Datasheet
DC-operated LED indicators
For the latest technical information about this product, including specifications, dimensions, and wiring, see
www.bannerengineering.com.
Models Inputs
T8LGYX7PQP PNP
T8LGYX7NQP NPN
• Polycarbonate/ABS alloy housing,
thermoplastic diffuser
• IP67
M18GYX7PQ PNP
M18GYX7NQ NPN
• Nickel-plated brass housing,
thermoplastic diffuser
• Fully encapsulated IP67
T18GYX7PQ PNP
T18GYX7NQ NPN
• Thermoplastic polyester housing,
thermoplastic diffuser
• Fully encapsulated IP67
T30GYX7PQ PNP
T30GYX7NQ NPN
• Thermoplastic polyester housing,
thermoplastic diffuser
• Fully encapsulated IP67
Models Inputs
K30LGYX7PQ PNP
K30LGYX7NQ NPN
• 22 mm threaded polycarbonate
base, translucent polycarbonate
dome
• Fully encapsulated IP67, IP69K
K50LGYX7PQ PNP
K50LGYX7NQ NPN
• 30 mm threaded polycarbonate
base, translucent polycarbonate
dome
• Fully encapsulated IP67, IP69K
K50FLGYX7PQ PNP
K50FLGYX7NQ NPN
• Polycarbonate base, translucent
polycarbonate dome
• Fully encapsulated IP67, IP69K
K80LGYX7PQ PNP
K80LGYX7NQ NPN
• ABS and polycarbonate base,
translucent polycarbonate dome
• Electronics fully encapsulated IP67
* A QD model requires a mating cable; see Cordsets on page 3.
T8L Models: Standard pigtail QD models are listed. To order the integral 4-wire cable model, omit suffix QP (for example,
T8LGYX7P).
K80L Models: Standard 4-pin Euro integral QD connector models are listed. To order the terminal-wired model, omit
suffix Q (for example, K80LGYX7P).
Other Models: Standard 4-pin Euro integral QD connector models are listed. To order the 2 m (6.5 ft) integral 4-wire
cable model, omit suffix Q (example, M18GYX7P). To order the 150 mm (5.9 in) PVC pigtail with 4-pin Euro connector,
replace suffix Q with QP (for example, M18GYX7PQP).
Contact the factory for other colors/color combinations, including: blue, white, and orange.
WARNING: Not To Be Used for Personnel Protection
Never use this device as a sensing device for personnel protection. Doing so could lead to
serious injury or death. This device does not include the self-checking redundant circuitry necessary
to allow its use in personnel safety applications. A sensor failure or malfunction can cause either an
energized or de-energized sensor output condition.
EZ-LIGHT™ 2-Color Indicators for Use with
Sensors
Original Document
121900 Rev. H 17 September 2014
121900
Specifications
Supply Voltage and Current
T8L models: 10 to 30 V dc at 20 mA max.
T18, M18, and K30L models: 10 to 30 V dc at 25 mA max. per LED
color
T30 models: 10 to 30 V dc at 40 mA max. per LED color
K50L, K50FL, and K80L models: 18 to 30 V dc at 40 mA max. per LED
color
Indicators
Entire translucent diffuser or dome provides indication. Green and
yellow, when connected to discrete output of 3-wire or 4-wire sensors.
For other colors, contact factory for availability.
Input Response Time
Indicator ON/OFF: 1 ms max.
Construction
See Models lists
Connections
T8L models: 4-pin Euro-style 150 mm (5.9 in) pigtail QD (QP) or 4-
wire, 2 m (6.5 ft) integral cable, depending on model
K80L models: 4-pin Euro-style integral QD (Q)standard; terminal-wired
models available for use with bulk cable; compression fitting optional.
Contact Factory for cable information.
Other models: 4-pin Euro-style integral QD (Q), 5.9 in. pigtail QD (QP),
or 4-wire, 2 m (6.5 ft) integral cable, depending on model
Environmental Rating
Rated IEC IP67. T8L not encapsulated; K80L has encapsulated
electronics only; other models fully encapsulated.
K30L, K50L, and K50FL QD models meet IP69K, per DIN 40050-9.
Cabled models also meet IP69K if the cable and cable entrance are
protected from high-pressure spray.
Operating Conditions
Temperature: −40 °C to +50 °C (−40 °F to +122 °F)
Certifications
K30L and K50L models:
Other models:
Dimensions
T8L Models T18 Models M18 Models
ø16.3 mm
(0.64")
8.8 mm (0.35")
150 mm (6")
Euro-style PVC Pigtail
19.1 mm (0.75")
15. 8 mm (0.62")
M8 X 1
120037
Ø 15 mm
(0.59")
M18 x 1
Thread
33.0 mm
(1.3")
53.6 mm
(2.11")
M12 X 1
30 mm
(1.2")
23 mm
(0.9")
Ø16.5 mm
(0.65")
61 mm
(2.4")
M12 X 1
M18 X 1
T30 Models K30L Models K50L Models
M30 x 1.5
Thread
Ø 40.0 mm
(1.57")
45.0 mm
(1.77")
63.7 mm
(2.51")
Ø 15 mm
(0.59")
M12 X 1
31.0 mm
(1.22")
58.0 mm
(2.28")
30.0 mm (1.18")
16.0 mm (0.63")
M12 X 1
Max. Torque
2.25 Nm (20 in-lbf)
M22 X 1.5
50.0 mm
(1.97")
38 mm (1.50")*
20 mm (0.79")
11 mm (0.43")
M30 x 1.5
(mounting nut
included)
Internal Threads
½ - 14 NPSM
Max. Torque 4.5 Nm
(40 in-lbf)
Max. Torque 2.25 Nm
(20 in-lbf)
EZ-LIGHT™ 2-Color Indicators for Use with Sensors
2 www.bannerengineering.com - Tel: +1-763-544-3164 P/N 121900 Rev. H
K50FL Models K80L Models
60.0
[2.36"]
35.0
[1.38"]
16.0 [0.63"]
40.0 [1.58"]
2x 5.0 [0.20"]
2x 5.0 [0.20"]
2x 5.5 [0.21"]
Ø50 [1.97"]
17.0 [0.67"]
44.6 [1.76"]
Wiring
NPN Models PNP Models Wiring Key and Legend
*Yellow ON = Green OFF
** This object represents the sensor
1. Brown
2. White
3. Blue
4. Black
Legend
T.C. = To Controller
Y = Yellow
G = Green
X = Not Used
Cordsets
4-Pin Threaded M12/Euro-Style Cordsets
Model Length Style Dimensions Pinout
MQDC-406 1.83 m (6 ft)
Straight
44 Typ.
ø 14.5
M12 x 1
2
3
4
1
1 = Brown
2 = White
3 = Blue
4 = Black
MQDC-415 4.57 m (15 ft)
MQDC-430 9.14 m (30 ft)
MQDC-450 15.2 m (50 ft)
EZ-LIGHT™ 2-Color Indicators for Use with Sensors
P/N 121900 Rev. H www.bannerengineering.com - Tel: +1-763-544-3164 3
4-Pin Threaded M12/Euro-Style Cordsets
Model Length Style Dimensions Pinout
MQDC-406RA 1.83 m (6 ft)
Right-Angle
32 Typ.
[1.26"]
30 Typ.
[1.18"]
ø 14.5 [0.57"]
M12 x 1
MQDC-415RA 4.57 m (15 ft)
MQDC-430RA 9.14 m (30 ft)
MQDC-450RA 15.2 m (50 ft)
4-Pin Threaded M12/Euro-Style Cordsets―Double Ended
Model Length Style Dimensions Pinout
MQDEC-401SS 0.31 m (1 ft)
Male Straight/
Female Straight
40 Typ.
[1.58"]
ø 14.5 [0.57"]
M12 x 1
44 Typ.
[1.73"]
ø 14.5 [0.57"]
M12 x 1
2
3
4
1
1
4
3
2
1 = Brown
2 = White
3 = Blue
4 = Black
MQDEC-403SS 0.91 m (3 ft)
MQDEC-406SS 1.83 m (6 ft)
MQDEC-412SS 3.66 m (12 ft)
MQDEC-420SS 6.10 m (20 ft)
MQDEC-430SS 9.14 m (30 ft)
MQDEC-450SS 15.2 m (50 ft)
MQDEC-403RS 0.91 m (1 ft)
Male Right-Angle/
Female Straight
44 Typ.
[1.73"]
ø 14.5 [0.57"]
M12 x 1
32 Typ.
[1.26"]
30 Typ.
[1.18"]
ø 14.5 [0.57"]
M12 x 1
MQDEC-406RS 1.83 m (3 ft)
MQDEC-412RS 3.66 m (12 ft)
MQDEC-420RS 6.10 m (20 ft)
MQDEC-430RS 9.14 m (30 ft)
MQDEC-450RS 15.2 m (50 ft)
EZ-LIGHT™ 2-Color Indicators for Use with Sensors
4 www.bannerengineering.com - Tel: +1-763-544-3164 P/N 121900 Rev. H
4-Pin Threaded M12/Euro-Style Splitter Cordsets ― Flat Junction
Model Branches
(Female) Trunk (Male) Dimensions Pinout
CSB-M1240M1240 No branch No trunk
44 Typ.
[1.73"]
43.0
[1.69"]
Ø14.5 [0.57"]
M12 x 1
Ø14.5 [0.57"]
40 Typ.
[1.58"]
18.0
[0.71"]
Ø4.5
[0.18"]
35 [1.38"]
M12 x 1
2
3
4
1
1
4
3
2
1 = Brown
2 = White
3 = Blue
4 = Black
CSB-M1240M1241
2 x 0.30 m
(1 ft)
No trunk
CSB-M1241M1241 0.30 m (1 ft)
CSB-M1248M1241 2.50 m (8 ft)
CSB-M12415M1241 4.57 m (15 ft)
CSB-M12425M1241 7.60 m (25 ft)
CSB-UNT425M1241 7.60 m (25 ft)
Unterminated
Banner Engineering Corp Limited Warranty
Banner Engineering Corp. warrants its products to be free from defects in material and workmanship for one year following
the date of shipment. Banner Engineering Corp. will repair or replace, free of charge, any product of its manufacture
which, at the time it is returned to the factory, is found to have been defective during the warranty period. This warranty
does not cover damage or liability for misuse, abuse, or the improper application or installation of the Banner product.
THIS LIMITED WARRANTY IS EXCLUSIVE AND IN LIEU OF ALL OTHER WARRANTIES WHETHER EXPRESS OR
IMPLIED (INCLUDING, WITHOUT LIMITATION, ANY WARRANTY OF MERCHANTABILITY OR FITNESS FOR A
PARTICULAR PURPOSE), AND WHETHER ARISING UNDER COURSE OF PERFORMANCE, COURSE OF DEALING OR
TRADE USAGE.
This Warranty is exclusive and limited to repair or, at the discretion of Banner Engineering Corp., replacement. IN NO
EVENT SHALL BANNER ENGINEERING CORP. BE LIABLE TO BUYER OR ANY OTHER PERSON OR ENTITY FOR
ANY EXTRA COSTS, EXPENSES, LOSSES, LOSS OF PROFITS, OR ANY INCIDENTAL, CONSEQUENTIAL OR
SPECIAL DAMAGES RESULTING FROM ANY PRODUCT DEFECT OR FROM THE USE OR INABILITY TO USE THE
PRODUCT, WHETHER ARISING IN CONTRACT OR WARRANTY, STATUTE, TORT, STRICT LIABILITY,
NEGLIGENCE, OR OTHERWISE.
Banner Engineering Corp. reserves the right to change, modify or improve the design of the product without assuming any
obligations or liabilities relating to any product previously manufactured by Banner Engineering Corp.
EZ-LIGHT™ 2-Color Indicators for Use with Sensors
www.bannerengineering.com - Tel: +1-763-544-3164