Cannon
CA Bayonet Connectors
In Accordance with VG95234
IP69K Compliant
2www.ittcannon.com
Dimensions shown in mm
Specifications and dimensions subject to change
3
www.ittcannon.com
Dimensions shown in mm
Specifications and dimensions subject to change
Interconnect Technologies & Solutions
For over 90 years, ITT has been developing innovative solutions for harsh environment applications. We have a
proven track record of demonstrating our expertise and commitment to the industrial industry, offering the broad-
est portfolio of interconnect products.
Our interconnect range include sealed circulars, plastic and metal shell bayonet coupling circulars, miniature metal
shell circulars, PC Board header connectors and sensor and direct device connectors. ITT is also a systems supplier,
providing value-added module and harness assemblies.
In addition to our CA Bayonet series, we also offer these connectivity solutions:
Environmentally Sealed & Harsh Environments
Cannon MIL-DTL-38999
High density contact arrangements, corrosion-
resistant shells, rear release crimp snap-in
contacts, operates under severe high temperature
vibration testing.
Cannon KPT / KPSE
Environmentally sealed miniature circular
connectors available in two versions: KPT (solder
contact) and KPSE (high performance crimp
contact). Intermateable and intermountable with
all MIL-C-26482 connectors and is available with
many materials, finishes and configurations.
Cannon Trident
Versatile range of electrical connectors based on a
standard contact design. Options include; industrial
grade, harsh environment and shielded circulars.
Table of Contents
Product Selection Guide 4-5
Introduction 6
CA VG/CA Bayonet 6
Technical Data 7
Mechanical Features 8
Mounting Holes & Dimensions 9
How to Order 11
Contact Arrangement 13
Connector Dimensions 31
Coupling Dimensions 46
CA IP69K
General Information 47
How to Order 48
Electrical Data 50
Connector Dimensions 51
Accessories 53
Contacts 59
Part Number Search 64-65
Product Safety Information 66
4www.ittcannon.com
Dimensions shown in mm
Specifications and dimensions subject to change
Connector
Series
Selection
Table
Sure Seal CLC SLC SLE APD Trident
Rectangular
Trident
Circular
MS E/F/R
Industrial/Commercial
Military - - - - - - -
Standards/Associated
Specifications -SAE J2030
USCar
SAE J2030
USCar
SAE J2030
USCar ISO 15170
UL 1977
NFF 61-030
(TFR)
UL 1977
EN 61984
MIL-DTL-5015
VG 95342
Number of Circuits 2 to 10 2 & 4 5, 8, 10 & 15 19 & 28 1 to 51 2 to 36 4 to 48 1 to 65
Max. Operating Voltage 48 V DC 300 V AC 300 V AC 300 V AC
48 V DC
High Voltage:
500 V DC/AC
250 V AC
250 V AC
High Voltage:
500 V DC/AC
50 V DC
Dielectric Withstanding
Voltage
(at sea level)
1200 V AC 1000 V AC 1000 V AC 1000 V AC
1000 V AC
High Voltage:
3500 V AC
2000 V AC
2000 V AC
High Voltage:
3500 V AC
3000 V AC
Max. Current Rating @
40°C 17 A 5 A 13 A 13 A 245 A 13 A 30 A 245 A
EMI/RFI Shielding - - - - - -
Wire Gauge Range AWG 20 to 14 20 to 16 20 to 16 20 to 16 22 to 0 26 to 14 26 to 12 26 to 0
Wire Gauge Range mm² 0,4 - 1,5 mm² 0,50 - 1,0 mm² 0,50 - 1,0 mm² 0,50 - 1,0 mm² 0,35 - 50 mm² 0,14 - 2,5 mm² 0,14 - 4,0 mm² 0,14 - 50 mm²
Power & Signal Layouts - - - - - -
Mating Cycles (max.) 100 25 25 25 50 500 500 100
Type of Coupling Ring Snap Clip Lock Snap Lock Snap Lock Bayonet Snap Lock Bayonet Thread
Mechanical Coding - - - -
Environmental Sealing
(mated condition)
IP 68
(1 bar / 12h) IP 68 IP 68 IP 68 IP67
IP69k IP 20 IP 67 IP 65
Operating Temperature -40°C to 105°C
-40°F to 221°F
-40°C to 150°C
-40°F to 302°F
-40°C to 150°C
-40°F to 302°F
-40°C to 125°C
-40°F to 257°F
-40°C to 125°C
-40°F to 257°F
-55°C to 105°C
-67°F to 221°F
-55°C to 125°C
-67°F to 257°F
-55°C to 125°C
-67°F to 257°F
Shock Test (g‘s) 50 100 100 100 - 50 50 50
Max. Vibration Resistance 10 - 55 Hz
1,5 mm
100 m/s²
10 g´s
100 m/s²
10 g´s
100 m/s²
10 g´s
300 m/s²
30 g‘s
100 m/s²
10 g´s
100 m/s²
10 g´s
100 m/s²
10 g´s
Individual Wire Sealing -
Cable Jacket Sealing - - - -
Shell Material Nitril-Butadien
Elastomer Thermoplastic Thermoplastic Thermoplastic Polyamide Plastic Polyamide Plastic Black Nylon or
Zinc Alloy Aluminum Alloy
RoHS Nickel (48h salt spray)
------
Cadmium (olive, 500h) - - - - - - -
RoHS Zinc Cobalt (black,
200h) -------
Zinc Cobalt (green, 200h) - - - - - - - -
RoHS Zinc Nickel (blue,
500h) BLUE GENERATION® --------
Contact Plating Tin or Silver Tin or Gold Tin or Gold Tin or Gold Tin, Silver or
Gold Tin or Gold Tin or Gold Silver or Gold
Crimp, machined -
Crimp, stamped -
Solder - - - -
Printed Circuit Solder -
Co-Ax - - - - - -
Fiber Optic - - - - - - - -
First-Mate Last-Break - - - - -
Available - Not available
Contacts Shell Plating Environmental Mechanical Electrical General
5
www.ittcannon.com
Dimensions shown in mm
Specifications and dimensions subject to change
CA Bayonet CA-INDUSTRIAL CA Triple
Thread CGL KPT / KPSE KPTC PV KJL KJ KJA
-
- - -
VG 95234 - ISO 16750
VG 95234
DIN/VDE 0627
5.4.3
IEC 512-25-1
DIN/VDE 0100
Part 410
MIL-DTL-26482
Series 1,
VG 95328
MIL-DTL-26482
Series 1,
VG 95328
MIL-DTL 26482
Series 2
MIL-DTL-38999
Series I
MIL-DTL-38999
Series II
MIL-DTL-38999
Series III
1 to 85 2 to 55 1 to 85 3 to 11 2 to 61 2 to 61 3 to 61 3 to 128 3 to 128 3 to 128
50 V DC 50 V DC 50 V DC 700 V DC 50 V DC 50 V DC 500 V AC 1250 V AC 1250 V AC 1250 V AC
3000 V AC 2000 V AC 3000 V AC 7200 V AC 2300 V AC 2300 V AC 2300 V AC 2300 V AC 2300 V AC 2300 V AC
245 A 30 A 245 A 100 A 22 A 22 A 23 A 23 A 23 A 23 A
26 to 0 26 to 12 26 to 0 15 to 3 24 to 16 24 to 16 24 to 12 28 to 12 28 to 12 28 to 12
0,14 - 50 mm² 0,14 - 4,0 mm² 0,14 - 50 mm² 1,5 - 25 mm² 0,21 - 1,91 mm² 0,4 - 2,0 mm² 0,4 - 5,0 mm² 0,45 - 5,0 mm² 0,45 - 5,0 mm² 0,45 - 5,0 mm²
- -
500 200 500 500 500 500 500 500 500 500
Reverse Bayonet Reverse Bayonet Triple Thread Bayonet Bayonet Bayonet Bayonet Bayonet Bayonet Triple Thread
- - - -
IP68 (1 bar /
16h)
IP69k
IP68 (1 bar /
16h)
IP69k
IP68 (1 bar /
16h)
IP69k
IP 67 IP 68
(0,2 bar / 48h)
IP 68
(0,2 bar / 48h)
Environmental
resitant acc. to
EIA-364-02
Environmental
resitant acc. to
EIA-364-02
Environmental
resitant acc. to
EIA-364-02
Environmental
resitant acc. to
EIA-364-02
-55°C to 125°C
-67°F to 257°F
-55°C to 125°C
-67°F to 257°F
-55°C to 125°C
-67°F to 257°F
-50°C to 140° C
-58°F to 284°F
-55°C to 125°C
-67°F to 257°F
-55°C to 125°C
-67°F to 257°F
-55°C to 200°C
-67°F to 392°F
-65°C to 200°C
-85°F to 392°F
-65°C to 200°C
-85°F to 392°F
-65°C to 200°C
-85°F to 392°F
50 50 50 50 50 50 10 300 300 300
200 m/s²
20 g´s
100 m/s²
10 g´s
300 m/s²
30 g‘s
300 m/s²
30 g‘s
200 m/s²
20 g´s
200 m/s²
20 g´s
200 m/s²
20 g´s
300 m/s²
30 g‘s
10Hz - 500Hz
Random: 43,7g
600m/s²
60g‘
- - -
Aluminum Alloy Aluminum Alloy Aluminum Alloy Aluminum Alloy Aluminum Alloy Aluminum Alloy Aluminum Alloy Aluminum Alloy Aluminum Alloy Aluminum Alloy
- -
- - - - -
- - - - - -
- - - -
Silver or Gold Tin or Gold Silver or Gold Silver or Gold Gold Gold Gold Gold Gold Gold
- (KPSE)
- --------
- (KPT) - - -
- -
---- -
------
- - - - - -
6www.ittcannon.com
Dimensions shown in mm
Specifications and dimensions subject to change
Cannon CA Industrial
Introduction
Cannon CA-Bayonet series was designed in accordance with
the VG95234 specification. This versatile and highly reliable
connector series is an improvement on the well established
MIL-C-5015 series. CA-Bayonet has a proven “reverse bayonet”
coupling design that offers exceptional vibration protection, by
a simple 120° turn.
Initially designed for aircraft and airborne applications, these
rugged connectors are used in the electrical equipment of
various off-road vehicles, construction machinery, industrial
devices, railroad and military wheelers.
Connectors in accordance with VG95234 are interchangeable
with the corresponding MIL-C-5015 connectors. Both
connector lines feature the same shell dimensions and contacts
layouts. How ever, due to the different coupling systems (MIL-
C-5015 threaded coupling, VG95234 bayonet coupling) they
are not intermateable.
Advantages
– rugged shell design
– environmental
– bayonet coupling for easy mating and unmating
– vibration proof
– waterproof up to IP68, (10 meters / 35 feet or 1 bar for 16 h)
and IP69k (Jet water)
Cannon has the complete VG95234 program available and, in
addition, many other types which exceed the requirements of
VG95234 and MIL-C-5015.
Attention:
Metal shell connectors which may be touched are not
suitable for mains power.
Connector Design
Due to the rugged shell made of an aluminium alloy, these
connectors withstand most severe conditions. Olive drab
chromate coating over cadmium plating protects the surface of
the shell.
Cannon offers three plating solutions to customers refusing
cadmium plating. Zinc cobalt green offers similar properties like
cadmium plating while zinc cobalt black and zinc nickel is RoHS
compliant.
Over 180 contact arrangements are available for 1 to 65 circuits
and up to 245 A per unit.
The insulators are made of high quality polychloroprene and
withstand temperatures from -67°/+257°F (-55/125°C). This
material is self-extinguishing, resistant against hydraulic fluids,
jet fuel, diesel fuel, gasolines, lubricants, brake and fire
extinguisher fluids (short wetting only). In case of lifetime
moistening ITT Cannon offers FKM insulators as an alternative.
The contacts are made of copper alloy plated with a hard silver
finish guarantee at least 500 mating cycles. There are solder,
crimp and PCB contacts in place. The crimp contacts offer a
comprehensive range of termination reductions. All solder
contacts feature a special passivation to comply with ROHS
requirements. The crimp contacts allow highly reliable crimping
with wires when using the recommended tools according to
VG95234. Crimp contacts can be exchanged at least five times
still preserving specified contact retention.
The coupling unit is featured by the Cannon roller bolts made
of stainless steel actually rolling down the mating ramps, thus
reducing coupling force by the operator. In addition, the
Cannon design employs two coupling nut versions for different
application cases, with and without wavespring and washer.
The version without wavespring guarantees perfect sealing
while the other version stands up to high vibration levels.
The bayonet design allows fast and easy coupling and
uncoupling. An audible control by metallic sound and
visual control by colour-marked snap-in position offer
additional coupling security.
VG connectors are basically designed for single wire harnessing.
For full environmental sealing each conductor is sealed
completely within the grommet. However, Cannon offers as an
alternative O-ring sealed PG and metric gland adaptors for
faster harnessing standing up to the same sealing level than
the VG types.
For highest environmental sealing levels the Universal Endbell is
available. Connectors equipped with this Endbell and a recepta-
cle with O-ring option reach a sealing up to IP69k according to
DIN 40050. So the CA-Bayonet is
equipped for applications where
water jets are used for cleanig the
equipment. Universal Endbell has
simple to harness shielding
connection and is field repairable.
Restrictions:
* European Community “Old Car” directive (2000/53/EG)
* European Community Waste Electrical and Electronic Equipment (WEEE)
2000/0158
* European Community restrictions of use of certain hazardous substances
in WEEE (ROS) (2000/0159)
7
www.ittcannon.com
Dimensions shown in mm
Specifications and dimensions subject to change
Contact rating at 68 °F (+20 °C)
Contact size Max. current
A
10 8
16S/15S 22
16/15 22
12/25 41
8/60/100 74
4/160 135
0/500 245
Current rating
Depending on ambient temperature
Contact resistance
(Mil li volt test)
The contact resistance has to be tested according to VG95234
part 2, test no. 5.10.1 and VG 95210, part 37. The measuring
points are indicated in the illustration.
Operating voltage and connector usage
Connectors in equipments must not be separated or mated
under load when used per specifications.
As according to specification the connectors are suitable for an
operating voltage of 50 V (see Product Safety Information).
How ever, this is only valid, when the connectors are freely
accessible during operation and consequently might be
touchable. When the connectors will be operated with line
voltage, please contact ITT Customer Service for an alternative
connector solution.
Contact size Max. contact
resistance
Me tric AWG mW
10 – 12
15S/15 16S/16 6
25 12 3
60/100 81
160 4 0,5
500 0 0,2
Insulation resistance
Acc. to VG95319, part 2, test no. 5.12 and VG95210, part 32,
test condition B
Standard insulator material > 1000 MW
FKM insulator material (upon request) > 5000 MW
Test voltage
Acc. to VG95319, part 2, test no. 5.13 and VG 95210, part 31
Test voltage for service rating:
Service rating Test voltage Vrms
In stru men ts 1050
A 2000
B 4500
D 2500
E 3500
Air and creepage paths (min.)
Voltage class Instr. ADE
Air and creepage paths mm 0,7 1,1 2,8 4,8
Cannon VG/CA-Bayonet
Technical Data
8www.ittcannon.com
Dimensions shown in mm
Specifications and dimensions subject to change
Cannon VG/CA-Bayonet
Me cha ni cal Features
Ambient temperature
Stan dard insulator material
–55°/125°C (– 67/257°F)
FKM insulator material*
–30°/200°C (–22/392°F)
Safety provisions**
In mated condition
General (All connectors):
IP67 acc. to . DIN 40050
VG 95234 Connectors:
1 bar for 16h
IP69k Version Connectors:
Plug with Universal Endbell and receptacle with O- RIng
IP68 (1bar for 16h); IP69k (Water jet sealed) acc. to DIN 40050
Vibration test
200 m/s2at 10 to 2000 Hz
Mating cycles
500 min.
Withdrawl force per contact.
The corresponding separating force has to be measured
accord ing to VG95319, part 2, test no. 5.7. using the required
test gage and DIN EN60512-16-5.
Contact size Separating force min.
me tric AWG N Gage
10 – 0,3 G 0,99
15S/15 16S/16 1,0 G 1,56
25 12 1,5 G 2,36
60/100 8 3,0 G 3,58
160 4 4,0 G 5,69
500 0 8,5 G 9,04
Gage
(see also VG95234, Part 1)
Coupling torque
The allowable coupling torques have to be tested under full
bun dle conditions of the connectors to VG95319, part 2, test no.
5.8.2.
Shell Allowable coupling torque
size closing and opening Opening
Nm max. Nm min.
10SL 1,7 0,15
12S 2,5 0,23
14S 3,6 0,35
16S/16 5,5 0,46
18 8 0,58
20 9 0,7
22 11 0,8
24 14 0,8
28 17 0,92
32 19 1,03
36 23 1,03
Contact retention
The contact retention has to be tested according to VG95319,
part 2, test no. 5.4. Test force direction = Mating direction.
Contact Test force
size AWG N
10 – 30
15S/15 16S/16 35
25 12 55
60/100 8 80
160 4 90
500 0 95
Materials
Shell Alu mi n um alloy
Stan dar d finish Olive drab chromate coating over
cadmium plating
Alternative finish Zinc cobalt (see page 12 –
Modifica tion)
Insulator Po ly chlo ro prene (Stan dard)
and grommets FKM (High tem pe ra ture)*
Contacts Copper alloy
Stan dar d finish Hard silver
Special finish A176 nickel and hard gold plating
** upon request
** Longitudinal sealing: The connector is not sealed against fluids entering
through the cable, as the sealing lips of the single wire sealing are pressing
against the jacket of the individual conductors.
Gage Contact diameter d L
+0,01 –1
G 0,99 0,99 7
G 1,56 1,56 9
G 2,36 2,36 12
G 3,58 3,58 13
G 5,69 5,69 13
G 9,04 9,04 13
9
www.ittcannon.com
Dimensions shown in mm
Specifications and dimensions subject to change
Cannon VG/CA-Bayonet
Mounting Holes
Mounting holes for wall mounting receptacles style A, B1, B2,
C1, C2, J1, J2, N1 and N2 acc. to VG95234, or CA 3100E/F/R-B
and CA 3102 E-B.
Shell ø d1H12 ø d2H13 e screws to be used
size Style A Style B1, B2 Style Style ±0,15 A, B2, C2, J2, B1, C1, J1, N
CA 3102E-B C1, C2, J1, J2 A, B2, C2, B1, C1, J1, N1 N2 CA 3100E, F
N1, N2 J2, N2
CA 3100E, F, R-B CA-B CA 3100E, F, R-B CA-B-Mod. 05
TBF-B/-05 Mod-05
10SL 16,4 18,5 3,4 4,5 18,2 M3...DIN 85 M4...DIN 84
12S 16,4 21,7 3,4 4,5 20,6 M3...DIN 85 M4...DIN 84
14S 19,7 24,9 3,4 4,5 23,0 M3...DIN 85 M4...DIN 84
16S 22,9 27,7 3,4 4,5 24,6 M3...DIN 85 M4...DIN 84
16 22,9 27,7 3,4 4,5 24,6 M3...DIN 85 M4...DIN 84
18 26,1 31,1 3,4 4,5 27,0 M3...DIN 85 M4...DIN 84
20 29,5 34,5 3,4 4,5 29,4 M3...DIN 85 M4...DIN 84
22 32,7 37,8 3,4 4,5 31,8 M3...DIN 85 M4...DIN 84
24 36,0 41,3 3,9 4,5 34,9 M3,5...DIN 85 M4...DIN 84
28 42,0 47,1 3,9 5,5 39,7 M3,5...DIN 85 M5...DIN 84
32 48,3 53,8 4,5 5,5 44,5 M4...DIN 85 M5...DIN 84
36 54,6 60,0 4,5 5,5 49,2 M4...DIN 85 M5...DIN 84
* When used with safety elements the max. outer diameter must not exceed the outer diameter of the screw head.
Harnessing
VG95234 connectors are designed for single wire harnessing.
Full sealing will be guaranteed only by using wires in accordance
with MIL-W-5086, LN 9251 (for AWG) and TL 6145-009 and TL
6145-011 (for metric wires). All other wires have to conform to
wire and insulation diameters with the data given in the follow -
ing table:
Contact size Crimp- and solder contacts Insulation Ø
AWG me tric AWG me tric AWG me tric
mm mm2mm
– 10 – 0,75-1,0 – 1,45-2,5
16S/15S 16/15 16 0,75-1,5 1,6-2,8 1,60-2,8
12 25 12 2,5 2,9-3,5 2,9-3,5
– 60 – 6,0 – 3,5-4,9
8 100 8 10,0 4,2-5,8 5,5-6,5
4 160 4 16,0 6,2-9,0 7,1-9,0
0 500 0 50,0 10,5-13,0 10,5-13,0
Wire Stripping
Either mechanical or hot stripping can be used. Prevent
conductor or insulator damage. For solder contacts, conductors
have to be pretinned.
Note: Do not twist conductors used with crimp contacts. Do not
touch uninsulated conductors before crimping. Twisting of
conductors and grease or lubricants on the wires cause poor crimp
quality.
Contact size Stripping length
AWG me tric mm
– 10 4,0 + 0,4
16S/15S 16/15 6,0 + 0,5
12 25 6,0 + 0,5
8 60/100 11,0 + 0,8 – 0,4
4 160 11,0 + 0,8 – 0,4
0 500 13,0 + 0,8 – 0,4
10 www.ittcannon.com
Dimensions shown in mm
Specifications and dimensions subject to change
Shell L1 L2 L3 L4 L5 L6
Size (D) (G/M) (G/M) R1
min. min. min. min. +10 mm max. max.
10SL 70 70 70 65 75 8,0 3,5
12S 70 75 75 70 80 8,0 3,5
14S 70 75 75 70 80 8,0 3,5
16S 70 90 80 80 90 8,0 3,5
16 80 100 90 90 100 6,5 3,5
18 90 100 90 90 100 8,0 3,5
20 90 100 95 100 110 8,0 3,5
22 90 100 95 100 110 8,0 3,5
24 110 120 105 110 120 8,0 5,0
28 110 120 105 110 120 9,0 5,0
32 110 180 115 120 130 9,0 6,0
36 110 190 120 130 140 9,0 6,0
Cannon VG/CA-Bayonet
Separating and Mounting Dimensions
When using connectors according to VG95234 the below mentioned installation dimensions have to be met.
Connector style D
or
CA3106E-B and
CA3106F-B
CA3106F-B-13/-14/-15
Connector style G, M, R1
or
CA3106E-B-02/-03/-06
CA3106E-B-13/-14/-15 and
CA3106E-B-32
with shrink boot, straight,
acc. VG95343
Connector style E, E1 and K
or
CA3108E/F-B and
CA3108F-B-13/-14/-15
Connector style G, M, R1
or
CA3106E-B-02/-03/-06
CA3106E-B-32
with shrink boot 90°
acc. to VG 95343
11
www.ittcannon.com
Dimensions shown in mm
Specifications and dimensions subject to change
Cannon VG/CA-Bayonet
How to order
VG Order reference
VG95234 A–32 – 6 S1N
Series
Shell style
Dash
Shell size
Contact arrangement
Contact type
Contact termination
Insulator position
Explanation
Series VG95234
Shell style J1, J2, N1, N2, S1, U1, U2 – wall
mounting receptacle
F – cable connection plug
A, B1, B2 – box mounting receptacle
C1, C2 – bulkhead receptacle
D, G, H, L, M, R1, T – straight plug
E, E1, K – plug 90°
Shell size 10SL, 14S, 16S, 16, 18, 20, 22,
24, 28, 32 and 36
Contact arrangement see page 13
Contact type P – Pin contact
S – Socket contact
Contact termination without identification – contacts for
metric wire sizes identification 1* –
contact for AWG wire sizes
Insulator position see page 31
Accessories acc. to VG
Dummy receptacles VG95234 BOD
Gaskets, front mount VG95234 DA
Gaskets, rear mount VG95234 DH
Protecting caps VG95234 KR
Protecting caps VG95234 KB
Cabel caps VG95234 KK
Bushing VG95234 KT
* Only valid for layout within the VG95234.
Layout list permitting identification 1:
Layout Page Number
22-2 18
24-9 19
24-11 19
24-12 20
28-22 22
32-1 22
32-6 23
36-3 24
36-5 24
36-6 24
How to order
Cannon Order reference
CA 3106 E 18 – 1 SXB–***
Series
Shell style
Class
Shell size
Contact arrangement
Contact type
Insulator position
Connectors with bayonet coupling
Dash
Mo di fica tion
Explanation
Series CA – Circular connectors with bayonet
coupling
Shell style 3100 – Wall mounting receptacle
3101 – Cable connecting plug
3102 – Box mounting receptacle
3105 – Dummy receptacle for front and
panel mounting
3106 – Plug, straight
3108 – Plug, 90°
TBF – Bulkhead receptacle
Class
E–environmental with resilient
insulators and endbell with clamp
and bushing
F–environmental with resilient
insulator and endbell for flex tube
R–environmental with resilient
insulator and shortened light-weight
endbell without cable clamp
PG - PG gland adaptor environmental
ME - Metric gland adaptor environmental*
Shell size 10SL, 12S, 14S, 16S, 16, 18, 20,
22, 24, 28, 32 and 36
Contact
arrangement see page 13
Contact type P–Pin
S–Socket
PS – one side pin, one side socket
(only for TBF)
Insulator position Besides the normal position further insulator
positions are possible for Cannon connec-
tors (see page 31) to prevent mismating.
Polarization is achieved by turning the pin
contact insulator clockwise towards the
shell, the socket insulator, however, in
opposite clockwise direction. This informa-
tion refers to the mating side of the contact
insulator. For special insert alternations of
standard inserts see page 28.
Modification see next page
12 www.ittcannon.com
Dimensions shown in mm
Specifications and dimensions subject to change
Cannon VG/CA-Bayonet
Mo di fi ca tion 01 – metric crimp contacts
(only for CA......-B) 02 – adapter for heat shrink boots
AWG crimp contacts
03 – adapter for heat shrink boots,
metric contacts
04 – rear mount, thread in flange,
metric crimp contacts (CA3102 only)
05 – rear mount, through holes in flange,
(CA3100, CA 3102, rear mounting
CA 20, TBF)
06 – shrink boot adapter, solder pot
contacts
08 – angular endbell, through holes in
flange (for CA3100 only)
09 – angular endbell, through holes in
flange (for CA3100 only)
13 – shielded version, solder contacts
14 – shielded version, metric crimp con-
tacts
15 – shielded version, AWG crimp contacts
32 – shielded endbell, reduced cable entry
diameter
41 – shielded version, grounding spring on
barrel
109 – F80 contacts, rear mount, thread
holes in flange (for CA3102 only)
111 – rear mount, thread holes (CA3102
only), solder contacts
F80 – AWG crimp contacts
A176 – gold plated contact, see pages 58-59
A232 – Zinc cobalt black plating
A233 – Zinc cobalt green plating
A240 – Zinc Nickel plating, blue iridescent
F42 – less grommet and backshell
F0 – less contacts, contacts to be
ordered separately, see pages 58-61
Important!
When connectors are requested according to VG95234
modification, e.g. with another finish, with other contact arrange-
ments and solder contacts, they are to be ordered only with the ITT
Cannon order reference.
Connectors acc. to VG95234 are generally available with insert
positions X and Y only.
VG order reference with modification is not possible.
With Spring Washer and Friction Ring
These connectors feature a spring washer and a friction ring
under the coupling nut.
Advantage Vi bra tio ns are being compensated
Ordering example according performance class insert
„W“ after Class E, F or R
CA06EW – connector with spring washer, endbell
with cable and bushing
CA06FW – connector with spring washer, endbell
for flex tube
CA06RW – connector with spring washer and short
endbell
CA08EW/FW – connector with spring washer and
90° endbell
The connectors acc. to VG95234 are generally delivered with
spring washer.
Other Shell Styles
CA3100E-B-02/03/06 – adapter for heat shrink boot
CA3100F-B-08/09 – 90° endbell for flex tube
CA3100E-B-08/09 – 90° endbell, cable clamp and bushing
CA3100F-B-08/09 – 90° endbell flex tube
CA02L-B – receptacle with pcb solder contacts
CA20L-B – rear mount receptacle with pcb solder
contacts
CA06EH – H stands for FKM insulator and sealing
material. FKM is a high temperature
material good for up to 200°C/392°F
plus an extraordinary performance
against oils of the various nature. (The
full range of end bell styles can be
utilized).
CA07A-B – jam nut receptacle
CA00EP-B-TL – TI NEL- LOCK adap ter, contact factory
CA06EW-B- TLXX – TI NEL- LOCK adap ter, contact factory
13
www.ittcannon.com
Dimensions shown in mm
Specifications and dimensions subject to change
No. Contact arrangement Service Insulator position Po si tion Special Insulator weight
of Contact size rating polarization (g)
Contacts VG CA NVWXY Z including contacts
pin socket
310SL-3 10SL-3 –0––––––– 69
15S 16S A
210SL-4 10SL-4
15S 16S A0––––––– 46
212S-3
– 16S A0100 70 145 215 290 –– 46
112S-4
–16S D0––––––– 34,5
412SA10
– 16S Instr. 0––––– 3 110 68
8 250
314S-1
– 16S A0––––––– 69
414S-2
–16S Instr. 0––120 240 –– – 711
114S-4
– 16S D0––––––– 47
514S-5
– 16S Instr. 0––110 –– – – 9 13
614S-6 14S-6
15S 16S Instr. 0––––– – – 11 15
314S-7
– 16S A0–90 180 270 ––69
214S-9
– 16S Instr. 0–70 145 215 290 –– 518
714SA7
– 16S Instr. 0––––– – – 10 15
716S-1 16S-1
15S 16S A0–80 ––280 ––14 19
216S-4 16S-4
15S 16S D0–35 110 250 325 –– 710
316S-5
– 16S A0–70 145 215 290 –– 812
516S-8
– 16S A0––170 265 –– – 10 15
Cannon VG/CA-Bayonet
View on Mating
face of Pin Insulator
Attention: for all alternate positions of these contact arrangements a tendency to overmate can be stated.
It is within the customer’s responsibility to use these insert positions.
Contact Arrangements
14 www.ittcannon.com
Dimensions shown in mm
Specifications and dimensions subject to change
No. Contact arrangement Service Insulator position Po si tion Special Insulator weight
of Contact size rating polarization (g)
Contacts VG CA NVWXY Z including contacts
pin socket
316-7 16-7
215 16 A0–80 110 250 280 ––16 25
1 100 8
416-9
2– 12 A0–35 110 250 325 ––13 20
2 16
316-10 16-10
25 12 A0–90 180 270 –– – 17 24
216-11
–12 A0–35 110 250 325 ––11 17
116-12 16-12
160 4A 0–––––– – 24 28
216A11 16A11
25 (socket) 12 A0–35 110 250 325 ––11 17
25A (pin) short
10 18-1 18-1 A (B, C,
15 16 F, G) 0–70 145 215* 290 ––24 37
Instr.
(all others)
218-3
–12 D0–35 110 250 325 ––13 22
418-4
– 16 D0–35 110 250 325 ––19 30
318-5
2– 12 D0–80 110 250 280 ––15 25
1 16
118-6
–4D0–––––––24 32
118-7
–8D0–––––––16 25
818-8
1– 12 A0–70 ––290 ––18 30
7 16
7 8-9 18-9
2 25 12 Instr. 0–80 110 250 280 ––18 30
55 16
4– 18-10 A0––120 240 –– – 13 22
12
518-11 18-11 A0––170 265 –– – 31 40
25 12
Cannon VG/CA-Bayonet
View on Mating
face of Pin Insulator
Attention: for all alternate positions of these contact arrangements a tendency to overmate can be stated.
It is within the customer’s responsibility to use these insert positions.
*No good coding; mates with “0” positive easily.
15
www.ittcannon.com
Dimensions shown in mm
Specifications and dimensions subject to change
No. Contact arrangement Service Insulator position Po si tion Special Insulator weight
of Contact size rating polarization (g)
Contacts VG CA NVWXY Z including contacts
pin socket
6– 18-12 A0–80 ––280 ––15 25
16
418-13 18-13
160 8A 0–80 110 250 280 ––15 24
325 12
718-17
2– 12 Instr. 0––––– 12 100 15 23
5 16
10 – 18-19 A0––120 240 –– – 19 31
16
5– 18-20 A0–90 180 270 ––15 25
16
3– 18-21 A0–––––– –17 28
12
3–18-22 D0–70 145 215 290 ––10 20
16
120-2 20-2 D0–––––– –46 55
500 0
320-3
– 12 D0–70 145 215 290 ––28 42
4– 20-4 D0–45 110 250 –– 250 24 40
12 (20A37)
3– 20-6 D0–––––– –22 36
16
820-7 A (C, D,
– 16 E, F) 0–80 110 250 280 ––28 42
D (A, B,
H, G)
620-8 20-8
2 100 8 In str. 0–80 110 250 280 ––37 49
4 15 16
13 – 20-11 In str. 0––––– – – 25 41
16
Cannon VG/CA-Bayonet
View on Mating
face of Pin Insulator
Attention: for all alternate positions of these contact arrangements a tendency to overmate can be stated.
It is within the customer’s responsibility to use these insert positions.
16 www.ittcannon.com
Dimensions shown in mm
Specifications and dimensions subject to change
No. Contact arrangement Service Insulator position Po si tion Special Insulator weight
of Contact size rating polarization (g)
Contacts VG CA NVWXY Z including contacts
pin socket
5– 20-14 A0–80 110 250 280 ––22 39
3– 12
28
7– 20-15 A0–80 ––280 ––27 46
12
920-16
2– 12 A0–80 110 250 280 ––19 32
7 16
620-17
5– 12 A0–90 180 270 –– – 20 33
116
920-18
3– 12 A––35 110 250 325 ––19 32
616
3– 20-19 A0–90 180 270 –– – 33 46
8
6– 20-22
38A––80 110 250 280 ––37 49
3 16
220-23
–8A––35 110 250 325 ––25 35
4– 20-24 A0–35 110 250 325 ––40 53
28
2 16
14 – 20-27 A0–35 110 250 325 ––26 42
16
17 – 20-29 A0–80 ––280 ––29 47
16
Cannon VG/CA-Bayonet
View on Mating
face of Pin Insulator
Attention: for all alternate positions of these contact arrangements a tendency to overmate can be stated.
It is within the customer’s responsibility to use these insert positions.
17
www.ittcannon.com
Dimensions shown in mm
Specifications and dimensions subject to change
No. Contact arrangement Service Insulator position Po si tion Special Insulator weight
of Contact size rating polarization (g)
Contacts VG CA NVWXY Z including contacts
pin socket
11 – 20-33 A0––––2260 – 23 38
16 3 110
17 130
920A9 20A9 D (J)
25 12 Instr. 0––110 250 –– – 21 35
(all others)
19 20A48 20A48 Instr. 0––80 280 –– – 30 50
15 16
2– 22-1 D0–35 110 250 325 ––28 42
8
322-2 22-2 D0–70 145 215 290 ––35 50
88
422-4
2– 8 A ––35 110 250 325 ––34 48
2 12
622-5
2– 12 D––35 110 250 325 ––23 38
4 16
122-7
–0E0–––––––45 57
2– 22-8
– 12 E––35 110 250 325 ––18 28
3– 22-9 E0–70 145 215 290 ––21 32
– 12
Cannon VG/CA-Bayonet
View on Mating
face of Pin Insulator
Attention: for all alternate positions of these contact arrangements a tendency to overmate can be stated.
It is within the customer’s responsibility to use these insert positions.
18 www.ittcannon.com
Dimensions shown in mm
Specifications and dimensions subject to change
No. Contact arrangement Service Insulator position Po si tion Special Insulator weight
of Contact size rating polarization (g)
Contacts VG CA NVWXY Z including contacts
pin socket
4– 22-10
–16 E––35 110 250 325 ––17 31
522-12 22-12 D0–80 110 250 280 ––28 42
2100 8
315 16
19 22-14 22-14 A0–80 ––280 ––30 50
15 16
622-15
5 12 A (A, B,
1– 16 C, E, F) 0–80 110 250 280 ––30 50
E (D)
9–22-16 A0–80 110 250 280
3 12 –– – 28 45
6 16
14 – 22-19 A 0 – 80 110 250 280 ––28 47
16
9– 22-20 A 0 – 35 110 250 325 ––22 39
16
3– 22-21 A 0 – 80 110 250 280
2 16 –– – 49 58
10
422-22 22-22 A 0 ––110 250 –– – 42 58
100 8
8 – 22-23 D (H)
12 A (all 0–35 – 250 –– – 34 54
others)
922-27 22-27
1 60 8
A (A to H)
0–80 – 250 280 ––21 34
8 15 16
D (J)
Cannon VG/CA-Bayonet
View on Mating
face of Pin Insulator
Attention: for all alternate positions of these contact arrangements a tendency to overmate can be stated.
It is within the customer’s responsibility to use these insert positions.
19
www.ittcannon.com
Dimensions shown in mm
Specifications and dimensions subject to change
No. Contact arrangement Service Insulator position Po si tion Special Insulator weight
of Contact size rating polarization (g)
Contacts VG CA NVWXY Z including contacts
pin socket
722-28
–12 A––80 ––280 ––33 50
22B22 –A 0––110 250 –
460 ––42 58
7– 24-2 D 0 – 80 ––280 ––33 53
12
424-4
1– 0 D ––80 110 250 280 ––51 63
3 16
1624-5
– 16 A––80 110 250 280 ––30 54
824-6 A
8– 12 (B,C,D,E,F) 0 – 80 110 250 280 ––32 41
16 24-7
2– 12 A 0 – 80 110 250 280 ––45 65
14 16
224-9 24-9 A 0 – 35 110 250 325 ––45 60
44
724-10 24-10 A 0 – 80 ––280 ––65 85
100 8
924-11 24-11
3 100/8 8A 0 – 35 110 250 325 ––55 75
6 25/12 12
Cannon VG/CA-Bayonet
View on Mating
face of Pin Insulator
Attention: for all alternate positions of these contact arrangements a tendency to overmate can be stated.
It is within the customer’s responsibility to use these insert positions.
20 www.ittcannon.com
Dimensions shown in mm
Specifications and dimensions subject to change
No. Contact arrangement Service Insulator position Po si tion Special Insulator weight
of Contact size rating polarization (g)
Contacts VG CA NVWXY Z including contacts
pin socket
524-12 24-12
244A0 – 80 110 250 280 ––60 80
3 12 12
12 – 24-19 A0–––––– –28 47
16
11 24-20
2– 12 D0–80 110 250 280 ––40 60
916
4– 24-22 D0–45 110 250 ––44 61
8
724-27
– 16 E––80 ––280 ––21 37
24 24-28 24-28 Instr. 0–80 110 250 280 ––40 65
15 16
12 – 24A24 A––––––2260 46 71
12 –––––– 4 80
–––––– 9 280
–––––– 12 100
28 24A28
– 16 Instr. ––65 146 235 –– – 42 75
19 24A51 A––––––14 30 60 70
13 16
5 12
18
14 28-2
12 – 16 D––35 110 250 325 ––43 61
2 12
528-5
2– 4 D ––35 110 250 325 ––60 70
2 16
1 12
Cannon VG/CA-Bayonet
View on Mating
face of Pin Insulator
Attention: for all alternate positions of these contact arrangements a tendency to overmate can be stated.
It is within the customer’s responsibility to use these insert positions.
21
www.ittcannon.com
Dimensions shown in mm
Specifications and dimensions subject to change
No. Contact arrangement Service Insulator position Po si tion Special Insulator weight
of Contact size rating polarization (g)
Contacts VG CA NVWXY Z including contacts
pin socket
12 28-9
6– 16 D––80 110 250 280 ––46 65
6 12
728-10
2–4A (= A, B, C, ––80 110 250 280 ––80 91
28D, E, F)
3 12 D (= G)
2228-11 28-11
4 25 12 A0–80 110 250 280 ––65 110
18 15 16
26 – 28-12 A0–90 180 270 –– – 47 77
16
35 – 28-15 A0–80 110 250 280 ––54 90
16
20 28-16 A (A-L)
– 16 D (M, N, P) 0–80 110 250 280 ––41 68
B (R)
10 28-19
6– 16
A (= C, E, G, J, K, L)
––80 110 250 280 ––40 58
4 12
D = A, B
B = H, M
14 28-20 28-20
10 25 12 A0–80 110 250 280 ––65 110
4 15 16
Cannon VG/CA-Bayonet
View on Mating
face of Pin Insulator
Attention: for all alternate positions of these contact arrangements a tendency to overmate can be stated.
It is within the customer’s responsibility to use these insert positions.
22 www.ittcannon.com
Dimensions shown in mm
Specifications and dimensions subject to change
No. Contact arrangement Service Insulator position Po si tion Special Insulator weight
of Contact size rating polarization (g)
Contacts VG CA NVWXY Z including contacts
pin socket
37 28-21 28-21
15 16 A0–80 110 250 280 ––58 93
628-22 28-22
3160/4 4D 0–70 145 215 290 ––80 120
3 15/16 16
All alternating insert position as above are permitted for VG95234 types.
1228-51
– 12 D––80 135 195 –– – 57 77
928A16
4–4A (e) 0––––– 2 260 100 135
5 16 Instr. –––––– 3 110
(all others) –––––– 8 250
–––––– 9 280
43 – 28A51 A0–––––3110 64 107
16 –––––– 4 80
–––––– 8 250
–––––– 9 280
–––––– 12 100
28 28A63 28A63
9 25 12 A 0 ––100 260 –– – 85 135
19 15 16
532-1 32-1
2 500/0 0 E (A) 0–80 110 250 280 ––130 155
3 25/12 12 D (all
others)
232-5
0D 0–35 110 250 325 –– 86 114
Cannon VG/CA-Bayonet
View on Mating
face of Pin Insulator
Attention: for all alternate positions of these contact arrangements a tendency to overmate can be stated.
It is within the customer’s responsibility to use these insert positions.
23
www.ittcannon.com
Dimensions shown in mm
Specifications and dimensions subject to change
No. Contact arrangement Service Insulator position Po si tion Special Insulator weight
of Contact size rating polarization (g)
Contacts VG CA NVWXY Z including contacts
pin socket
23 32-6 32-6
2160/4 4
3 60/8 8A 0–80 110 250 280 ––130 170
2 25/12 12
16 15/16 16
35 32-7 32-7
7 25 12 Instr.
28 15 16 (A, B, U, I.) 0–80 125 235 280 ––110 160
A (all others)
30 32-8
6– 12 A0–80 125 235 280 ––105 155
24 16
1432-9
12 – 16 D0–80 110 250 280 –– 79 130
24
23 32-13
5– 12 D0–80 110 250 280 –– 95 145
18 16
832-15
2– 0 D 0–35 110 250 325 ––140 165
6 12
4– 32-17 D0–45 110 250 –– – 80 116
4
Cannon VG/CA-Bayonet
View on Mating
face of Pin Insulator
Attention: for all alternate positions of these contact arrangements a tendency to overmate can be stated.
It is within the customer’s responsibility to use these insert positions.
24 www.ittcannon.com
Dimensions shown in mm
Specifications and dimensions subject to change
No. Contact arrangement Service Insulator position Po si tion Special Insulator weight
of Contact size rating polarization (g)
Contacts VG CA NVWXY Z including contacts
pin socket
–––––– 2 260
5432A10 –––––– 3 110
– 16 A––80 110 250 280 4 80 89 132
–––––– 8 250
–––––– 9 280
–––––– 12 100
–––––– 2 260
47 – 32A47 –––––– 3 110
16 A––––––480 73 120
–––––– 8 250
–––––– 9 280
–––––– 12 100
55 32A55
16 A––80 110 250 280 ––90 134
6132A69 32A69 Instr. 0 ––110 250 –– – 49 84
20 15 16
41 10 20
Not for through-bulkhead receptacle C1 / C2.
636-3 36-3
3 500/0 0D 0 – 70 145 215 290 ––165 200
3 25/12 12
All alternating insert position as above are permitted for VG95234 type.
436-5 36-5 A 0 ––120 240 –– – 152 181
500/0 0
636-6 36-6
44 4 A 0 – 35 110 250 325 ––155 173
20 0
Cannon VG/CA-Bayonet
View on Mating
face of Pin Insulator
Attention: for all alternate positions of these contact arrangements a tendency to overmate can be stated.
It is within the customer’s responsibility to use these insert positions.
25
www.ittcannon.com
Dimensions shown in mm
Specifications and dimensions subject to change
No. Contact arrangement Service Insulator position Po si tion Special Insulator weight
of Contact size rating polarization (g)
Contacts VG CA NVWXY Z including contacts
pin socket
47 36-7
7– 12 A––80 110 250 280 –– 92 144
40 16
47 36-8
1– 12 A––80 110 250 280 –– 80 132
46 16
31 36-9
14 – 16 A 0 – 80 125 235 280 ––116 159
14 12
28
14
48 36-10 36-10 A 0 – 80 125 235 280 –– 79 133
15 16
16 36-14
5– 8 D 0––––– – – 150 230
5 12
6 16
35 36-15 D (m)
– 16 A (all 0 – 60 125 245 305 –– 70 111
others)
Cannon VG/CA-Bayonet
View on Mating
face of Pin Insulator
Attention: for all alternate positions of these contact arrangements a tendency to overmate can be stated.
It is within the customer’s responsibility to use these insert positions.
26 www.ittcannon.com
Dimensions shown in mm
Specifications and dimensions subject to change
No. Contact arrangement Service Insulator position Po si tion Special Insulator weight
of Contact size rating polarization (g)
Contacts VG CA NVWXY Z including contacts
pin socket
–––––– 2 260
52 – 36A34 –––––– 3 110
16 A––––––480 83 139
–––––– 8 250
–––––– 9 280
–––––– 12 100
–––––– 20 220
8– 36A35
4 16 A––––––2260 172 183
40––––––3110
–––––– 8 250
–––––– 9 280
–––––– 2 260
27 – 36A46 –––––– 3 110
12A––––––480 112 154
–––––– 8 250
–––––– 9 280
–––––– 12 100
39 – 36A98
88 A 0––110 –– – – 160 140
31 16
65 – 36A99
15 16 Instr. ––30 135 –– – – 80 121
50 20*
* reduced contact termination 0,3 mm2
Cannon VG/CA-Bayonet
View on Mating
face of Pin Insulator
Attention: for all alternate positions of these contact arrangements a tendency to overmate can be stated.
It is within the customer’s responsibility to use these insert positions.
27
www.ittcannon.com
Dimensions shown in mm
Specifications and dimensions subject to change
Cannon VG/CA-Bayonet
Alternate Insert Positions
Indicates location of centerline of key or
keyway of shells in fixed normal position.
Insert is rotated as shown by arrow and
letters.
Connectors according to VG95234 are
generally available with insert positions X
and Y only.
Tolerances:
# 10SL-20: ± 2°
# 22-36: ± 1,5°
# 32A69: ± 1°
Pin
Mating face
Normal position
Socket
Mating face
28 www.ittcannon.com
Dimensions shown in mm
Specifications and dimensions subject to change
Cannon VG/CA-Bayonet
Special Insert Alternations
Special insert alternations are marked by positions. The position
number indicates the turning of the contact insert in the direction
of the polarizing key in view of the mating or termination side
of the socket insulator.
Positions
View shows mating side of pin or termination side of socket.
Insert positions are added without hyphen directly behind the
contact type.
Example:
CA3106F32A10P -B-01
2
Position Polarization
2 260°
3 110°
4 80°
5use pos. 3
685°
8 250°
9 280°
11 105°
12 100°
13 use pos. 8
14 30°
15 45°
16 120°
17 130°
18 150°
19 195°
20 220°
21 255°
22 290°
23 165°
24 330°
25 235°
26 125°
Contact Position Contact Polarization
arrangement of arrangement
12SA10 3 12SA10 110°
8 12SA10 250°
18-17 12 18-9 100°
24A24 2 24A24 260°
424A24 80°
9 24A24 280°
12 24A24 100°
32-16 12 32-6 100°
29
www.ittcannon.com
Dimensions shown in mm
Specifications and dimensions subject to change
Cannon VG/CA-Bayonet
Contact No. of Contact size
arrangement contacts 04812 16 20
500 160 100 25 15 10
60
12S4 11
14S4 11
16-12 11
18-6 11
18-7 11
20-2 11
22-7 11
10SL4 22
14S9 22
16S4 22
16-11 22
16A11 22
18-3 22
20-23 22
22-1 22
22-8 22
24-9 22
32-5 22
10SL3 33
14S1 33
14S7 33
16S5 33
16-7 312
16-10 33
18-5 321
18-21 33
18-22 33
20-6 33
20-19 33
22-2 33
22-9 33
22-21 31 2
12SA10 44
14S2 44
16-9 422
18-4 44
18-10 44
18-13 413
20-4 44
20-24 422
22-4 422
22-10 44
22-22 44
22B22 44
24-4 41 3
24-22 44
32-17 44
36-5 44
Contact No. of Contact size
arrangement contacts 04812 16 20
500 160 100 25 15 10
60
14S5 55
16S8 55
18-11 55
18-20 55
22-12 523
24-12 523
28-5 5212
32-1 52 3
14S6 66
18-12 66
20-8 624
20-22 633
22-5 624
22-15 651
28-22 63 3
36-3 63 3
36-6 624
14SA7 77
16S1 77
18-9 725
18-17 725
20-15 77
22-28 77
24-2 77
24-10 77
24-27 77
28-10 7223
18-8 817
20-7 88
22-23 88
32-15 82 6
36A35 84 4
24-6 88
20-169 27
20-18 936
20A9 99
22-16 936
22-20 99
22-27 918
24-11 936
28A16 94 5
18-1 10 10
18-19 10 10
28-19 10 46
20-33 11 11
24-20 11 29
Contact Arrangements
Cannon VG/CA-Bayonet
30 www.ittcannon.com
Dimensions shown in mm
Specifications and dimensions subject to change
30
Contact No. of Contact size
arrangement contacts 04812 16 20
500 160 100 25 15 10
60
24-19 12 12
24A24 12 12
28-9 12 66
28-51 12 12
20-11 13 13
20-27 14 14
22-19 14 14
28-2 14 2 12
28-20 14 10 4
32-9 14 2 12
24-5 16 16
24-7 16 2 14
36-14 16 556
20-29 17 17
20A48 19 19
22-14 19 19
28-16 20 20
28-11 22 4 18
32-6 23 23216
32-13 23 5 18
24-28 24 24
28-12 26 26
36A46 27 27
24A28 28 28
28A63 28 9 19
32-8 30 6 24
36-9 31 1214 14
28-15 35 35
32-7 35 7 28
36-15 35 35
28-21 37 37
36A98 39 8 31
Contact No. of Contact size
arrangement contacts 04812 16 20
500 160 100 25 15 10
60
28A51 43 43
32A47 47 47
36-7 47 7 40
36-8 47 1 46
36-10 48 48
36A34 52 52
32A10 54 54
32A55 55 55
32A69 61 20 41
36A99 65 15 50
Contact Arrangements
31
www.ittcannon.com
Dimensions shown in mm
Specifications and dimensions subject to change
Cannon VG/CA-Bayonet
VG95234 Can non d1d2d3l1l2l3l4Weight1)
Part no. Part no. max. H13 –0,15 ±0,3 +0,4 ±0,2 ±0,3 g max.
VG95234A-10SL CA3102E10SL-**-B 16,2 3,2 18,2 24,7 14,2 2,8 25,4 12
– CA3102E12S-**-B 16,2 3,2 21,4 24,7 14,2 3,2 28,0 15
VG95234A-14S CA3102E14S-**-B 19,2 3,2 24,6 24,7 14,2 3,2 30,0 17
VG95234A-16S CA3102E16S-**-B 22,4 3,2 27,4 24,7 14,2 3,2 32,5 19
VG95234A-16 CA3102E16-**-B 22,4 3,2 27,4 33,8 19,0 3,2 32,5 22
VG95234A-18 CA3102E18-**-B 25,6 3,2 30,8 33,8 19,0 4,0 35,0 28
VG95234A-20 CA3102E20-**-B 29,0 3,2 34,2 33,8 19,0 4,0 38,0 33
VG95234A-22 CA3102E22-**-B 32,2 3,2 37,4 33,8 19,0 4,0 41,0 38
VG95234A-24 CA3102E24-**-B 35,3 3,7 40,9 33,8 20,6 4,0 44,5 46
VG95234A-28 CA3102E28-**-B 41,4 3,7 46,7 33,8 20,6 4,0 50,8 52
VG95234A-32 CA3102E32-**-B 47,8 4,3 53,4 33,8 22,2 4,0 57,0 64
VG95234A-36 CA3102E36-**-B 52,6 4,3 59,6 33,8 22,2 4,0 63,5 80
1) Weight without insulator
Box Mounting Receptacle
VG95234 – Style A
CA 3102E-B and Mo di fi ca tio ns, see page 12
Receptacle for front panel mounting with square flange.
Threaded holes in flange not possible.
CA02L-B designates a receptacle for front panel mounting
with solder pin contacts to solder into printed circuits. All
pattern drawings upon request. For all other dimensions see
above table.
For contact arrangements with #16 and #12 contacts only.
#12 contacts available upon request.
Contact Dimensions
Cannon VG/CA-Bayonet
32 www.ittcannon.com
Dimensions shown in mm
Specifications and dimensions subject to change
Box Mounting Receptacle
VG95234 Style B1 (with threaded holes in flange)
CA3102-B and Modifications, e g -04, -109 or -111
CA3102-B designates a receptacle with square flange
for rear panel mounting.
VG95234 Style B2 (with through holes in flange)
CA3102E-B and Modifications, see page 12
VG95234 Cannon d1d2d3l1l2l3l4Weight1)
Part no. Part no. max. B1 B2 –0,15 ±0,3 +0,4 ±0,2 ±0,3 g max.
H13
VG95234XX-10SL-* CA3102E10SL-*B-*** 16,2 M4 3,2 18,2 24,7 18,2 2,8 25,4 14
–CA3102E12S-*B-*** 16,2 M4 3,2 21,4 24,7 18,2 3,2 28,0 18
VG95234XX-14S-* CA3102E14S-*B-*** 19,2 M4 3,2 24,6 24,7 18,2 3,2 30,0 21
CG95234XX-16S-* CA3102E16S-*B-*** 22,4 M4 3,2 27,4 24,7 18,2 3,2 32,5 22
VG95234XX-16-* CA3102E16-*B-*** 22,4 M4 3,2 27,4 33,8 23,05 3,2 32,5 27
VG95234XX-18-* CA3102E18-*B-*** 25,6 M4 3,2 30,8 33,8 23,05 4,0 35,0 33
VG95234XX-20-* CA3102E20-*B-*** 29,0 M4 3,2 34,2 33,8 23,05 4,0 38,0 37
VG95234XX-22-* CA3102E22-*B-*** 32,2 M4 3,2 37,4 33,8 23,05 4,0 41,0 42
VG95234XX-24-* CA3102E24-*B-*** 35,3 M4 3,7 40,9 33,8 23,05 4,0 44,5 48
VG95234XX-28-* CA3102E28-*B-*** 41,4 M5 3,7 46,7 33,8 24,05 4,0 50,8 58
VG95234XX-32-* CA3102E32-*B-*** 47,8 M5 4,3 53,4 33,8 24,05 4,0 57,0 72
VG95234XX-36-* CA3102E36-*B-*** 54,1 M5 4,3 59,6 33,8 24,05 4,0 63,5 84
1) Weight without insulator
CA20L-B designates a receptacle for rear panel mounting
with solder pin contacts to solder into printed circuits. All
pattern drawings upon request. For all other dimensions see
above table.
For contact arrangements with #16 and #12 contacts only.
#12 contacts available upon request.
Style B2
Mod. -05
33
www.ittcannon.com
Dimensions shown in mm
Specifications and dimensions subject to change
Cannon VG/CA-Bayonet
Thru-Bulkhead Receptacle
VG95234 Style C1 resp. TBF-B (with threaded holes)
VG95234 Style C2 resp TBF-B-05 (with flange through holes)
TBF-B designates a bulkhead receptacle with mounting flange.
Modifications see page 12
VG95234 Cannon d2d2el1l2l3l4Weight1)
Part no. Part no. C1 C2 –0,15 ±0,1 ±0,7 +0,3 ±0,2 ±0,3 g max.
H13
VG95234XX-10SL-* TBF10SL-*B-*** M4 3,2 18,2 18,2 37,5 14,2 2,8 25,4 17
–TBF12S-*B-*** M4 3,2 21,4 20,6 37,5 14,2 3,2 28,0 24
VG95234XX-14S-* TBF14S-*B-*** M4 3,2 24,6 23,0 37,5 14,2 3,2 30,0 29
CG95234XX-16S-* TBF16S-*B-*** M4 3,2 27,4 24,6 37,5 14,2 3,2 32,5 34
VG95234XX-16-* TBF16-*B-*** M4 3,2 27,4 24,6 51,4 19,0 3,2 32,5 41
VG95234XX-18-* TBF18-*B-*** M4 3,2 30,8 27,0 51,4 19,0 4,0 35,0 49
VG95234XX-20-* TBF20-*B-*** M4 3,2 34,2 29,4 51,4 19,0 4,0 38,0 56
VG95234XX-22-* TBF22-*B-*** M4 3,2 37,4 31,8 51,4 19,0 4,0 41,0 61
VG95234XX-24-* TBF24-*B-*** M4 3,7 40,9 34,9 51,4 20,6 4,0 44,5 65
VG95234XX-28-* TBF28-*B-*** M5 3,7 46,7 39,7 51,4 20,6 4,0 50,8 76
VG95234XX-32-* TBF32-*B-*** M5 4,3 53,4 44,5 51,4 22,2 4,0 57,0 92
VG95234XX-36-* TBF36-*B-*** M5 4,3 59,6 49,2 51,4 22,2 4,0 63,5 103
1) Weight without insulator, grommets and contacts.
Straight Plug
CA3106E-B designates a straight plug with endbell,
cable clamp and telescoping bushing
VG95234 Style Dresp.
CA3106E-B and Modifications, see page 12
VG95234 Cannon d1d22) l1l2l3l4Weight1)
Part no. Part no. max. max. max. max. max. max. g max.
VG95234D-10SL-* CA3106E10SL-**B-*** 22,8 6,5 115 55 22,7 22,7 30
CA3106E12S-**B-*** 26,0 6,5 115 55 22,7 22,7 37
VG95234D-14S-* CA3106E14S-**B-*** 29,2 9,0 115 60 27,5 27,5 44
VG95234D-16S-* CA3106E16S-**B-*** 32,0 11,0 115 60 30,0 30,0 54
VG95234D-16-* CA3106E16-**B-*** 32,0 11,0 120 70 30,0 30,0 62
VG95234D-18-* CA3106E18-**B-*** 36,5 14,2 120 75 33,0 33,0 70
VG95234D-20-* CA3106E20-**B-*** 39,9 15,8 120 75 37,5 37,5 85
VG95234D-22-* CA3106E22-**B-*** 43,1 15,8 120 75 37,5 37,5 92
VG95234D-24-* CA3106E24-**B-*** 46,6 21,4 120 90 43,3 43,3 127
VG95234D-28-* CA3106E28-**B-*** 53,4 21,4 120 90 48,0 43,3 154
VG95234D-32-* CA3106E32-**B-*** 60,1 26,7 120 90 55,0 51,7 199
VG95234D-36-* CA3106E36-**B-*** 66,3 31,7 130 100 58,0 58,0 260
1) Weight without insulator, grommets and contacts. 2) For max. cable entry.
Style C2
Socket Pin
Cannon VG/CA-Bayonet
34 www.ittcannon.com
Dimensions shown in mm
Specifications and dimensions subject to change
Plug 90°
VG95234 Style E1 (with flex tube)
CA 3108 F-B and Modifications, see page 9
CA3108E/F designates a plug 90°, which is available
with cable clamp and bushing (E) or with flex tube
termination (F)
VG95234 Style E(with cable clamp and telescoping
bushing)
CA 3108E-B and Modifications, see page 12
VG 95 234 Cannon d3-Thread d1d22) l1l2l3l4l5Weight1)
Part no. Part no. Style E1 max. max. max. max. max. max. g
CA3108F E E1 EEE1
VG95234XX-10SL-* CA3108X10SL-**B-*** 5/8-24NEF-2A 22,8 6,5 45 42 30 100 22,7 9,4 37 27
–CA3108X12S-**B-*** 5/8-24NEF-2A 26,0 6,5 45 42 30 100 22,7 9,4 45 35
VG95234XX-14S-* CA3108X14S-**B-*** 3/4-20UN EF-2A 29,2 9,0 47 42 30 100 27,5 9,4 58 43
VG95234XX-16S-* CA3108X16S-**B-*** 7/8-20UN EF-2A 32,0 11,0 48 45 30 100 30,0 9,4 68 48
VG95234XX-16-* CA3108X16-**B-*** 7/8-20UN EF-2A 32,0 11,0 57 45 30 100 30,0 9,4 78 58
VG95234XX-18-* CA3108X18-**B-*** 1-20UN EF-2A 36,5 14,2 58 53 35 100 33,0 9,4 90 58
VG95234XX-20-* CA3108X20-**B-*** 1 3/16-18UNEF-2A 39,9 15,8 61 53 35 100 37,5 9,4 109 74
VG95234XX-22-* CA3108X22-**B-*** 1 3/16-18UNEF-2A 43,1 15,8 61 53 35 100 37,5 9,4 113 78
VG95234XX-24-* CA3108X24-**B-*** 1 7/16-18UNEF-2A 46,6 21,4 66 58 40 100 43,3 9,4 159 104
VG95234XX-28-* CA3108X28-**B-*** 1 7/16-18UNEF-2A 53,4 21,4 66 58 40 100 43,3 9,4 181 126
VG95234XX-32-* CA3108X32-**B-*** 1 3/4 -18UNS-2A 60,1 26,7 72 66 45 110 51,7 11,0 245 160
VG95234XX-36-* CA3108 36-**B-*** 2 -18UNS-2A 66,3 31,7 75 69 50 110 58,0 12,6 300 190
1) Weight without insulator, grommets and contacts. 2) For max. cable entry.
Straight Plug
VG95234 Style F
CA3101E-B designates a cable connection plug
with cable clamp and and telescoping bushing
CA 3101E-B and Modifications, see page 12
VG95234 Cannon d1d22) d3l1l2l3l4l5l7Weight1)
Part no. Part no. max. -0,15 max. ±0,1 ±0,2 max. ±0,2 max. g max.
VG95234F-10SL-* CA3101E10SL-**B-*** 25,2 6,5 18,2 57 18,2 2,8 120 20,6 22,7 35
– CA3101E12S-**B-*** 27,8 6,5 21,4 57 18,2 3,2 120 23,6 22,7 43
VG95234F-14S-* CA3101E14S-**B-*** 29,8 9,0 24,6 59 18,2 3,2 120 25,4 27,5 50
VG95234F-16S-* CA3101E16S-**B-*** 32,3 11,0 27,4 60 18,2 3,2 120 28,6 30,0 60
VG95234F-16-* CA3101E16-**B-*** 32,3 11,0 27,4 68 23,05 3,2 125 28,6 30,0 65
VG95234F-18-* CA3101E18-**B-*** 34,8 14,2 30,8 72 23,05 4,0 125 31,7 33,0 80
VG95234F-20-* CA3101E20-**B-*** 37,8 15,8 34,2 72 23,05 4,0 125 34,9 37,5 95
VG95234F-22-* CA3101E22-**B-*** 41,1 15,8 37,4 72 23,05 4,0 125 38,1 37,5 105
VG95234F-24-* CA3101E24-**B-*** 44,6 21,4 40,9 78 23,05 4,0 125 41,3 43,3 140
VG95234F-28-* CA3101E28-**B-*** 50,9 21,4 46,7 79 24,05 4,0 125 47,6 43,3 160
VG95234F-32-* CA3101E32-**B-*** 57,1 26,7 53,4 78 24,05 4,0 125 54,0 51,7 205
VG95234F-36*)-* CA3101E36*)-**B-*** 63,6 31,7 59,6 78 24,05 4,0 135 60,6 58,0 270
1) Weight without insulator, grommets and contacts. 2) For max. cable entry.
*) For contact insert 36-5P a support washer is included.
VG/CA
E1/F VG
E
35
www.ittcannon.com
Dimensions shown in mm
Specifications and dimensions subject to change
Straight Plug
VG95234 – Style G
CA3106E-B, -02, -03 or -06 designates a
straight plug with adapter for heat shrinkable boots
CA3106E-B and Modificationes, see page 12
VG95234 Can non d1d2d3d4d5l1l2Weight1)
Part no. Part no. max. ±0,2 ±0,2 max. min. max. ±0,5 g max.
VG95234G-10SL-* CA3106E10SL-**B-*** 22,8 17,0 15,5 13,3 7,7 50 11,7 24
– CA3106E12S-**B-*** 26,0 17,8 15,5 13,3 7,9 50 11,7 35
VG95234G-14S-* CA3106E14S-**B-*** 29,2 20,1 19,1 17,0 10,6 50 11,7 41
VG95234G-16S-* CA3106E16S-**B-*** 32,0 23,5 23,9 21,9 13,5 50 11,7 51
VG95234G-16-* CA3106E16-**B-*** 32,0 23,5 23,9 21,9 13,5 60 11,7 58
VG95234G-18-* CA3106E18-**B-*** 36,5 26,5 23,9 21,9 14,6 60 11,7 65
VG95234G-20-* CA3106E20-**B-*** 39,9 30,2 29,6 26,2 18,7 65 12,7 75
VG95234G-22-* CA3106E22-**B-*** 43,1 33,6 29,6 26,2 20,8 65 12,7 80
VG95234G-24-* CA3106E24-**B-*** 46,6 38,1 37,8 34,5 24,6 65 12,7 95
VG95234G-28-* CA3106E28-**B-*** 53,4 41,4 37,8 34,5 27,0 65 12,7 120
VG95234G-32-* CA3106E32-**B-*** 60,1 48,6 47,8 43,6 33,3 70 15,2 165
VG95234G-36-* CA3106E36-**B-*** 66,3 54,8 47,8 43,6 38,5 80 15,2 180
1) Weight without insulator, grommets and contacts.
Straight Plug
VG95234 Style H
CA3106-F-B designates a straight plug for flex tube
CA3106-B and Modifications, see page 12
VG95234 Cannon d3-Thread d1d2a2) l1l2Weight1)
Part no. Part no. max. max. min. g max.
VG95234H-10SL-* CA3106F10SL-**B-*** 5/8-24NEF-2A 22,8 8,2 50 9,5 21
– CA3106F12S-**B-*** 5/8-24NEF-2A 26,0 8,2 50 9,5 29
VG95234H-14S-* CA3106F14S-**B-*** 3/4-20UN EF-2A 29,2 11,1 50 9,5 33
VG95234H-16S-* CA3106F16S-**B-*** 7/8-20UN EF-2A 32,0 14,3 50 9,5 42
VG95234H-16-* CA3106F16-**B-*** 7/8-20UN EF-2A 32,0 14,3 60 9,5 51
VG95234H-18-* CA3106F18-**B-*** 1-20UN EF-2A 36,5 16,7 60 9,5 59
VG95234H-20-* CA3106F20-**B-*** 1 3/16-18UN EF-2A 39,9 19,8 60 9,5 59
VG96234H-22-* CA3106F22-**B-*** 1 3/16-18UNEF-2A 43,1 19,8 60 9,5 62
VG95234H-24-* CA3106F24-**B-*** 1 7/16-18UNEF-2A 46,6 25,4 65 9,5 84
VG95234H-28-* CA3106F28-**B-*** 1 7/16-18UNEF-2A 53,4 27,0 65 9,5 100
VG95234H-32-* CA3106F32-**B-*** 1 3/4-18UNS-2A 60,1 32,5 65 11,0 116
VG95234H-36-* CA3106F36-**B-*** 2-18UNS-2A 66,3 35,7 80 11,8 142
1) Weight without insulator, grommets and contacts. 2) For max. cable entry.
Cannon VG/CA-Bayonet
Cannon VG/CA-Bayonet
36 www.ittcannon.com
Dimensions shown in mm
Specifications and dimensions subject to change
Wall Mounting Receptacle
for rear mounting
VG95234 Style J1(with threaded holes in flange)
VG95234 Style J2(with through holes in flange)
CA3100E-B and Modifications e g -05
(with through holes)
CA3100E-B designates a wall mounting
receptacle with cable clamp and telescoping
bushing
CA3100E-B and Modifications e g -01, -F80
(for ordered contacts)
VG95234 Cannon d1d21) d3l1l2l3l4l5
Part no. Part no. -0,15 J1 J2 max. +0,4 ±0,2 ±0,3 max.
VG95234*XX-10SL-* CA3100E10SL-**-B-*** 18,2 6,5 M4 3,2 57 18,2 2,8 25,4 120
– CA3100E12S-**-B-*** 21,4 6,5 M4 3,2 57 18,2 3,2 28,0 120
VG95234*XX-14S-* CA3100E14S-**-B-*** 24,6 9,0 M4 3,2 59 18,2 3,2 30,0 120
VG95234*XX-16S-* CA3100E16S-**-B-*** 27,4 11,0 M4 3,2 60 18,2 3,2 32,5 120
VG95234*XX-16-* CA3100E16-**-B-*** 27,4 11,0 M4 3,2 68 23,05 3,2 32,5 125
VG95234*XX-18-* CA3100E18-**-B-*** 30,8 14,2 M4 3,2 72 23,05 4,0 35,0 125
VG95234*XX-20-* CA3100E20-**-B-*** 34,2 15,8 M4 3,2 72 23,05 4,0 38,0 125
VG95234*XX-22-* CA3100E22-**-B-*** 37,4 15,8 M4 3,2 72 23,05 4,0 41,0 125
VG95234*XX-24-* CA3100E24-**-B-*** 40,9 21,4 M4 3,7 78 23,05 4,0 44,5 125
VG95234*XX-28-* CA3100E28-**-B-*** 46,7 21,4 M5 3,7 79 24,05 4,0 50,8 125
VG95234*XX-32-* CA3100E32-**-B-*** 53,4 26,7 M5 4,3 78 24,05 4,0 57,0 125
VG95234*XX-36-* CA3100E36-**-B-*** 59,6 31,7 M5 4,3 78 24,05 4,0 63,5 135
1) For max. cable entry.
Plug 90°, Shielded
VG95234 Style K
CA3108F-B-13, -14 or -15 designates a shielded plug
with 90° endbell for flex tube, grounding spring on the
barrel. No rear accessories to mount cable braid to the
endbell.
CA3108F and Modifications, see page 12
VG96234 Cannon d3-Thread d1l1l2l3Weight1)
Part no. Part no. max. max. max. min. g max.
– CA3108F10SL-**-B-*** 5/8-24UN EF-2A 22,8 45 22 9,4 27
VG95234K-12S-* CA3108F12S-**-B-*** 5/8-24UN EF-2A 26,0 45 22 9,4 35
VG95234K-14S-* CA3108F14S-**-B-*** 3/4-20UN EF-2A 29,2 47 24 9,4 43
VG95234K-16S-* CA3108F16S-**-B-*** 7/8-20UN EF-2A 32,0 48 25 9,4 48
VG95234K-16-* CA3108F16-**-B-*** 7/8-20UN EF-2A 32,0 57 25 9,4 58
VG95234K-18-* CA3108F18-**-B-*** 1-20UN EF-2A 36,5 58 27 9,4 58
VG95234K-20-* CA3108F20-**-B-*** 1 3/16-18UNEF-2A 39,9 61 29 9,4 74
VG95234K-22-* CA3108F22-**-B-*** 1 3/16-18UNEF-2A 43,1 61 30 9,4 78
VG95234K-24-* CA3108F24-**-B-*** 1 7/16-18UNEF-2A 46,6 66 32 9,4 104
VG95234K-28-* CA3108F28-**-B-*** 1 7/16-18UNEF-2A 53,4 66 34 9,4 126
CG95234K-32-* CA3108F32-**-B-*** 1 3/4-18UNS-2A 60,1 72 39,5 11,0 160
VG95234K-36-* CA3108F36-**-B-*** 2-18UNS-2A 66,3 75 45 12,6 190
1) Weight without insulator, grommets and contacts.
37
www.ittcannon.com
Dimensions shown in mm
Specifications and dimensions subject to change
Straight Plug, shielded
VG95234 Style L
CA3106F-B-13, -14 or -15 designates a straight plug
with endbell for flex tube, grounding spring on the barrel.
CA3106F-B and Modifications, see page 12
VG95234 Cannon d3-Thread d1d22) l1l2Weight1)
Part no. Part no. max. min. g max.
VG95234L-10SL-* CA3106F10SL-**-B-*** 5/8-24UN EF-2A 22,8 8,2 50 9,5 21
VG95234L-12S-* CA3106F12S-**-B-*** 5/8-24UN EF-2A 26,0 8,2 50 9,5 29
VG95234L-14S-* CA3106F14S-**-B-*** 3/4-20UN EF-2A 29,2 11,1 50 9,5 33
VG95234L-16S-* CA3106F16S-**-B-*** 7/8-20UN EF-2A 32,0 14,3 50 9,5 42
VG95234L-16-* CA3106F-16-**-B-*** 7/8-20UN EF-2A 32,0 14,3 60 9,5 51
VG95234L-18-* CA3106F-18-**-B-*** 1-20UN EF-2A 36,5 16,7 60 9,5 59
VG95234L-20-* CA3106F-20-**-B-*** 1 3/16-18UNEF-2A 39,9 19,8 60 9,5 58
VG95234L-22-* CA3106F-22-**-B-*** 1 3/16-18UNEF-2A 43,1 19,8 60 9,5 62
VG95234L-24-* CA3106F-24-**-B-*** 1 7/16-18UNEF-2A 46,6 25,4 65 9,5 84
VG95234L-28-* CA3106F-28-**-B-*** 1 7/16-18UNEF-2A 53,4 27,0 65 9,5 100
VG95234L-32-* CA3106F-32-**-B-*** 1 3/4-18UNS-2A 60,1 32,5 65 11,0 116
VG95234L-36-* CA3106F-36-**-B-*** 2-18UNS-2A 66,3 35,7 80 11,8 142
1) Weight without insulator, grommets and contacts. 2) For max. cable entry.
Straight Plug, shielded
VG95234 Style M
CA3106E-B-13, -14 or -15 designates a straight,
shielded plug with endbell for shielded braids, and
heat shrinkable boots, grounding spring on the barrel.
CA3106E-B and Modifications, see page 12
VG95234 Cannon d1d22) d3d4l1l2l3Weight1)
Part no. Part no. max. min. ±0,5 max. max. +1 ±0,5 g max.
VG95234M-10SL-* CA3106E10SL-**-B-*** 22,8 7,7 18,5 16,3 55,0 17,0 7,0 40
– CA3106E12S-**-B-*** 26,0 9,3 20,0 17,0 55,0 17,0 7,0 42
VG95234M-14S-* CA3106E14S-**-B-*** 29,2 10,6 22,0 20,0 55,0 17,0 7,0 45
VG95234M-16S-* CA3106E16S-**-B-*** 32,0 13,5 25,0 23,0 60,0 18,0 8,0 55
VG95234M-16-* CA3106E16-**-B-*** 32,0 13,5 25,0 23,0 70,0 18,0 8,0 65
VG95234M-18-* CA3106E18-**-B-*** 36,5 14,6 28,0 24,5 70,0 18,0 8,0 75
VG95234M-20-* CA3106E20-**-B-*** 39,9 18,5 32,0 28,5 70,0 18,0 10,0 85
VG95234M-22-* CA3106E22-**-B-*** 43,1 20,8 34,0 30,5 70,0 18,0 10,0 100
VG95234M-24-* CA3106E24-**-B-*** 46,6 24,6 38,0 34,5 70,0 18,0 10,0 115
VG95234M-28-* CA3106E28-**-B-*** 53,4 27,0 41,0 37,5 70,0 18,0 10,0 130
VG95234M-32-* CA3106E32-**-B-*** 60,1 33,3 48,0 44,0 70,0 18,0 10,0 170
VG95234M-36-* CA3106E36-**-B-*** 66,3 38,5 55,0 51,0 80,0 18,0 10,0 190
1) Weight without insulator, grommets and contacts. 2) For max. cable entry.
Cannon VG/CA-Bayonet
Cannon VG/CA-Bayonet
38 www.ittcannon.com
Dimensions shown in mm
Specifications and dimensions subject to change
VG95234 Cannon d1d2d3d42) d5el1l2l3l4Weight1)
Part no. Part no. Thread H13 ±0,5 g
-0,15 N1 N2 min. max. ±0,1 max. +0,4 ±0,2 +0,3 max.
VG95234*XX-10SL-* CA3100E10SL-**-B-*** 18,2 M4 3,2 18,5 7,7 16,3 18,2 55 18,2 2,8 25,4 45
VG95234*XX-14S-* CA3100E14S-**-B-*** 24,6 M4 3,2 22,0 10,6 20,0 23,0 58 18,2 3,2 30,0 55
VG95234*XX-16S-* CA3100E16S-**-B-*** 27,4 M4 3,2 25,0 13,5 23,0 24,6 70 18,2 3,2 32,5 65
VG95234*XX-16-* CA3100E16-**-B-*** 27,4 M4 3,2 25,0 13,5 23,0 24,6 70 23,05 3,2 32,5 75
VG95234*XX-18-* CA3100E18-**-B-*** 30,8 M4 3,2 28,0 14,6 24,5 27,0 70 23,05 4,0 35,0 85
VG95234*XX-20-* CA3100E20-**-B-*** 34,2 M4 3,2 32,0 18,5 28,5 29,4 70 23,05 4,0 38,4 95
VG95234*XX-22-* CA3100E22-**-B-*** 37,4 M4 3,2 34,0 20,8 30,5 31,8 70 23,05 4,0 41,0 105
VG95234*XX-24-* CA3100E24-**-B-*** 40,9 M4 3,7 38,0 24,6 34,5 34,9 70 23,05 4,0 44,5 120
VG95234*XX-28-* CA3100E28-**-B-*** 46,7 M5 3,7 41,0 27,0 37,5 39,7 70 24,05 4,0 50,8 150
VG95234*XX-32-* CA3100E32-**-B-*** 53,4 M5 4,3 48,0 33,3 44,0 44,5 75 24,05 4,0 57,0 190
VG95234*XX-36-* CA3100E36-**-B-*** 59,6 M5 4,3 55,0 38,5 51,0 49,2 85 24,05 4,0 63,5 220
1) Weight without insulator, grommets and contacts. 2) For max. cable entry.
Wall Mounting Receptacle
VG95234 Style N1 (with threaded holes in flange)
VG95234 Style N2 (with through holes in flange)
CA3100E-B , -13, -14 or -15, -05-13, -05-14 or -05-15
desi gn ates a shielded receptacle with endbell for
shielding braids, and also for heat shrinkable boots
CA3100E-B and Modifications, see page 12
/Mod.-05
Straight Plug
VG95234 Style R1 (designated as shielded plug)
CA3106E-B, -32-DXX designates
a straight plug, shielded, with endbell for system
cable.
Grounding spring on the barrel.
(DXX means cable entry diameter)
CA3106E-B and Modification, see page 12
VG95234 Cannon d1d3d4d5d6d7l1l2Weight1)
Part no. Part no. g max.
VG95234R1-14S CA3106E14S-**-B-32 29,2 10,0 14,0 M 20x1 21,0 23,5 57 21,0 50
VG95234R1-16S CA3106E16S-**-B-32 32,0 10,0 14,0 M 20x1 21,0 23,5 57 21,0 60
– CA3106E16S-**-B-32-D12 32,0 12,2 16,0 M 22x1 23,0 25,5 57 21,0 60
VG95234R1-18 CA3106E18-**-B-32 36,5 12,2 16,0 M 22x1 23,0 25,5 66 21,0 80
VG95234R1-20 CA3106E20-**-B-32 39,9 13,4 18,0 M 27x1 26,6 30,5 68 21,0 90
– CA3106E20-**-B-32-D19 39,9 19,6 22,6 M 27x1 31,5 35,5 68 21,0 90
VG95234R1-28 CA3106E28-**-B-32 53,4 19,0 26,0 M 35x1 37,6 41,5 76 26,0 135
– CA3106E28-**-B-32-D22 53,4 23,0 26,5 M 35x1 37,6 41,5 76 26,0 135
VG95234R1-32 CA3106E32-**-B-32 60,1 21,0 26,5 M 35x1 37,5 41,5 79 26,0 175
– CA3106E32-**-B-32-D22 60,3 23,0 26,5 M 35x1 37,5 41,5 82 26,0 200
– CA3106E36-**-B-32-D22 66,3 23,0 26,5 M 42x1 37,5 41,5 82 26,0 200
– CA3106E36-**-B-32-D26 66,3 27,0 33,0 M 42x1 45,0 49,7 82 26,0 200
1) Weight without insulator, grommets and contacts.
39
www.ittcannon.com
Dimensions shown in mm
Specifications and dimensions subject to change
VG95234 Cannon d1d2d3d4d5el1l2l3l4l5
Part no. Part no. – 0,15 Thread H13 ±0,3 ±0,1 max. ±0,4 ±0,2 ±0,3 max.
VG95234S1-14S CA3100E14S-**-B-*** 24,6 M4 3,2 21,0 23,5 10,0 23,0 61 18,2 3,2 30,0 21,0
VG95234S1-16S CA3100E16S-**-B-*** 27,4 M4 3,2 21,0 23,5 10,0 24,6 61 18,2 3,2 32,5 21,0
VG95234S1-18 CA3100E18-**-B-*** 30,8 M4 3,2 23,0 25,5 12,2 27,0 70 23,05 4,0 35,0 21,0
VG95234S1-20 CA3100E20-**-B-*** 34,2 M4 3,2 26,6 30,5 13,4 29,4 72 23,05 4,0 38,0 21,0
VG95234S1-28 CA3100E28-**-B-*** 46,7 M5 3,7 37,5 41,5 19,0 39,7 78 24,05 4,0 50,8 26,0
VG95234S1-32 CA3100E32-**-B-*** 53,4 M5 4,3 37,5 41,5 21,0 44,5 81 24,05 4,0 57,0 26,0
Cannon VG/CA-Bayonet
Wall Mounting Receptacle
VG95234 Style S1 (with thread holes in flange)
CA3100E-B, -32, -32-05 designates a wall
mounting receptacle, shielded, with endbell
for system cable acc. MTV 6145-005.
CA3100E-B and Modification, see page 12
Mod. -05
Straight Plug, Shielded with Adapter for
Heat Shrink Boots
VG95234 Style T
CA3106E-B, 02-41, 03-41, 06-41 designates a straight
plug, shielded ground spring on the barrel with endbell for
heat shrink boot.
CA3106E-B and Modification, see page 12
VG95234 Can non d1d2d3d4d5l1l2Weight1)
Part no. Part no. max. ±0,2 ±0,2 max. min. max. ±0,5 g max.
VG95234T-10SL-* CA3106E10SL-**B-*** 22,8 17,0 15,5 13,3 7,7 50 11,7 24
– CA3106E12S-**B-*** 26,0 17,8 15,5 13,3 7,9 50 11,7 35
VG95234T-14S-* CA3106E14S-**B-*** 29,2 20,1 19,1 17,0 10,6 50 11,7 41
VG95234T-16S-* CA3106E16S-**B-*** 32,0 23,5 23,9 21,9 13,5 50 11,7 51
VG95234T-16-* CA3106E16-**B-*** 32,0 23,5 23,9 21,9 13,5 60 11,7 58
VG95234T-18-* CA3106E18-**B-*** 36,5 26,5 23,9 21,9 14,6 60 11,7 65
VG95234T-20-* CA3106E20-**B-*** 39,9 30,2 29,6 26,2 18,7 65 12,7 75
VG95234T-22-* CA3106E22-**B-*** 43,1 33,6 29,6 26,2 20,8 65 12,7 80
VG95234T-24-* CA3106E24-**B-*** 46,6 38,1 37,8 34,5 24,6 65 12,7 95
VG95234T-28-* CA3106E28-**B-*** 53,4 41,4 37,8 34,5 27,0 65 12,7 120
VG95234T-32-* CA3106E32-**B-*** 60,1 48,6 47,8 43,6 33,3 70 15,2 165
VG95234T-36-* CA3106E36-**B-*** 66,3 54,8 47,8 43,6 38,5 80 15,2 180
1) Weight without insulator, grommets and contacts.
Cannon VG/CA-Bayonet
40 www.ittcannon.com
Dimensions shown in mm
Specifications and dimensions subject to change
Wall Mounting Receptacle
VG95234 Style U1 (with threaded holes in flange)
VG95234 Style U2 (with through holes in flange)
CA3100E-B-02-05, -03-05 or -06-05, -02-03 or -06
designates a wall mounting receptacle with adapter
for heat shrinkable boots
CA3100E-B and Modifications, see page 12
VG95234 Cannon d1d2d3d4d5el
1l2l3l4Weight1)
Part no. Part no. -0,15 Thread H13 ±0,2 max. ±0,1 max. +0,4 ±0,2 ±0,3 g max.
VG95234U1-10SL-* CA3100E10SL-**-B-*** 18,2 M4 3,2 15,5 7,7 13,3 18,2 57 18,2 2,8 25,4 35
– CA3100E12S-**-B-*** 21,4 M4 3,2 15,5 7,9 13,3 20,6 57 18,2 3,2 28,0 45
VG95234U1-14S-* CA3100E14S-**-B-*** 24,6 M4 3,2 19,1 10,6 17,0 23,0 57 18,2 3,2 30,0 50
VG95234U1-16S-* CA3100E16S-**-B-*** 27,4 M4 3,2 23,9 13,5 21,9 24,6 57 18,2 3,2 32,5 60
VG95234U1-16-* CA3100E16-**-B-*** 27,4 M4 3,2 23,9 13,5 21,9 24,6 63 23,05 3,2 32,5 65
VG95234U1-18-* CA3100E18-**-B-*** 30,8 M4 3,2 23,9 14,6 21,9 27,0 65 23,05 4,0 35,0 80
VG95234U1-20-* CA3100E20-**-B-*** 34,2 M4 3,2 29,6 18,7 26,2 29,4 68 23,05 4,0 38,0 95
VG95234U1-22-* CA3100E22-**-B-*** 37,4 M4 3,2 29,6 20,8 26,2 31,8 68 23,05 4,0 41,0 105
VG95234U1-24-* CA3100E24-**-B-*** 40,9 M4 3,7 37,8 24,6 34,5 34,9 70 23,05 4,0 44,5 140
VG95234U1-28-* CA3100E28-**-B-*** 46,7 M5 3,7 37,8 27,0 34,5 39,7 71 24,05 4,0 50,8 160
VG95234U1-32-* CA3100E32-**-B-*** 53,4 M5 4,3 47,8 33,3 43,6 44,5 74 24,05 4,0 57,0 205
VG95234U1-36-* CA3100E36-**-B-*** 59,6 M5 4,3 47,8 38,5 43,6 49,2 74 24,05 4,0 63,5 270
1) Weight without insulator, grommets and contacts.
Straight Plug
VG95234 Style V
CA3101E-B, -02, -03 or -06 designates a cable
connection plug with adapter for heat shrinkable boots
CA3101E-B and Modifications, see page 12
VG95234 Cannon d1d22) d3d4d5l1l2l3l4l5Weight1)
Part no. Part no. -0,15 min. ±0,2 max. max. max. +0,4 ±0,2 ±0,5 g max.
VG95234V-10SL-* CA3101E10SL-**-B-*** 18,2 7,7 15,5 25,2 13,3 57 18,2 2,8 11,7 20,6 35
CA3101E12S-**-B-*** 21,4 7,9 15,5 27,8 13,3 57 18,2 3,2 11,7 23,6 45
VG95234V-14S-* CA3101E14S-**-B-*** 24,6 10,6 19,1 29,8 17,0 57 18,2 3,2 11,7 25,4 50
VG95234V-16S-* CA3101E16S-**-B-*** 27,4 13,5 23,9 32,3 21,9 57 18,2 3,2 11,7 28,6 60
VG95234V-16-* CA3101E16-**-B-*** 27,4 13,5 23,9 32,3 21,9 63 23,05 3,2 11,5 28,6 65
VG95234V-18-* CA3101E18-**-B-*** 30,8 14,6 23,9 34,8 21,9 65 23,05 4,0 11,5 31,7 80
VG95234V-20-* CA3101E20-**-B-*** 34,2 18,7 29,6 37,8 26,2 68 23,05 4,0 12,7 34,9 95
VG95234V-22-* CA3101E22-**-B-*** 37,4 20,8 29,6 41,1 26,2 68 23,05 4,0 12,7 38,1 105
VG95234V-24-* CA3101E24-**-B-*** 40,9 24,6 37,8 44,6 34,5 70 23,05 4,0 12,7 41,3 140
VG95234V-28-* CA3101E28-**-B-*** 46,7 27,0 37,8 50,9 34,5 71 24,05 4,0 12,7 47,6 160
VG95234V-32-* CA3101E32-**-B-*** 53,4 33,3 47,8 57,1 43,6 74 24,05 4,0 15,2 54,0 205
VG95234V-36-* CA3101E36-**-B-*** 59,6 38,5 47,8 63,6 43,6 74 24,05 4,0 15,2 60,6 270
1) Weight without insulator, grommets and contacts. 2) For max. cable entry.
41
www.ittcannon.com
Dimensions shown in mm
Specifications and dimensions subject to change
Cannon d1d2d32) el1l2l3l4l5l6l7Weight1)
Part no. -0,15 Thread H13 max. ±0,4 max. +0,4 ±0,2 max. max. max. max. g max.
Mod. Mod.
08 09
CA3100E10SL-**-B-*** 18,2 M4 3,2 6,5 18,2 50 18,2 2,8 25,4 42 22,7 100 50
CA3100E12S-**-B-*** 21,4 M4 3,2 6,5 20,6 50 18,2 3,2 28,0 42 22,7 100 60
CA3100E14S-**-B-*** 24,6 M4 3,2 9,0 23,0 52 18,2 3,2 30,0 42 27,5 100 70
CA3100E16S-**-B-*** 27,4 M4 3,2 11,0 24,6 53 18,2 3,2 32,5 45 30,0 100 80
CA3100E16-**-B-*** 27,4 M4 3,2 11,0 24,6 60 23,05 3,2 32,5 45 30,0 100 90
CA3100E18-**-B-*** 30,8 M4 3,2 14,2 27,0 62 23,05 4,0 35,0 53 33,0 100 100
CA3100E20-**-B-*** 34,2 M4 3,2 15,8 29,4 66 23,05 4,0 38,0 53 37,5 100 120
CA3100E22-**-B-*** 37,4 M4 3,2 15,8 31,8 66 23,05 4,0 41,0 53 37,5 100 130
CA3100E24-**-B-*** 40,9 M4 3,7 21,4 34,9 69 23,05 4,0 44,5 58 43,3 100 170
CA3100E28-**-B-*** 46,7 M5 3,7 21,4 39,7 70 24,05 4,0 50,8 58 43,3 100 200
CA3100E32-**-B-*** 53,4 M5 4,3 26,7 44,5 74 24,05 4,0 57,0 66 51,7 110 265
CA3100E36-**-B-*** 59,6 M5 4,3 31,7 49,2 78 24,05 4,0 63,5 69 58,0 110 325
1) Weight without insulator, grommets and contacts. 2) For max. cable entry.
Cannon VG/CA-Bayonet
Wall Mounting Receptacle
CA3100F-B-08 (Flange with threated holes)
CA3100F-B-09 (Flange with through holes)
CA3100F-B, -08, -09 designates a wall mounting
receptacle with 90° endbell and for protective hose
Modifications see page 12
Cannon d1d2d3el
1l2l3l4l5l6Weight1)
Part no. -0,15 Thread H13 Thread ±0,1 max. +0,4 ±0,2 ±0,3 min. max. g max.
CA3100F10SL-**-B-*** 18,2 M4 3,2 5/8-24UN EF-2A 18,2 50 18,2 2,8 25,4 9,4 30 47
CA3100F12S-**-B-*** 21,4 M4 3,2 5/8-24UN EF-2A 20,6 50 18,2 3,2 28,0 9,4 30 57
CA3100F14S-**-B-*** 24,6 M4 3,2 3/4-20UN EF-2A 23,0 52 18,2 3,2 30,0 9,4 30 57
CA3100F16S-**-B-*** 27,4 M4 3,2 7/8-20UN EF-2A 24,6 53 18,2 3,2 32,5 9,4 30 75
CA3100F16-**-B-*** 27,4 M4 3,2 7/8-20UN EF-2A 24,6 60 23,05 3,2 32,5 9,4 30 85
CA3100F18-**-B-*** 30,8 M4 3,2 1-20UN EF-2A 27,0 62 23,05 4,0 35,0 9,4 35 95
CA3100F20-**-B-*** 34,2 M4 3,2 1 3/16-18UNEF-2A 29,4 66 23,05 4,0 38,0 9,4 35 115
CA3100F22-**-B-*** 37,4 M4 3,2 1 3/16-18UNEF-2A 31,8 66 23,05 4,0 41,0 9,4 35 125
CA3100F24-**-B-*** 40,9 M4 3,7 1 7/16-18UNEF-2A 34,9 69 23,05 4,0 44,5 9,4 40 160
CA3100F28-**-B-*** 46,7 M5 3,7 1 7/16-18UNEF-2A 39,7 70 24,05 4,0 50,8 9,4 40 190
CA3100F32-**-B-*** 53,4 M5 4,3 1 3/4-18UNS-2A 44,5 74 24,05 4,0 57,0 11,0 45 250
CA3100F36-**-B-*** 59,6 M5 4,3 2-18UNS-2A 49,2 78 24,05 4,0 63,5 12,6 50 310
1) Weight without insulator, grommets and contacts.
Mod -09
Wall Mounting Receptacle
CA3100E-B-08 (Flange with threated holes)
CA3100E-B-09 (Flange with through holes)
CA3100E-B-08, -09 designates a wall mounting
receptacle, with 90° endbell, cable clamp and
telescoping bushing.
Modification see page 12
Cannon VG/CA-Bayonet
42 www.ittcannon.com
Dimensions shown in mm
Specifications and dimensions subject to change
Cannon d1d2d32) d4el
1l2l3l4Weight1)
Part no. -0,15 Thread H13 min. max. ±0,1 max. +0,4 ±0,2 ±0,3 g max.
CA3100R10SL-**-B-*** 18,2 M4 3,2 9,6 22,0 18,2 50 18,2 2,8 25,4 40
CA3100R12S-**-B-*** 21,4 M4 3,2 10,3 23,0 20,6 52 18,2 3,2 28,0 50
CA3100R14S-**-B-*** 24,6 M4 3,2 12,4 27,0 23,0 52 18,2 3,2 30,0 60
CA3100R16S-**-B-*** 27,4 M4 3,2 15,4 28,0 24,6 58 18,2 3,2 32,5 70
CA3100R16-**-B-*** 27,4 M4 3,2 15,4 28,0 24,6 58 23,05 3,2 32,5 75
CA3100R18-**-B-*** 30,8 M4 3,2 18,4 31,0 27,0 65 23,05 4,0 35,0 90
CA3100R20-**-B-*** 34,2 M4 3,2 22,0 35,0 29,4 65 23,05 4,0 38,0 110
CA3100R22-**-B-*** 37,4 M4 3,2 24,7 38,0 31,8 65 23,05 4,0 41,0 125
CA3100R24-**-B-*** 40,9 M4 3,7 27,6 42,0 34,9 67 23,05 4,0 44,5 160
CA3100R28-**-B-*** 46,7 M5 3,7 31,6 49,0 39,7 67 24,05 4,0 50,8 190
CA3100R32-**-B-*** 53,4 M5 4,3 38,5 55,0 44,5 67 24,05 4,0 57,0 230
CA3100R36-**-B-*** 59,6 M5 4,3 44,5 62,0 49,2 67 24,05 4,0 63,5 300
1) Weight without insulator, grommets and contacts. 2) For max. cable entry.
Straight Plug
CA3101F-B - designates a cable connection plug
for flex tube
CA3101F-B and Modifications, see page 12
Cannon d1d22) d3d4l1l2l3l4l5Weight1)
Part no. -0,15 min. Thread max. max. +0,4 ±0,2 min. ±0,2 g max.
CA3101F10SL-**-B-*** 18,2 8,2 5/8-24NEF-2A 25,2 52 18,2 2,8 9,5 20,6 35
CA3101F12S-**-B-*** 21,4 8,2 5/8-24NEF-2A 27,8 52 18,2 3,2 9,5 23,6 45
CA3101F14S-**-B-*** 24,6 11,1 3/4-20UN EF-2A 29,8 52 18,2 3,2 9,5 25,4 50
CA3101F16S-**-B-*** 27,4 14,3 7/8-20UN EF-2A 32,3 59 18,2 3,2 9,5 28,6 60
CA3101F16-**-B-*** 27,4 14,3 7/8-20UN EF-2A 32,3 59 23,05 3,2 9,5 28,6 65
CA3101F18-**-B-*** 30,8 16,7 1-20UN EF-2A 34,8 63 23,05 4,0 9,5 31,7 80
CA3101F20-**-B-*** 34,2 19,8 1 3/16-18UNEF-2A 37,8 63 23,05 4,0 9,5 34,9 95
CA3101F22-**-B-*** 37,4 19,8 1 3/16-18UNEF-2A 41,1 66 23,05 4,0 9,5 38,1 105
CA3101F24-**-B-*** 40,9 25,4 1 7/16-18UNEF-2A 44,6 69 23,05 4,0 9,5 41,3 140
CA3101F28-**-B-*** 46,7 27,0 1 7/16-18UNEF-2A 50,9 70 24,05 4,0 9,5 47,6 160
CA3101F32-**-B-*** 53,4 32,5 1 3/4-16UNS-2A 57,1 71 24,05 4,0 11,0 54,0 205
CA3101F36-**-B-*** 59,6 35,7 2-18UNS-2A 63,6 73 24,05 4,0 11,8 60,6 270
1) Weight without insulator, grommets and contacts. 2) For max. cable entry.
Wall Mounting Receptacles
CA3100R-B designates a wall mounting receptacle with
short endbell without cable clamp.
CA3100R-B and Modifications, see page 12
Mod -05
43
www.ittcannon.com
Dimensions shown in mm
Specifications and dimensions subject to change
Cannon VG/CA-Bayonet
Wall Mounting Receptacle
CA3100F-B designates a wall mounting receptacle with
straight endbell and protective hose.
CA3100F-B and Modifications, see page 12
Cannon d1d2d32) d4el1l2l3l4l5Weight1)
Part no. -0,15 Thread +0,2 Thread ±0,1 max. +0,4 ±0,2 ±0,3 min. g max.
CA3100F10SL-**-B-*** 18,2 M4 3,2 8,2 5/8-24NEF-2A 18,2 52 18,2 2,8 25,4 9,5 40
CA3100F12S-**-B-*** 21,4 M4 3,2 8,2 5/8-24NEF-2A 20,6 52 18,2 3,2 28,0 9,5 50
CA3100F14S-**-B-*** 24,5 M4 3,2 11,1 3/4-20UN EF-2A 23,0 52 18,2 3,2 30,0 9,5 60
CA3100F16S-**-B-*** 27,4 M4 3,2 14,3 7/8-20UN EF-2A 24,6 59 18,2 3,2 32,5 9,5 70
CA3100F16-**-B-*** 27,4 M4 3,2 14,3 7/8-20UN EF-2A 24,6 59 23,05 3,2 32,5 9,5 75
CA3100F18-**-B-*** 30,8 M4 3,2 16,7 1-20UN EF-2A 27,0 63 23,05 4,0 35,0 9,5 90
CA3100F20-**-B-*** 34,2 M4 3,2 19,8 1 3/16-18UNEF-2A 29,4 63 23,05 4,0 38,0 9,5 110
CA3100F22-**-B-*** 37,4 M4 3,2 19,8 1 3/16-18UNEF-2A 31,8 66 23,05 4,0 42,0 9,5 125
CA3100F24-**-B-*** 40,9 M4 3,7 25,4 1 7/16-18UNEF-2A 34,9 69 23,05 4,0 44,5 9,5 160
CA3100F28-**-B-*** 46,7 M5 3,7 27,0 1 7/16-18UNEF-2A 39,7 70 24,05 4,0 50,8 9,5 190
CA3100F32-**-B-*** 53,4 M5 4,3 32,5 1 3/4-18UNS-2A 44,5 71 24,05 4,0 57,0 11,0 230
CA3100F36-**-B-*** 59,6 M5 4,3 35,7 2-18UNS-2A 49,2 73 24,05 4,0 63,5 11,8 300
1) Weight without insulator, grommets and contacts. 2) For max. cable entry.
Mod -05
Cannon VG/CA-Bayonet
44 www.ittcannon.com
Dimensions shown in mm
Specifications and dimensions subject to change
Straight Plug
CA3101R-B designates a cable connection plug with
short endbell, without cable clamp
CA3101R-B and Modification, see page 12
Cannon d1d2d3d4l1l2l3l5Weight1)
Part no. -0,15 min. max. max. max. +0,4 ±0,2 ±0,2 g max.
CA3101R10SL-**-B-*** 18,2 9,6 22,0 25,2 50 18,2 2,8 20,6 32
CA3101R12S-**-B-*** 21,4 10,3 23,0 27,8 52 18,2 3,2 23,6 40
CA3101R14S-**-B-*** 24,6 12,4 27,0 29,8 52 18,2 3,2 25,4 47
CA3101R16S-**-B-*** 27,4 15,4 28,0 32,3 58 18,2 3,2 28,6 55
CA3101R16-**-B-*** 27,4 15,4 28,0 32,3 58 23,05 3,2 28,6 60
CA3101R18-**-B-*** 30,8 18,4 31,0 34,8 65 23,05 4,0 31,7 75
CA3101R20-**-B-*** 34,2 22,0 35,0 37,8 65 23,05 4,0 34,9 90
CA3101R22-**-B-*** 37,4 24,7 38,0 41,1 65 23,05 4,0 38,1 100
CA3101R24-**-B-*** 40,9 27,6 42,0 44,6 67 23,05 4,0 41,3 135
CA3101R28-**-B-*** 46,7 31,6 49,0 50,9 67 24,05 4,0 47,6 155
CA3101R32-**-B-*** 53,4 38,5 55,0 57,1 67 24,05 4,0 54,0 200
CA3101R36-**-B-*** 59,6 44,5 62,0 63,6 67 24,05 4,0 60,6 260
1) Weight without insulator, grommets and contacts.
Straight Plug
CA3106R-B designates a straight plug with short endbell,
without cable clamp
CA3106R-B and Modification, see page 12
Cannon d1d21) d3l1Weight
Part no. max. max. max. g max.
CA3106R10SL-**-B-*** 22,8 9,6 22,0 50 27
CA3106R12S-**-B-*** 26,0 10,3 23,0 50 35
CA3106R14S-**-B-*** 29,2 12,4 27,0 50 40
CA3106R16S-**-B-*** 32,0 15,4 28,0 50 50
CA3106R16-**-B-*** 32,0 15,4 28,0 60 57
CA3106R18-**-B-*** 36,5 18,4 31,0 62 65
CA3106R20-**-B-*** 39,9 22,0 35,0 62 80
CA3106R22-**-B-*** 43,1 24,7 38,0 62 87
CA3106R24-**-B-*** 46,6 27,6 42,0 62 120
CA3100R28-**-B-*** 53,4 31,6 49,0 62 150
CA3106R32-**-B-*** 60,1 38,5 55,0 62 190
CA3106R36-**-B-*** 66,3 44,5 62,0 62 250
1) For max. cable entry.
45
www.ittcannon.com
Dimensions shown in mm
Specifications and dimensions subject to change
Cannon VG/CA-Bayonet
Jam Nut Receptacle
CA07A-B
Cannon Part no. d1d2d3 Thread (l1)l2l3l4d4d5d6d7sw d8l5l6l7
CA07A10SL-**B-*** 35,0 18,2 7/8-20UN EF-2A 13,5 12,5 4,0 29,2 22,7 20,9 13,5 31,5 31,8 20,6 3,2 5,0 2,5
CA07A14S-**B-*** 41,3 24,6 1 1/8-18UNEF-2A 13,5 12,5 4,0 29,2 28,8 27,2 17,9 37,9 38,1 26,9 3,2 6,0 2,5
CA07A16S-**B-*** 44,4 27,4 1 1/4-18UNEF-2A 13,5 12,5 4,0 29,2 32,0 30,4 21,1 41,0 41,2 30,1 3,2 6,0 2,5
CA07A16-**B-*** 44,4 27,4 1 1/4-18UNEF-2A 13,5 21,0 4,0 37,7 32,0 30,4 21,1 41,0 41,2 30,1 3,2 6,0 2,5
CA07A18-**B-*** 48,2 30,8 1 3/8-18UNEF-2A 15,0 21,0 5,0 40,0 35,1 33,6 24,2 44,8 45,0 33,3 4,0 7,0 3,0
CA07A20-**B-*** 52,4 34,2 1 1/2-18UNEF-2A 15,0 21,0 5,0 40,0 38,2 36,8 28,2 49,0 49,2 36,5 4,0 7,0 3,0
CA07A22-**B-*** 55,5 37,4 1 5/8-18UNEF-2A 15,0 21,0 5,0 40,0 42,0 39,9 31,4 52,2 52,4 39,6 4,0 7,0 3,0
CA07A24-**B-*** 59,0 40,9 1 3/4-18UNEF-2A 15,0 21,0 5,0 40,0 44,7 43,1 34,5 55,0 55,2 41,2 4,0 7,0 3,0
CA07A28-**B-*** 66,0 46,7 2-18UNEF-2A 15,0 21,0 5,0 40,0 51,1 49,2 40,1 62,0 62,2 47,5 4,0 7,0 3,0
CA07A32-**B-*** 72,0 53,4 2 1/4-16UN-2A 15,0 21,0 5,0 40,0 57,4 55,7 46,5 68,0 68,2 54,1 4,0 7,0 3,0
CA07A36-**B-*** 80,0 59,6 1/2-16UN-2A 15,0 21,0 5,0 40,0 63,8 62,0 51,2 75,0 75,2 60,5 4,0 8,0 3,0
Straight Plug with PG Adapter
CA06PG-B
CA06ME-B
Cannon d1d3d4l1l2l3d2
Part no. PG-Thread
CA06PG10SL-**-B-*** 22,8 18,0 9,7 52 9,5 7,0 PG 9
CA06PG12S-**-B-*** 26,0 18,8 10,4 52 9,5 7,0 PG 9
CA06PG14S-**-B-*** 29,2 22,0 12,5 52 10,0 7,0 PG11
CA06PG16S-**-B-*** 32,0 23,6 15,0 54 10,0 7,0 PG13,5
CA06PG16-**-B-*** 32,0 24,0 15,0 64 10,0 7,0 PG13,5
CA06PG18-**-B-*** 36,5 24,4 17,0 69 11,5 7,5 PG13,5
CA06PG20-**-B-*** 39,9 26,8 17,0 70 11,5 7,5 PG16
CA06PG22-**-B-*** 42,1 26,4 17,0 73 11,5 7,5 PG16
CA06PG24-**-B-*** 46,6 26,8 18,5 74 12,5 7,5 PG16
CA06PG28-**-B-*** 53,4 32,0 18,5 74 12,5 7,5 PG21
CA06PG32-**-B-*** 60,1 40,8 24,0 76 13,5 8,5 PG29
CA06PG36-**-B-*** 66,3 40,8 32,0 87 15,0 9,0 PG29
Cannon d1d3d4l1l2l3d2
Part no. Metric
CA06ME10SL-**-B-*** 22,8 18,0 9,7 52 9,5 7,0 M16 X 1,5
CA06ME12S-**-B-*** 26,0 18,8 10,4 52 9,5 7,0 M16 X 1,5
CA06ME14S-**-B-*** 29,2 22,0 12,5 52 10,0 7,0 M20 X 1,5
CA06ME16S-**-B-*** 32,0 23,6 15,0 54 10,0 7,0 M20 X 1,5
CA06ME16-**-B-*** 32,0 24,0 15,0 64 10,0 7,0 M20 X 1,5
CA06ME18-**-B-*** 36,5 24,4 17,0 69 11,5 7,5 M25 X 1,5
CA06ME20-**-B-*** 39,9 26,8 17,0 70 11,5 7,5 M25 X 1,5
CA06ME22-**-B-*** 42,1 26,4 17,0 73 11,5 7,5 M32 X 1,5
CA06ME24-**-B-*** 46,6 26,8 18,5 74 12,5 7,5 M32 X 1,5
CA06ME28-**-B-*** 53,4 32,0 18,5 74 12,5 7,5 upon request
CA06ME32-**-B-*** 60,1 40,8 24,0 76 13,5 8,5 upon request
CA06ME36-**-B-*** 66,3 40,8 32,0 87 15,0 9,0 upon request
46 www.ittcannon.com
Dimensions shown in mm
Specifications and dimensions subject to change
Coupling Dimensions
for connector style A, B1, B2, C1, C2, F, J1, J2, N1
and N2 resp. CA3100, CA3101, CA3102 and TBF
A = Contact size 10
B = Contact size 15S, 15, 16S, 16
C = Contact size 25, 12
D = Contact size 60, 100, 160, 500, 8.4, 0
E = Contact size 10
F = Contact size 15S, 16S
G = al l others
Shell d1d2d3d4d5l1l2l3l4l5l6l7
size -0,15 +0,3 +0,4 +0,8 min. ±1 ±0,5 ±1 +0,2 +0,4 +0,1
A-1 B±1 C±1 DEFG -0,05
10SL 18,2 11,4 9,7+0,252,75 2,75 14,2 – 2,2 ––12,8 –2–1,8 4,4 6,3
–0,3
12S 21,4 14,2 10,8+0,252,75 2,75 14,2 – 2,2 ––12,8 –2–1,8 5,9 6,3
–0,3
14S 24,6 17,3 13,0+0,252,75 2,75 14,2 – 2,2 ––12,8 –2–1,8 6,9 6,3
–0,3
16S 27,4 20,6 16,1+0,252,75 2,75 14,2 – 2,2 ––12,8 –2–1,8 8,4 6,3
–0,3
16 27,4 20,6 16,1+0,254,65 4,65 19 9,8 6,6 3 2,3 17,6 1,4 – 2,6 1,8 8,4 9,6
–0,3
18 30,8 23,8 18,8±0,4 4,65 4,65 19 9,8 6,6 3 2,3 17,6 1,4 – 2,6 2,0 9,7 9,6
20 34,2 26,9 22,6±0,4 4,65 4,65 19 9,8 6,6 3 2,3 17,6 1,4 – 2,6 2,0 11,7 9,6
22 37,4 30,0 25,1±0,4 4,65 4,65 19 9,8 6,6 3 2,3 17,6 1,4 – 2,6 2,0 12,9 9,6
24 40,9 33,2 28,2±0,4 4,65 4,65 19 9,8 6,6 3 2,3 17,6 1,4 – 2,6 2,0 14,5 9,6
28 46,7 38,8 33,6±0,4 4,65 4,65 19 9,8 6,6 3 2,3 17,6 1,4 – 2,6 2,0 17,3 9,6
32 53,4 45,2 40,0±0,4 4,65 4,65 19 9,8 6,6 3 2,3 17,6 1,4 – 2,6 2,0 20,4 9,6
36 59,6 50,6 45,5±0,4 4,65 4,65 19 9,8 6,6 3 2,3 17,6 1,4 – 2,6 2,0 23,0 9,6
Coupling Dimensions
for connector style D, E, E1, G and H
resp. CA3106 und 3108
A=Contact size 10
B=Contact size 15S, 15, 16S, 16
C=Contact size 25, 12
D=Contact size 60, 100, 160, 500, 8, 4, 0
E=Contact size 10
F=Contact size 15S, 16S
G=al l others
Shell d1d2d3d4d6l1l2l31) l4l5l8l9l10
size -0,15 -0,3 -0,1 ±0,2 ±1 ±0,5 ±1 +0,05 ±1 ±0,5 +0,1
AB CD E F G -0,1 -0,05
10SL 18,2 11,3 9,7+0,25 2,6 10,0+0,3 13,5 – 2,2 –– 12,8 –2–1,6 11,8 14 2,1
–0,3
12S 21,4 14,0 10,8+0,25 2,6 11,4+0,6 13,5 – 2,2 –– 12,8 –2–1,6 11,8 14 2,1
–0,3
14S 24,8 17,1 13,0+0,25 2,6 13,3+0,6 13,5 – 2,2 –– 12,8 –2–1,6 11,8 14 2,1
–0,3
16S 27,6 20,4 16,1+0,25 2,6 16,4+0,6 13,5 – 2,2 –– 12,8 –2–1,6 11,8 14 2,1
–0,3
16 27,6 20,4 16,1+0,25 4,5 16,4+0,6 18,2 9,8 6,6 3 2,3 17,6 1,4 – 2,6 1,6 16,0 18,8 2,1
–0,3
18 31,1 23,6 18,8±0,4 4,5 19,6+0,6 18,2 9,8 6,6 3 2,3 17,6 1,4 – 2,6 1,8 16,0 18,8 2,1
20 34,5 26,7 22,6±0,4 4,5 23,6+0,6 18,2 9,8 6,6 3 2,3 17,6 1,4 – 2,6 1,8 16,0 18,8 2,1
22 37,7 29,8 25,1±0,4 4,5 26,0+0,6 18,2 9,8 6,6 3 2,3 17,6 1,4 – 2,6 1,8 16,0 18,8 2,1
24 41,2 33,0 28,2±0,4 4,5 29,1+0,7 18,2 9,8 6,6 3 2,3 17,6 1,4 – 2,6 1,8 16,8 19,6 2,8
28 47,0 38,6 33,6±0,4 4,5 34,7+0,7 18,2 9,8 6,6 3 2,3 17,6 1,4 – 2,6 1,8 16,8 19,6 2,8
32 53,7 44,9 40,0±0,4 4,5 41,0+0,7 18,2 9,8 6,6 3 2,3 17,6 1,4 – 2,6 1,8 16,8 19,6 2,8
36 59,9 50,3 45,5±0,4 4,5 46,6+0,7 19 9,8 6,6 3 2,3 17,6 1,4 – 2,6 1,8 16,8 19,6 2,8
1) In terminated condition
Cannon VG/CA-Bayonet
47
www.ittcannon.com
Dimensions shown in mm
Specifications and dimensions subject to change
Cannon CA-Bayonet IP69K
General Information
Scope
This specification describes a similar CA-B connector with a sealing degree up to IP69K. This connector is interchangable with the
corresponding types as per MIL-C-5015 and VG95234, as they offer the same mounting dimensions and contact arrangements. These
connectors are without spring washer, friction ring and grommet.
Recommended Method of Mounting
Connector shell is fixed with 4 screws on the housing. In combination with unsiversal endbell and an o-ring between flange receptacle
and wall the connector will reach IP68 sealing (1bar, 16h) and IP69K sealing.
Ratings & Characteristics
Locking Device Bayonet Coupling
Wire Size From 1,5mm2to 2,5mm2
Contact Type Crimp or Solder Contacts
Electric Characteristics In accordance with VG95234 bayonet coupling
Environmental Characteristics In accordance with VG95234 bayonet coupling
Deviance with plating A240: 500h salt spray test with mated pair
Deviance with plating A34: 48h salt spray test
Water tightness for mated IP68 (1bar, 16h) and connector IP69K in combination with universal endbell and o-ring
connector (flange receptacle to wall)
Normative references
DIN EN 61984 (Electrical Connector, safety requirements and tests)
IEC 60068 (Environmental tests)
IEC 60352 (Crimp connection and requirements)
IEC 60512 (Electrical Connector, measuring and test procedure)
IEC 60529 (Specification for degrees of protection provided by enclosures)
VG 95373 (Electromagnetic compatibility)
48 www.ittcannon.com
Dimensions shown in mm
Specifications and dimensions subject to change
Cannon CA-Bayonet IP69K
How to order
Cannon Order reference
CA 06 X H 20 29 S N B—D17-A240
Series
Shell Style
Class
Sealing Material
Shell Size
Contact Arrangement
Contact Type
Insulator Position
Coupling Mechanism
Dash
Mo di fica tion
Cable Sealing Area
Explanation
Series CA
Shell Style 02 = Wall mounting receptacle, front panel mounting
06 = Straight plug, without spring washer, friction ring and grommet
Class X=Universal endbell IP69K
Sealing Material H= FKM sealing
Without = CR-Sealing / weak backed seal: Silicone (Standard)
Shell Sizes Available shell sizes: 10SL, 14S, 18, 20, 22
Contact Arrangement 20-29 = Layout 20-29, 17x contact size 15/16
Contact Type P= Pin, S=Socket
Coupling Mechanism B=Bayonet
Insulator Position See page 27
Modification Please refer the Modification Codes on next page.
Cable Sealing Area D07 = with Universal Endbell (IP69K), straight version: #10SL, #14S, #20 (wire size 4,5 - 7,2mm)
D09 = with Universal Endbell (IP69K), straight version: #14S, #20 (wire size 6,5 - 9,3mm)
D11 = with Universal Endbell (IP69K), straight version: #14S, #18, #20 (wire size 7,0 - 10,3mm)
D13 = with Universal Endbell (IP69K), straight version: #18, #20, #22 (wire size 8,0 - 12,5mm)
D14 = with Universal Endbell (IP69K), straight version: #18, #22 (wire size 11,1 - 14,2mm)
D17 = with Universal Endbell (IP69K), straight version: #20, #22, #28 (wire size 14,5 - 16,6mm)
49
www.ittcannon.com
Dimensions shown in mm
Specifications and dimensions subject to change
Cannon CA-Bayonet IP69K
Mo di fi ca tion 01 – metric crimp contacts
41 – shielded version, grounding spring on
barrel
F80 – AWG crimp contacts
A176 – gold plated contact, see pages 50-51
A232 – Zinc cobalt black plating
A233 – Zinc cobalt green plating
A240 – Zinc Nickel plating, blue iridescent
F0 – less contacts, contacts to be
ordered separately, see pages 51– 52
50 www.ittcannon.com
Dimensions shown in mm
Specifications and dimensions subject to change
Cannon CA-Bayonet IP69K
Current Rating
Current rating tested acc. To VG95234 part 1
General
IP69K in combination with universal endbell and o-ring (flange
receptacle to wall) other styles:
IP67 acc. To DIN 40050 (1 bar / 12 h)
Attention! Longitudinal sealing: The connector is not sealed
against fluids entering throughthe cable, as the sealing lips of
the single wire sealing are pressing against the jacket of the indi-
vidual cables.
Electrical Data (0,3 - 0,6 mm²)
Insulation Resistance
Test acc. To VG95319 part 2, test no. 5.12., test condition
B
Insulation resistance ≥1000 MΩ(standard material)
Test Voltage
Test acc. To VG95319 part 2, test no. 5.13.
Instruments: 1050 Vrms
A: 1600 Vrms
D: 2500 Vrms
Operating Voltage and Connector Usage
Test acc. To VG95328 part 2, test no. 5.28.2.
If connector is used at voltage > 50 Vrms against ground gener-
al safety notes and protective measures acc. To DIN VDE part
410 and IEC 60364-4-41 have to be observed. All touchable
parts have to be entered in these protective measures without
fail. Connectors in equipments must not be separated or mated
under load when used per specification.
Max. Permitted Operating Voltage
DC voltage (U) in V AC voltage (Urms) in V
85 60
Current ratings are minimal values acc. To VG95234. For
effective values refer to customer service.
Contact Resistant
Milivolt test acc. To VG95234 part 2, test no. 5.10.1. and
VG95210 part 37, including 100 mm of cable on each side.
Contact Size Max. Contact Resistance
#10/20 12 mΩ
#15/16 6 mΩ
#25/12 3 mΩ
#60/100/8 1 mΩ
Shielding
Test acc. To VG95234 part 1, test no. 5.11.
Mechanical Characteristics
max min
Coupling Torque at
Opening and Closing 5 Nm 0,7 Nm
Coupling Torque
Designation Material Finish
Shell
Al-alloy According to order
reference
Coupling Nut
Endbell
Cone Ring
Clamping Nut
Clutch Spring
Circlip Spring Steel -
Contact Cu-alloy Silver Plated and
Passivated
Clutch Ring PPS -
Shielding Sleeve PA66
Clamping Ring PBT
Insulator
CR-rubber -
Sealing Ring
Grommet
O-ring
51
www.ittcannon.com
Dimensions shown in mm
Specifications and dimensions subject to change
Cannon CA-Bayonet IP69K
Cable Connecting Plug
Universal Endbell Bayonet
Endbell: Universal Endbell
Shielding: Yes
Sealing (*): IP67, IP68, IP69K
CA01X…
Straight plug for cable connection with universal endbell.
Please pay attention that the diameter of the cable is in the
sealing range ØH.
Part No. ØA ØB C D E ØF G ØH Sealing Range
- 0,15 ± 0,2 + 0,4 ± 0,2 max max ± 0,2 min max
CA01X10SL-**…D07… 18.2 17.9 18.2 2.8 85 25.2 20.6 4.5 - 7.2 mm
CA01X14S-**…D07… 24.6 17.9 18.2 3.2 8729.8 25.4 4.5 - 7.2 mm
CA01X14S-**…D09… 24.6 21.0 18.2 3.2 87 29.8 25.4 6.5 - 9.3 mm
CA01X14S-**…D11… 24.6 24.0 18.2 3.2 87 29.8 25.4 8.0 - 10.3 mm
CA01X18-**…D11… 30.8 24.0 23.05 4.0 93 34.8 31.7 8.0 - 10.3 mm
CA01X18-**…D13… 30.8 27.4 23.05 4.0 9334.8 31.7 9.0 - 12.5 mm
CA01X18-**…D14… 30.8 30.0 23.05 4.0 93 34.8 31.7 11.5 - 14.2 mm
CA01X20-**…D07… 34.2 17.9 23.05 4.0 9637.8 34.9 4.5 - 7.2 mm
CA01X20-**…D09… 34.2 21.0 23.05 4.0 96 37.8 34.9 6.5 - 9.3 mm
CA01X20-**…D11… 34.2 24.0 23.05 4.0 96 37.8 34.9 8.0 - 10.3 mm
CA01X20-**…D13… 34.2 27.4 23.05 4.0 96 37.8 34.9 9.0 - 12.5 mm
CA01X20-**…D17… 34.2 33.6 23.05 4.0 96 37.8 34.9 14.5 - 16.6 mm
CA01X22-**…D13… 37.4 27.4 23.05 4.0 100 41.1 38.1 9.0 - 12.5 mm
CA01X22-**…D14… 37.4 30.0 23.05 4.0 100 41.1 38.1 11.5 - 14.2 mm
CA01X22-**…D17… 37.4 33.6 23.05 4.0 100 41.1 38.1 14.5 - 16.6 mm
CA01X28-**…D17… 37.4 33.6 24.05 4.0 108 50.9 47.6 14.5 - 16.6 mm
(*) Sealing is achieved in mated condition. A receptacle with the suitable sealing grade is needed.
Box Mounting Receptacle
Front Panel Mounting
Endbell: None
Shielding: None
Sealing (*): IP67, IP68, IP69K
CA02X…-B…
Box Mounting Receptacle
Front Panel Mounting
with O-Ring Sealing for IP69K
Part No. A B C D E F G H X / Kontaktgröße
- 0,15 + 0,4 ± 0,2 ± 0,3 max ± 0,1 ± 0,3 H13 15 25 100
CA02X10SL-**-P*-B 18.2 14.2 2.8 24.7 16.2 18.2 25.4 3.2 13.6 - -
CA02X14S-**-P*-B 24.6 14.2 3.2 24.7 19.2 23 30 3.2 13.2 - -
CA02X18-**-P*-B 30.8 19.0 4.0 33.8 25.6 27.0 35.0 3.2 17.1 17.1 18.7
CA02X20-**-P*-B 34.2 19.0 4.0 33.8 29.0 29.4 38.0 3.2 17.1 17.1 18.7
CA02X22-**-P*-B 37.4 19 4.0 33.8 32.2 31.8 41 3.2 17.1 17.1 18.7
CA02X28-**-P*-B 46.7 20.6 4.0 33.8 41.4 39.7 50.8 3.7 15.5 15.5 17.1
(*) Sealing is achieved in mated condition.
Connector Dimensions
52 www.ittcannon.com
Dimensions shown in mm
Specifications and dimensions subject to change
Mating Dimensions
for shell styles K, L and M, shown without coupling nut
Size d8
min.
14S 17,9
16S 21,2
16 21,2
18 24,4
20 27,6
Size d8
min.
22 30,7
24 33,9
28 39,5
32 46,0
36 51,4
Cannon CA-Bayonet IP69K
Straight Plug
Universal Endbell Bayonet
Endbell: Universal Endbell
Shielding: Yes, with Modification Code
Sealing (*): IP67, IP68, IP69K
CA06X…-B…
Straight plug with universal endbell.
Please pay attention that the diameter of the cable is in the
sealing range ØH.
Part No. ØA B ØE ØD Sealing Range
max max ± 0,2 min max
CA06X10SL-**…D07… 22.8 82 17.9 4.5 - 7.2 mm
CA06X14S-**…D07… 29.2 82 17.9 4.5 - 7.2 mm
CA06X14S-**…D09… 29.2 82 21.0 6.5 - 9.3 mm
CA06X14S-**…D11… 29.2 82 24.0 8.0 - 10.3 mm
CA06X18-**…D11… 36.5 88 24.0 8.0 - 10.3 mm
CA06X18-**…D13… 36.5 88 27.4 9.0 - 12.5 mm
CA06X18-**…D14… 36.5 88 30.0 11.5 - 14.2 mm
CA06X20-**…D07… 39.9 92 17.9 4.5 - 7.2 mm
CA06X20-**…D09… 39.9 92 21.0 6.5 - 9.3 mm
CA06X20-**…D11… 39.9 92 24.0 8.0 - 10.3 mm
CA06X20-**…D13… 39.9 92 27.4 9.0 - 12.5 mm
CA06X20-**…D17… 39.9 92 33.6 14.5 - 16.6 mm
CA06X22-**…D13… 43.1 98 27.4 9.0 - 12.5 mm
CA06X22-**…D14… 43.1 98 30.0 11.5 - 14.2 mm
CA06X22-**…D17… 43.1 98 33.6 14.5 - 16.6 mm
CA06X28-**…D17… 53.4 105 33.6 14.5 - 16.6 mm
53
www.ittcannon.com
Dimensions shown in mm
Specifications and dimensions subject to change
Cannon VG/CA-Bayonet
Part no. Protecting cap for
Receptacles Plugs ø A ø B ø D F GH
Shell size Shell size max. -0,2 +0,2 ±0,2 ±0,2 max.
025-8636-005 10S/10SL – 22,8 17,7 19,7 10,7 14,2 15,9
025-8636-006 – 10S/10SL 22,8 10,7 12,9 15,5 17,0 18,7
025-8636-008 – 12S 26,0 13,4 15,8 15,5 17,0 18,7
025-8636-010 12S/12 – 26,0 20,9 22,9 10,7 14,2 15,9
025-8636-016 14S/14 – 29,2 24,1 26,1 10,7 14,2 15,9
025-8636-017 – 14S 29,2 16,5 19,1 15,5 17,0 18,7
025-8636-018 – 14 29,2 16,5 19,1 20,2 21,7 23,4
025-8636-022 – 16S 32,0 19,8 22,4 15,5 17,0 18,7
025-8636-024 – 16 32,0 19,8 22,4 20,2 21,7 23,4
025-8636-025 16S – 32,0 26,9 28,9 10,7 14,2 15,9
025-8636-026 16 – 32,0 26,9 28,9 17,5 19,0 20,7
025-8636-034 18 – 36,5 30,3 32,3 17,5 19,0 20,7
025-8636-036 – 18 36,5 23,0 25,6 20,2 21,7 23,4
025-8636-042 20 – 39,9 33,7 35,7 17,5 19,0 20,7
025-8636-044 – 20 39,9 26,1 28,8 20,2 21,7 23,4
025-8636-048 – 22 43,1 29,2 31,9 20,2 21,7 23,4
025-8636-049 22 – 43,1 36,9 38,9 17,5 19,0 20,7
025-8636-053 24 – 46,6 40,4 42,4 19,1 20,6 22,3
025-8636-054 – 24 46,6 32,4 35,1 20,2 21,7 23,4
025-8636-058 28 – 53,4 46,2 48,2 19,1 20,6 22,3
025-8636-060 – 28 53,4 38,0 40,7 20,2 21,7 23,4
025-8636-061 – 32 60,1 44,3 47,2 20,2 21,7 23,4
025-8636-062 32 – 64,9 52,9 54,9 20,7 22,2 23,9
025-8636-064 36 – 71,1 59,1 60,1 20,7 22,2 23,9
025-8636-065 – 36 66,3 49,7 51,6 20,2 21,7 23,4
Plastic Protecting Caps
Colour: red
(similar to RAL 2003)
54 www.ittcannon.com
Dimensions shown in mm
Specifications and dimensions subject to change
Metal Protecting Caps
for receptacles, shell style
3100, 3101 und 3102
Material: Aluminum alloy
Shell VG95234 Cannon A66 Cannon A232 Cannon A233 Cannon A240 VG95234 Cannon A66 d1d2l1l2 Weight
size Part No. Part No. Part No. Part No. Part No. Part No. Part No. max. +0,6 min. max. g max.
with chain with chain with chain with chain with chain with cord with cord for chain
10SL VG95234KR10SL CA121003-1 CA121003-71 CA121003-121 CA121003-161 VG95234KA10SL CAB81-10SL-D 23,5 4,3 100 20 16
12S CA121003-2 CA121003-72 CA121003-122 CA121003-162 CAB81-12S-D 27 4,3 100 20 17
14S VG95234KR14S CA121003-3 CA121003-73 CA121003-123 CA121003-163 VG95234KA14S CAB81-14S-D 30,6 4,3 100 20 18
16S VG95234KR16S CA121003-4 CA121003-74 CA121003-124 CA121003-164 VG95234KA16S CAB81-16S-D 33 4,3 100 20 16
16 VG95234KR16 CA121003-5 CA121003-75 CA121003-125 CA121003-165 VG95234KA16 CAB81-16-D 33 4,3 113 25 23
18 VG95234KR18 CA121003-6 CA121003-76 CA121003-126 CA121003-166 VG95234KA18 CAB81-18-D 37,5 4,3 113 25 27
20 VG95234KR20 CA121003-7 CA121003-77 CA121003-127 CA121003-167 VG95234KA20 CAB81-20-D 41 4,3 127 25 30
22 VG95234KR22 CA121003-8 CA121003-78 CA121003-128 CA121003-168 VG95234KA22 CAB81-22-D 44 4,3 127 25 33
24 VG95234KR24 CA121003-9 CA121003-79 CA121003-129 CA121003-169 VG95234KA24 CAB81-24-D 47,5 4,3 127 25 37
28 VG95234KR28 CA121003-10 CA121003-80 CA121003-130 CA121003-170 VG95234KA28 CAB81-28-D 54,5 5,5 169 25 42
32 VG95234KR32 CA121003-11 CA121003-81 CA121003-131 CA121003-171 VG95234KA32 CAB81-32-D 61 5,5 169 25 48
38 VG95234KR36 CA121003-12 CA121003-82 CA121003-132 CA121003-172 VG95234KA36 CAB81-36-D 67,5 5,5 169 25 55
Metal Protecting Caps
for plugs, shell style
3106 and 3108
Material: Aluminum alloy
Cannon VG/CA-Bayonet
VG95234 Style KA with cord VG95234 Style KR with chain
VG95234 Style KC with cord VG95234 Style KB with chain
For plating information A66, A232, A233, A240. Please see page 12
If on CAB 81 another plating is desired please add the relevantMod as indicated on page 12
For plating information A66, A232, A233, A240. Please see page 12
If on CAB 80 another plating is desired please add the relevantMod as indicated on page 12
Shell VG95234 Cannon A66 Cannon A232 Cannon A233 Cannon A240 VG95234 Cannon A66 d1d2l1l2 Weight
size Part No. Part No. Part No. Part No. Part No. Part No. Part No. max. +0,6 min. max. g max.
with chain with chain with chain with chain with chain with cord with cord for chain
10SL VG95234KB10SL CA121004-1 CA121004-71 CA121004-121 CA121004-161 VG95234KC10SL CAB80-10SL-D 21 4,3 100 29 19
12S CA121004-2 CA121004-72 CA121004-122 CA121004-162 CAB80-12S-D 24 4,3 100 29 23
14S VG95234KB14S CA121004-3 CA121004-73 CA121004-123 CA121004-163 VG95234KC14S CAB80-14S-D 27,5 4,3 100 29 26
16S VG95234KB16S CA121004-4 CA121004-74 CA121004-124 CA121004-164 VG95234KC16S CAB80-16S-D 30 4,3 100 29 28
16 VG95234KB16 CA121004-5 CA121004-75 CA121004-125 CA121004-165 VG95234KC16 CAB80-16-D 30 4,3 113 37 33
18 VG95234KB18 CA121004-6 CA121004-76 CA121004-126 CA121004-166 VG95234KC18 CAB80-18-D 33,5 4,3 113 37 38
20 VG95234KB20 CA121004-7 CA121004-77 CA121004-127 CA121004-167 VG95234KC20 CAB80-20-D 34 4,3 127 37 43
22 VG95234KB22 CA121004-8 CA121004-78 CA121004-128 CA121004-168 VG95234KC22 CAB80-22-D 40 4,3 127 37 47
24 VG95234KB24 CA121004-9 CA121004-79 CA121004-129 CA121004-169 VG95234KC24 CAB80-24-D 43,5 4,3 127 37 53
28 VG95234KB28 CA121004-10 CA121004-80 CA121004-130 CA121004-170 VG95234KC28 CAB80-28-D 49,5 5,5 169 37 63
32 VG95234KB32 CA121004-11 CA121004-81 CA121004-131 CA121004-171 VG95234KC32 CAB80-32-D 56 5,5 169 37 75
38 VG95234KB36 CA121004-12 CA121004-82 CA121004-132 CA121004-172 VG95234KC36 CAB80-36-D 62,5 5,5 169 37 88
55
www.ittcannon.com
Dimensions shown in mm
Specifications and dimensions subject to change
Accessories
Dummy Receptacles
Front panel mounting (rear side open)
VG95234 Style BOD (Flange with through-holes)
CA3105-B
Shell VG95234 Cannon d1d2l1l2l3l4
size Part no. Part no. –0,15 ±0,2 ±0,3 ±0,1 max. +0,3
10SL VG95234BOD10SL CA3105E10SL-B 18,2 3,2 25,4 18,2 17,5 14,2
12S – CA3105E12S-B 21,4 3,2 28,0 20,6 18,0 14,2
14S VG95234BOD14S CA3105E14S-B 24,6 3,2 30,0 23,0 18,0 14,2
16S VG95234BOD16S CA3105E16S-B 27,4 3,2 32,5 24,6 18,0 14,2
16 VG95234BOD16 CA3105E16-B 27,4 3,2 32,5 24,6 23,5 19,0
18 VG95234BOD18 CA3105E18-B 30,8 3,2 35,0 27,0 23,5 19,0
20 VG95234BOD20 CA3105E20-B 34,2 3,2 38,0 29,4 23,5 19,0
22 VG95234BOD22 CA3105E22-B 37,4 3,2 41,0 31,8 23,5 19,0
24 VG95234BOD24 CA3105E24-B 40,9 3,7 44,5 34,9 25,5 20,6
28 VG95234BOD28 CA3105E28-B 46,7 3,7 50,8 39,7 25,5 20,6
32 VG95234BOD32 CA3105E32-B 53,4 4,3 57,0 44,5 27,0 22,2
36 VG95234BOD36 CA3105E36-B 59,6 4,3 63,5 49,2 27,0 22,2
Dummy Receptacles
Rear panel mounting (rear side closed)
Shell CA3105E-B CA3105E-B-05 d1l1l2l3l4Style A Style B
size Cannon Part no. Cannon Part no. ±0,25 ±0,3 +0,3 d2d2±0,2
with thread with through holes
Style A Style B
10SL 248-8513-000 248-8501-000 18,2 25,4 18,2 21,1 18,3 M4 3,2
12S 248-8514-000 248-8502-000 21,4 28,0 20,6 21,5 18,3 M4 3,2
14S 248-8515-000 248-8503-000 24,6 30,0 23,0 21,5 18,3 M4 3,2
16S 248-8516-000 248-8504-000 27,4 32,5 24,6 21,5 18,3 M4 3,2
16 248-8517-000 248-8505-000 27,4 32,5 24,6 24,8 21,6 M4 3,2
18 248-8518-000 248-8506-000 30,8 35,0 27,0 27,2 23,15 M4 3,2
20s 248-8519-000 248-8507-000 34,2 38,0 29,4 27,2 23,15 M4 3,2
22 248-8520-000 248-8508-000 37,4 41,0 31,8 27,2 23,15 M4 3,2
24 248-8521-000 248-8509-000 40,9 44,5 34,9 27,2 23,15 M4 3,7
28 248-8522-000 248-8510-000 46,7 50,8 39,7 28,2 24,15 M5 3,7
32 248-8523-000 248-8511-000 53,4 57,0 44,5 28,2 24,15 M5 4,4
36 248-8524-000 248-8512-000 59,6 63,5 49,2 28,2 24,15 M5 4,4
56 www.ittcannon.com
Dimensions shown in mm
Specifications and dimensions subject to change
Sealing Rings
for use on the barrel of the plug
Size Part no. d9
10SL 980-8550-000 9,0
12S 980-8551-000 11,5
14S 980-8552-000 14,0
16/16S 980-8553-000 17,0
18 980-8554-000 19,5
20 980-8555-000 22,5
22 980-8556-000 25,4
24 980-8557-000 28,5
28 980-8558-000 34,0
32 980-8559-000 40,0
36 980-8560-000 45,0
Wire Hole Fillers
Are needed in case of none occupied contacts. Contacts have
to be installed while the wire hole fillers are mounted into the
relevant open grommet holes.
Size VG95234 For contact size d1d2l1l2Colour Part no.
Part no. metr. AWG ±0,1 ±0,2 ±0,1 ±0,3
20 VG95234B20 10 2,3 3,0 2,4 9,7 red 225-1000-000
16S VG95234B16S 15S 16S 2,8 3,7 1,5 4,8 nature 225-8510-000
16 VG95234B16 15S/15 16S/16 2,8 3,7 3,2 11,9 blue 225-0017-000
12 VG95234B12 25/25A 12 3,7 4,6 3,2 11,9 yellow 225-0018-000
8 VG95234B08 60/100 855,8 3,2 11,9 white 225-0019-000
4 VG95234B04 160 4 7,6 8,5 3,2 11,9 green 225-8502-000
0 VG95234B00 500 0 12,8 13,5 3,2 11,9 black 225-8503-000
Accessories
57
www.ittcannon.com
Dimensions shown in mm
Specifications and dimensions subject to change
Accessories
Cable Clamps
without telescoping bushing
VG95234 Style KK
VG95234 Former Shell size A-Thread l2d1l1l3Shell-
Part no. Designation MS suitable for max. max. max. max. Weight
connectors g
acc. MS
VG95234KK 4 MS3057- 4A* 10SL, 12S, 5/7-24NEF-2B 10,5 7,9 20,8 22,5 13,2
VG95234KK 6 MS3057- 6A* 14S, 3/4-20UN EF-2B 10,5 11,1 22,4 27,4 18,6
VG95234KK 8 MS3057- 8A* 16S, 16 7/8-20UN EF-2B 10,5 14,2 24,0 29,8 23,6
VG95234KK12 MS3057-10A* 18 1-20UN EF-2B 10,5 15,8 24,0 32,2 27,3
VG95234KK12 MS3057-12A* 20, 22 1 3/16-18NEF-2B 10,5 19,0 24,0 37,4 37,2
VG95234KK16 MS3057-16A* 24, 28 1 7/16-18NEF-2B 10,5 23,7 26,4 43,5 56,3
VG95234KK20 MS3057-20A* 32 1 3/4-18NS-2B 12,0 31,8 28,0 51,7 83,9
VG95234KK24 MS3057-24A* 36 2-18NS-2B 13,7 34,6 29,6 57,8 109,8
* WB = Cable clamp with cable telescoping bushing
Telescoping Bushings
Telescoping bushing (used with MS3057A resp. VG95234KK
cable clamp) keep dirt, oil and dust out of endbell. Taping or
wrapping wires is eliminated since bushing protects wires
guided through clamp. Combinations of two bushings may be
used to decrease inner diameter for improved sealing.
Material: Polychloroprene
Shell VG95234 MS Cannon d1d2d3l Weight
size Part no. Part no. Part no. g
10SL, 12S VG95234KT10SL MS3420-04 012-8552-000 8,0 6,6 9,9 70,0 4
14S VG95234KT14S MS3420-06 012-8554-000 10,9 9,1 12,7 67,0 5
16S, 16 VG95234KT16 MS3420-08 012-0218-000 14,0 11,1 19,0 64,0 6
18 VG95234KT18 MS3420-10 012-0219-000 15,7 14,3 22,0 60,0 4
20, 22 VG95234KT20 MS3420-12 012-0220-000 18,8 15,9 26,9 57,0 7
24 VG95234KT24 MS3420-16 012-8555-000 21,2 16,6 26,9 57,0 13
28 VG95234KT28 MS3420-18 012-8556-000 23,6 21,5 33,3 54,0 13
32 VG95234KT32 MS3420-20 012-8557-000 26,5 21,5 33,3 54,0 26
––012-8558-000 31,5 26,8 40,4 51,0 26
36 VG95234KT32 MS3420-24 012-8558-000 31,5 26,8 40,4 51,0 30
– MS3420-24 012-0223-000 34,7 31,8 46,8 48,0 30
58 www.ittcannon.com
Dimensions shown in mm
Specifications and dimensions subject to change
Gaskets
Thickness of gaskets
made of Alu-Flex “2“ = 0,5 mm
made of Polychloropren “1“ = 1,0 mm
VG95234 Style DA for front panel mounting
VG95234 Style DH for front panel mounting
Size VG95234 Part no. Part no. led
1d2Weight
Part no. Version Version ±0,5 ±0,2 +1 +0,5 g max.
Polychloropen1Alu-Flex2front panel
10SL VG95234 DA 10SL-X 075-8512-000 075-8512-001 25,4 18,2 15,7 4,2 2
12S 075-8513-000 075-8513-001 28,0 20,6 18,9 4,2 2
14S VG95234 DA 14S-X 075-8514-000 075-8514-001 30,0 23,0 22,1 4,2 2
16/16S VG95234 DA 16X 075-8515-000 075-8515-001 32,5 24,6 25,3 4,2 2
18 VG95234 DA 18-X 075-8516-000 075-8516-001 35,0 27,0 28,4 4,2 2
20 VG95234 DA 20-X 075-8517-000 075-8517-001 38,0 29,4 31,6 4,2 2
22 VG95234 DA 22-X 075-8518-000 075-8518-001 41,0 31,8 34,8 4,2 2
24 VG95234 DA 24-X 075-8519-000 075-8519-001 44,5 34,9 38,0 4,2 2
28 VG95234 DA 28-X 075-8520-000 075-8520-001 50,8 39,7 44,3 5,1 2
32 VG95234 DA 32-X 075-8521-000 075-8521-001 57,0 44,5 50,7 5,1 2
36 VG95234 DA 36-X 075-8522-000 075-8522-001 63,5 49,2 57,0 5,1 2
For front panel mounting
Size VG95234 Part no. Part no. led
1d2Weight
Part no. Version Version ±0,5 ±0,2 +1 +0,5 g max.
Polychloropen1Alu-Flex2front panel
10SL VG95234 DH 10SL-X 075-8501-000 075-8501-001 25,4 18,2 18,2 4,2 2
12S 075-8502-000 075-8502-001 28,0 20,6 21,4 4,2 2
14S VG95234 DH 14S-X 075-8503-000 075-8503-001 30,0 23,0 24,6 4,2 2
16/16S VG95234 DH 16X 075-8504-000 075-8504-001 32,5 24,6 27,4 4,2 2
18 VG95234 DH 18-X 075-8505-000 075-8505-001 35,0 27,0 30,8 4,2 2
20 VG95234 DH 20-X 075-8506-000 075-8506-001 38,0 29,4 34,2 4,2 2
22 VG95234 DH 22-X 075-8507-000 075-8507-001 41,0 31,8 37,4 4,2 2
24 VG95234 DH 24-X 075-8508-000 075-8508-001 44,5 34,9 40,9 4,2 2
28 VG95234 DH 28-X 075-8509-000 075-8509-001 50,8 39,7 46,7 5,1 2
32 VG95234 DH 32-X 075-8510-000 075-8510-001 57,0 44,5 53,4 5,1 2
36 VG95234 DH 36-X 075-8511-000 075-8511-001 63,5 49,2 59,6 5,1 2
For rear panel mounting
X = insert “1“ (electrically not conductive) or “2“ (electrically conductive)
Accessories
59
www.ittcannon.com
Dimensions shown in mm
Specifications and dimensions subject to change
Contacts
Standard contacts and
contacts with reduced
termination diameter
Pin contacts
Finish
A36 – 5 µm silver plated and passivated
A176 – 2 µm nickel plated, min. 0,5 µm gold plated
Contacts
Contact VG95234 Wire Part no. with Part no. with d1d4d6d7l1l3
size Part no. size finish finish -0,05 ±0,15 ±0,5 Color
mm2AWG Stan dard: A36 Mod.Co de: A176 Code
silver plated gold plated
10/20 VG95234P10 0,5-1,0 20/18 030-8585-000 030-8585-006 1,04 1,5 -0,05 1,5 +0,05 2,4 -0,05 28,4 4,75 –
VG95234P10-001 0,2-0,4 26/22 030-8585-010 – 1,04 1,5 -0,05 0,9 +0,05 2,4 -0,05 28,4 4,75 blue
15S/16S VG95234P15S 0,75-1,5 18/16 030-8586-000 030-8586-006 1,6 1,75 -0,1 1,75 +0,08 2,75 -0,05 27,4 3,85 –
VG95234P15S-002 0,3-0,6 22/20 330-8744-000 330-8744-006 1,6 1,75 -0,1 1,2 +0,1 2,75 -0,05 27,4 3,85 red
VG95234P15S-001 0,14-0,38 22/26 030-8586-010 – 1,6 1,75 -0,1 0,9 +0,05 2,75 -0,05 27,4 3,85 blue
15/16 VG95234P15 0,75-1,5 18/16 030-8587-000 030-8587-006 1,6 1,75 -0,1 1,75 +0,08 2,75 -0,05 31,4 7,9 –
VG95234P15-002 0,3-0,6 22/20 330-8659-000 330-8659-006 1,6 1,75 -0,1 1,2 +0,1 2,75 -0,05 31,4 7,9 red
VG95234P15-001 0,14-0,38 22/26 030-8587-030 030-8587-036 1,6 1,75 -0,1 0,9 +0,05 2,75 -0,05 31,4 7,9 blue
25/12 VG95234P25 2,0-3,0 14/12 030-8588-000 030-8588-006 2,4 3,3 -0,15 2,5 +0,1 3,8 -0,1 37,0 7,9 –
VG95234P25-001 0,75-1,5 18/16 030-8588-010 030-8588-016 2,4 3,3 -0,15 1,75 +0,08 3,4 -0,1 37,0 7,9 black
4,0 – 030-8588-054 – 2,4 3,3 -0,15 2,8 +0,1 3,8 -0,1 37,0 7,9
60/100/8 VG95234P8 –8 030-8612-000 030-8612-006 3,6 6,25 -0,15 4,55 +0,1 6,8 -0,1 39,6 6,35 –
VG95234P60 6,0 10 030-8589-000 – 3,6 6,25 -0,15 3,5 +0,1 6,8 -0,1 39,6 6,35 yellow
VG95234P100 10,0 – 030-8590-000 – 3,6 6,25 -0,15 4,8 +0,1 6,8 -0,1 39,6 6,35 –
VG95234P60-001 2,0-3,0 14/12 030-8612-010 – 3,6 6,25 -0,15 2,5 +0,05 6,8 -0,1 39,6 6,35 green
160/4 VG95234P4 –4 030-8613-000 – 5,75 9,55 -0,15 7,1 +0,15 9,55 -0,1 39,6 6,35 –
VG95234P160 16,0 – 030-8591-000 – 5,75 9,55 -0,15 6,2 +0,15 9,55 -0,1 39,6 6,35 –
10,0 – 030-8591-020 – 5,75 9,55 -0,15 4,8 +0,1 9,55 -0,1 39,6 6,35 –
VG95234P160-001 –6 030-8613-010 – 5,75 9,55 -0,15 5,7 +0,1 9,55 -0,1 39,6 6,35 brown
500/0 VG95234P0 –0 030-8614-000 – 9,1 13,55 -0,15 11,5 +0,15 14,35 -0,1 41,0 6,35 –
VG95234P500 50,0 – 030-8592-000 – 9,1 13,55 -0,15 10,7 +0,15 14,35 -0,1 41,0 6,35 –
VG95234P500-001 25,0 4 030-8614-010 – 9,1 13,55 -0,15 7,6 +0,15 14,35 -0,1 41,0 6,35 white
VG95234P500-002 35,0 2 030-8614-020 – 9,1 13,55 -0,15 9,1 +0,15 14,35 -0,1 41,0 6,35 grey
16,0 – 030-8614-030 – 9,1 13,55 -0,15 6,2 +0,15 14,35 -0,1 41,0 6,35 –
Size 15S/16S, 15/16, 25/12, 60/100/8, 160/4, 500/0 Size 10/20
60 www.ittcannon.com
Dimensions shown in mm
Specifications and dimensions subject to change
Contacts
Contacts
Stan dard contacts and
contacts with reduced
termination diameter
Socket contacts
Finish
A36 – 5 µm silver plated
and passivated
A176 – 2 µm nickel plated,
min. 0,5 µm gold plated
Contact VG95234 Wire Part no. with Part no. with d1d2d3d5d6l1l3
size Part no. size finish finish +0,05 ±0,2 ±0,1 Color
mm2AWG Stan dard: A36 Mod.Co de A176 Code
silver plated gold plated
10/20 VG95234S10 0,5-1,0 20/18 031-8554-000 031-8554-006 2,0 -0,1 1,07 1,5 -0,05 1,5 +0,05 2,4 -0,05 36,8±0,3 4,75 –
VG95234S10-001 0,2-0,4 26/22 031-8554-010 – 2,0 -0,1 1,07 1,5 -0,05 0,9 +0,05 2,4 -0,05 36,8±0,3 4,75 blue
15S/16S VG95234S15S 0,75-1,5 18/16 031-8555-110 031-8555-115 3,2 -0,15 1,65 1,75 -0,1 1,75 +0,08 2,75 -0,05 29,1 3,9 –
VG95234S15S-002 0,3-0,6 22/20 031-8688-110 031-8688-115 3,2 -0,15 1,65 1,75 -0,1 1,20 +0,1 2,75 -0,05 29,1 3,9 red
VG95234S15S-001 0,14-0,38 22/26 031-8555-130 – 3,2 -0,15 1,65 1,75 -0,1 0,90 +0,05 2,75 -0,05 29,1 3,9 blue
15/16 VG95234S15 0,75-1,5 18/16 031-8556-110 031-8556-115 3,2 -0,15 1,65 1,75 -0,1 1,75 +0,08 2,75 -0,05 37,8 7,9 –
VG95234S15-002 0,3-0,6 22/20 031-8639-120 031-8639-115 3,2 -0,15 1,65 1,75 -0,1 1,2 +0,1 2,75 -0,05 37,8 7,9 red
VG95234S15-001 0,14-0,38 22/26 031-8556-130 – 3,2 -0,15 1,65 1,75 -0,1 0,9 +0,05 2,75 -0,05 37,8 7,9 blue
25/12 VG95234S25 2,0-3,0 14/12 031-8557-000 031-8557-006 4,8 -0,1 2,45 3,3 -0,1 2,5 +0,1 3,8 -0,1 37,0 7,9 –
VG95234S25-001 0,75-1,5 18/16 031-8557-020 031-8557-026 4,8 -0,1 2,45 3,3 -0,1 1,75 +0,08 3,4 -0,1 37,0 7,9 black
4,0 – 031-8557-010 – 4,8 -0,1 2,45 3,3 -0,1 2,8 +0,1 3,8 -0,1 37,0 7,9 –
0,3–0,6 22/20 031-8557-040 – 4,8 -0,1 2,45 3,3 -0,1 1,2 +0,1 2,75 -0,1 37,0 7,9 –
60/100/8 VG95234S8 –8031-8519-000 031-8519-006 6,5 -0,2 3,65 6,25 -0,2 4,55 +0,1 6,8 -0,1 40,1 6,35 –
VG95234S60 6,0 10 031-8558-000 – 6,5 -0,2 3,65 6,25 -0,2 3,5 +0,1 6,8 -0,1 40,1 6,35 yellow
VG95234S100 10,0 – 031-8559-000 – 6,5 -0,2 3,65 6,25 -0,2 4,8 +0,1 6,8 -0,1 40,1 6,35 –
VG95234S60-001 2,0-3,0 14/12 031-8519-010 – 6,5 -0,2 3,65 6,25 -0,2 2,5 +0,05 6,8 -0,1 40,1 6,35 green
160/4 VG95234S4 –4031-8520-000 – 8,6 -0,2 5,8 9,55 -0,2 7,1 +0,15 9,55 -0,1 40,1 6,35 –
VG95234S160 16,0 – 031-8560-000 – 8,6 -0,2 5,8 9,55 -0,2 6,2 +0,15 9,55 -0,1 40,1 6,35 –
10,0 – 031-8560-020 – 8,6 -0,2 5,8 9,55 -0,2 4,8 +0,1 9,55 -0,1 40,1 6,35 –
VG95234S160-001 –6031-8520-010 – 8,6 -0,2 5,8 9,55 -0,2 5,7 +0,15 9,55 -0,1 40,1 6,35 brown
500/0 VG95234S0 –0031-8521-000 – 13,2 -0,2 9,15 13,55 -0,2 11,5 +0,15 14,35 -0,1 41,6 6,35 –
VG95234S500 50,0 – 031-8561-000 – 13,2 -0,2 9,15 13,55 -0,2 10,7 +0,15 14,35 -0,1 41,6 6,35 –
VG95234S500-001 25,0 4 031-8521-010 – 13,2 -0,2 9,15 13,55 -0,2 7,6 +0,15 14,35 -0,1 41,6 6,35 white
VG95234S500-002 35,0 2 031-8521-020 – 13,2 -0,2 9,15 13,55 -0,2 9,1 +0,15 14,35 -0,1 41,6 6,35 grey
16,0 – 031-8521-030 – 13,2 -0,2 9,15 13,55 -0,2 6,2 +0,15 14,35 -0,1 41,6 6,35 –
Size 10/20 Size 25/12
Size 60/100/8, 160/4, 500/0
Size 15S/16S, 15/16
61
www.ittcannon.com
Dimensions shown in mm
Specifications and dimensions subject to change
Dimensions shown in mm
Specifications and dimensions subject to change
Contacts
Tools
For pin and socket contacts according VG95234 and for Cannon contacts with reduced coupling dimensions.
Insertion Tools Insertion Pliers Extraction Tools Guiding Pins for
Socket Contacts
Part No. Order Reference Part No. Order Reference Part No. Order Reference
CIT 20 121086-3009 CIT-F80-20 121086-0098 CET-F80-20 121086-0082
CIT 16 121086-3008 CIT-F80-16 121086-0097 CET-F80-16 121086-0081 27977-16T50
CIT 12 121086-3007 CIT-F80-12 121086-0096 CET-F80-12 121086-0080 27977-12T8
CIT 8 121086-0095 CET-8 121086-0079
CIT 4 121086-0094 CET-4 121086-0078
CIT 0 121086-0093 CET-0 121086-0077
Contact Size Wire size mm2AWG Hand Crimp Tools Order Reference Crimp Locator Order Reference
100,5-1,0 20/18
600325
(mod.TH 452) 121586-0034
0,2-0,4 26/22
15S/16S 0,75-1,5 18/16
0,3-0,6 22/20
0,14-0,38 22/26
15S/16S 0,750-1,5 18/16
M22520-1-01 995-0001-585 600324
(mod.TH 452) 121586-0033
0,3-0,6 22/20
0,14-0,38 22/26
15/16 0,75-1,5 18/16
TH 452 995-0002-052
0,3-0,6 22/20
0,14-0,38 22/26
25/12 2,0-3,0 14/12
0,75-1,5 18/16
4
Hydraulic
Handpump Order Number Electro Hydraulic
Tool Order Number
60/100/8
6
2,0-3,0
8
10
14/12
HPW400U-ITT 121586-5257 HP400EL-ITT 121586-5253
160/4 16
10
4
6
500/0
50
25
35
16
0
-
4
2
-
Socket Pin
Crimp Contacts
Connectors of series CA-COM and CA-COM-B are also available with crimp contacts for AWG wire sizes. In order to wire,
insert and extract these contacts the tools mentioned on this page are needed. All tools have to be ordered separately.
62 www.ittcannon.com
Dimensions shown in mm
Specifications and dimensions subject to change
Contacts
Notes
1. For large series production, semi-automatic crimp machine
Type HACS-IV-MSXX upon request
2. For insertion and extraction of the contacts and for connector assembly,
see Assembly Instructions MIL-C-5015/VG95234
3. Stan dard contacts acc. to MIL-C-5015/VG95234
* Datasheet available upon request
H- Crimp Head
Electro-Hydraulic
Aggregat EHA2 - ITT
Fußschalter /
Footpedal
Version A Version B
H - Crimp Head
Pump Handle with
Reset Function
Handle
Basic - Hydraulic - Electrically driven tool Basic - Hydraulic - Manual Operated tool
Version Description Marking Part Number
A Electro-Hydraulic - Aggregat with footpedal HP400EL-ITT 121586-5253
B Manually operated Hydraulic handtool HPW400U-ITT 121586-5257
Product Line Contact Size Part Number Hex. Diameter Stamped label Cable Size
MS/CA
VG 95234
AWG mm2
60/100/8 121586-5231 5,20 01 8 6/10
160/4 121586-5230 7,25 02 4 16
500/0 121586-5229 11,40 03 0 50
Crimp Dies
Locator MS / CA 121586-5232
Crimp die with locator Crimp die
Locator
63
www.ittcannon.com
Dimensions shown in mm
Specifications and dimensions subject to change
Notes
Part Number Search
Part Number Page Part Number Page
012-0218-000......................57
012-0219-000......................57
012-0220-000......................57
012-0223-000......................57
012-8552-000......................57
012-8554-000......................57
012-8555-000......................57
012-8556-000......................57
012-8557-000......................57
012-8558-000......................57
012-8558-000......................57
025-8636-005......................53
025-8636-006......................53
025-8636-008......................53
025-8636-010......................53
025-8636-016......................53
025-8636-017......................53
025-8636-018......................53
025-8636-022......................53
025-8636-024......................53
025-8636-025......................53
025-8636-026......................53
025-8636-034......................53
025-8636-036......................53
025-8636-042......................53
025-8636-044......................53
025-8636-048......................53
025-8636-049......................53
025-8636-053......................53
025-8636-054......................53
025-8636-058......................53
025-8636-060......................53
025-8636-061......................53
025-8636-062......................53
025-8636-064......................53
025-8636-065......................53
030-8585-000......................59
030-8585-006......................59
030-8585-010......................59
030-8586-000......................59
030-8586-006......................59
030-8586-010......................59
030-8587-000......................59
030-8587-006......................59
030-8587-030......................59
030-8587-036......................59
030-8588-000......................59
030-8588-006......................59
030-8588-010......................59
030-8588-016......................59
030-8588-054......................59
030-8589-000......................59
030-8590-000......................59
030-8591-000......................59
030-8591-020......................59
030-8592-000......................59
030-8612-000......................59
030-8612-006......................59
030-8612-010......................59
030-8613-000......................59
030-8613-010......................59
030-8614-000......................59
030-8614-010......................59
030-8614-020......................59
030-8614-030......................59
031-8519-000......................60
031-8519-006......................60
031-8519-010......................60
031-8520-000......................60
031-8520-010......................60
031-8521-000......................60
031-8521-010......................60
031-8521-020......................60
031-8521-030......................60
031-8554-000......................60
031-8554-006......................60
031-8554-010......................60
031-8555-110......................60
031-8555-115......................60
031-8555-130......................60
031-8556-110......................60
031-8556-115......................60
031-8556-130......................60
031-8557-000......................60
031-8557-006......................60
031-8557-010......................60
031-8557-020......................60
031-8557-026......................60
031-8557-040......................60
031-8558-000......................60
031-8559-000......................60
031-8560-000......................60
031-8560-020......................60
031-8561-000......................60
031-8639-115......................60
031-8639-120......................60
031-8688-110......................60
031-8688-115......................60
075-8501-000......................58
075-8501-001......................58
075-8502-000......................58
075-8502-001......................58
075-8503-000......................58
075-8503-001......................58
075-8504-000......................58
075-8504-001......................58
075-8505-000......................58
075-8505-001......................58
075-8506-000......................58
075-8506-001......................58
075-8507-000......................58
075-8507-001......................58
075-8508-000......................58
075-8508-001......................58
075-8509-000......................58
075-8509-001......................58
075-8510-000......................58
075-8510-001......................58
075-8511-000......................58
075-8511-001......................58
075-8512-000......................58
075-8512-001......................58
075-8513-000......................58
075-8513-001......................58
075-8514-000......................58
075-8514-001......................58
075-8515-000......................58
075-8515-001......................58
075-8516-000......................58
075-8516-001......................58
075-8517-000......................58
075-8517-001......................58
075-8518-000......................58
075-8518-001......................58
075-8519-000......................58
075-8519-001......................58
075-8520-000......................58
075-8520-001......................58
075-8521-000......................58
075-8521-001......................58
075-8522-000......................58
075-8522-001......................58
121586-0033......................61
121586-0034......................61
121586-5229......................62
121586-5230......................62
121586-5231......................62
121586-5232......................62
121586-5253..................61, 62
121586-5257..................61, 62
248-8501-000......................55
248-8502-000......................55
248-8503-000......................55
248-8504-000......................55
248-8505-000......................55
248-8506-000......................55
248-8507-000......................55
248-8508-000......................55
248-8509-000......................55
248-8510-000......................55
248-8511-000......................55
248-8512-000......................55
248-8513-000......................55
248-8514-000......................55
248-8515-000......................55
248-8516-000......................55
248-8517-000......................55
248-8518-000......................55
248-8519-000......................55
248-8520-000......................55
248-8521-000......................55
248-8522-000......................55
248-8523-000......................55
248-8524-000......................55
330-8659-000......................59
330-8659-006......................59
330-8744-000......................59
330-8744-006......................59
600324.................................61
600325.................................61
995-0001-585.......................61
995-02-52.............................61
CA121003-1..........................54
CA121003-10........................54
CA121003-11........................54
CA121003-12........................54
CA121003-121......................54
CA121003-122......................54
CA121003-123......................54
CA121003-124......................54
CA121003-125......................54
CA121003-126......................54
CA121003-127......................54
CA121003-128......................54
CA121003-129......................54
CA121003-130......................54
CA121003-131......................54
CA121003-132......................54
CA121003-161......................54
CA121003-162......................54
CA121003-163......................54
CA121003-164......................54
CA121003-165......................54
CA121003-166......................54
CA121003-167......................54
CA121003-168......................54
CA121003-169......................54
CA121003-170......................54
CA121003-171......................54
CA121003-172......................54
CA121003-2..........................54
CA121003-3..........................54
CA121003-4..........................54
CA121003-5..........................54
CA121003-6..........................54
CA121003-7..........................54
CA121003-71........................54
CA121003-72........................54
CA121003-73........................54
CA121003-74........................54
CA121003-75........................54
CA121003-76........................54
CA121003-77........................54
CA121003-78........................54
CA121003-79........................54
CA121003-8.........................54
CA121003-80.......................54
CA121003-81.......................54
CA121003-82.......................54
CA121003-9.........................54
CA121004-1.........................54
CA121004-10.......................54
CA121004-11.......................54
CA121004-12.......................54
CA121004-121.....................54
CA121004-122.....................54
CA121004-123.....................54
CA121004-124.....................54
CA121004-125.....................54
CA121004-126.....................54
CA121004-127.....................54
CA121004-128.....................54
CA121004-129.....................54
CA121004-130.....................54
CA121004-131.....................54
CA121004-132.....................54
CA121004-161.....................54
CA121004-162.....................54
CA121004-163.....................54
CA121004-164.....................54
CA121004-165.....................54
CA121004-166.....................54
CA121004-167.....................54
CA121004-168.....................54
CA121004-169.....................54
CA121004-170.....................54
CA121004-171.....................54
CA121004-172.....................54
CA121004-2.........................54
CA121004-3.........................54
CA121004-4.........................54
CA121004-5.........................54
CA121004-6.........................54
CA121004-7.........................54
CA121004-71.......................54
CA121004-72.......................54
CA121004-73.......................54
CA121004-74.......................54
CA121004-75.......................54
CA121004-76.......................54
CA121004-77.......................54
CA121004-78.......................54
CA121004-79.......................54
CA121004-8.........................54
CA121004-80.......................54
CA121004-81.......................54
CA121004-82.......................54
CA121004-9.........................54
CA3105E10SL-B....................55
CA3105E12S-B......................55
CA3105E14S-B......................55
CA3105E16-B........................55
CA3105E16S-B......................55
CA3105E18-B........................55
CA3105E20-B........................55
CA3105E22-B........................55
CA3105E24-B........................55
CA3105E28-B........................55
CA3105E32-B........................55
CA3105E36-B........................55
CAB80-10SL-D.......................54
CAB80-12S-D........................54
CAB80-14S-D........................54
CAB80-16-D..........................54
CAB80-16S-D........................54
CAB80-18-D..........................54
CAB80-20-D..........................54
CAB80-22-D..........................54
CAB80-24-D..........................54
CAB80-28-D..........................54
CAB80-32-D.........................54
CAB80-36-D.........................54
CAB81-10SL-D......................54
CAB81-12S-D.......................54
CAB81-14S-D.......................54
CAB81-16-D.........................54
CAB81-16S-D.......................54
CAB81-18-D.........................54
CAB81-20-D.........................54
CAB81-22-D.........................54
CAB81-24-D.........................54
CAB81-28-D.........................54
CAB81-32-D.........................54
CAB81-36-D.........................54
CET-0...................................61
CET-4...................................61
CET-8...................................61
CET-F80-12..........................61
CET-F80-16..........................61
CET-F80-20..........................61
CIT 0....................................61
CIT 12..................................61
CIT 20..................................61
CIT 4....................................61
CIT 8....................................61
CIT-F80-12...........................61
CIT-F80-16...........................61
CIT-F80-20...........................61
CT 16...................................61
HP400EL-ITT....................61, 62
HPW400U-ITT......................61
M22520-1-01......................61
MS3420-04.........................57
MS3420-06.........................57
MS3420-08.........................57
MS3420-10.........................57
MS3420-12.........................57
MS3420-16.........................57
MS3420-18.........................57
MS3420-20.........................57
MS3420-24.........................57
TH 452................................61
VG95234 DA 10SL-X...........58
VG95234 DA 14S-X.............58
VG95234 DA 16X................58
VG95234 DA 18-X...............58
VG95234 DA 20-X...............58
VG95234 DA 22-X...............58
VG95234 DA 24-X...............58
VG95234 DA 28-X...............58
VG95234 DA 32-X...............58
VG95234 DA 36-X...............58
VG95234 DH 14S-X.............58
VG95234 DH 16X................58
VG95234 DH 18-X...............58
VG95234 DH 20-X...............58
VG95234 DH 22-X...............58
VG95234 DH 24-X...............58
VG95234 DH 28-X...............58
VG95234 DH 32-X...............58
VG95234 DH 36-X...............58
VG95234A-10SL..................31
VG95234A-14S....................31
VG95234A-16......................31
VG95234A-16S....................31
VG95234A-18......................31
VG95234A-20......................31
VG95234A-22......................31
VG95234A-24......................31
VG95234A-28......................31
VG95234A-32......................31
VG95234A-36......................31
VG95234B00.......................56
VG95234B04.......................56
VG95234B08.......................56
Part Number Search
Part Number Page Part Number Page Part Number Page
64 www.ittcannon.com
Dimensions shown in mm
Specifications and dimensions subject to change
65
www.ittcannon.com
Dimensions shown in mm
Specifications and dimensions subject to change
Part Number Search
Part Number Page Part Number Page
VG95234B12.......................56
VG95234B16.......................56
VG95234B16S.....................56
VG95234B20.......................56
VG95234BOD10SL...............55
VG95234BOD14S................55
VG95234BOD16..................55
VG95234BOD16S................55
VG95234BOD18..................55
VG95234BOD20..................55
VG95234BOD22..................55
VG95234BOD24..................55
VG95234BOD28..................55
VG95234BOD32..................55
VG95234BOD36..................55
VG95234KA10SL.................54
VG95234KA14S...................54
VG95234KA16.....................54
VG95234KA16S...................54
VG95234KA18.....................54
VG95234KA20.....................54
VG95234KA22.....................54
VG95234KA24.....................54
VG95234KA28.....................54
VG95234KA32.....................54
VG95234KA36.....................54
VG95234KB10SL..................54
VG95234KB14S....................54
VG95234KB16......................54
VG95234KB16S....................54
VG95234KB18......................54
VG95234KB20......................54
VG95234KB22......................54
VG95234KB24......................54
VG95234KB28......................54
VG95234KB32......................54
VG95234KB38......................54
VG95234KC10SL...................54
VG95234KC14S.....................54
VG95234KC16.......................54
VG95234KC16S.....................54
VG95234KC18.......................54
VG95234KC20.......................54
VG95234KC22.......................54
VG95234KC24.......................54
VG95234KC28.......................54
VG95234KC32.......................54
VG95234KC36.......................54
VG95234KK 4........................57
VG95234KK 6........................57
VG95234KK 8........................57
VG95234KK12.......................57
VG95234KK16.......................57
VG95234KK20.......................57
VG95234KK24.......................57
VG95234KR10SL....................54
VG95234KR14S.....................54
VG95234KR16.......................54
VG95234KR16S.....................54
VG95234KR18.......................54
VG95234KR20.......................54
VG95234KR22.......................54
VG95234KR24.......................54
VG95234KR28.......................54
VG95234KR32.......................54
VG95234KR38.......................54
VG95234KT10SL....................57
VG95234KT14S.....................57
VG95234KT16V.....................57
VG95234KT18.......................57
VG95234KT20.......................57
VG95234KT24.......................57
VG95234KT28.......................57
VG95234KT32.......................57
VG95234P0...........................59
VG95234P10........................59
VG95234P100......................59
VG95234P10-001.................59
VG95234P15........................59
VG95234P15-001.................59
VG95234P15-002.................59
VG95234P15S......................59
VG95234P15S-001...............59
VG95234P15S-002...............59
VG95234P160......................59
VG95234P160-001...............59
VG95234P25........................59
VG95234P25-001.................59
VG95234P4..........................59
VG95234P500......................59
VG95234P500-001...............59
VG95234P500-002...............59
VG95234P60........................59
VG95234P60-001.................59
VG95234P8..........................59
VG95234R1-14S...................38
VG95234R1-16S...................38
VG95234R1-18.....................38
VG95234R1-20.....................38
VG95234R1-28.....................38
VG95234R1-32.....................38
VG95234S0..........................60
VG95234S10........................60
VG95234S100......................60
VG95234S10-001.................60
VG95234S1-14.....................39
VG95234S1-16S...................39
VG95234S1-18.....................39
VG95234S1-20.....................39
VG95234S1-28.....................39
VG95234S1-32.....................39
VG95234S15........................60
VG95234S15-001.................60
VG95234S15-002.................60
VG95234S15S......................60
VG95234S15S-001...............60
VG95234S15S-002...............60
VG95234S160......................60
VG95234S160-001...............60
VG95234S25........................60
VG95234S25-001.................60
VG95234S4..........................60
VG95234S500......................60
VG95234S500-001...............60
VG95234S500-002...............60
VG95234S60........................60
VG95234S60-001.................60
VG95234S8..........................60
Part Number Search
66 www.ittcannon.com
THIS NOTE MUST BE READ IN CON-
JUNCTION WITH THE PRODUCT DATA
SHEET/CATALOG. FAILURE TO
OBSERVE THE ADVICE IN THIS INFOR-
MATION SHEET AND THE OPERATING
CONDITIONS SPECIFIED IN THE PROD-
UCT DATA SHEET/ CATALOG COULD
RESULT IN HAZARDOUS SITUATIONS.
1. MATERIAL CONTENT AND PHYSICAL
FORM
Electrical connectors do not usually con-
tain hazardous materials. They contain
conducting and non-conducting materi-
als and can be divided into two groups.
a) Printed circuit types and low cost
audio types which employ all plastic
insulators and casings.
b) Rugged, Fire Barrier and High Reliabil-
ity types with metal casings and either
natural rubber, synthetic rubber, plastic
or glass insulating materials. Contact
materials vary with type of connector and
also application and are usually manu-
factured from either: Copper, copper
alloys, nickel, alumel, chromel or steel. In
special applications, other alloys may be
specified.
2. FIRE CHARACTERISTICS AND ELEC-
TRIC SHOCK HAZARD
There is no fire hazard when the connec-
tor is correctly wired and used within the
specified parameters. Incorrect wiring or
assembly of the connector or careless
use of metal tools or conductive fluids,
or transit damage to any of the compo-
nent parts may cause electric shock or
burns. Live circuits must not be broken
by separating mated connectors as this
may cause arcing, ionization and burn-
ing. Heat dissipation is greater at maxi-
mum resistance in a circuit. Hot spots
may occur when resistance is raised
locally by damage, e.g. cracked or
deformed contacts, broken strands of
wire. Local overheating may also result
from the use of the incorrect application
tools or from poor quality soldering or
slack screw terminals. Overheating may
occur if the ratings in the product Data
Sheet/Catalog are exceeded and can
cause breakdown of insulation and
hence electric shock. If heating is
allowed to continue it intensifies by fur-
ther increasing the local resistance
through loss of temper of spring con-
tacts, formation of oxide film on contacts
and wires and leakage currents through
carbonization of insulation and tracking
paths. Fire can then result in the pres-
ence of combustible materials and this
may release noxious fumes. Overheating
may not be visually apparent. Burns may
result from touching overheated compo-
nents.
3. HANDLING
Care must be taken to avoid damage
to any component parts of electrical con-
nectors during installation and use.
Although there are normally no sharp
edges, care must be taken when handling
certain components to avoid injury to fin-
gers. Electrical connectors may be dam-
aged in transit to the customers, and
damage may result in creation of haz-
ards. Products should therefore be exam-
ined prior to installation/use and rejected
if found to be damaged.
4. DISPOSAL
Incineration of certain materials may
release noxious or even toxic fumes.
5. APPLICATION
Connectors with exposed contacts
should not be selected for use on the
current supply side of an electrical cir-
cuit, because an electric shock could
result from touching exposed contacts
on an unmated connector. Voltages in
excess of 30 V ac or 42.5 V dc are poten-
tially hazardous and care should be
taken to ensure that such voltages can-
not be transmitted in any way to exposed
metal parts of the connector body. The
connector and wiring should be checked,
before making live, to have no damage to
metal parts or insulators, no solder
blobs, loose strands, conducting lubri-
cants, swarf, or any other undesired con-
ducting particles. Circuit resistance and
continuity check should be made to
make certain that there are no high resis-
tance joints or spurious conducting
paths. Always use the correct application
tools as specified in the Data Sheet/Cata-
log. Do not permit untrained personnel to
wire, assemble or tamper with connec-
tors. For operation voltage please see
appropriate national regulations.
IMPORTANT GENERAL INFORMATION
(i) Air and creepage paths/Operating volt-
age. The admissible operating voltages
depend on the individual applications
and the valid national and other applica-
ble safety regulations.
For this reason the air and creepage path
data are only reference values. Observe
reduction of air and creepage paths due
to PC board and/or harnessing.
(ii) Temperature
All information given are temperature
limits. The operation temperature
depends on the individual application.
(iii) Other important information
Cannon continuously endeavors to
improve their products. Therefore, Can-
non products may deviate from the
description, technical data and shape as
shown in this catalog and data sheets.
“Engineered for life” is a registered
trademark of ITT Industries, ©2005. All
other trademarks or registered trade-
marks are property of their respective
owners. All data subject to change with-
out notice.
Product Warranty
ITT Cannon, a Division of ITT Industries,
Inc. manufactures the highest quality
products available in the marketplace;
however these products are intended to
be used in accordance with the specifica-
tions in this publication. Any use or
application that deviates from the stated
operating specifications is not recom-
mended and may be unsafe. No informa-
tion and data contained in this publica-
tion shall be construed to create any lia-
bility on the part of Cannon. Any new
issue of this publication shall automati-
cally invalidate and supersede any and
all previous issues. A limited warranty
applies to Cannon products. Except for
obligations assumed by Cannon under
this warranty, Cannon shall not be liable
for any loss, damage, cost of repairs,
incidental or consequential damages of
any kind, whether or not based on
express or implied warranty, contract,
negligence or strict liability arising in
connection with the design, manufacture,
sale, use or repair of the products. Prod-
uct availability, prices and delivery dates
are exclusively subject to our respective
order confirmation form; the same
applies to orders based on development
samples delivered. This publication is
not to be construed as an offer. It is
intended merely as an invitation to make
an offer. By this publication, Cannon
does not assume responsibility or any
liability for any patent infringements or
other rights of third parties which may
result from its use. Reprinting this publi-
cation is generally permitted, indicating
the source. However, Cannon's prior con-
sent must be obtained in all cases.
Product Safety Information
67
www.ittcannon.com
www.ittcannon.com/fiberoptics
www.ittcannon.com/micro
D-Subminiature Connectors
Fiber Optic Connectors and Cable Assemblies
Rack and Panel Connectors
Microminiature Connectors
Circular/Filter/Hermetic Connectors
Initially pioneered by Cannon during the 1930s, Interconnect Solutions
is the world leader in rack and panel connectors, offering
unmatched
variety of shell configurations and insert
arrangements, materials,
plating, and contact options. Many of our standard and custom de-
signs meet the stringent requirements of ARINC 600, ARINC 404 (MIL-
C-81659), and MIL-DTL-83733 standards.
As a world leader in circular, filter, and hermetic connectors,
ITT can
leverage its design and manufacturing expertise to fit virtually any
application. Our expertise includes fast positive mating for a wide
range of military applications, as well as numerous sizes and
contact configurations for various harsh environments. ITT can
meet numerous specs, including NATO and MIL standards.
Cannon invented D-sub connectors in 1952. Our family
of D-Subs now includes combinations of signal, power and
RF, as
well as severe service sealed connectors. Cannon D-Subs are
available with an extensive line of backshells and accessories and
are one of the most economical shielded connector solutions
available. ITT D-Sub connectors are qualified to the MIL-DTL-
24308 specification.
Cannon fiber optic solutions provide an excellent
performance/cost value. Performance may be tailored to the
end system, with our use of superior materials and bonding
agents providing highly effective solutions. Our
wide variety of
products includes fiber optic hybrid contacts,
multi-channel, rack
and panel, and hi-rel assemblies, including MIL and ARINC
standard solutions.
Developed first by Cannon in the 1960’s, Interconnect Solutions
microminiature connectors offer high performance
and reliability
with exceptional versatility. Available in
rectangular, circular, and
strip configurations for countless applications, many of our con-
nectors meet or exceed
applicable requirements of the MIL-DTL-
83513 specification.
www.ittcannon.com/rackandpanel
RF Connectors
ITT Interconnect Solutions has been providing interconnect
products to the Microwave and RF industry since 1963 (formerly
The Sealectro Corporation). The RF 50 & 75 Ohm product lines
cover UHF band through Ku band requirements. These connectors
and cable assemblies are available with a thread type, snap type,
bayonet type or slide on coupling method. The frequencies range
from DC to 18+ GHz.
wwwJUUDBOOPODPN3'qXXX.ittcannon.com/RF75
www.ittcannon.com/cirDVMBSTqXXXJUUDBOOPODPNGJMUFSqXXX.ittcannon.com/hermetics
www.ittcannon.com/dsubs
© 2012 ITT Corporation ”Engineered for life” and “Cannon” are registered trademarks of
ITT Corporation. Specification and other data are based on information available at the time
of printing, and are subject to change without notice.
Global Design &
Manufacturing
Customer Support
North America Europe & Middle East Asia
MEXICO - Cannon, VEAM
Av. Libre Comercio s/n-
entre Calzada Industrial
Nuevo Nogales y Calzada del Raquet Club,
Parque Industrial Nuevo Nogales
phone: +52.631.3110050
fax: +52.631.3110060
USA - Cannon
666 East Dyer Road
Santa Ana, CA 92705
toll free: +1.800.854.3028
phone: +1.714.557.4700
fax: +1.714.628.2142
USA - BIW
500 Tesconi Circle
Santa Rosa, CA 95401
phone: +1.707.523.2300
fax: +1.707.523.3567
USA - VEAM
100 New Wood Road
Watertown, CT 06795
phone: +1.860.274.9681
fax: +1.860.274.4963
FRANCE - Cannon, VEAM
15, Boulevard Robert Thiboust
Serris, France 77700
phone: +33.1.60.04.93.93
fax: +33.1.60.04.93.90
GERMANY - Cannon, VEAM
ITT Cannon GmbH
Cannonstrasse 1
Weinstadt, 71384
phone: +49.7151.699.0
fax: +49.7151.699.217
ITALY - Cannon, VEAM
Corso Europa 41/43
Lainate (MI), Italy 20020
phone: +39.02938721
fax: +39.0293872300
LEBANON - BIW
P.O. Box 199
Jounieh
Lebanon
phone: +961.9.911.560
fax: +961.9.912.126
UK - Cannon, VEAM
Jays Close, Viables Estate
Basingstoke, RG22 4BA
phone: +44.1256.311200
fax: +44.1256.323356
CHINA - Cannon, VEAM
Tuopandun Industrial Area,
Jinda Cheng, Xiner Village, Shajing Town,
Baoan District, Shenzhen City,
Guangdong, China 518125
phone: +86.755.2726.7238
fax: +86.755.2726.7515
HONG KONG - Cannon, VEAM
Units 2405-6, 24/F, ING Tower
308 Des Voeux Road
Central
Hong Kong
phone: +852.2732.2720
fax: +852.2732.2919
INDIA - Cannon, VEAM
ITT Corporation India Pvt Ltd
Money Chamber, Unit No. 202
#6, KH Road, Bangalore
560027
phone: +91 80 41465632
fax: +91 80 41465631
JAPAN - Cannon, VEAM
11-3, 5 Chome, Hibarigaoka,
Zama-shi, Kanagawa, Japan 228-0003
phone: +81.462.57.2010
fax: +81.462.57.1680
SINGAPORE - Cannon, VEAM
10 Jalan Kilang #06-01
Singapore 159410
phone: +65.62763693 ext 232
fax: +65.62763685
ITT Interconnect Solutions
Cannon, VEAM, BIW
Visit our website at
www.ittcannon.com
