EZ-LIGHTTM 2-Color Indicators for Use with Sensors Datasheet DC-operated LED indicators For the latest technical information about this product, including specifications, dimensions, and wiring, see www.bannerengineering.com. Models Inputs Models Inputs T8LGYX7PQP PNP K30LGYX7PQ PNP T8LGYX7NQP NPN K30LGYX7NQ NPN * * Polycarbonate/ABS alloy housing, thermoplastic diffuser IP67 M18GYX7PQ PNP M18GYX7NQ NPN * * Nickel-plated brass housing, thermoplastic diffuser Fully encapsulated IP67 PNP T18GYX7NQ NPN * Thermoplastic polyester housing, thermoplastic diffuser Fully encapsulated IP67 PNP T30GYX7NQ NPN * Thermoplastic polyester housing, thermoplastic diffuser Fully encapsulated IP67 22 mm threaded polycarbonate base, translucent polycarbonate dome Fully encapsulated IP67, IP69K K50LGYX7PQ PNP K50LGYX7NQ NPN * 30 mm threaded polycarbonate base, translucent polycarbonate dome Fully encapsulated IP67, IP69K K50FLGYX7PQ PNP K50FLGYX7NQ NPN * T30GYX7PQ * * * T18GYX7PQ * * * Polycarbonate base, translucent polycarbonate dome Fully encapsulated IP67, IP69K K80LGYX7PQ PNP K80LGYX7NQ NPN * * ABS and polycarbonate base, translucent polycarbonate dome Electronics fully encapsulated IP67 * A QD model requires a mating cable; see Cordsets on page 3. T8L Models: Standard pigtail QD models are listed. To order the integral 4-wire cable model, omit suffix QP (for example, T8LGYX7P). K80L Models: Standard 4-pin Euro integral QD connector models are listed. To order the terminal-wired model, omit suffix Q (for example, K80LGYX7P). Other Models: Standard 4-pin Euro integral QD connector models are listed. To order the 2 m (6.5 ft) integral 4-wire cable model, omit suffix Q (example, M18GYX7P). To order the 150 mm (5.9 in) PVC pigtail with 4-pin Euro connector, replace suffix Q with QP (for example, M18GYX7PQP). Contact the factory for other colors/color combinations, including: blue, white, and orange. WARNING: Not To Be Used for Personnel Protection Never use this device as a sensing device for personnel protection. Doing so could lead to serious injury or death. This device does not include the self-checking redundant circuitry necessary to allow its use in personnel safety applications. A sensor failure or malfunction can cause either an energized or de-energized sensor output condition. Original Document 121900 Rev. H 17 September 2014 121900 EZ-LIGHTTM 2-Color Indicators for Use with Sensors Specifications Supply Voltage and Current T8L models: 10 to 30 V dc at 20 mA max. T18, M18, and K30L models: 10 to 30 V dc at 25 mA max. per LED color T30 models: 10 to 30 V dc at 40 mA max. per LED color K50L, K50FL, and K80L models: 18 to 30 V dc at 40 mA max. per LED color Indicators Entire translucent diffuser or dome provides indication. Green and yellow, when connected to discrete output of 3-wire or 4-wire sensors. For other colors, contact factory for availability. Input Response Time Indicator ON/OFF: 1 ms max. Construction See Models lists Connections T8L models: 4-pin Euro-style 150 mm (5.9 in) pigtail QD (QP) or 4wire, 2 m (6.5 ft) integral cable, depending on model K80L models: 4-pin Euro-style integral QD (Q)standard; terminal-wired models available for use with bulk cable; compression fitting optional. Contact Factory for cable information. Other models: 4-pin Euro-style integral QD (Q), 5.9 in. pigtail QD (QP), or 4-wire, 2 m (6.5 ft) integral cable, depending on model Environmental Rating Rated IEC IP67. T8L not encapsulated; K80L has encapsulated electronics only; other models fully encapsulated. K30L, K50L, and K50FL QD models meet IP69K, per DIN 40050-9. Cabled models also meet IP69K if the cable and cable entrance are protected from high-pressure spray. Operating Conditions Temperature: -40 C to +50 C (-40 F to +122 F) Certifications K30L and K50L models: Other models: Dimensions T8L Models T18 Models M18 Models 15. 8 mm (0.62") 8.8 mm (0.35") 19.1 mm (0.75") M8 X 1 O16.5 mm (0.65") 53.6 mm (2.11") M18 x 1 Thread 61 mm (2.4") 30 mm (1.2") 33.0 mm (1.3") o16.3 mm (0.64") O 15 mm (0.59") M12 X 1 150 mm (6") Euro-style PVC Pigtail K30L Models O 40.0 mm (1.57") K50L Models 50.0 mm (1.97") 30.0 mm (1.18") 63.7 mm (2.51") M30 x 1.5 Thread 58.0 mm (2.28") M12 X 1 O 15 mm (0.59") 45.0 mm (1.77") 23 mm (0.9") M12 X 1 T30 Models 2 M18 X 1 M30 x 1.5 (mounting nut 120037 included) Max. Torque 4.5 Nm (40 in-lbf) 31.0 mm (1.22") 16.0 mm (0.63") M22 X 1.5 Max. Torque 2.25 Nm (20 in-lbf) M12 X 1 www.bannerengineering.com - Tel: +1-763-544-3164 Internal Threads 1/2 - 14 NPSM Max. Torque 2.25 Nm (20 in-lbf) 38 mm (1.50")* 20 mm (0.79") 11 mm (0.43") P/N 121900 Rev. H EZ-LIGHTTM 2-Color Indicators for Use with Sensors K50FL Models K80L Models 44.6 [1.76"] 80.8 mm (3.18") O50 [1.97"] 65.0 mm (2.56") 109.5 mm (4.31") 66.3 mm (2.61") 60.0 [2.36"] 35.0 [1.38"] 65.0 mm (2.56") 2x 5.0 [0.20"] 16.0 [0.63"] 2x 5.5 [0.21"] 2x 5.0 [0.20"] 17.0 [0.67"] 4X O 5.5 mm (O 0.22") Max. Torque 1.12 Nm (10 in-lbf) with supplied screws 40.0 [1.58"] 4X 8-32 UNC Max. Torque 1.12 Nm (10 in-lbf) Internal Threads 1/2 - 14 NPSM Max. Torque 2.25 Nm (20 in-lbf) 26.0 mm (1.02") M12 X 1 Wiring PNP Models NPN Models Wiring Key and Legend 1. 2. 3. 4. Brown White Blue Black Legend T.C. = To Controller Y = Yellow G = Green X = Not Used *Yellow ON = Green OFF ** This object represents the sensor Cordsets 4-Pin Threaded M12/Euro-Style Cordsets Model Length MQDC-406 1.83 m (6 ft) MQDC-415 4.57 m (15 ft) MQDC-430 9.14 m (30 ft) MQDC-450 15.2 m (50 ft) Style Dimensions Pinout 44 Typ. Straight www.bannerengineering.com - Tel: +1-763-544-3164 3 4 M12 x 1 o 14.5 1 2 3 4 P/N 121900 Rev. H 2 1 = = = = Brown White Blue Black 3 EZ-LIGHTTM 2-Color Indicators for Use with Sensors 4-Pin Threaded M12/Euro-Style Cordsets Model Length MQDC-406RA 1.83 m (6 ft) MQDC-415RA 4.57 m (15 ft) MQDC-430RA 9.14 m (30 ft) MQDC-450RA 15.2 m (50 ft) Style Dimensions Pinout 32 Typ. [1.26"] 30 Typ. [1.18"] Right-Angle M12 x 1 o 14.5 [0.57"] 4-Pin Threaded M12/Euro-Style CordsetsDouble Ended Model Length MQDEC-401SS 0.31 m (1 ft) MQDEC-403SS 0.91 m (3 ft) MQDEC-406SS 1.83 m (6 ft) MQDEC-412SS 3.66 m (12 ft) MQDEC-420SS 6.10 m (20 ft) MQDEC-430SS 9.14 m (30 ft) MQDEC-450SS 15.2 m (50 ft) Style Dimensions Pinout 40 Typ. [1.58"] M12 x 1 o 14.5 [0.57"] Male Straight/ Female Straight 44 Typ. [1.73"] 2 1 3 4 M12 x 1 o 14.5 [0.57"] MQDEC-403RS 0.91 m (1 ft) MQDEC-406RS 1.83 m (3 ft) MQDEC-412RS 3.66 m (12 ft) MQDEC-420RS 6.10 m (20 ft) MQDEC-430RS 9.14 m (30 ft) MQDEC-450RS 15.2 m (50 ft) 1 2 32 Typ. [1.26"] 4 3 30 Typ. [1.18"] Male Right-Angle/ Female Straight 1 2 3 4 M12 x 1 o 14.5 [0.57"] = = = = Brown White Blue Black o 14.5 [0.57"] 44 Typ. [1.73"] 4 www.bannerengineering.com - Tel: +1-763-544-3164 M12 x 1 P/N 121900 Rev. H EZ-LIGHTTM 2-Color Indicators for Use with Sensors 4-Pin Threaded M12/Euro-Style Splitter Cordsets Flat Junction Model Branches (Female) Trunk (Male) CSB-M1240M1240 No branch No trunk CSB-M1240M1241 No trunk CSB-M1241M1241 0.30 m (1 ft) CSB-M1248M1241 2.50 m (8 ft) CSB-M12415M1241 4.57 m (15 ft) CSB-M12425M1241 CSB-UNT425M1241 2 x 0.30 m (1 ft) 7.60 m (25 ft) Dimensions Pinout O4.5 [0.18"] 40 Typ. [1.58"] 18.0 [0.71"] 3 4 44 Typ. [1.73"] O14.5 [0.57"] O14.5 [0.57"] M12 x 1 M12 x 1 7.60 m (25 ft) Unterminated 2 1 35 [1.38"] 43.0 [1.69"] 1 2 4 3 1 2 3 4 = = = = Brown White Blue Black Banner Engineering Corp Limited Warranty Banner Engineering Corp. warrants its products to be free from defects in material and workmanship for one year following the date of shipment. Banner Engineering Corp. will repair or replace, free of charge, any product of its manufacture which, at the time it is returned to the factory, is found to have been defective during the warranty period. This warranty does not cover damage or liability for misuse, abuse, or the improper application or installation of the Banner product. THIS LIMITED WARRANTY IS EXCLUSIVE AND IN LIEU OF ALL OTHER WARRANTIES WHETHER EXPRESS OR IMPLIED (INCLUDING, WITHOUT LIMITATION, ANY WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE), AND WHETHER ARISING UNDER COURSE OF PERFORMANCE, COURSE OF DEALING OR TRADE USAGE. This Warranty is exclusive and limited to repair or, at the discretion of Banner Engineering Corp., replacement. IN NO EVENT SHALL BANNER ENGINEERING CORP. BE LIABLE TO BUYER OR ANY OTHER PERSON OR ENTITY FOR ANY EXTRA COSTS, EXPENSES, LOSSES, LOSS OF PROFITS, OR ANY INCIDENTAL, CONSEQUENTIAL OR SPECIAL DAMAGES RESULTING FROM ANY PRODUCT DEFECT OR FROM THE USE OR INABILITY TO USE THE PRODUCT, WHETHER ARISING IN CONTRACT OR WARRANTY, STATUTE, TORT, STRICT LIABILITY, NEGLIGENCE, OR OTHERWISE. Banner Engineering Corp. reserves the right to change, modify or improve the design of the product without assuming any obligations or liabilities relating to any product previously manufactured by Banner Engineering Corp. www.bannerengineering.com - Tel: +1-763-544-3164