.560 1.686 .130 .130 .130 .130 .130 .130 .130 .130 .413 .413 .413 .413 .413 .413 .413 .413 R .417 U Max .540 M .417 T Max 2.047 L .417 S Max 1.124 O for flange OK .417 R Max shells V .837 elbow cable clamp type 51-1 .417 12.1 2.283 H 2.394 8.9 1.315 G 54.3 2.138 .350 .476 Straight cable clamp type 52-1 2.394 .992 1.055 33.4 .285 .752 for heatshrink sleeving type 60-1 P Q S 1.472 37.4 1.472 37.4 T 1.472 37.4 1.472 37.4 1.472 37.4 1.472 37.4 1.472 37.4 backnut for heatshrink sleeving type 60-2 OV 6.75 F Max F 15.65 E Max OE 18.95 .616 E min J 08 .746 D Max ON C OO B Max OU A shells O for flange D, H, M, S et Y W Y X 1.472 107 mil-c 26482g Series II Environmental square flange receptacle MS3470 1,55 Max E A B C D E Max Max Max Max Max shells OA 08 E O G F mounted from rear of panel 1.95 11.7 .461 36.5 1.437 19.07 1.95 11.7 22.25 1.95 .461 25.42 1.95 11.7 .461 28.6 1.95 11.7 .077 .077 .077 .077 1.126 20 .077 H 21 15.09 14.43 3.17 2.21 17.4 3.05 3.17 2.21 .461 36.5 1.437 26.55 20.62 21.95 3.05 3.17 2.21 11.7 36.5 1.437 28.9 23.01 25.12 1.138 3.05 3.17 2.21 36.5 1.437 31.3 24.61 28.27 1.232 3.05 3.17 2.21 36.5 33.7 26.97 31.45 3.05 3.17 2.21 3.05 3.17 5.38 .594 .568 24.2 18.26 .953 .719 1.045 .812 1.327 .565 1.500 36.9 29.36 34.62 34.95 2.75 14.35 .108 .565 38.1 38.12 2.75 15.2 1.501 .108 .598 .125 .120 1.238 .125 .120 .125 .087 .087 .087 .087 1.363 1.500 1.575 37.8 3.05 3.17 5.38 38.1 43.3 34.92 41.02 3.73 3.17 5.38 1.705 1.375 1.488 .125 .087 1.156 1.250 .120 .087 40 31.75 1.500 1.453 1.062 .125 .120 1.113 38.1 .125 .120 .989 1.437 .125 .120 .864 .906 .969 .120 .685 .461 .108 J K Max Max 3.05 .827 2.75 14.35 1.376 24 36.5 G 31.77 1.251 22 OH 15.01 1.001 18 K J mounted from front of panel 1.437 .876 16 F .461 .751 14 panel cut-out 11.7 .077 .591 12 with backnut D 1.95 .474 10 C 12.03 F .120 1.615 .125 .147 .125 .212 .212 .212 Environmental jam nut receptacle MS3474 OF C D with backnut panel cut-out O G J H A Max B Max C Max 8 12.03 2.51 17.55 .691 1.437 10 15.01 2.51 17.55 .691 1.437 12 19.07 2.51 17.55 .691 36.5 1.437 14 22.25 2.51 17.55 16 25.42 2.51 18 28.6 2.51 .691 1.437 1.760 20 31.77 1.251 3.3 .130 19.15 .754 38.1 1.500 46.25 49.45 1.821 1.947 22 34.95 1.376 3.3 .130 19.15 .754 38.1 1.500 49.45 24 38.12 3.3 19.15 38.1 shells E OA B .474 .591 .751 .876 1.001 1.126 .099 .099 .099 .099 .099 1.501 .099 .130 F Max G H J Max 27.2 14.53 13.61 4.75 30.4 17.7 16.79 4.75 32 35.15 22.73 20.93 4.75 .691 36.5 1.437 35.15 38.35 1.384 1.510 25.65 24.08 4.75 17.55 .691 36.5 1.437 38.35 1.510 41.5 1.634 28.83 27.23 4.75 17.55 36.5 41.5 44.7 32 1.260 30.4 1.197 4.75 35.18 33.58 6.35 1.947 52.6 2.071 38.35 36.75 6.35 52.6 55.8 41.53 39.93 5.55 .754 D Max E Max 36.5 24.05 .947 1.071 36.5 27.2 1.071 1.260 1.634 1.500 2.071 1.197 1.384 2.197 .572 .536 .697 .661 .895 .824 1.010 .948 1.135 1.072 1.385 1.322 1.510 1.447 1.635 1.572 .187 .187 .187 .187 .187 .187 .250 .250 .219 Square flange hermetic receptacle MS3440 B shells C max G O H L G - 15.05 1.95 15 19.8 4.5 - 15.05 1.95 12 19.05 19.8 4.5 14 22.25 19.8 4.5 25.4 19.8 4.5 28.6 19.8 4.5 20 31.75 20.95 4.5 22 F OA F panel cut-out OJ 108 4.5 10 E K D E F Max Max Max 12.05 19.8 8 D A B C Max Max Max # 20 ## 12 16 .474 .591 .750 .876 16 1.000 18 1.126 24 .780 .177 .780 .177 .780 .177 .780 .177 .780 .177 .593 .593 .593 .593 34.95 21.8 3.7 5.45 16.6 38.1 21.8 3.7 5.45 16.6 1.500 .858 .146 .077 .077 6.3 15.05 1.95 16.6 .858 .146 .077 6.3 15.05 1.95 .248 6.3 1.376 .077 J 21 15.1 14.7 3.15 .827 .594 .612 .124 24.2 18.26 17.5 3.15 .953 .719 .740 .124 1.045 .812 .872 .124 6.3 15.05 1.95 28.95 23.01 23.4 3.15 .248 .593 .825 .181 .077 H 6.3 15.05 1.95 26.55 20.62 20.2 3.15 .248 .248 1.250 .780 .177 .593 G .248 .219 .219 .654 .654 .654 .077 2.4 .094 2.4 .094 1.140 .906 .996 31.3 24.61 26.6 3.15 1.232 .969 1.120 .124 33.7 26.97 28.8 3.15 1.327 1.062 1.246 .124 36.9 29.36 32.1 3.15 1.453 1.156 1.370 .124 40.1 31.75 35.3 3.15 1.579 1.250 1.496 2.4 43.25 34.92 38.4 .094 .124 1.703 1.375 1.622 .124 3.3 .130 K L Max Max 3.2 .126 3.2 .126 3.2 .126 3.2 .126 3.2 .126 3.2 .126 3.2 .126 3.2 .126 3.2 .126 3 .118 3 .118 3 .118 3 .118 3 .118 3 .118 5.4 .213 5.4 .213 5.4 .213 mil-c 26482g Series II Jam nut hermetic receptacle MS3449 B C max # 20 12.05 20.73 3.4 15 20.73 3.4 12 19.05 20.73 3.4 14 22.25 20.73 3.4 16 25.4 20.73 3.4 28.6 20.73 3.4 20 31.75 23.08 2.5 22 34.95 23.08 2.5 E OA 8 OF panel cut-out G J H min Max 24.2 27.34 14.6 13.75 1.57 4.75 - - 17.91 27.34 30.52 17.75 16.95 1.57 4.75 5.2 17.91 32.12 35.29 22.5 20.99 1.57 4.75 5.2 17.91 35.29 38.47 25.7 24.2 1.57 4.75 5.2 17.91 38.47 41.64 28.85 27.35 1.57 4.75 5.2 17.91 41.64 44.82 32.05 30.55 1.57 4.75 4.3 19.5 46.39 49.59 35.2 33.7 1.57 6.35 .909 .098 4.3 .169 19.5 49.59 52.74 38.4 36.9 1.57 6.35 38.1 23.83 1.75 3.55 19.5 52.74 55.92 41.55 40.05 1.57 6.35 .750 .876 1.000 1.126 1.250 24 D E F Max Max Max 17.91 .591 18 O G OA J # 12 # 16 - - .474 10 D C Max A B Max Max shells 1.376 1.500 .816 .134 .816 .134 .816 .134 .816 .134 .816 .134 .816 .134 .909 .098 .938 .069 .705 .953 .705 1.076 .205 .205 .205 .205 .169 .140 .705 1.265 .705 1.389 .705 1.515 .705 1.639 .768 1.826 .768 1.952 .768 2.076 1.076 1.202 1.389 .575 .699 .886 1.515 1.012 1.639 1.136 1.765 1.262 1.952 1.386 2.076 1.512 2.202 1.636 .541 .062 .667 .187 .062 .846 .187 .062 .953 .187 .062 1.077 .187 .062 1.203 .187 .062 1.327 .187 .062 1.453 .250 .062 1.577 .250 .062 .250 Solder mounted hermetic receptacle MS3443 B C B Max 12.05 19.5 .768 .177 4.5 - - 15.1 .594 .043 15 19.5 .177 4.5 - - .594 15.1 12 19.05 19.5 .768 4.5 .177 6.3 .248 14 22.25 19.5 .768 4.5 16 25.4 19.5 .768 28.6 19.5 .768 20 31.75 21.1 .831 22 34.95 1.376 22 .866 24 38.1 22 G OA 8 10 .591 D E OF panel cut-out O H soldering C A Max shells 18 .474 .768 .750 .876 1.000 1.126 1.250 1.500 .866 E Max F Max G H 1.1 16.1 14.27 14.48 .043 1.1 .760 19.3 17.06 17.27 15.1 .594 1.1 .043 21.65 19.83 20.04 .177 6.3 .248 15.1 .594 1.1 .043 24.85 23.01 23.22 4.5 .177 6.3 .248 15.1 .594 1.1 .043 28 1.102 26.18 26.39 4.5 .177 6.3 .248 15.1 .594 1.1 .043 31.15 29.36 29.57 4.5 .177 6.3 .248 16.7 .657 1.1 .043 33.55 31.74 31.95 3.7 .146 5.5 .217 16.7 .657 1.1 .043 36.75 34.92 35.13 3.7 5.5 16.7 1.1 39.95 38.09 # 20 .146 # 16 # 12 .217 D Max .657 .043 .634 .672 .852 .978 1.226 1.321 1.447 1.573 .562 .680 .781 .906 1.031 1.156 1.250 1.375 1.500 .570 .789 .914 1.039 1.164 1.258 1.383 38.3 1.508 Reusable fixing plate gaskets Two, three or four holes self locking fixing plates are available at SHTP. See page 759. shells gaskets square flange receptacle MS3470 and MS3440 (ordered separately) 0-ring jam nut receptacle MS3474 and MS3449 (spare 0-rings) 8 8525-1431 MS9068-016 10 8525-1432 MS9068-018 12 8525-1433 MS9068-021 14 8525-1434 MS9068-023 16 8525-1435 MS9068-025 18 8525-1436 MS9068-027 20 8525-1437 MS9068-029 22 8525-1438 MS9068-030 24 8525-1439 MS9068-031 109 mil-c 26482g Series II Protective caps shell size basic series 08-10-12-14-16-18-20-22-24 cap type 852 28 W - olive green cadmium N - nickel R - black anodized Caps for receptacle Type 27 OD OA OC OA Type 29 L1 L1 B B Caps for plug OE Type 28 OD L2 F Dummy receptacle Shells A Max 19 8 .748 21.8 10 .858 26.1 12 1.028 B Max C Max 14.25 14.8 D 3.5 .583 .138 .661 .591 3.307 18 3.5 19.8 15 84 3.5 23.9 .561 .709 14.25 22.7 29.3 14 1.154 32.5 16 1.28 35.3 18 1.39 14.25 25.9 38.8 20 1.528 42 22 1.654 45.1 24 1.776 14.25 .561 .561 15 .591 15 .591 .561 15 .591 15.8 .622 .138 .894 .138 1.02 .138 29 1.142 32.2 1.268 35.4 1.394 38.6 1.520 41.7 1.642 8 8526-0708 8526-07N08 D E OA 14 8526-0714 8526-07N14 16 8526-0716 8526-07N16 C E D Light weight and special backshells plating 110 18 8526-0718 8526-07N18 20 8526-0720 8526-07N20 22 8526-0722 8526-07N22 24 8526-0724 8526-07N24 08-10-12-14-16-18-20-22-24 02 - straight cable clamp 03 - elbow cable clamp 32 - backshell with shield termination and heatshrink sleeving W - olive green cadmium N - nickel R - black anodized L1 84 .561 3.5 3.5 .138 3.5 .138 3.5 .138 3.5 .138 3.5 .138 .78 .591 3.307 15 100 L2 84 3.307 84 3.307 100 .941 .591 3.937 3.937 1.063 .591 3.937 3.937 27 30.2 1.189 33.4 15 15 36.5 16.5 39.8 16.5 42.9 16.5 1.689 3.937 15 .591 1.567 100 .591 1.315 1.437 100 100 3.937 116 .65 4.567 116 .65 4.567 100 100 3.937 100 3.937 116 4.567 116 4.567 116 .65 116 4.567 4.567 A Max B Max C D Max E F 12.03 11.7 1.35 21 15.09 3.1 .474 15.01 10 8526-0710 8526-07N10 .591 19.07 12 8526-0712 8526-07N12 .751 B E Max F Max 16.8 15 14.25 Part number Shells olive green nickel 4OF cap type 10 28 - cap for plug 27 - cap for square flange receptacle 29 - cap for jam nut receptacle plating shell size basic series R .461 .053 .827 .594 .122 .461 .053 .953 .719 .122 11.7 1.35 24.2 18.26 3.1 11.7 1.35 26.55 20.62 3.1 .461 .053 1.045 .812 .122 .461 .053 1.142 .906 .122 22.25 11.7 1.35 25.42 11.7 1.35 31.3 24.61 3.1 .876 1.001 28.6 1.126 .461 29 23.01 3.1 .053 1.232 .969 .122 11.7 1.35 33.7 26.97 .461 3.1 .053 1.327 1.062 .122 31.77 14.35 2.15 36.9 29.36 3.1 1.251 .565 .085 1.453 1.156 .122 34.95 14.35 2.15 1.376 38.12 1.501 852 .565 40 31.75 3.1 .085 1.575 1.250 .122 15.2 2.15 43.3 34.92 3.75 .598 02 .085 1.705 1.375 .148 W 10 mil-c 26482g Series II Elbow cable clamp type 03 Backshell with shield termination and heatshrink sleeving type 32 OH D K OE F A Shells 8 10 12 14 16 18 20 22 24 A Max B 22.25 mini 4 22.25 6.85 22.25 10.15 .400 .472 27.45 11.7 16.75 27.45 15.5 20.55 27.45 17.5 22.55 27.45 20.7 25.75 27.45 23.9 28.95 27 32.05 .876 .876 .876 1.081 1.081 1.081 1.081 1.081 27.45 1.081 .157 .27 .461 .610 .689 .815 .941 1.063 OJ G C OB O for flange Straight cable clamp type 02 Max 5.85 C Max D Max .752 .787 20 mini 4 8.7 20.3 22.2 6.85 12 23.5 .230 .343 .659 .809 .888 1.014 1.140 1.262 19.1 .799 .874 .157 .27 E Max 5.85 .230 8.7 .343 25 .984 27.9 1.098 .945 24 10.15 .400 .472 25.5 24.5 11.7 16.75 27 15.5 20.55 28.6 17.5 22.55 .888 1.516 30.1 20.7 25.75 41.80 31.9 23.9 28.95 27 32.05 29.5 1.161 32.3 1.272 36 1.417 39 1.535 42.7 1.681 .965 1.063 1.126 1.185 1.256 33.4 1.315 .461 .610 .689 .815 .941 1.063 12 F Max .925 1.004 L O for flange .659 .809 1.014 1.140 1.262 31.2 1.228 32.8 1.291 36.5 1.437 38.5 1.646 45 1.772 48 1.890 G Max 29 1.142 29 1.142 29 1.142 29 H Max 7.5 18.2 9.7 19.2 13 24.2 .295 .382 .512 15 1.142 .591 29 18.3 1.142 29.3 .720 21 1.154 .827 29.3 23.5 1.154 29.3 1.154 29.3 1.154 J Max .925 26.5 1.043 30 1.181 .717 .756 .953 27.2 1.071 30.2 1.189 33.2 1.307 36.3 1.429 39.5 1.555 42.6 1.677 K Max 3.7 .146 3.7 .146 3.7 .146 3.7 .146 3.7 .146 3.7 .146 3.7 .146 3.7 .146 3.7 .146 L Max 15 .591 15 .591 15 .591 15 .591 15 .591 15 .591 15 .591 15 .591 15 .591 111 mil-c 26482g Series II Male - Female Saver Ordering information SN 1206- QQ- QQ- SQ basic series shell size -Q -Q -Q 08-10-12-14-16-18-20-22-24 contact layout standard # 20 contact layout contact type Pin / Socket (socket on locking ring side) plating W - olive green N - black shielding B - with O - without blocking system B - heatshrink sleeve F - floating ring Q - without Dimensions Shell size D Max. G 0.1 8 0 H -0.5 F 0 -0.83 Contact A Polarization layoutsMax 3A , 33 N, W OB Max. OA Max. OC Max. E D I E F G H Max Max 19.03 12.03 9.09 33.90 2.68 8.38 9.10 9.06 21.70 21.83 15.01 12.34 33.90 2.68 8.38 9.10 9.06 24.50 .749 .474 .358 1.335 .106 .330 .358 .357 .854 6 12 10 N, W, X, Y, Z 26.13 19.07 15.19 33.90 2.68 8.38 9.10 9.06 28.80 14 19 N, W, X, Y 29.33 22.25 18.36 33.90 2.68 8.38 9.10 9.06 32.00 16 26 N, W, X, Y, Z 32.53 25.42 21.54 33.90 2.68 8.38 9.10 9.06 35.20 32 N, W, X, Y, Z 35.33 28.60 24.08 33.90 2.68 8.38 9.10 9.06 38.00 41 N, W, X, Y 38.83 31.77 27.25 35.50 4.28 9.98 10.70 10.64 41.50 55 N, W, X, Y, Z 42.03 34.95 30.43 35.50 4.28 9.98 10.70 10.64 44.70 61 N, W, X, Y, Z 45.13 38.12 33.60 35.50 4.28 9.98 10.70 10.64 47.80 N, W 18 20 22 24 112 C Max 10 0 -1.41 B Max .859 1.029 1.155 1.281 1.391 1.529 1.655 1.777 .591 .751 .876 1.001 1.126 1.251 1.376 1.501 .486 .598 .723 .848 .948 1.073 1.198 1.323 1.335 1.335 1.335 1.335 1.335 1.398 1.398 1.398 .106 .106 .106 .106 .106 .169 .169 .169 .330 .330 .330 .330 .330 .393 .393 .393 .358 .358 .358 .358 .358 .421 .421 .421 .357 .357 .357 .357 .357 .419 .419 .419 .965 1.134 1.260 1.386 1.496 1.634 1.760 1.882 mil-c 26482g Series II Tooling for basic series 8526 and 8525 extraction of unwired contacts contacts size part numbers 20 8522-56 16 8522-57 12 8522-58 8522-56 8522-57 8522-58 filler plugs contacts size part numbers colour 20 MS 27488-20 red 16 MS 27488-16 blue 12 MS 27488-12 yellow direction of introduction in grommet These filler plugs are installed at the rear of unwired contacts to maintain connector sealing Backshell tightening pliers, part number : 8498-03 Square jaws, part number : 8500-1015 (order 2 jaws) Tightening support, part number : 8500-30 8500-30 8498-03 Strap backshell tightening spanner par number : 8498-04 8498-04 Square strap : 8498-103 crimping (contact size : 20, 16 and 12) wire sizes part numbers contacts size mm2 AWG crimping tools locators 0.93* 18* 8365 (M22520/1-01) 8365-02 (M22520/1-02) 0.60 20 or or 20 0.38 22 8476-01 (M22520/2-01) 8476-02 (M22520/2-01) 0.21 24 1.91* 14* 1.34 16 8365 (M22520/1-01) 8365-02 (M22520/1-02) 16 0.93 18 0.60 20 3.18 12 12 8365 (M22520/1-01) 8365-02 (M22520/1-02) 1.91 14 8365 with 8365-02 } } } insertion and extraction of wired contacts disposable plastic tool - colored tip. for insertion - white tip. for extraction 8522-20 8522-16 8522-12 8476-01 with 8476-02 contacts part numbers colours size 20 M 81969-14-11 red 16 M 81969-14-03 blue 12 M 81969-14-04 yellow 113