T-1 (3 mm) Diffused LED Lamps HLMP-1301 HLMP-1301-G0000 HLMP-1401 HLMP-1401-E0000 HLMP-1503 HLMP-1503-D0000 HLMP-K40X Series HLMP-K600 Technical Data Features * High Intensity * Choice of 4 Bright Colors High Efficiency Red Orange Yellow High Performance Green * Popular T-1 Diameter Package * Selected Minimum Intensities * Wide Viewing Angle * General Purpose Leads Package Dimensions * Reliable and Rugged * Available on Tape and Reel Description This family of T-1 lamps is widely used in general purpose indicator applications. Diffusants, tints, and optical design are balanced to yield superior light output and wide viewing angles. Several intensity choices are available in each color for increased design flexibility. Part Number HLMP- Application Minimum Intensity (mcd) at 10 mA Color (Material) 1301 1301-G0000 General Purpose Premium Lamp 3.4 8.6 Red (GaAsP on GaP) K400 K401 General Purpose High Ambient 1.3 2.1 Orange (GaAsP on GaP) 1401 1401-E0000 General Purpose Premium Lamp 2.2 5.7 Yellow (GaAsP on GaP) 1503 1503-D0000 General Purpose Premium Lamp 1.0 4.2 Green (GaP) K600[1] General Purpose 1.0 Emerald Green (GaP) Note: 1. Please refer to Application Note 1061 for information comparing standard green and emerald green light output degradation. 2 Absolute Maximum Ratings at TA = 25C Parameter HER/Orange Yellow Green Units Peak Forward Current 90 60 90 mA Average Forward Current[1] 25 20 25 mA DC Current[2] 30 20 30 mA Reverse Voltage (IR = 100 A) 5 5 5 V Transient Forward Current[4] (10 sec Pulse) 500 500 500 mA LED Junction Temperature 110 110 110 C -55 to +100 -55 to +100 -20 to +100 C Operating Temperature Range Storage Temperature Range -55 to +100 Lead Soldering Temperature [1.6 mm (0.063 in.) from body] 260C for 5 seconds Notes: 1. See Figure 5 (HER/Orange), 10 (Yellow), or 15 (Green/Emerald Green) to establish pulsed operating conditions. 2. For Red, Orange, and Green series derate linearly from 50C at 0.5 mA/C. For Yellow series derate linearly from 50C at 0.2 mA/C. 3. For Red, Orange, and Green series derate power linearly from 25C at 1.8 mW/C. For Yellow series derate power linearly from 50C at 1.6 mW/C. 4. The transient peak current is the maximum non-recurring peak current that can be applied to the device without damaging the LED die and wirebond. It is not recommended that the device be operated at peak currents beyond the peak forward current listed in the Absolute Maximum Ratings. Electrical Characteristics at TA = 25 C Symbol IV Device HLMP- Min. Typ. High Efficiency Red 1301 1301-G0000 2.1 8.6 5.5 11.0 Orange K400 K401 1.3 2.1 5.0 5.5 Yellow 1401 1401-E0000 2.2 5.7 6.0 10.0 Green 1503 1585 1.0 4.2 5.0 8.5 Emerald Green K600 1.0 4.5 Description Luminous Intensity Max. Units mcd Test Conditions IF = 10 mA 3 Electrical Characteristics at TA = 25C (cont.) Symbol Device HLMP- Description Min. Typ. Max. Units Test Conditions 21/2 Included Angle Between Half Luminous Intensity Points All 60 Deg. PEAK Peak Wavelength High Efficiency Red Orange Yellow Green Emerald Green 635 600 583 565 558 nm Measurement at Peak d Dominant Wavelength High Efficiency Red Orange Yellow Green Emerald Green 626 602 585 569 560 nm See Note 2 1/2 Spectral Line Halfwidth High Efficiency Red Yellow Green Emerald Green 40 36 28 24 nm s Speed of Response High Efficiency Red Orange Yellow Green Emerald Green 90 280 90 500 3100 ns C Capacitance High Efficiency Red Orange Yellow Green Emerald Green 11 4 15 18 35 pF Thermal Resistance All 290 C/W VF Forward Voltage HER/Orange Yellow Green Emerald Green 1.5 1.5 1.5 VR Reverse Breakdown Voltage All 5.0 V Luminous Efficacy High Efficiency Red Orange Yellow Green Emerald Green RJ-PIN 1.9 2.0 2.1 2.1 145 380 500 595 655 2.4 2.4 2.7 2.7 IF = 10 mA See Note 1 VF = 0; f = 1 MHz Junction to Cathode Lead V IF = 10 mA V IR = 100 A lumens Watt See Note 3 Notes: 1. 1 /2 is the off-axis angle at which the luminous intensity is half the axial luminous intensity. 2. The dominant wavelength, d, is derived from the CIE chromaticity diagram and represents the single wavelength which defines the color of the device. 3. Radiant intensity, Ie, in watts/steradian, may be found from the equation I e= I v/v, where I v is the luminous intensity in candelas and v is the luminous efficacy in lumens/watt. 4 RELATIVE INTENSITY 1.0 ORANGE EMERALD GREEN AlGaAs RED HIGH PERFORMANCE GREEN TA = 25 C HIGH EFFICIENCY RED 0.5 YELLOW 0 500 550 600 650 700 750 WAVELENGTH - nm Figure 1. Relative Intensity vs. Wavelength. T-1 High Efficiency Red, Orange Diffused Lamps Figure 2. Forward Current vs. Forward Voltage Characteristics. Figure 3. Relative Luminous Intensity vs. DC Forward Current. Figure 4. Relative Efficiency (Luminous Intensity per Unit Current) vs. Peak LED Current. Figure 5. Maximum Tolerable Peak Current vs. Pulse Duration. (IDC MAX as per MAX Ratings). Figure 6. Relative Luminous Intensity vs. Angular Displacement. 5 T-1 Yellow Diffused Lamps Figure 7. Forward Current vs. Forward Voltage Characteristics. Figure 8. Relative Luminous Intensity vs. Forward Current. Figure 9. Relative Efficiency (Luminous Intensity per Unit Current) vs. Peak Current. Figure 10. Maximum Tolerable Peak Current vs. Pulse Duration. (IDC MAX as per MAX Ratings). Figure 11. Relative Luminous Intensity vs. Angular Displacement. 6 T-1 Green/Emerald Green Diffused Lamps Figure 12. Forward Current vs. Forward Voltage Characteristics. Figure 13. Relative Luminous Intensity vs. Forward Current. Figure 14. Relative Efficiency (Luminous Intensity per Unit Current) vs. Peak LED Current. Figure 15. Maximum Tolerable Peak Current vs. Pulse Duration. (IDC MAX as per MAX Ratings). Figure 16. Relative Luminous Intensity vs. Angular Displacement. www.semiconductor.agilent.com Data subject to change. Copyright (c) 1999 Agilent Technologies, Inc. November 30, 1999 Obsoletes 5964-9374E (1/99) 5968-5911E Tape and Reel Options for T-13/4 (5 mm), T-1 (3 mm), LED Lamps Technical Data Option 01 Option 02 Features Ordering Information * Compatible with Radial Lead Automatic Insertion Equipment * Meets Dimensional Specifications of IEC Publication 286 and ANSI/EIA Standard RS-468 for Tape and Reel * Reel Packaging Simplifies Handling and Testing * T-1 and T-1 3/4 LED Lamps Available Packaged on Tape and Reel * 5 mm (0.197 inch) Formed Lead and 2.54 mm (0.100 inch) Straight Lead Spacing Available To order LED lamps packaged on tape and reel, include the appropriate option code along with the device catalog part number. Example: to order the HLMP-3300 on tape and reel with formed leads (5 mm lead spacing) order as follows: HLMP-3300 Option 01. Minimum order quantities vary by part number. Orders must be placed in reel increments. Please contact your local Agilent sales office or franchised Agilent distributor for a complete list of lamps available on tape and reel. Description LED lamps with 0.46 mm (0.018 inch) square leads with 5 mm (0.197 inch) lead spacing are recommended for use with automatic insertion equipment. T-1 and T-13/4 LED lamps are available on tape and reel as specified by the IEC Publication 286 and ANSI/EIA Standard RS-468. The Option 01 lamp devices have formed leads with 5 mm (0.197 inch) spacing for automatic insertion into PC boards by radial lead insertion equipment. The Option 02 lamp devices have straight leads with 2.54 mm (0.100 inch) spacing, packaged on tape and reel for ease of handling. T-1 lamps are packaged 1800/reel. T-13/4 lamps are packaged 1300/reel. Caution: Agilent does not recommend T-1 package, option 02 LEDs for auto-insertion. The force exerted on the LED lead frame during the cut and clinch operation of auto-insertion may result in cracking of the lamp epoxy dome which results in catastrophic failure. It is suggested that insertion machine compatibility be confirmed. Device Selection Guide Option Description 01 Tape and reel, 5 mm (0.197 inch) formed leads. 02 Tape and reel, 2.54 mm (0.100 inch) straight leads. Package Quantity/Reel Order Increments T-1 1800 1800 T-13/4 1300 1300 2 Absolute Maximum Ratings and Electrical/ Optical Characteristics The absolute maximum ratings, mechanical dimension tolerances and electrical/optical characteristics for lamps packaged on tape and reel are identical to the basic catalog device. Refer to the basic data sheet for the specified values. Notes: 1. Minimum leader length at either end of tape is 3 blank part spaces. 2. Silver saver paper is used as the interlayer for silver plated lead devices. 3. The maximum number of consecutive missing lamps is 3. 4. In accordance with EIA and IEC specs, the anode lead leaves the reel first. 5. Drawings apply to devices with 0.46 mm (0.018 inch) square leads only. Contact Agilent Sales Office for dimensions of 0.635 mm (0.025 inch) square lead devices. Tape and Reel LED Configurations Figure 1. T-1 High Profile Lamps, Option 01. Figure 2. T-1 High Profile Lamps, Option 02. Figure 3. T-1 Low Profile Lamps, Option 01. Figure 4. T-1 Low Profile Lamps, Option 02. 3 Tape and Reel LED Configurations (cont.) Figure 5. T-13/ 4 High Profile Lamps, Option 01. Figure 6. T-13/ 4 High Profile Lamps, Option 02. Figure 7. T-13/ 4 Low Profile Lamps, Option 01. Figure 8. T-13/ 4 Low Profile Lamps, Option 02. 4 Dimensional Specifications for Tape and Reel Item Option 01 02 Symbol Specification Notes T1 High Profile Body Height A1 4.70 (0.185) 4.19 (0.165) Body Diameter D1 3.18 (0.125) 2.67 (0.105) Component Height H1 25.7 (1.012) Max. Tl Low Profile Body Height A2 3.73 (0.147) 3.23 (0.127) Body Diameter D2 3.05 (0.120) 2.79 (0.110) Component Height H2 24.7 (0.974) Max. T13 /4 High Profile Body Height A3 9.19 (0.362) 8.43 (0.332) Body Diameter D3 5.08 (0.200) 4.32 (0.170) Component Height H3 30.2 (1.189) Max. T13 /4 Low Profile Body Height A4 6.35 (0.250) 5.33 (0.210) Body Diameter D4 5.08 (0.200) 4.32 (0.170) Component Height H4 27.4 (1.079) Max. Lead Wire Thickness d 0.45 (0.018) Pitch of Component P 13.7 (0.539) 11.7 (0.461) Feed Hole Pitch P0 12.9 (0.508) 12.5 (0.492) Cumulative error: 1.0 mm/20 pitches Feed Hole Center to Lead Center P1 4.55 (0.179) 3.15 (0.124) Measure at crimp bottom 5.78/3.68 (0.227/0.1448) for straight leads Hole Center to Component Center P2 7.35 (0.289) 5.35 (0.211) Lead to Lead Distance F 5.40 (0.213) 4.90 (0.193) Component Alignment, Front-rear h 0 1.0 (0.039) Tape Width W 18.5 (0.728) 17.5 (0.689) Hold Down Tape Width W0 15.3 (0.602) 12.0 (0.472) Hole Position W1 9.75 (0.384) 8.50 (0.335) Square Leads 2.54 (0.100) nominal for straight leads Figure 9 5 Dimensional Specifications for Tape and Reel (cont.) Item Option 01 02 Symbol Specification W2 2.54 (0.100) Max. Height of Component from Hole Center H 21.0 (0.827) 20.0 (0.787) Lead Clinch Height HO 16.5 (0.650) 15.5 (0.610) Feed Hole Diameter DO 4.20 (0.165) 3.80 (0.150) Total Tape Thickness t 0.90 (0.035) 0.50 (0.020) Length of Snipped Lead L 11.0 (0.433) Max. Lead Length Under Hold Down Tape I1 14.5 (0.571) Min. Hold Down Tape Position Note: 1. Dimensions in millimetres (inches) maximum/minimum. Figure 9. Front to Rear Alignment and Tape Thickness, Typical All Device Types. Figure 10. Device Retention Tests and Specifications. Figure 11. Reel Configuration and Labeling. Notes Paper thickness: 0.55 (0.022) 0.45 (0.018) Figure 9 www.semiconductor.agilent.com Data subject to change. Copyright (c) 1999 Agilent Technologies, Inc. Obsoletes 5964-9375E (4/96) 5968-4164E (11/99) T-1 (3 mm) Right Angle LED Indicators Technical Data Option A1 Option A2 Features * Ideal for Card Edge Status Indication * Package Design Allows Flush Seating on a PC Board * May be Side Stacked on 4.57 mm (0.18") Centers * Up to 8 Units May be Coupled for a Horizontal Array Configuration with a Common Coupling Bar (See T-1 Right Angle Array Data Sheet) * LEDs Available in All LED Colors, With or Without Integrated Current Limiting Resistor in T-1 Packages * Easy Flux Removal Design * Housing Material Meets UL 94V-0 Rating * Additional Catalog Lamps Available as Options Description Agilent T-1 Right Angle Indicators are industry standard status indicators that incorporate a T-1 LED lamp in a black plastic right angle mount housing. The indicators are available in Standard Red, High Efficiency Red, Orange, Yellow, and High Performance Green, with or without an integrated current limiting resistor. These products are designed to be used as back panel diagnostic indicators and card edge logic status indicators. Ordering Information To order other T-1 High Dome Lamps in Right Angle Housings in addition to the parts indicated above, select the base part Package Dimensions 2.41 (0.095) REF. 6.43 (0.253) 6.27 (0.247) 4.65 (0.183) MAX. 3.68 (0.145) DIA. 3.18 (0.125) 5.21 (0.206) 4.95 (0.195) 7.44 (0.293) 7.29 (0.287) CATHODE OPTION NO. CATHODE LEAD LENGTH A1 16.0 (0.630) MIN. A2 3.43 (0.135) MIN. SEE TABLE 1.27 (0.060) NOM. 2.54 (0.100) NOM. 4.70 (0.185) REF. 0.46 (0.018) SQUARE NOM. ANODE LEAD LENGTH UNSHEARED 1.27 (0.050) NOM. LONGER UNEVEN LEADS THAN CATHODE 3.43 (0.135) MIN. SHEARED UNEVEN LEADS NOTE: ALL DIMENSIONS ARE IN MILLIMETERS (INCHES). number and add the option code A1 or A2, depending on the lead length desired. For example, by ordering HLMP-1302 Option A1, you would receive the long lead option. By ordering HLMP-1302 Option A2, you would receive the short lead option. Arrays made by connecting two to eight single Right Angle Indicators with a Common Coupling Bar are available. Ordering information for arrays may be found on the T-1 Right Angle Array data sheet. Absolute Maximum Ratings and Other Electrical/Optical Characteristics The absolute maximum ratings and typical device characteristics are identical to those of the T-1 LED lamps. For information about these characteristics, see the data sheets of the equivalent T-1 LED lamp. www.semiconductor.agilent.com Data subject to change. Copyright (c) 1999 Agilent Technologies, Inc. Obsoletes 5965-9699E (5/97) 5968-4124E (11/99)