TLV2620, TLV2621, TLV2622, TLV2623, TLV2624, TLV2625, TLV262xA FAMILY OF LOW-POWER WIDE BANDWIDTH SINGLE SUPPLY OPERATIONAL AMPLIFIERS WITH SHUTDOWN SLOS251B - DECEMBER 2000 - REVISED APRIL 2001 D D + - DIFFERENTIAL VOLTAGE AMPLIFICATION AND PHASE vs FREQUENCY description 120 VDD = 2.7 V and 5 V RL= 2 k CL = 10 pF TA = 25 C 110 100 90 80 180 70 60 150 Phase 120 50 40 90 60 30 30 20 0 -30 Gain 10 0 -10 10 Phase Margin - D D Operational Amplifier CMOS Rail-To-Rail Output VICR Includes Positive Rail Wide Bandwidth . . . 11 MHz Slew Rate . . . 10 V/s Supply Current . . . 800 A/Channel Input Noise Voltage . . . 27 nV/Hz Ultralow Power Down Mode - IDD(SHDN) = 4 A/Channel Supply Voltage Range . . . 2.7 V to 5.5 V Specified Temperature Range - -40 C to 125 C . . . Industrial Grade Ultrasmall Packaging - 5 or 6 Pin SOT-23 (TLV2620/1) - 8 or 10 Pin MSOP (TLV2622/3) Universal Opamp EVM (See SLOU060 for More Information) A VD - Differential Voltage Amplification - dB D D D D D D D -60 -90 100 1k 10k 100k 1M f - Frequency - Hz 10M The TLV262x single supply operational amplifiers provide rail-to-rail output with an input range that includes the positive rail. The TLV262x takes the minimum operating supply voltage down to 2.7 V over the extended industrial temperature range (-40C to 125C) while adding the rail-to-rail output swing feature. The TLV262x also provides 11-MHz bandwidth from only 800 A of supply current. The maximum recommended supply voltage is 5.5 V, which, when coupled with a 2.7-V minimum, allows the devices to be operated from lithium ion cells. The combination of wide bandwidth, low noise, and low distortion makes it ideal for high speed and high resolution data converter applications. The positive input range allows it to directly interface to positive rail referred systems. All members are available in PDIP and SOIC with the singles in the small SOT-23 package, duals in the MSOP, and quads in the TSSOP package. The 2.7-V operation makes it compatible with Li-Ion powered systems and the operating supply voltage range of many micro-power micro-controllers available today including TI's MSP430. AMPLIFIER SELECTION TABLE DEVICE TLV262x TLV263x VDD [V] IDD/ch [A] VIO [V] IIB [pA] 2.7-5.5 750 250 1 2.7-5.5 750 250 1 VICR [V] GBW [MHz] SLEW RATE [V/s] Vn, 1 kHz [nV/Hz] IO [mA] SHUTDOWN 1 V to VDD + 0.2 11 10 27 28 Y GND to VDD - 0.8 10 9 27 28 Y TLV278x 1.8-3.6 650 250 2.5 -0.2 to VDD + 0.2 8 5 9 10 Y TLC07x 4.5 - 16 1900 60 1.5 0.5 to VDD - 0.8 10 19 7 55 Y 8.5 55 Y TLC08x 4.5 - 16 1900 60 3 GND to VDD - 1 10 19 This device is in the Product Preview stage of development. Contact your local TI sales office for availability. Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of Texas Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet. Copyright 2001, Texas Instruments Incorporated PRODUCTION DATA information is current as of publication date. Products conform to specifications per the terms of Texas Instruments standard warranty. Production processing does not necessarily include testing of all parameters. POST OFFICE BOX 655303 * DALLAS, TEXAS 75265 1 TLV2620, TLV2621, TLV2622, TLV2623, TLV2624, TLV2625, TLV262xA FAMILY OF LOW-POWER WIDE BANDWIDTH SINGLE SUPPLY OPERATIONAL AMPLIFIERS WITH SHUTDOWN SLOS251B - DECEMBER 2000 - REVISED APRIL 2001 TLV2620 and TLV2621 AVAILABLE OPTIONS PACKAGED DEVICES VIOmax AT 25 C 25C TA 3500 V - 40C to 125C SOT-23 SMALL OUTLINE (D) TLV2620ID TLV2621ID (DBV) SYMBOL PLASTIC DIP (P) TLV2620IDBV TLV2621IDBV VBAI VBBI TLV2620IP TLV2621IP This package is available taped and reeled. To order this packaging option, add an R suffix to the part number (e.g., TLV2620IDR). The SOT23 package devices are only available taped and reeled. The R Suffix denotes quantities (3,000 pieces per reel). For smaller quantities (250 pieces per mini-reel), add a T suffix to the part number (e.g. TLV2620IDBVT). TLV2622 and TLV2623 AVAILABLE OPTIONS PACKAGED DEVICES VIOmax AT 25 25C C TA - 40C to 125C SMALL OUTLINE (D) TLV2622ID TLV2623ID 3500 V (DGK) SYMBOL (DGS) SYMBOL PLASTIC DIP (N) TLV2622IDGK -- xxTIAKM -- -- TLV2623IDGS -- xxTIALC -- TLV2623IN MSOP PLASTIC DIP (P) TLV2622IP -- This package is available taped and reeled. To order this packaging option, add an R suffix to the part number (e.g., TLV2622IDR). TLV2624 and TLV2625 AVAILABLE OPTIONS PACKAGED DEVICES TA VIOma max AT 25C - 40C to 125C 3500 V SMALL OUTLINE (D) TLV2624ID TLV2625ID PLASTIC DIP (N) TSSOP (PW) TLV2624IN TLV2625IN TLV2624IPW TLV2625IPW This package is available taped and reeled. To order this packaging option, add an R suffix to the part number (e.g., TLV2624IDR). 2 POST OFFICE BOX 655303 * DALLAS, TEXAS 75265 TLV2620, TLV2621, TLV2622, TLV2623, TLV2624, TLV2625, TLV262xA FAMILY OF LOW-POWER WIDE BANDWIDTH SINGLE SUPPLY OPERATIONAL AMPLIFIERS WITH SHUTDOWN SLOS251B - DECEMBER 2000 - REVISED APRIL 2001 TLV262x PACKAGE PINOUTS TLV2620 D OR P PACKAGE (TOP VIEW) TLV2620 DBV PACKAGE (TOP VIEW) OUT 1 6 VDD GND 2 5 SHDN IN+ 3 4 IN - TLV2621 D OR P PACKAGE (TOP VIEW) NC IN - IN + GND 1OUT 1IN - 1IN+ GND NC 1SHDN NC 1 8 2 7 3 6 4 5 NC IN - IN + GND 1 8 2 7 3 6 4 5 TLV2621 DBV PACKAGE (TOP VIEW) SHDN VDD OUT NC OUT 1 GND 2 IN+ 3 1OUT 1IN - 1IN + GND 1 8 2 7 3 6 4 5 VDD 2OUT 2IN - 2IN+ VDD 4 IN - TLV2623 DGS PACKAGE (TOP VIEW) TLV2622 D, DGK, OR P PACKAGE (TOP VIEW) NC VDD OUT NC 5 1OUT 1IN - 1IN+ GND 1SHDN 1 2 3 4 5 10 9 8 7 6 VDD 2OUT 2IN - 2IN+ 2SHDN TLV2623 D OR N PACKAGE TLV2624 D, N, OR PW PACKAGE TLV2625 D, N, OR PW PACKAGE (TOP VIEW) (TOP VIEW) (TOP VIEW) 1 14 2 13 3 12 4 11 5 10 6 9 7 8 VDD 2OUT 2IN - 2IN+ NC 2SHDN NC 1OUT 1IN - 1IN+ VDD 2IN+ 2IN - 2OUT 1 14 2 13 3 12 4 11 5 10 6 9 7 8 4OUT 4IN - 4IN+ GND 3IN+ 3IN - 3OUT 1OUT 1IN - 1IN+ VDD 2IN+ 2IN - 2OUT 1SHDN 1 16 2 15 3 14 4 13 5 12 6 11 7 10 8 9 4OUT 4IN - 4IN+ GND 3IN + 3IN- 3OUT 2SHDN NC - No internal connection POST OFFICE BOX 655303 * DALLAS, TEXAS 75265 3 TLV2620, TLV2621, TLV2622, TLV2623, TLV2624, TLV2625, TLV262xA FAMILY OF LOW-POWER WIDE BANDWIDTH SINGLE SUPPLY OPERATIONAL AMPLIFIERS WITH SHUTDOWN SLOS251B - DECEMBER 2000 - REVISED APRIL 2001 absolute maximum ratings over operating free-air temperature range (unless otherwise noted) Supply voltage, VDD (see Note 1) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 V Differential input voltage, VID . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . VDD Input voltage range, VI (see Note 1) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 to VDD +0.2 V Input current, II (any input) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 mA Output current, IO . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40 mA Continuous total power dissipation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . See Dissipation Rating Table Operating free-air temperature range, TA: I suffix . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . -40C to 125C Maximum junction temperature, TJ . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 150C Storage temperature range, Tstg . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . - 65C to 150C Lead temperature 1,6 mm (1/16 inch) from case for 10 seconds . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 260C Stresses beyond those listed under "absolute maximum ratings" may cause permanent damage to the device. These are stress ratings only, and functional operation of the device at these or any other conditions beyond those indicated under "recommended operating conditions" is not implied. Exposure to absolute-maximum-rated conditions for extended periods may affect device reliability. NOTE 1: All voltage values, except differential voltages, are with respect to GND. DISSIPATION RATING TABLE PACKAGE JC (C/W) JA (C/W) TA 25C POWER RATING TA = 125C POWER RATING D (8) 38.3 176 710 mW 142 mW D (14) 26.9 122.3 1022 mW 204.4 mW D (16) 25.7 114.7 1090 mW 218 mW DBV (5) 55 324.1 385 mW 77.1 mW DBV (6) 55 294.3 425 mW 85 mW DGK (8) 54.2 259.9 481 mW 96.1 mW DGS (10) 54.1 259.7 485 mW 97 mW N (14, 16) 32 78 1600 mW 320.5 mW P (8) 41 104 1200 mW 240.4 mW PW (14) 29.3 173.6 720 mW 144 mW PW (16) 28.7 161.4 774 mW 154.9 mW recommended operating conditions Supply voltage voltage, VDD Single supply Split supply Common-mode input voltage range, VICR Operating free-air temperature, TA I-suffix Shutdown on/off voltage level VIL VIH POST OFFICE BOX 655303 MAX 2.7 5.5 1.35 2.75 1 VDD+0.2 125 - 40 0.4 2 Relative to GND. 4 MIN * DALLAS, TEXAS 75265 UNIT V V C V TLV2620, TLV2621, TLV2622, TLV2623, TLV2624, TLV2625, TLV262xA FAMILY OF LOW-POWER WIDE BANDWIDTH SINGLE SUPPLY OPERATIONAL AMPLIFIERS WITH SHUTDOWN SLOS251B - DECEMBER 2000 - REVISED APRIL 2001 electrical characteristics at specified free-air temperature, VDD = 2.7 V, 5 V (unless otherwise noted) dc performance PARAMETER VIO Input offset voltage VIO Temperature coefficient of input offset voltage CMRR Common-mode rejection ratio AVD Large-signal g g differential voltage g amplification TEST CONDITIONS VIC = VDD/2, /2 VO = VDD/2 /2, RS = 50 VIC = 1 to VDD, RS = 50 TA 25C MIN TYP MAX 250 3500 Full range 4500 25C VDD = 2 2.7 7V VDD = 5 V VDD = 2 2.7 7V V, RL = 2 k k, VO(PP) = 1 1.7 7V VDD = 5 V V, RL = 2 k k, VO(PP) = 4 V 25C 77 73 25C 78 Full range 75 25C 90 Full range 82 25C 95 Full range 90 V V/C 3 Full range UNIT 98 dB 99 100 dB 100 input characteristics PARAMETER IIO Input offset current IIB Input bias current ri(d) Differential input resistance Ci(c) Common-mode input capacitance Full range is -40C to 125C for the I suffix. TEST CONDITIONS VIC = VDD/2, VO = VDD/2 /2, RS = 50 MIN TYP MAX 1 50 Full range 25C 100 1 Full range f = 1 kHz POST OFFICE BOX 655303 TA 25C * DALLAS, TEXAS 75265 50 UNIT pA 200 25C 100 G 25C 8 pF 5 TLV2620, TLV2621, TLV2622, TLV2623, TLV2624, TLV2625, TLV262xA FAMILY OF LOW-POWER WIDE BANDWIDTH SINGLE SUPPLY OPERATIONAL AMPLIFIERS WITH SHUTDOWN SLOS251B - DECEMBER 2000 - REVISED APRIL 2001 electrical characteristics at specified free-air temperature, VDD = 2.7 V, 5 V (unless otherwise noted) (continued) output characteristics PARAMETER TEST CONDITIONS VDD = 2 2.7 7V VIC = VDD/2,, IOH = - 1 mA VOH VDD = 5 V High level output voltage High-level 7V VDD = 2 2.7 VIC = VDD/2,, IOH = - 10 mA VDD = 5 V VDD = 2 2.7 7V VIC = VDD/2,, IOL = 1 mA VOL VDD = 5 V Low level output voltage Low-level VDD = 2 2.7 7V VIC = VDD/2,, IOL = 10 mA IO IOS Output current VDD = 5 V VDD = 2.7 V,, VO = 0.5 V from rail Sourcing VDD = 5 V,, VO = 0.5 V from rail Sourcing Sinking TA MIN TYP 2.67 25C 2.6 Full range 2.55 25C 4.95 Full range 4.9 25C 2.3 Full range 2.25 25C 4.7 Full range 4.6 25C UNIT 4.98 V 2.43 4.8 0.03 Full range 0.1 0.15 25C 0.025 Full range 0.05 0.1 25C 0.26 Full range 0.4 mV 0.45 25C 0.2 Full range 0.25 0.35 14 19 25C mA 28 Sinking 28 Sourcing VDD = 2.7 V VDD = 5 V 50 Sinking VDD = 2.7 V VDD = 5 V Short circuit output current Short-circuit MAX 95 25C mA 50 95 Full range is -40C to 125C for the I suffix. power supply PARAMETER IDD Supply current (per channel) PSRR Supplyy voltage g rejection j ratio (VDD /VIO) TEST CONDITIONS VO = VDD/2 /2, SHDN = VDD VDD = 2.7 V to 3.3 V,, VIC = VDD /2 No load VDD = 2.7 V to 5 V,, VIC = VDD /2 Full range is -40C to 125C for the I suffix. 6 POST OFFICE BOX 655303 * DALLAS, TEXAS 75265 TA 25C MIN TYP MAX 800 1000 Full range 1300 25C 80 Full range 75 25C 75 Full range 70 UNIT A 98 90 dB TLV2620, TLV2621, TLV2622, TLV2623, TLV2624, TLV2625, TLV262xA FAMILY OF LOW-POWER WIDE BANDWIDTH SINGLE SUPPLY OPERATIONAL AMPLIFIERS WITH SHUTDOWN SLOS251B - DECEMBER 2000 - REVISED APRIL 2001 electrical characteristics at specified free-air temperature, VDD = 2.7 V, 5 V (unless otherwise noted) (continued) dynamic performance PARAMETER UGBW Unity gain bandwidth TA TEST CONDITIONS RL = 2 k, VDD = 2.7 2 7 V, V VO(PP) = 1 1.7 7V SR+ Positive slew rate at unity gain Negative g slew rate at unityy gain Phase margin Gain margin 5.4 5.1 Full range 2.7 6 0C to 125C 5.3 Full range 3.4 25C 5.4 0C to 125C 5.1 Full range 2.7 RL = 2 k k, CL = 50 pF 25C V VDD = 5 V, VO(PP) = 3 3.5 5V m 25C 25C VDD = 2.7 2 7 V, V VO(PP) = 1 1.7 7V RL = 2 k k, 6 0C to 125C 5.3 Full range 3.4 CL = 10 pF 25C TEST CONDITIONS TA TYP MAX 11 0C to 125C RL = 2 k k, CL = 50 pF VDD = 5 V, V VO(PP) = 3 3.5 5V SR SR- MIN 25C CL = 10 pF UNIT MHz 9.5 V/s 10 8 V/s 8 63 8 dB Full range is -40C to 125C for the I suffix. noise/distortion performance PARAMETER THD + N Total harmonic distortion plus noise Vn Equivalent input noise voltage In Equivalent input noise current VO(PP) = VDD/2, /2 RL = 2 k k, f = 10 kHz MIN AV = 1 AV = 10 AV = 100 f = 1 kHz TYP MAX UNIT 0.002% 0.019% 0.095% 25C 53 f = 10 kHz 27 f = 1 kHz 0.9 nV/Hz fA /Hz shutdown characteristics PARAMETER TEST CONDITIONS IDD(SHDN) Supply current, per channel in shutdown mode (TLV2620, (TLV2620 TLV2623, TLV2623 TLV2625) t(on) ( ) Amplifier turnon time TA 25C MIN TYP MAX 4 11 SHDN = 0.4 04V Full range RL = 2 k VDD = 2.7 V VDD = 5 V A 13 4.5 25C UNIT 1.5 s t(off) Amplifier turnoff time 200 ns Full range is -40C to 125C for the I suffix. Disable time and enable time are defined as the interval between application of the logic signal to SHDN and the point at which the supply current has reached half its final value. POST OFFICE BOX 655303 * DALLAS, TEXAS 75265 7 TLV2620, TLV2621, TLV2622, TLV2623, TLV2624, TLV2625, TLV262xA FAMILY OF LOW-POWER WIDE BANDWIDTH SINGLE SUPPLY OPERATIONAL AMPLIFIERS WITH SHUTDOWN SLOS251B - DECEMBER 2000 - REVISED APRIL 2001 TYPICAL CHARACTERISTICS Table of Graphs FIGURE VIO CMRR Input offset voltage vs Common-mode input voltage Common-mode rejection ratio vs Frequency VOH VOL High-level output voltage vs High-level output current 4, 6 Low-level output voltage vs Low-level output current 5, 7 IDD IDD Supply current vs Supply voltage Supply current vs Free-air temperature 9 PSRR Power supply rejection ratio vs Frequency 10 AVD Differential voltage amplification & phase vs Frequency 11 Gain-bandwidth product vs Free-air temperature 12 vs Supply voltage 1, 2 3 8 13 SR Slew rate m Vn Phase margin vs Load capacitance 16 Equivalent input noise voltage vs Frequency 17 vs Free-air temperature Voltage-follower large-signal pulse response 14, 15 18 Voltage-follower small-signal pulse response 19 Crosstalk vs Frequency 20 IDD(SHDN) IDD(SHDN) Shutdown supply current vs Free-air temperature 21 Shutdown supply current vs Supply voltage 22 IDD(SHDN) Shutdown supply current/output voltage vs Time 23 8 POST OFFICE BOX 655303 * DALLAS, TEXAS 75265 TLV2620, TLV2621, TLV2622, TLV2623, TLV2624, TLV2625, TLV262xA FAMILY OF LOW-POWER WIDE BANDWIDTH SINGLE SUPPLY OPERATIONAL AMPLIFIERS WITH SHUTDOWN SLOS251B - DECEMBER 2000 - REVISED APRIL 2001 TYPICAL CHARACTERISTICS 500 500 VDD = 2.7 V TA = 25 C 400 350 300 250 200 150 100 50 0 400 350 300 250 200 150 100 50 0 -50 -50 -100 -100 0 VDD = 5 V TA = 25 C 450 VIO - Input Offset Voltage - V 0 0.3 0.6 0.9 1.2 1.5 1.8 2.1 2.4 2.7 Figure 2 HIGH-LEVEL OUTPUT VOLTAGE vs HIGH-LEVEL OUTPUT CURRENT LOW-LEVEL OUTPUT VOLTAGE vs LOW-LEVEL OUTPUT CURRENT 100 90 80 70 60 50 40 30 20 10 0 10 1.8 TA = 125C 1.2 TA = 70C 0.9 TA = 25C TA = 0C TA = -40C 0.6 0.3 0 5 10 15 20 25 30 35 40 2.4 2.1 TA = 125C 1.8 TA = 70C 1.5 TA = 25C TA = 0C TA = -40C 1.2 0.9 0.6 0.3 45 VDD = 5 V 4.5 4.0 3.5 TA = 125C 3.0 TA = 70C 2.5 2.0 TA = 25C TA = 0C TA = -40C 1.5 1.0 0.5 0 0 5 10 15 20 25 30 35 40 0 45 IOL - Low-Level Output Current - mA IOH - High-Level Output Current - mA 10 20 30 40 50 60 70 80 90 100 IOH - High-Level Output Current - mA Figure 4 Figure 5 Figure 6 LOW-LEVEL OUTPUT VOLTAGE vs LOW-LEVEL OUTPUT CURRENT SUPPLY CURRENT vs SUPPLY VOLTAGE SUPPLY CURRENT vs FREE-AIR TEMPERATURE 5.0 1100 VDD = 5 V 1000 4.0 TA = 125C 3.5 TA = 70C 3.0 TA = 25C TA = 0C TA = -40C 2.5 2.0 1.5 1.0 0.5 I DD - Supply Current - A/ch 4.5 1000 TA = 125C 900 TA = 70C 800 TA = 25C 700 600 TA = 0C 500 TA = -40C 400 300 200 AV= 1 VIC = VDD/2 100 0 0 0 10 20 30 40 50 60 70 80 90 100 IOL - Low-Level Output Current - mA Figure 7 1M 5.0 VDD = 2.7 V 0 0 1k 10k 100k f - Frequency - Hz HIGH-LEVEL OUTPUT VOLTAGE vs HIGH-LEVEL OUTPUT CURRENT V OH - High-Level Output Voltage - V VOL - Low-Level Output Voltage - V 2.1 1.5 100 Figure 3 2.7 VDD = 2.7 V 2.4 VDD = 2.7 V and 5 V TA = 25 C 110 0.5 1.0 1.5 2.0 2.5 3.0 3.5 4.0 4.5 5.0 Figure 1 2.7 V OH - High-Level Output Voltage - V 120 VICR - Common-Mode Input Voltage - V VICR - Common-Mode Input Voltage - V VOL - Low-Level Output Voltage - V COMMON-MODE REJECTION RATIO vs FREQUENCY 0 0.5 1.0 1 1.5 2.0 2 2.5 3.0 3 3.5 4.0 4 4.5 5.0 5 5.5 6.0 6 VDD - Supply Voltage - V Figure 8 POST OFFICE BOX 655303 * DALLAS, TEXAS 75265 900 I DD - Supply Current - A/ch VIO - Input Offset Voltage - V 450 CMRR - Common-Mode Rejection Ratio - dB INPUT OFFSET VOLTAGE vs COMMON-MODE INPUT VOLTAGE INPUT OFFSET VOLTAGE vs COMMON-MODE INPUT VOLTAGE 800 VDD = 5 V 700 VDD = 2.7 V 600 500 400 300 200 AV= 1 VIC = VDD/2 100 0 -40 -25 -10 5 20 35 50 65 80 95 110 125 TA - Free-Air Temperature - C Figure 9 9 TLV2620, TLV2621, TLV2622, TLV2623, TLV2624, TLV2625, TLV262xA FAMILY OF LOW-POWER WIDE BANDWIDTH SINGLE SUPPLY OPERATIONAL AMPLIFIERS WITH SHUTDOWN SLOS251B - DECEMBER 2000 - REVISED APRIL 2001 TYPICAL CHARACTERISTICS A VD - Differential Voltage Amplification - dB 90 PSSR+ VDD = 2.7 V and 5 V TA = 25 C 80 70 PSSR- 60 50 40 30 20 10 0 10 100 1M 1k 10k 100k f - Frequency - Hz 10M 120 VDD = 2.7 V and 5 V RL= 2 k CL = 10 pF TA = 25 C 110 100 90 80 180 70 60 150 Phase 40 90 60 30 30 20 0 -10 10 -60 -90 100 5 4 3 1 RL = 2 k CL = 10 pF f = 10 kHz 0 -40 -25 -10 5 7 6 5 4 3 1 TA - Free-Air Temperature - C Figure 14 PHASE MARGIN vs LOAD CAPACITANCE m - Phase Margin - SR - Slew Rate - V/s TA - Free-Air Temperature - C Figure 13 SLEW RATE vs FREE-AIR TEMPERATURE 10 15 14 13 12 11 10 SR+ 9 SR- 8 7 6 5 4 3 VDD = 2.7 V 2 AV = 1 1 V(step) = 1 V to 2.2 V 0 -40 -25 -10 5 20 35 50 65 80 95 110 125 VDD - Supply Voltage - V Figure 12 Figure 15 AV = 1 V(step) = 1 V to 2 V TA = 25 C 0 2.7 3.0 3.3 3.6 3.9 4.2 4.5 4.8 5.1 5.4 5.7 6.0 20 35 50 65 80 95 110 125 TA - Free-Air Temperature - C SR- 8 2 15 14 13 12 11 10 SR+ 9 SR- 8 7 6 5 4 3 VDD = 5 V 2 AV = 1 1 V(step) = 1 V to 4.5 V 0 -40 -25 -10 5 20 35 50 65 80 95 110 125 SR - Slew Rate - V/s 6 9 70 65 60 55 50 45 40 35 30 25 20 15 10 5 0 10 Hz 7 SR+ 10 SR - Slew Rate - V/s Gain-Bandwidth Product - MHz 11 8 2 12 VDD = 2.7 V 9 10M SLEW RATE vs FREE-AIR TEMPERATURE SLEW RATE vs SUPPLY VOLTAGE VDD = 5 V 10 1k 10k 100k 1M f - Frequency - Hz Figure 11 GAIN-BANDWIDTH PRODUCT vs FREE-AIR TEMPERATURE 11 0 -30 Gain 10 Figure 10 12 120 50 Rnull = 100 Rnull = 20 Rnull = 0 VDD = 2.7 V and 5 V RL = 2 k AV = 1 TA = 25C 100 CL - Load Capacitance - pF 300 Figure 16 POST OFFICE BOX 655303 * DALLAS, TEXAS 75265 V n - Equivalent Input Noise Voltage - nV/ PSRR - Power Supply Rejection Ratio - dB 100 Phase Margin - DIFFERENTIAL VOLTAGE AMPLIFICATION AND PHASE vs FREQUENCY POWER SUPPLY REJECTION RATIO vs FREQUENCY EQUIVALENT INPUT NOISE VOLTAGE vs FREQUENCY 500 450 VDD = 2.7 V and 5 V TA = 25 C 400 350 300 250 200 150 100 50 0 10 100 1k 10k f - Frequency - Hz Figure 17 100k TLV2620, TLV2621, TLV2622, TLV2623, TLV2624, TLV2625, TLV262xA FAMILY OF LOW-POWER WIDE BANDWIDTH SINGLE SUPPLY OPERATIONAL AMPLIFIERS WITH SHUTDOWN SLOS251B - DECEMBER 2000 - REVISED APRIL 2001 TYPICAL CHARACTERISTICS 4 7 3 2 VIC 5 1 4 VO 3 2 1 0 VDD = 5 V VIC = 3.5 V RL = 2 k CL = 10 pF AV = 1 TA = 25C 2.60 VDD = 2.7 V and 5 V RL = 2 k CL = 10 pF AV = 1 VO(PP) = VDD/2 TA = 25C All Channels 2.50 Shutdown Crosstalk Crosstalk 100 1k 10k f - Frequency - Hz Figure 20 100k Shutdown = 0 V AV = 1 VIC = VDD/2 3.0 VDD = 5 V 2.0 1.5 1.0 VDD = 3.6 V VDD = 2.7 V 0.5 0 -40 -25 -10 5 20 35 50 65 80 95 110 125 TA - Free-Air Temperature - C Figure 21 POST OFFICE BOX 655303 2.40 VO 2.4 -0.10.0 0.0 0.1 0.2 0.2 0.3 0.4 0.40.5 0.6 0.6 0.7 0.8 0.9 1.0 1.1 1.2 1.2 4.0 2.5 2.45 2.45 SHUTDOWN SUPPLY CURRENT vs FREE-AIR TEMPERATURE 3.5 2.50 2.55 Figure 19 -120 -140 10 VIC t - Time - s -80 -100 2.65 Figure 18 I DD(SD) - Shutdown Supply Current - A/ch Crosstalk - dB -60 2.55 VDD = 5 V VIC = 100 mV RL = 2 k CL = 10 pF AV = 1 TA = 25C 2.70 t - Time - s 0 -40 2.75 0 -0.10.00.10.20.30.40.50.60.70.80.91.01.11.21.31.4 0.0 0.2 0.4 0.6 0.8 1.0 1.2 1.4 CROSSTALK vs FREQUENCY -20 2.60 * DALLAS, TEXAS 75265 I DD(SD) - Shutdown Supply Current - A/ch V O - Output Voltage - V 6 2.80 V IC - Common-Mode Input Voltage - V 5 8 V O - Output Voltage - V 9 VOLTAGE-FOLLOWER SMALL-SIGNAL PULSE RESPONSE V IC - Common-Mode Input Voltage - V VOLTAGE-FOLLOWER LARGE-SIGNAL PULSE RESPONSE SHUTDOWN SUPPLY CURRENT vs SUPPLY VOLTAGE 5.0 4.5 4.0 Shutdown = 0 V AV = 1 VIC = VDD/2 3.5 TA = 70C 3.0 TA = 25C 2.5 2.0 TA = 0C 1.5 1.0 TA = -40C TA = 125C 0.5 0 0 0.5 1.0 1 1.5 2.0 2 2.5 3.0 3 3.5 4.0 4 4.5 5.0 5 5.5 6.0 6 VDD - Supply Voltage - V Figure 22 11 TLV2620, TLV2621, TLV2622, TLV2623, TLV2624, TLV2625, TLV262xA FAMILY OF LOW-POWER WIDE BANDWIDTH SINGLE SUPPLY OPERATIONAL AMPLIFIERS WITH SHUTDOWN SLOS251B - DECEMBER 2000 - REVISED APRIL 2001 TYPICAL CHARACTERISTICS SD - Shutdown Pulse - V 2.5 2.0 1.5 1.0 0.5 0.0 I DD(SD) - Shutdown Supply Current - A 5.0 4.0 3.0 2.0 1.0 0.0 V O - Output Voltage - mV SHUTDOWN SUPPLY CURRENT / OUTPUT VOLTAGE vs TIME SD VDD = 5 V AV = 1 RL = 2 k CL = 10 pF VIC = VDD/2 TA = 25 C VO 0.0 0.5 1.0 IDD(SD) 1.5 2.0 0 1 2 3 4 5 t - Time - s 6 7 Figure 23 12 POST OFFICE BOX 655303 * DALLAS, TEXAS 75265 8 9 TLV2620, TLV2621, TLV2622, TLV2623, TLV2624, TLV2625, TLV262xA FAMILY OF LOW-POWER WIDE BANDWIDTH SINGLE SUPPLY OPERATIONAL AMPLIFIERS WITH SHUTDOWN SLOS251B - DECEMBER 2000 - REVISED APRIL 2001 MECHANICAL DATA D (R-PDSO-G**) PLASTIC SMALL-OUTLINE PACKAGE 14 PIN SHOWN 0.050 (1,27) 0.020 (0,51) 0.014 (0,35) 14 0.010 (0,25) M 8 0.008 (0,20) NOM 0.244 (6,20) 0.228 (5,80) 0.157 (4,00) 0.150 (3,81) Gage Plane 0.010 (0,25) 1 7 0- 8 A 0.044 (1,12) 0.016 (0,40) Seating Plane 0.069 (1,75) MAX 0.010 (0,25) 0.004 (0,10) PINS ** 0.004 (0,10) 8 14 16 A MAX 0.197 (5,00) 0.344 (8,75) 0.394 (10,00) A MIN 0.189 (4,80) 0.337 (8,55) 0.386 (9,80) DIM 4040047 / D 10/96 NOTES: A. All linear dimensions are in inches (millimeters). B. This drawing is subject to change without notice. C. Body dimensions do not include mold flash or protrusion, not to exceed 0.006 (0,15). POST OFFICE BOX 655303 * DALLAS, TEXAS 75265 13 TLV2620, TLV2621, TLV2622, TLV2623, TLV2624, TLV2625, TLV262xA FAMILY OF LOW-POWER WIDE BANDWIDTH SINGLE SUPPLY OPERATIONAL AMPLIFIERS WITH SHUTDOWN SLOS251B - DECEMBER 2000 - REVISED APRIL 2001 MECHANICAL INFORMATION DBV (R-PDSO-G5) PLASTIC SMALL-OUTLINE PACKAGE 0,40 0,20 0,95 5 0,25 M 4 1,80 1,50 1 0,15 NOM 3,00 2,50 3 Gage Plane 3,10 2,70 0,25 0- 8 0,55 0,35 Seating Plane 1,30 1,00 0,10 0,05 MIN 4073253-4/B 10/97 NOTES: A. All linear dimensions are in millimeters. B. This drawing is subject to change without notice. C. Body dimensions include mold flash or protrusion. 14 POST OFFICE BOX 655303 * DALLAS, TEXAS 75265 TLV2620, TLV2621, TLV2622, TLV2623, TLV2624, TLV2625, TLV262xA FAMILY OF LOW-POWER WIDE BANDWIDTH SINGLE SUPPLY OPERATIONAL AMPLIFIERS WITH SHUTDOWN SLOS251B - DECEMBER 2000 - REVISED APRIL 2001 MECHANICAL INFORMATION DBV (R-PDSO-G6) PLASTIC SMALL-OUTLINE 0,95 6X 6 0,50 0,25 0,20 M 4 1,70 1,50 1 0,15 NOM 3,00 2,60 3 Gage Plane 3,00 2,80 0,25 0-8 0,55 0,35 Seating Plane 1,45 0,95 0,05 MIN 0,10 4073253-5/F 10/00 NOTES: A. B. C. D. All linear dimensions are in millimeters. This drawing is subject to change without notice. Body dimensions do not include mold flash or protrusion. Leads 1, 2, 3 are wider than leads 4, 5, 6 for package orientation. POST OFFICE BOX 655303 * DALLAS, TEXAS 75265 15 TLV2620, TLV2621, TLV2622, TLV2623, TLV2624, TLV2625, TLV262xA FAMILY OF LOW-POWER WIDE BANDWIDTH SINGLE SUPPLY OPERATIONAL AMPLIFIERS WITH SHUTDOWN SLOS251B - DECEMBER 2000 - REVISED APRIL 2001 MECHANICAL INFORMATION DGK (R-PDSO-G8) PLASTIC SMALL-OUTLINE PACKAGE 0,38 0,25 0,65 8 0,25 M 5 0,15 NOM 3,05 2,95 4,98 4,78 Gage Plane 0,25 1 0- 6 4 3,05 2,95 0,69 0,41 Seating Plane 1,07 MAX 0,15 0,05 0,10 4073329/B 04/98 NOTES: A. B. C. D. 16 All linear dimensions are in millimeters. This drawing is subject to change without notice. Body dimensions do not include mold flash or protrusion. Falls within JEDEC MO-187 POST OFFICE BOX 655303 * DALLAS, TEXAS 75265 TLV2620, TLV2621, TLV2622, TLV2623, TLV2624, TLV2625, TLV262xA FAMILY OF LOW-POWER WIDE BANDWIDTH SINGLE SUPPLY OPERATIONAL AMPLIFIERS WITH SHUTDOWN SLOS251B - DECEMBER 2000 - REVISED APRIL 2001 MECHANICAL INFORMATION DGS (S-PDSO-G10) PLASTIC SMALL-OUTLINE PACKAGE 0,27 0,17 0,50 10 0,25 M 6 0,15 NOM 3,05 2,95 4,98 4,78 Gage Plane 0,25 1 0- 6 5 3,05 2,95 0,69 0,41 Seating Plane 1,07 MAX 0,15 0,05 0,10 4073272/A 03/98 NOTES: A. All linear dimensions are in millimeters. B. This drawing is subject to change without notice. C. Body dimensions do not include mold flash or protrusion. POST OFFICE BOX 655303 * DALLAS, TEXAS 75265 17 TLV2620, TLV2621, TLV2622, TLV2623, TLV2624, TLV2625, TLV262xA FAMILY OF LOW-POWER WIDE BANDWIDTH SINGLE SUPPLY OPERATIONAL AMPLIFIERS WITH SHUTDOWN SLOS251B - DECEMBER 2000 - REVISED APRIL 2001 MECHANICAL INFORMATION N (R-PDIP-T**) PLASTIC DUAL-IN-LINE PACKAGE 16 PIN SHOWN PINS ** 14 16 18 20 A MAX 0.775 (19,69) 0.775 (19,69) 0.920 (23.37) 0.975 (24,77) A MIN 0.745 (18,92) 0.745 (18,92) 0.850 (21.59) 0.940 (23,88) DIM A 16 9 0.260 (6,60) 0.240 (6,10) 1 8 0.070 (1,78) MAX 0.035 (0,89) MAX 0.310 (7,87) 0.290 (7,37) 0.020 (0,51) MIN 0.200 (5,08) MAX Seating Plane 0.125 (3,18) MIN 0.100 (2,54) 0.021 (0,53) 0.015 (0,38) 0.010 (0,25) M 0- 15 0.010 (0,25) NOM 14/18 PIN ONLY 4040049/C 08/95 NOTES: A. All linear dimensions are in inches (millimeters). B. This drawing is subject to change without notice. C. Falls within JEDEC MS-001 (20 pin package is shorter then MS-001.) 18 POST OFFICE BOX 655303 * DALLAS, TEXAS 75265 TLV2620, TLV2621, TLV2622, TLV2623, TLV2624, TLV2625, TLV262xA FAMILY OF LOW-POWER WIDE BANDWIDTH SINGLE SUPPLY OPERATIONAL AMPLIFIERS WITH SHUTDOWN SLOS251B - DECEMBER 2000 - REVISED APRIL 2001 MECHANICAL INFORMATION P (R-PDIP-T8) PLASTIC DUAL-IN-LINE PACKAGE 0.400 (10,60) 0.355 (9,02) 8 5 0.260 (6,60) 0.240 (6,10) 1 4 0.070 (1,78) MAX 0.310 (7,87) 0.290 (7,37) 0.020 (0,51) MIN 0.200 (5,08) MAX Seating Plane 0.125 (3,18) MIN 0.100 (2,54) 0.021 (0,53) 0.015 (0,38) 0- 15 0.010 (0,25) M 0.010 (0,25) NOM 4040082 / B 03/95 NOTES: A. All linear dimensions are in inches (millimeters). B. This drawing is subject to change without notice. C. Falls within JEDEC MS-001 POST OFFICE BOX 655303 * DALLAS, TEXAS 75265 19 TLV2620, TLV2621, TLV2622, TLV2623, TLV2624, TLV2625, TLV262xA FAMILY OF LOW-POWER WIDE BANDWIDTH SINGLE SUPPLY OPERATIONAL AMPLIFIERS WITH SHUTDOWN SLOS251B - DECEMBER 2000 - REVISED APRIL 2001 MECHANICAL INFORMATION PW (R-PDSO-G**) PLASTIC SMALL-OUTLINE PACKAGE 14 PINS SHOWN 0,30 0,19 0,65 14 0,10 M 8 0,15 NOM 4,50 4,30 6,60 6,20 Gage Plane 0,25 1 7 0- 8 A 0,75 0,50 Seating Plane 0,15 0,05 1,20 MAX PINS ** 0,10 8 14 16 20 24 28 A MAX 3,10 5,10 5,10 6,60 7,90 9,80 A MIN 2,90 4,90 4,90 6,40 7,70 9,60 DIM 4040064/F 01/97 NOTES: A. B. C. D. 20 All linear dimensions are in millimeters. This drawing is subject to change without notice. Body dimensions do not include mold flash or protrusion not to exceed 0,15. Falls within JEDEC MO-153 POST OFFICE BOX 655303 * DALLAS, TEXAS 75265 IMPORTANT NOTICE Texas Instruments and its subsidiaries (TI) reserve the right to make changes to their products or to discontinue any product or service without notice, and advise customers to obtain the latest version of relevant information to verify, before placing orders, that information being relied on is current and complete. All products are sold subject to the terms and conditions of sale supplied at the time of order acknowledgment, including those pertaining to warranty, patent infringement, and limitation of liability. TI warrants performance of its products to the specifications applicable at the time of sale in accordance with TI's standard warranty. Testing and other quality control techniques are utilized to the extent TI deems necessary to support this warranty. Specific testing of all parameters of each device is not necessarily performed, except those mandated by government requirements. Customers are responsible for their applications using TI components. In order to minimize risks associated with the customer's applications, adequate design and operating safeguards must be provided by the customer to minimize inherent or procedural hazards. TI assumes no liability for applications assistance or customer product design. TI does not warrant or represent that any license, either express or implied, is granted under any patent right, copyright, mask work right, or other intellectual property right of TI covering or relating to any combination, machine, or process in which such products or services might be or are used. TI's publication of information regarding any third party's products or services does not constitute TI's approval, license, warranty or endorsement thereof. Reproduction of information in TI data books or data sheets is permissible only if reproduction is without alteration and is accompanied by all associated warranties, conditions, limitations and notices. Representation or reproduction of this information with alteration voids all warranties provided for an associated TI product or service, is an unfair and deceptive business practice, and TI is not responsible nor liable for any such use. Resale of TI's products or services with statements different from or beyond the parameters stated by TI for that product or service voids all express and any implied warranties for the associated TI product or service, is an unfair and deceptive business practice, and TI is not responsible nor liable for any such use. Also see: Standard Terms and Conditions of Sale for Semiconductor Products. www.ti.com/sc/docs/stdterms.htm Mailing Address: Texas Instruments Post Office Box 655303 Dallas, Texas 75265 Copyright 2001, Texas Instruments Incorporated