Power Switches Power Supply Snap-in Rocker Switches, JW Series Variation 1. Its construction is highly resistant to an in-rush current. It's secured with contact gap of 3mm compatible with Class 2 under European Standards. 2. It is mountable, compatible with A type in our JW Series (in chassis mounting dimensions). JWF21 Rating In-Rush Current Withstanding Voltage Electrical Life Circuit Operating Temperature Range 1 2 3 4 : 10A, 250V AC / 16A, 125V AC (JWF2131 only) : 100A (5msec max.) : AC 2000V (for one minute) : 10,000 cycles : DPST : -10C to +55C Safety Standard Approval No. UL JWF2110 SEMKO JWF2130 DEMKO JWF2140 VDE (Cat. No. JA47) TUV Size of Mounting Hole X 1.25~2.00 X Y 19.2 +0.1 0 12.9 +0.1 0 19.4 +0.1 0 12.9 +0.1 0 Refer to the following drawing for a mounting hole. Stamping direction 16 Without 1 4 2 5 3 6 Knob Color 0 Black 1 Orange 2 Beige 3 Gray Precautions on Use SEV Thickness of mounting board 0 Case Color 0 Black 1 Orange 2 Beige 3 Gray CSA JWF2120 : Lead Wiring : Faston : P. C. Board (Straight) : P. C. Board (Right-Angle) 0 : Compatible with overseas safety standards 1 : Not compatible with overseas safety standards Minimum Per-purchase Quantity : 900 units 0.75~1.25 F Hot Stamp Indication Specification 1. 2. 3. 4. 5. 6. - Hot Stamp Color 0 Without 1 Black 2 Red 3 White Switch operation side Y Rocker Switches Features F Type Pb Free 1. Setting the switching current to as low as 0.5A or less might result in an instable contact. If you apply the product in such usage, please make a separate inquiry with us. 2. The power switch is designed to have an alternating current rated. If you apply it with a direct current, please make a separate inquiry with us. 3. The rush performance (at an inrush current of 100A) has been evaluated under the RC load conditions subject to IEC65. The rush-resistant performance may vary with the conditions of a load, etc. It rest separately on an onequipment basis. Precaution when mounting a switch Switch design is on the basis of mounting on a SPCC (steel) panel. If use of soft materials such as plastic panels in place of standard SPCC panels is planned, decision should be made after verification of usability, particularly mounting strength for an extended period of time, under actual application conditions. Power Switches Rocker Switches, JW Series F Hot Stamp (DPST) Lead Wiring 15 10.3 14 22.7 5.3 2 21 Rocker Switches JWF2110- 0.8 9 12.5 3.2 10 19 JWF2120- F Hot Stamp (DPST) Faston Type 2 15 10.3 14 22.7 5.3 21 0.8 9 12.5 4.75 10 19 F (DPST) P. C. Board Type (Straight) Hot Stamp 15 10.3 14 22.7 5.3 21 2 JWF2130- 0.8 9 12.5 1.2 10 19 F (DPST) P. C. Board Type (Straight) Hot Stamp 15 10.3 2 5.3 JWF2131- 5 14 22.7 21 1.2 0.8 10 19 Hot Stamp 15 10.3 2 21 7 1.2 10 19 18.1 5.3 (DPST) P. C. Board Type (Right Angle) F 14 22.7 JWF2140- 9 12.5 3.5 9 12.5 17