Multilayer Ceramic Capacitors Approval Sheet MULTILAYER CERAMIC CAPACITORS Middle & High Voltage Series (200V to 4kV) 0402 to 1812 Sizes NP0, X7R & Y5V Dielectrics Halogen Free & RoHS compliance *Contents in this sheet are subject to change without prior notice. Page 1 of 13 ASC_Middle & High Voltage_003AE Aug. 2018 Multilayer Ceramic Capacitors Approval Sheet 1. INTRODUCTION WTC middle and high voltage series MLCC is designed by a special internal electrode pattern, which can reduce voltage concentrations by distributing voltage gradients throughout the entire capacitor. This special design also affords increased capacitance values in a given case size and voltage rating. Chips size 1206 and larger to use on reflow soldering process only. Capacitors with X7R dielectrics are not intended for AC line filtering applications. Capacitors may require protective surface coating to prevent external arcing. 2. FEATURES 3. APPLICATIONS a. b. a. b. c. d. High voltage in a given case size. High stability and reliability. Snubbers in high frequency power converters. High voltage coupling/DC blocking. DC-DC converters. Back-lighting inverters 4. HOW TO ORDER 1808 N 100 J 202 C T Size Dielectric Capacitance Tolerance Rated voltage Termination Packaging Inch (mm) 0402 (1005) 0603 (1608) 0805 (2012) 1206 (3216) 1210 (3225) 1808 (4520) 1812 (4532) Page 2 of 13 N=NP0 (C0G) B=X7R F=Y5V Two significant digits followed by no. of zeros. And R is in place of decimal point. eg.: 0R5=0.5pF 1R0=1.0pF 100=10x100 =10pF B=0.1pF C=0.25pF D=0.5pF F=1% G=2% J=5% K=10% M=20% Z=-20/+80% Two significant digits C=Cu/Ni/Sn followed by no. of zeros. And R is in place of decimal point. T=7" reeled G=13" reeled 201=200 VDC 251=250 VDC 401=400 VDC 451=450 VDC 501=500 VDC 631=630 VDC 102=1000 VDC 152=1500 VDC 202=2000 VDC 252=2500 VDC 302=3000 VDC 402=4000 VDC ASC_Middle & High Voltage_003AE Aug. 2018 Multilayer Ceramic Capacitors Approval Sheet 5. EXTERNAL DIMENSIONS Size Inch (mm) L (mm) W (mm) 0402 (1005) 1.000.05 0.500.05 0.500.05 N 0.800.10 0.80 +0.15/-0.10 2.000.15 1.250.10 2.000.20 1.250.20 3.200.15 1.600.15 3.200.20 1.600.20 3.200.30 2.500.20 3.200.40 2.500.30 3.200.60** 2.500.50** 1808 (4520) 4.50+0.5/-0.3 2.030.25 1812 (4532) 4.50+0.5/-0.3 0.800.07 0.80 +0.15/-0.10 0.600.10 0.800.10 1.250.10 1.250.20 0.800.10 0.950.10 1.250.10 1.600.20 0.950.10 1.250.10 1.600.20 2.000.20 2.500.30 2.500.50** 1.250.10 2.000.20 1.250.10 1.600.20 2.000.20 2.500.30 2.800.30 S 0603(1608) 1.600.10 1.60 +0.15/-0.10 0805 (2012) 1206 (3216) 1210 (3225) 3.200.30 3.200.40 T (mm)/Symbol Remark MB (mm) # 0.25 +0.05/-0.10 T 0.400.15 X A B D I B C D G C D G K L W MB # # # # # # # # # M # D K D G K M U # # # # # # # 0.500.20 MB Fig. 1 The outline of MLCC 0.600.20 (0.50.25)* 0.750.25 0.500.25 0.500.25 # Reflow soldering only is recommended. * For 1206_1000V ~3000V products. ** For 1210(100V)/Cap>1F or 1210(250V)/Cap>0.47F or 1210(400V~630V)/Cap>0.22F 6. GENERAL ELECTRICAL DATA Dielectric Size Capacitance* Capacitance tolerance*** NP0 0.1pF to 0.033F Cap5pF: C (0.25pF) 5pF<Cap<10pF: D (0.5pF) Cap10pF: F (1%), G (2%), J (5%),K (10%) Rated voltage (WVDC) Q/DF* Insulation resistance at Ur** Dielectric strength Cap<30pF: Q400+20C Cap30pF: Q1000 Termination Y5V 0805, 1206, 1210, 1812 100pF to 1.0F 0.01F to 0.68F K (10%), M (20%) Z (-20/+80%) 200V to 4000V 200V, 250V DF2.5% DF5% Ur=200~630V: 10G or RxC100-F whichever is smaller Ur=1000~3000V: 10G 200~300V: 2 x WVDC 400V~450V: 1.2 x WVDC 500~999V: 1.5 x WVDC 1000~3000V: 1.2 x WVDC 4000: 1.1 x WVDC Operating temperature Capacitance characteristic X7R 0402, 0603, 0805, 1206, 1210, 1808, 1812 -55 to +125C 30ppm -25 to +85C 15% +30/-80% Ni/Sn (lead-free termination) * Measured at the condition of 30~70% related humidity. NP0: Apply 1.00.2Vrms, 1.0MHz10% for Cap1000pF and 1.00.2Vrms, 1.0kHz10% for Cap>1000pF, 25C at ambient temperature X7R, X5R: Apply 1.00.2Vrms, 1.0kHz10%, at 25C am bient temperature. Y5V: Apply 1.00.2Vrms, 1.0kHz10%, at 20C ambient temperature. ** Preconditioning for Class II MLCC: Perform a heat treatment at 15010C for 1 hour, then leave in a mbient condition for 242 hours before measurement. Page 3 of 13 ASC_Middle & High Voltage_003AE Aug. 2018 Multilayer Ceramic Capacitors Approval Sheet 7. CAPACITANCE RANGE (MIDDLE VOLTAGE - 200V to 630V) 7-1 NP0 Dielectric DIELECTRIC SIZE 0402 0603 0805 NP0 1206 1210 1808 1812 Capacitance RATED VOLTAGE 200 250 200 250 200 250 500 630 200 250 500 630 200 250 500 630 500 630 200 250 500 630 (VDC) 0.1pF (0R1) N N 0.2pF (0R2) N N 0.3pF (0R3) N N 0.4pF (0R4) N N 0.5pF (0R5) N N S S A A A A 1.0pF (1R0) N N S S A A A A 1.2pF (1R2) N N S S A A A A 1.5pF (1R5) N N S S A A A A B B B B 1.8pF (1R8) N N S S A A A A B B B B D D 2.2pF (2R2) N N S S A A A A B B B B D D 2.7pF (2R7) N N S S A A A A B B B B D D 3.3pF (3R3) N N S S A A A A B B B B D D 3.9pF (3R9) N N S S A A A A B B B B D D 4.7pF (4R7) N N S S A A A A B B B B D D 5.6pF (5R6) N N S S A A A A B B B B D D 6.8pF (6R8) N N S S A A A A B B B B D D 8.2pF (8R2) N N S S A A A A B B B B D D 10pF (100) N N S S A A A A B B B B C C C C D D D D D D 12pF (120) N N S S A A A A B B B B C C C C D D D D D D 15pF (150) N N S S A A A A B B B B C C C C D D D D D D 18pF (180) N N S S A A A A B B B B C C C C D D D D D D 22pF (220) N N S S A A A A B B B B C C C C D D D D D D 27pF (270) N N S S A A A A B B B B C C C C D D D D D D 33pF (330) N N S S A A A A B B B B C C C C D D D D D D 39pF (390) N N S S A A A A B B B B C C C C D D D D D D 47pF (470) N N S S A A A A B B B B C C C C D D D D D D 56pF (560) N N S S A A A A B B B B C C C C D D D D D D 68pF (680) N S S A A A A B B B B C C C C D D D D D D 82pF (820) N S S A A B B B B B B C C C C D D D D D D 100pF (101) N S S A B B B B B B B C C C C D D D D D D 120pF (121) S S A B D D B B B B C C C C D D D D D D 150pF (151) S S B D D D B B B B C C C C D D D D D D 180pF (181) S S B D D D B B B B C C C C D D D D D D 220pF (221) S S D D D D B B B B C C C C D D D D D D 270pF (271) X X D D D D B C C C C C C C K K D D D D 330pF (331) X X D D D D B C C C C C C C K K D D D D 390pF (391) X X D D D D B C C C C C C C K K D D D D 470pF (471) X X D D I I C C C C C C C C K K D D D D 560pF (561) X X D D I I C D D D C C C C K K D D D D 680pF (681) D D I I C D D D C C C C K K D D D D 820pF (821) D D I I C G G G C C C C K K D D D D 1,000pF (102) D D I I C G G G D D D D K K D D D D 1,200pF (122) D D C G G G D D D D K K D D D D 1,500pF (152) D D D G G G D D D D K K D D D D 1,800pF (182) D D D G G G D D D D K K D D D D 2,200pF (222) D D D G G G D D D D K K D D D D 2,700pF (272) D G G G D D D D K K D D D D 3,300pF (332) D G G G D D D D K K D D D D 3,900pF (392) D G G G D D D D D D D D 4,700pF (472) D G G G G G D D D D 5,600pF (562) G G D D D D 6,800pF (682) G G D D D D 8,200pF (822) G G D D 0.010F (103) G G D D 0.012F (123) K G G 0.015F (153) M G G 0.018F (183) M K K 0.022F (223) M K K 0.033F (333) 1. The letter in cell is expressed the symbol of product thickness. Page 4 of 13 ASC_Middle & High Voltage_003AE Aug. 2018 Multilayer Ceramic Capacitors Approval Sheet 7-2 X7R Dielectric Capacitance DIELECTRIC SIZE RATED VOLTAGE (VDC) 100pF (101) 120pF (121) 150pF (151) 180pF (181) 220pF (221) 270pF (271) 330pF (331) 390pF (391) 470pF (471) 560pF (561) 680pF (681) 820pF (821) 1,000pF (102) 1,200pF (122) 1,500pF (152) 1,800pF (182) 2,200pF (222) 2,700pF (272) 3,300pF (332) 3,900pF (392) 4,700pF (472) 5,600pF (562) 6,800pF (682) 8,200pF (822) 0.010F (103) 0.012F (123) 0.015F (153) 0.018F (183) 0.022F (223) 0.027F (273) 0.033F (333) 0.039F (393) 0.047F (473) 0.056F (563) 0.068F (683) 0.082F (823) 0.10F (104) 0.12F (124) 0.15F (154) 0.18F (184) 0.22F (224) 0.27F (274) 0.33F (334) 0.39F (394) 0.47F (474) 0.56F (564) 0.68F (684) 0.82F (824) 1.0F (105) X7R 0603 0805 1206 1808 1210 1812 200 250 200 250 500 630 200 250 400 450 500 630 200 250 400 450 500 630 500 630 200 250 500 630 X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X B B B B B B B B B B B B B B B B B B B B B D D D D D D D D D D D D D D D D B B B B B B B B B B B B B B B B B B B B B D D D D D D D D D D D D D D B B B B B B B B B B B B B B B B B B B B D D D D D D D D D D D B B B B B B B B B B B B B B B B B B B B D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D G G G G G G G G G G G D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D G G G G G G G G G G G D D D D D D D D D D D D D D D D D D D D D D D D D D D D G G G G G G G G G G G G D D D D D D D D D D D D D D D D D D D D D D D D D D D D G G G G G G D D D D D D D D D D C C C C C C C C C C C C C C C C C C C C C C D D G G G G M M M M M M M M M D D D D D D D D D D C C C C C C C C C C C C C C C C C C C C C C D D G G G G M M M M M M M M M D D D D D D D D D D D D D D D D D D D D D D D D D D D D D G G G G G K K K M M M M M M M M M M M M D D D D D D D D D D D D D D D D D D D D D D D D D D D D D G G G G G K K K D D D D D D D D D D D D D D D D D D D K K K K K K K K K K K K K K K D D D D D D D D D D D D D D D D D D D K K K K K K K K K K K K K K K D D D D D D D D D D D D D D D D D D D D D D D D D D K K K K K K K M M M M D D D D D D D D D D D D D D D D D D D D D D D D D D K K K K K K K M M M M D D D D D D D D D D D D D D D D D D D D D K K K K M M M M M M M M 1. The letter in cell is expressed the symbol of product thickness. Page 5 of 13 ASC_Middle & High Voltage_003AE Aug. 2018 D D D D D D D D D D D D D D D D D D D D D K K K K M M M M Multilayer Ceramic Capacitors Approval Sheet 7-3 Y5V Dielectric Capacitance DIELECTRIC SIZE RATED VOLTAGE (VDC) 0.010F (103) 0.015F (153) 0.022F (223) 0.033F (333) 0.047F (473) 0.068F (683) 0.10F (104) 0.15F (154) 0.22F (224) 0.33F (334) 0.47F (474) 0.68F (684) 1.0F (105) Y5V 0805 200 B B B B B B 1206 250 B B B B B B 200 B B B B B B B C 1210 250 B B B B B B B C 200 C C C C C C C C 1812 250 C C C C C C C C 200 D D D D D D D D D D D D 250 D D D D D D D D D D D D 1. The letter in cell is expressed the symbol of product thickness. Page 6 of 13 ASC_Middle & High Voltage_003AE Aug. 2018 Multilayer Ceramic Capacitors Approval Sheet 8. CAPACITANCE RANGE (HIGH VOLTAGE - 1kV to 4kV) 8-1 NP0 Dielectric Capacitance DIELECTRIC SIZE RATED VOLTAGE 0.5pF (0R5) 1.0pF (1R0) 1.2pF (1R2) 1.5pF (1R5) 1.8pF (1R8) 2.0pF (2R0) 2.2pF (2R2) 2.7pF (2R7) 3.3pF (3R3) 3.9pF (3R9) 4.7pF (4R7) 5.6pF (5R6) 6.8pF (6R8) 8.2pF (8R2) 10pF (100) 12pF (120) 15pF (150) 18pF (180) 22pF (220) 27pF (270) 33pF (330) 39pF (390) 47pF (470) 56pF (560) 68pF (680) 82pF (820) 100pF (101) 120pF (121) 150pF (151) 180pF (181) 220pF (221) 270pF (271) 330pF (331) 390pF (391) 470pF (471) 560pF (561) 680pF (681) 820pF (821) 1,000pF (102) 1,200pF (122) 1,500pF (152) 1,800pF (182) 2,200pF (222) 2,700pF (272) 3,300pF (332) 3,900pF (392) 0805 1000 D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D NP0 1206 1210 1808 1812 1000 1500 2000 1000 1500 2000 1000 1500 2000 3000 4000 1000 1500 2000 3000 4000 B B B B B B B B B B B B B B B B B B B C C C D D D D G G G G G G G G G G B B B B B B B B B B B B B B B B B C C C D D D D G G G G P P P B B B B B B B B B B B B B B B B B C C C D D D D G G G G P P P C C C C C C C C C C C C D D D D G G G G G G G G G G K M M M M M C C C C C C C C C D D D D D G G G K K M M C C C C C C C C C D D D D D G G G K K M M D D D D D D D D D D D D D D D D D D D D D D D D D D G G K K K K K/D K/G G G K K D D D D D D D D D D D D D D D D D D D D D D D K K K K K K K K K D G G K D D D D D D D D D D D D D D D D D D D D D K K K K K K K K K K K D G G K D D D D D D D D D D D D D D D D D D D D D K K K K K K K D D D D D D D D D D D D D D D D D D D D K K K K K K K K K K K M D D D D D D D D D D D D D D D D D K K K K K K K K D D D D D D D D D D D D D D D K K K K K K K K K K D D D D D D D D D D D D D D D K K K K K K 1. The letter in cell is expressed the symbol of product thickness. Page 7 of 13 ASC_Middle & High Voltage_003AE Aug. 2018 Multilayer Ceramic Capacitors Approval Sheet 8-2 X7R Dielectric Capacitance DIELECTRIC X7R SIZE 0805 1206 1210 1808 1812 RATED VOLTAGE 1000 1000 1500 2000 2500 1000 1500 2000 1000 1500 2000 3000 4000 1000 1500 2000 3000 4000 100pF (101) B D D D D D D D 120pF (121) B D D D D D D D 150pF (151) B D D D D D D D D D D D K 180pF (181) B D D D D D D D D D D D K 220pF (221) B D D D D D D D D D D D K 270pF (271) B D D D D D D D D D D D K D D D K K 330pF (331) B D D D D D D D D D D K K D D D K K 390pF (391) B D D D D D D D D D D K K D D D K K 470pF (471) B D D D D D D D D D D K K D D D K K 560pF (561) B D D D D D D D D D D K K D D D K K 680pF (681) B D D D D D D D D D D K K D D D K K 820pF (821) B D D D D D D D D D D K K D D D K K B/C 1,000pF (102) B D D D D D D D K K K K D D D K K /D/G 1,200pF (122) B D G G G D M M D K K K D D D K M 1,500pF (152) D D G G G D M M D K K K D D D K M 1,800pF (182) D D G G G D M M D K K K D D D M M 2,200pF (222) D D G G G D M M D K K K D D D M 2,700pF (272) D D G G D M M D K K K D D D M 3,300pF (332) D D G G D M M D K K K D K K M 3,900pF (392) D D G G M M D K K D K K M 4,700pF (472) D D G G M M D K K D K K M 5,600pF (562) D D G G M M K K K D M M M 6,800pF (682) D D G G M M K K K D M M M 8,200pF (822) D D G G M M K K K D M M 0.010F (103) D D G G M K K K D M M 0.012F (123) G G K K M M 0.015F (153) G G K K M M 0.018F (183) G K M M M 0.022F (223) G K M M M 0.033F (333) G K M 0.039F (393) K K M 0.047F (473) M K M 0.056F (563) K M 0.068F (683) M 0.10F (104) M 1. The letter in cell is expressed the symbol of product thickness. 9. PACKAGING DIMENSION AND QUANTITY Size 0402 0603 0805 1206 1210 1808 1812 Page 8 of 13 Thickness/Symbol (mm) 0.500.05 N 0.800.07 S 0.80 +0.15/-0.10 X 0.600.10 A 0.800.10 B 1.250.10 D 1.250.20 I 0.800.10 B 0.950.10 C 1.250.10 D 1.600.20 G 0.950.10 C 1.250.10 D 1.600.20 G 2.000.20 K 2.500.30 M 1.250.10 D 2.000.20 K 1.250.10 D 1.600.20 G 2.000.20 K 2.500.30 M Paper tape 7" reel 10k 4k 4k 4k 4k 4k - Plastic tape 13" reel 50k 15k 15k 15k 15k 15k - ASC_Middle & High Voltage_003AE 7" reel - 13" reel - 3k 3k 3k 3k 2k 3k 3k 2k 1k 1k 2k 1k 1k 1k 1k 0.5k 10k 10k 10k 10k 10k 10k 10k 6k 6k 10k 6k 5k 3k Aug. 2018 Multilayer Ceramic Capacitors Approval Sheet Unit: pieces 10. RELIABILITY TEST CONDITIONS AND REQUIREMENTS No. 1. Item Visual and Test Condition --- * No remarkable defect. Capacitance Class I: (NP0) * Shall not exceed the limits given in the detailed spec. Q/ D.F. Cap1000pF, 1.00.2Vrms, 1MHz10% Mechanical 2. 3. Requirements (Dissipation Factor) * Dimensions to conform to individual specification sheet. Cap>1000pF, 1.00.2Vrms, 1KHz10% NP0: Cap30pF, Q1000; Cap<30pF, Q400+20C X7R: 2.5% Y5V: 5.0% Class II: (X7R, Y5V) 1.00.2Vrms, 1kHz10% *Before initial measurement (Class II only): To apply de-aging at 150C for 1hr then set for 242 hrs at room temp . 4. Dielectric Strength * To apply voltage: 200V~300V 2 times VDC * No evidence of damage or flash over during test. 1.2 times VDC 400V~450V 1.5 times VDC 500V~999V 1000V~3000V 4000V 1.2 times VDC 1.1 times VDC * Duration: 1 to 5 sec. * Charge & discharge current less than 50mA. 5. 6. 10G or RxC100-F whichever is smaller Insulation Rated voltage: To apply rated voltage (500V max.) Resistance 200~630V for 60 sec. Temperature With no electrical load. Coefficient T.C. Operating Temp T.C. Capacitance Change NP0 -55~125C at 25C NP0 Within 30ppm/C X7R -55~125C at 25C X7R Within 15% Y5V -25~85C at 20C Y5V Within +30%/-80% Rated voltage: 630V To apply 500V for 60 sec. *Before initial measurement (Class II only): To apply de-aging at 150C for 1hr then set for 242 hrs at room temp . 7. Adhesive Strength of 8. * Pressurizing force * No remarkable damage or removal of the terminations. 5N (0603) and 10N (>0603) Termination * Test time: 101 sec. Vibration * Vibration frequency: 10~55 Hz/min. * No remarkable damage. Resistance * Total amplitude: 1.5mm * Cap change and Q/D.F.: To meet initial spec. * Test time: 6 hrs. (Two hrs each in three mutually perpendicular directions.) *Before initial measurement (Class II only): To apply de-aging at 150C for 1hr then set for 242 hrs at room temp . *Cap./DF(Q) Measurement to be made after de-aging at 150C for 1hr then set for 242 hrs at room temp. 9. Solderability * Solder temperature: 2355C 95% min. coverage of all metalized area. * Dipping time: 20.5 sec. 10. Bending Test * The middle part of substrate shall be pressurized by means * No remarkable damage. of the pressurizing rod at a rate of about 1 mm per second until * Cap change the deflection becomes 1 mm and then the pressure shall be 11. Resistance to NP0: within 5.0% or 0.5pF whichever is larger. maintained for 51 sec. X7R: within 12.5% *Before initial measurement (Class II only): To apply de-aging Y5V: within 30% at 150C for 1hr then set for 242 hrs at room temp . (This capacitance change means the change of capacitance under * Measurement to be made after keeping at room temp. for specified flexure of substrate from the capacitance measured before 242 hrs. the test.) * Solder temperature: 2605C * No remarkable damage. Soldering Heat * Dipping time: 101 sec * Preheating: 120 to 150C for 1 minute before imme rse the capacitor in a eutectic solder. * Cap change: NP0: within 2.5% or 0.25pF whichever is larger. X7R: within 7.5% *Before initial measurement (Class II only): To apply de-aging at 150C for 1hr then set for 242 hrs at room temp . Y5V: within 20% * Q/D.F., I.R. and dielectric strength: To meet initial requirements. *Cap. / DF(Q) / I.R. Measurement to be made after de-aging at * 25% max. leaching on each edge. 150C for 1hr then set for 242 hrs at room temp. Page 9 of 13 ASC_Middle & High Voltage_003AE Aug. 2018 Multilayer Ceramic Capacitors No. 12. Approval Sheet Item Temperature Cycle Test Condition Requirements * Conduct the five cycles according to the temperatures and time. Step Temp. (C) Time (min.) 1 Min. operating temp. +0/-3 303 2 Room temp. 2~3 3 Max. operating temp. +3/-0 303 4 Room temp. 2~3 * No remarkable damage. * Cap change NP0: within 2.5 or 0.25pF whichever is larger. X7R: within 7.5% Y5V: within 20% * Q/D.F., I.R. and dielectric strength: To meet initial requirements. *Before initial measurement (Class II only): To apply de-aging at 150C for 1hr then set for 242 hrs at room temp . * Cap. / DF(Q) / I.R. Measurement to be made after de-aging at 150C for 1hr then set for 242 hrs at room temp . 13. Humidity * Test temp.: 402C * No remarkable damage. (Damp Heat) * Humidity: 90~95% RH * Cap change: NP0: within 5.0% or 0.5pF whichever is larger. Steady State * Test time: 500+24/-0hrs. X7R: within 12.5% *Before initial measurement (Class II only): To apply de-aging at 150C for 1hr then set for 242 hrs at room temp . * Cap. / DF(Q) / I.R. Measurement to be made after de-aging at 150C for 1hr then set for 242 hrs at room temp . Y5V: within 30% * Q/D.F. value: NP0: Cap30pF, Q350; 10pFCap<30pF, Q275+2.5C Cap<10pF; Q200+10C X7R: 3.0% Y5V: 7.5% * I.R.: 1G or RxC50-F whichever is smaller. 14. Humidity * Test temp.: 402C * No remarkable damage. (Damp Heat) * Humidity: 90~95%RH * Cap change: NP0: within 7.5% or 0.75pF whichever is larger. Load * Test time: 500+24/-0 hrs. X7R: within 12.5% * To apply voltagerated voltage (Max. 500V) Y5V: within 30% *Before initial measurement (Class II only): To apply de-aging * Q/D.F. value: at 150C for 1hr then set for 242 hrs at room temp . * Cap. / DF(Q) / I.R. Measurement to be made after de-aging at 150C for 1hr then set for 242 hrs at room temp . 15. High NP0, X7R: 1253C Load Y5V: 853C (Endurance) X7R: 3.0% Y5V: 7.5% * I.R.: 500M or RxC25-F whichever is smaller. * No remarkable damage. * Test temp.: Temperature NP0: Cap30pF, Q200; Cap<30pF, Q100+10/3C * Cap change: NP0: within 3.0% or 0.3pF whichever is larger. X7R: within 12.5% Y5V: within 30% * To apply voltage: (1) 1206/NP0 (3kV) 1.5pF: 100% of rated voltage. (2) 200V~300V: 200% of rated voltage. (3) 400V~450V: 120% of rated voltage. * Q/D.F. value: NP0: Cap30pF, Q350 10pFCap<30pF, Q275+2.5C Cap<10pF, Q200+10C (4) 500V: 150% of rated voltage. (5) 630V~3000V: 120% of rated voltage. (6) 4000V: 110% of rated voltage. X7R: 3.0% Y5V: 7.5% * I.R.: 1G or RxC50-F whichever is smaller. * Test time: 1000+24/-0 hrs. *Before initial measurement (Class II only): To apply de-aging at 150C for 1hr then set for 242 hrs at room temp . * Cap. / DF(Q) / I.R. Measurement to be made after de-aging at 150C for 1hr then set for 242 hrs at room temp. Page 10 of 13 ASC_Middle & High Voltage_003AE Aug. 2018 Multilayer Ceramic Capacitors Approval Sheet APPENDIXES Tape & reel dimensions Fig. 2 The dimension of paper tape Fig. 3 The dimension of plastic tape Size 0201 0402 0603 0805 1206 1210 1808 1812 Thickness L N,E S,H,X A,H B,T D,I B,T C,J,D G,P T C,D,G, K M D,F, G,K D,F, G,K A0 0.40 +/-0.10 0.70 +/-0.20 1.05 +/-0.30 1.50 +/-0.20 1.50 +/-0.20 < 1.80 1.90 +/-0.50 < 2.00 <2.30 < 3.05 < 3.05 < 3.20 < 2.50 < 3.90 < 3.90 B0 0.70 +/-0.10 1.20 +/-0.20 1.80 +/-0.30 2.30 +/-0.20 2.30 +/-0.20 < 2.70 3.50 +/-0.50 < 3.70 < 4.00 < 3.80 < 3.80 <4.00 < 5.30 < 5.30 < 5.30 1.20 0.23 +/-0.1 1.20 0.23 +/-0.1 0.23 +/-0.1 0.23 +/-0.1 0.23 +/-0.1 0.23 +/-0.1 0.25 +/-0.1 0.25 +/-0.1 0.25 +/-0.1 T 0.55 0.80 1.20 1.15 M,U K0 - - - - - < 2.50 - < 2.50 < 2.50 < 1.50 < 2.50 < 3.20 < 2.50 < 2.50 < 3.50 W 8.00 +/-0.30 4.00 +/-0.10 8.00 +/-0.30 4.00 +/-0.10 8.00 +/-0.30 4.00 +/-0.10 8.00 +/-0.30 4.00 +/-0.10 8.00 +/-0.30 4.00 +/-0.10 8.00 +/-0.30 4.00 +/-0.10 8.00 +/-0.30 4.00 +/-0.10 8.00 +/-0.30 4.00 +/-0.10 8.00 +/-0.30 4.00 +/-0.10 8.00 +/-0.30 4.00 +/-0.10 8.00 +/-0.30 4.00 +/-0.10 8.00 +/-0.30 4.00 +/-0.10 12.00 +/-0.30 4.00 +/-0.10 12.00 +/-0.30 4.00 +/-0.10 12.00 +/-0.30 4.00 +/-0.10 P2 40.00 +/-0.10 2.00 +/-0.05 2.00 +/-0.05 40.00 +/-0.10 2.00 +/-0.05 2.00 +/-0.05 40.00 +/-0.20 4.00 +/-0.10 2.00 +/-0.05 40.00 +/-0.20 4.00 +/-0.10 2.00 +/-0.05 40.00 +/-0.20 4.00 +/-0.10 2.00 +/-0.05 40.00 +/-0.20 4.00 +/-0.10 2.00 +/-0.05 40.00 +/-0.20 4.00 +/-0.10 2.00 +/-0.05 40.00 +/-0.20 4.00 +/-0.10 2.00 +/-0.05 40.00 +/-0.20 4.00 +/-0.10 2.00 +/-0.05 40.00 +/-0.20 4.00 +/-0.10 2.00 +/-0.05 40.00 +/-0.20 4.00 +/-0.10 2.00 +/-0.05 40.00 +/-0.20 4.00 +/-0.10 2.00 +/-0.05 40.00 +/-0.20 4.00 +/-0.10 2.00 +/-0.10 40.00 +/-0.20 8.00 +/-0.10 2.00 +/-0.10 40.00 +/-0.20 8.00 +/-0.10 2.00 +/-0.10 D0 1.50 +0.1/-0 1.50 +0.1/-0 1.50 +0.1/-0 1.50 +0.1/-0 1.50 +0.1/-0 1.50 +0.1/-0 1.00 +/-0.10 1.50 +0.1/-0 1.50 +0.1/-0 1.00 +/-0.10 1.50 +0.1/-0 1.00 +/-0.10 1.50 +0.1/-0 1.00 +/-0.10 1.50 +0.1/-0 1.00 +/-0.10 1.50 +0.1/-0 1.00 +/-0.10 1.50 +0.1/-0 1.50 +/-0.10 1.50 +0.1/-0 1.50 +/-0.10 1.50 +0.1/-0 1.50 +/-0.10 1.75 +/-0.10 3.50 +/-0.05 1.75 +/-0.10 3.50 +/-0.05 1.75 +/-0.10 3.50 +/-0.05 1.75 +/-0.10 3.50 +/-0.05 1.75 +/-0.10 3.50 +/-0.05 1.75 +/-0.10 3.50 +/-0.05 1.75 +/-0.10 3.50 +/-0.05 1.75 +/-0.10 5.50 +/-0.10 1.75 +/-0.10 5.50 +/-0.10 1.75 +/-0.10 5.50 +/-0.10 P0 10xP0 P1 D1 - - - - - E 1.75 +/-0.10 3.50 +/-0.05 1.75 +/-0.10 3.50 +/-0.05 1.75 +/-0.10 3.50 +/-0.05 1.75 +/-0.10 3.50 +/-0.05 1.75 +/-0.10 3.50 +/-0.05 F Size Reel size C W1 A N - 0402, 0603, 0805, 1206, 1210 7" 10" 13" 13.0+0.5/-0.2 13.0+0.5/-0.2 13.0+0.5/-0.2 8.4+1.5/-0 8.4+1.5/-0 8.4+1.5/-0 178.01.0 250.01.0 330.01.0 60.0+1.0/-0 100.01.0 1001.0 1808, 1812 7" 13.0+0.5/-0.2 12.4+2.0/-0 178.01.0 60.0+1.0/-0 Fig. 4 The dimension of reel Page 11 of 13 ASC_Middle & High Voltage_003AE Aug. 2018 Multilayer Ceramic Capacitors Approval Sheet Description of customer label a. Customer name b. WTC order series and item number c. Customer P/O d. Customer P/N e. Description of product f. Quantity g. Bar code including quantity & WTC P/N or customer h. WTC P/N i. Shipping date j. Order bar code including series and item numbers k. Serial number of label Constructions No. Name NPO X7R, Y5V 1 Ceramic material CaZrO3 based BaTiO3 based 2 Inner electrode 3 4 Termination 5 Ni Inner layer Cu Middle layer Ni Outer layer Sn Fig. 5 The construction of MLCC Storage and handling conditions (1) To store products at 5 to 40C ambient temperature and 20 to 70%. related humidity conditions. (2) The product is recommended to be used within one year after shipment. Check solderability in case of shelf life extension is needed. Cautions: a. The corrosive gas reacts on the terminal electrodes of capacitors, and results in the poor solderability. Do not store the capacitors in the ambience of corrosive gas (e.g., hydrogen sulfide, sulfur dioxide, chlorine, ammonia gas etc.) b. In corrosive atmosphere, solderability might be degraded, and silver migration might occur to cause low reliability. c. Due to the dewing by rapid humidity change, or the photochemical change of the terminal electrode by direct sunlight,the solderability and electrical performance may deteriorate. Do not store capacitors under direct sunlight or dewing condition. To store products on the shelf and avoid exposure to moisture. Page 12 of 13 ASC_Middle & High Voltage_003AE Aug. 2018 Multilayer Ceramic Capacitors Approval Sheet Recommended soldering conditions The lead-free termination MLCCs are not only to be used on SMT against lead-free solder paste, but also suitable against lead-containing solder paste. If the optimized solder joint is requested, increasing soldering time, temperature and concentration of N2 within oven are recommended. 4 / sec max Over 60sec at least by natural cooling Fig. 6 Recommended reflow soldering profile for SMT process with SnAgCu series solder paste. Page 13 of 13 Fig. 7 Recommended wave soldering profile for SMT process with SnAgCu series solder. ASC_Middle & High Voltage_003AE Aug. 2018