For price, delivery and to place orders: Hittite Microwave Corporation, 2 Elizabeth Drive, Chelmsford, MA 01824
Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com
Application Support: Phone: 978-250-3343 or apps@hittite.com
SWITCHES - SPDT - SMT
1
HMC547LC3
v00.0 811
GaAs MMIC SPDT NON-REFLECTIVE
SWITCH, DC - 28.0 GHz
General Description
Features
Functional Diagram
The HMC547LC3 is a general purpose broadband high
isolation non-reective GaAs MESFET SPDT switch
in a ceramic 3x3 mm leadless surface mount package.
Covering DC to 28.0 GHz, the switch offers over 40 dB
isolation and less than 2 dB insertion loss at midband.
The wide bandwidth, fast switching, and compact size
make this absorbtive SPDT ideal for miliitary EW/ECM
and test equipment applications. The switch operates
using complementary negative control voltage logic
lines of -5/0V and requires no bias supply.
High Isolation: 45 dB @ 10 GHz
40 dB @ 20 GHz
Low Insertion Loss: 1.6 dB @ 10 GHz
1.9 dB @ 20 GHz
Fast Switching: 6 ns
Non-Reective Design
16 Lead Ceramic 3x3 mm SMT Package: 9mm2
Electrical Specications, TA = +25° C, With 0/-5V Control, 50 Ohm System
Typical Applications
The HMC547LC3 is ideal for:
• Fiber Optics & Broadband Telecom
• Microwave Radio & VSAT
• Military Radios, Radar, & ECM
• Test Instrumentation
Parameter Frequency Min. Typ. Max. Units
Insertion Loss
DC - 10.0 GHz
10.0 - 20.0 GHz
20.0 - 28.0 GHz
1.6
1.9
2.4
2.2
2.5
3.0
dB
dB
dB
Isolation
DC - 10.0 GHz
10.0 - 20.0 GHz
20.0 - 28.0 GHz
40
34
30
45
40
34
dB
dB
dB
Return Loss “On State” DC - 28.0 GHz 17 dB
Return Loss RF1, RF2 “Off State”
DC - 10.0 GHz
10.0 - 20.0 GHz
20.0 - 28.0 GHz
25
15
8
dB
dB
dB
Input Power for 1 dB Compression DC - 0.5 GHz
0.5 - 28.0 GHz 20
16
23 dBm
Input Third Order Intercept
(Two-Tone Input Power= +7 dBm Each Tone)
DC - 0.5 GHz
0.5 - 28.0 GHz
26
46
dBm
dBm
Switching Characteristics
tRISE, tFALL (10/90% RF)
tON, tOFF (50% CTL to 10/90% RF)
DC - 28.0 GHz 3
6
ns
ns
For price, delivery and to place orders: Hittite Microwave Corporation, 2 Elizabeth Drive, Chelmsford, MA 01824
Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com
Application Support: Phone: 978-250-3343 or apps@hittite.com
SWITCHES - SPDT - SMT
2
HMC547LC3
v00.0 811
GaAs MMIC SPDT NON-REFLECTIVE
SWITCH, DC - 28.0 GHz
Isolation Between Ports RFC and RF1/RF2
Insertion Loss Return Loss
Isolation Between Ports RF1 and RF2
Input P1dB and P0.1dB
Compression Point Input Third Order Intercept Point
-5
-4
-3
-2
-1
0
0 5 10 15 20 25 30
+25 C
+85 C
-40 C
INSERTION LOSS (dB)
FREQUENCY (GHz)
-80
-70
-60
-50
-40
-30
-20
-10
0
0 5 10 15 20 25 30
RF1 PATH ON
RF2 PATH ON
ISOLATION (dB)
FREQUENCY (GHz)
-80
-70
-60
-50
-40
-30
-20
-10
0
0 5 10 15 20 25 30
RF1
RF2
ISOLATION (dB)
FREQUENCY (GHz)
25
30
35
40
45
50
55
0.01 0.1 1 10 100
+25 C
+85 C
-40 C
INPUT IP3 (dBm)
FREQUENCY (GHz)
10
15
20
25
30
0.01 0.1 1 10 100
P1dB
P0.1dB
INPUT P1dB AND P0.1dB (dBm)
FREQUENCY (GHz)
-40
-30
-20
-10
0
0 5 10 15 20 25 30
RFC
RF1,RF2 ON
RF1,RF2 OFF
RETURN LOSS (dB)
FREQUENCY (GHz)
For price, delivery and to place orders: Hittite Microwave Corporation, 2 Elizabeth Drive, Chelmsford, MA 01824
Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com
Application Support: Phone: 978-250-3343 or apps@hittite.com
SWITCHES - SPDT - SMT
3
HMC547LC3
v00.0 811
GaAs MMIC SPDT NON-REFLECTIVE
SWITCH, DC - 28.0 GHz
Truth Table
Control Voltages
Control Input Signal Path State
A B RFC to RF1 RFC to RF2
High Low On Off
Low High Off On
State Bias Condition
Low 0 to -0.5V @ 10 uA Max.
High -5V @ 3 uA Typ. to -7V @ 10 uA Typ. (± 0.5V)
Absolute Maximum Ratings
RF Input Power (A,B = 0V/-5V) +25 dBm
Control Voltage Range (A & B) +5.0V to -7.5V
Hot Switch Power Level
(A,B = 0V/-5V) +22 dBm
Channel Temperature 150 °C
Continuous Pdiss (T=85°C)
(derate 3.3 mW/°C above 85°C)
(Insertion Loss Path)
0.215 W
Thermal Resistance
(Insertion Loss Path) 302 °C/W
Continuous Pdiss (T=85°C)
(derate 5.6 mW/°C above 85°C)
(Terminated Path)
0.363 W
Thermal Resistance
(Terminated Path) 179 °C/W
Storage Temperature -65 to +150 °C
Operating Temperature -40 to +85 °C
ESD Sensitivity (HBM) Class 1A
ELECTROSTATIC SENSITIVE DEVICE
OBSERVE HANDLING PRECAUTIONS
For price, delivery and to place orders: Hittite Microwave Corporation, 2 Elizabeth Drive, Chelmsford, MA 01824
Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com
Application Support: Phone: 978-250-3343 or apps@hittite.com
SWITCHES - SPDT - SMT
4
HMC547LC3
v00.0 811
GaAs MMIC SPDT NON-REFLECTIVE
SWITCH, DC - 28.0 GHz
Outline Drawing
Part Number Package Body Material Lead Finish MSL Rating Package Marking [2]
HMC547LC3 Alumina, White Gold over Nickel MSL1 [1] H547
XXXX
[1] Max peak reow temperature of 260 °C
[2] 4-Digit lot number XXXX
Package Information
NOTES:
1. PACKAGE BODY MATERIAL: ALUMINA.
2. LEAD AND GROUND PADDLE PLATING: GOLD FLASH OVER NICKEL.
3. DIMENSIONS ARE IN INCHES (MILLIMETERS).
4. LEAD SPACING TOLERANCE IS NON-CUMULATIVE.
5. PACKAGE WARP SHALL NOT EXCEED 0.05MM DATUM – C –
6. ALL GROUND LEADS AND GROUND PADDLE MUST BE SOLDERED TO
PCB RF GROUND.
For price, delivery and to place orders: Hittite Microwave Corporation, 2 Elizabeth Drive, Chelmsford, MA 01824
Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com
Application Support: Phone: 978-250-3343 or apps@hittite.com
SWITCHES - SPDT - SMT
5
HMC547LC3
v00.0 811
GaAs MMIC SPDT NON-REFLECTIVE
SWITCH, DC - 28.0 GHz
Pin Descriptions
Pin Number Function Description Interface Schematic
1, 5, 9, 12, 16 N/C This pin should be connected to PCB RF ground to
maximize isolation
2, 4, 6, 8, 13, 15 GND Package bottom has exposed metal paddle that must also
be connected to PCB RF ground.
3, 7, 14 RFC, RF1, RF2 This pin is DC coupled and matched to 50 Ohm. Blocking
capacitors are required if RF line potential is not equal to 0V.
10 B See truth table and control voltage table.
11 A See truth table and control voltage table.
For price, delivery and to place orders: Hittite Microwave Corporation, 2 Elizabeth Drive, Chelmsford, MA 01824
Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com
Application Support: Phone: 978-250-3343 or apps@hittite.com
SWITCHES - SPDT - SMT
6
HMC547LC3
v00.0 811
GaAs MMIC SPDT NON-REFLECTIVE
SWITCH, DC - 28.0 GHz
Evaluation PCB
The circuit board used in the application should be
generated with proper RF circuit design techniques.
Signal lines at the RF port should have 50 Ohm
impedance and the package ground leads and
package bottom should be connected directly to
the ground plane similar to that shown above. The
evaluation circuit board shown above is available
from Hittite Microwave Corporation upon request.
List of Materials for Evaluation PCB EVAL01-HMC547LC3 [1]
Item Description
J1 - J3 PCB Mount SRI SMA Connector
J4 - J6 DC Pin
R1 - R2 100 Ohm Resistor, 0603 Pkg.
U1 HMC547LC3 SPDT Switch
PCB [2] 600-00005-00-1 Evaluation PCB
[1] Reference this number when ordering complete evaluation PCB
[2] Circuit Board Material: Rogers 4350