THM 3-2422WI - TRACOPOWER - Datasheet.Live

http://www.tracopower.com

DC/DC Converters

THM 3WI Series, 3 Watt

Features

◆ Ultra wide 4:1 input voltage

◆ I/O isolation 5000 VACrms rated for

250 VACrms working voltage

◆ 2 x MOPP Medical safety according to

AAMI/ANSI ES 60601-1:2005(R) and

IEC/EN 60601-1 3rd edition

◆ Low leakage current <2 µA

◆ Very high efﬁciency up to 87%

◆ Extended operating temperature range

–40°C to 94°C at full load.

◆ Input ﬁlter to meet EN55022 class A

◆ 3-year product warranty

The THM-3WI series is a range of high performance, regulated 3 Watt DC/DC

converters in a DIP-24 plastic package. The reinforced I/O-isolation system com-

plies with the medical safety requirements for MOPP (Means Of Patient Protection).

Together with a wide 4:1 input voltage range, and an internal EMI ﬁlter to meet

EN55022 class A the converters constitute also a reliable solution for many de-

manding applications such as transportation systems, industrial control equipments,

measurement equipments, and some IGBT driver applications. With A high efﬁcien-

cy of up to 87% and highest grade components the converters can reliably operate

in an ambient temperature range of –40 up to +94°C at full load.

Order code Input voltage range Output voltage Output current max. Efﬁciency typ.

THM 3-0510WI

4.5 – 9 VDC

(5 VDC nominal)

3.3 VDC 1000 mA 81.0 %

THM 3-0511WI 5.0 VDC 600 mA 84.5 %

THM 3-0512WI 12 VDC 250 mA 85.5 %

THM 3-0513WI 15 VDC 200 mA 87.5 %

THM 3-0515WI 24 VDC 125 mA 85.5 %

THM 3-0521WI ±5.0 VDC ±300 mA 83.0 %

THM 3-0522WI ±12 VDC ±125 mA 86.0 %

THM 3-0523WI ±15 VDC ±100 mA 86.0 %

THM 3-2410WI

9 – 36 VDC

(12 VDC nominal)

3.3 VDC 1000 mA 82.0 %

THM 3-2411WI 5.0 VDC 600 mA 84.5 %

THM 3-2412WI 12 VDC 250 mA 87.0 %

THM 3-2413WI 15 VDC 200 mA 87.0 %

THM 3-2415WI 24 VDC 125 mA 87.0 %

THM 3-2421WI ±5.0 VDC ±300 mA 83.0 %

THM 3-2422WI ±12 VDC ±125 mA 87.0 %

THM 3-2423WI ±15 VDC ±100 mA 86.0 %

THM 3-4810WI

18 – 75 VDC

48 VDC nominal)

3.3 VDC 1000 mA 81.0 %

THM 3-4811WI 5.0 VDC 600 mA 84.0 %

THM 3-4812WI 12 VDC 250 mA 87.0 %

THM 3-4813WI 15 VDC 200 mA 86.5 %

THM 3-4815WI 24 VDC 125 mA 86.5 %

THM 3-4821WI ±5.0 VDC ±300 mA 83.0 %

THM 3-4822WI ±12 VDC ±125 mA 86.0 %

THM 3-4823WI ±15 VDC ±100 mA 86.0 %

Models

Page 1 of 3

ES 60601-1

http://www.tracopower.com

DC/DC Converters

THM 3WI Series 3 Watt

Input Specifications

Input current at no load 5 Vin models: 20 mA typ.

24 Vin models: 6 mA typ.

48 Vin models: 4 mA typ.

Start-up voltage / under voltage shut down 5 Vin models: 4.5 VDC / 4.0 VDC typ.

24 Vin models: 9.0 VDC / 8.0 VDC typ.

48 Vin models: 18 VDC / 16 VDC typ.

Surge voltage (1 sec. max.) 5 Vin models: 16 VDC max.

24 Vin models: 50 VDC max.

48 Vin models: 100 VDC max.

Conducted noise EN 55022 class A, without external components

ESD

(electrostatic discharge)

EN 61000-4-2, air ±8 kV, contact ±6 kV,

perf. criteria A

Radiated immunity EN 61000-4-3, 10 V/m, perf. criteria A

Fast transient / surge (with external input capacitor / diode) EN 61000-4-4, ±2 kV, perf. criteria A

EN 61000-4-5, ±2 kV perf. criteria A

– external input capacitor: 5 Vin models: Nippon chemi-con KY 1000 µF/ 25 V and

reverse diode (Vishay V10P45) in parallel

24 Vin models: Nippon chemi-con KY 470 µF/ 50 V

48 Vin models: Nippon chemi-con KY 330 µF/ 100 V

Conducted immunity EN 61000-4-6, 10 Vrms, perf. criteria A

External input fuse required (recommended values, slow blow type) 5 Vin models: 2.5 A

24 Vin models: 1.5 A

48 Vin models: 1 A

Output Specifications

Voltage set accuracy ±1.0 % max.

Regulation – Input variation single output models 0.2 % max.

dual output models 0.5 % max.

– Load variation 0 – 100 %: single output models: 0.2 % max..

dual output models balanced load: 1.0 % max.

dual output models unbalanced load: 5.0 % max.

Minimum load not required

Start up time 30 mS

Ripple and noise (20 MHz Bandwidth) 3.3 & 5.0 VDC models: 30 mVp-p typ. with cap. 10µF/25V X7R MLCC

12 & 15 VDC models: 40 mVp-p typ. with cap. 10µF/25V X7R MLCC

24 VDC models: 50 mVp-p typ. with cap. 4.7µF/50V X7R MLCC

Transient response (25% load step change) 250 µs typ.

Current limitation 150 % Iout nominal typ. (hiccup mode)

Short circuit protection continuous (automatic recovery)

Over voltage protection 3.3 VDC output models: 3.7 – 5.0 VDC

5 VDC & ±5 VDC output models: 5.6 – 7.0 VDC

12 VDC output models: 13.5 – 16.0 VDC

15 VDC output models: 18.3 – 22.0 VDC

24 VDC output models: 29.1 – 34.5 VDC

±12 VDC output models: 13.5 – 18.2 VDC

±15 VDC output models: 17.0 – 22.0 VDC

Capacitive load 3.3 VDC output models: 1050 µF max.

5 VDC output models: 750 µF max.

12 VDC output models: 130 µF max.

15 VDC output models: 100 µF max.

24 VDC output models: 39 µF max.

±5 VDC output models: 430 µF max. (each output)

±12 VDC output models: 75 µF max. (each output)

±15 VDC output models: 56 µF max. (each output)

All speciﬁcations valid at nominal input voltage, full load and +25°C after warm-up time unless otherwise stated.

Page 2 of 3

Speciﬁcations can be changed without notice! Make sure you are using the latest documentation, downloadable at www.tracopower.com

www.tracopower.com

DC/DC Converters

THM 3WI Series 3 Watt

Outline Dimensions

Rev. May 04. 2015

Pin Single Dual

2–Vin (GND) –Vin (GND)

11 No con. –Vout

14 +Vout +Vout

16 –Vout Common

22 +Vin (Vcc) +Vin (Vcc)

23 +Vin (Vcc) +Vin (Vcc)

Standard Pinout

Dimensions in [mm], () = Inch Tolerances ±0.5 (±0.02)

Pin ø 0.6 ±0.1 (0.024 ±0.004) Pin pich tolerances ±0.25 (±0.01)

General Specifications

Temperature ranges – Operating –40°C to +94°C (without derating)

– Casing +105°C max.

– Storage –55°C to +125°C

Humidity (non condensing) 95 % rel H max.

Temperature coefficient ±0.02 %/K typ.

Switching frequency 150 kHz ±15 kHz (puls width modulation)

I/O isolation voltage – to meet UL/IEC/EN 60601-1 5000 VACrms, rated for 250 VACrms working

(50Hz, 60sec.) voltage, 2 x MOPP

Clearance/creepage 8 mm min.

Leakage current 2 µA max. (at 240 VAC, 60 Hz)

Isolation capacitance – Input/Output 17 pF max. (at 100 KHz, 1 V)

Safety standards ANSI/AAMI ES 60601-1:2005/(R)2012,

UL 60601-1, IEC/EN 60601-1 3rd edition

– Certification documents www.tracopower.com/overview/thm3wi

Reliability, calculated MTBF (MIL-HDBK-217F, at +25°C, ground benign) >6.4 Mio. h

Casing material non conductive plastic (UL 94V-0-rated)

Potting material silicone (UL 94V-0-rated)

Vibration and thermal shock resistance according to MIL-STD-810F

Weight 14.0 g (0.48 oz)

Soldering temperature max. 265°C / 10 sec.

Environmental compliance – Reach www.tracopower.com/overview/thm3wi

– RoHS according RoHS directive 2011/65/EU

Page 3 of 3

- The component is not be used in an oxygen rich environment.

- The component is not to be used in conjunction with ﬂammable anaesthetics and agents.

- The component has to be disposed appropriately. Please refer to local regulations (Waste Electrical and Electronic Equipment).

- A modiﬁcation of the component is not allowed.

2223

16 14

Bottom view

15.24

2.54

20.3

(0.10)

(0.60)

(0.80)

10.2 (0.40)3.8

(0.15)

2.54 15.24 5.08

4.5

31.8

(0.10)

(0.60)

(0.20)

(0.18)

(1.25)

2324

15 13

Bottom view

15.24

2.54

20.3

(0.10)

(0.60)

(0.80)

10.2 (0.40)3.8

(0.15)

2.54 20.32 2x2.54

2.0

31.8

(0.10)

(0.80)

(2x0.1)

(0.08)

(1.25)

Standard pinning Optional pinning: suffix -A1

Pin Single Dual

1+Vin (Vcc) +Vin (Vcc)

11 No pin Common

12 –Vout No pin

13 +Vout –Vout

15 No pin +Vout

23 –Vin (GND) –Vin (GND)

24 –Vin (GND) –Vin (GND)

Optional Pinout