MQDC-430 - BANNER ENGINEERING

QMT42 Series Long-Range Diffuse Sensors

Adjustable Sensing Distance of up to 6 m (20')

Printed in USA P/N 57890

Features

• Powerful, collimated infrared light source and special lensing allows reliable

long-range detection of even the darkest objects

• Compact, rugged, low cost self-contained sensors in metal die cast housings

• Leakproof IP67 (NEMA 6) construction for reliable sensing in harsh environments

• Outstanding electrical noise immunity

• Dual LED system indicates sensor performance

• Choice of integral cable or quick disconnect connector

Infrared, 880 nm

QMT42VN6DX

QMT42VN6DXQ 10 mm

(0.4")

6 m

(20')

2 m (6.5')

4-pin Euro QD

10-30V dc

NPN

100

0.1 m

0.33 ft 1.0 m

3.3 ft 10 m

33 ft

0.01 m

0.033 ft

1000

DISTANCE

QMT42DX

Diffuse Mode

Models Range Cable Supply

Voltage Output

Type Excess Gain

QMT42VP6DX

QMT42VP6DXQ 2 m (6.5')

4-pin Euro QD PNP

QMT42 Long-Range Diffuse Mode

WARNING . . . Not To Be Used for Personnel Protection

Never use these products as sensing devices for personnel protection. Doing so could lead to serious injury or death.

These sensors do NOT include the self-checking redundant circuitry necessary to allow their use in personnel safety

applications. A sensor failure or malfunction can cause either an energized or de-energized sensor output condition. Consult your current

Banner Safety Products catalog for safety products which meet OSHA, ANSI and IEC standards for personnel protection.

7.5 m

25 ft

6.0 m

20 ft

4.5 m

15 ft

3.0 m

10 ft

1.5 m

5 ft

10 mm

20 mm

30 mm

10 mm

20 mm

30 mm

0.4 in

0.8 in

1.2 in

0.4 in

0.8 in

1.2 in

DISTANCE

Diffuse Mode

QMT42DX

Beam Pattern

Performance based on 90% reflectance white test card

QMT42 Series Long-Range Diffuse Sensors

page 2

18.0 mm

(0.71")

ø 3.2 mm

(0.125")

(4 Holes) 58.0 mm

(2.28")

Green LED Power/Overload Indicator

Yellow LED

Output/Marginal Indicator

10.0 mm

(0.39")

12.3 mm

(0.48")

Threaded M4 x 0.7

Mounting Holes

23.9 mm (2)

(0.94")

2 x 3.1mm

(0.12")

19.2 mm

(0.76")

2 x 3.1mm

(0.12")

27.1 mm (2)

(1.07")

42.0 mm

(1.65")

Cabled models

Sensing Beam

Adjustments 4-turn slotted Gain (sensitivity) adjustment potentiometer (clutched at both ends of travel)

Supply Protection Circuitry Protected against reverse polarity and transient voltages

Output Configuration SPDT (complementary) solid-state dc switch; Choose NPN (current sinking) or PNP (current sourcing) models.

Light operate:

N.O. output conducts when the sensor sees its own modulated light

Dark operate:

N.C. output conducts when the sensor sees dark

Output Rating 100 mA maximum (each output)

Off-state leakage current: <5 microamps at 30V dc;

On-state saturation voltage: <1V at 10 mA dc; <1.5V at 100 mA dc

Output Protection Circuitry Protected against false pulse on power-up and continuous overload or short-circuit of outputs

Overload trip point ≥130mA, typical, at 20ºC

Output Response Time 1 millisecond on and off

NOTE: 100 millisecond delay on power-up; outputs are non-conducting during this time

Indicators Two LEDs: Green and Yellow

GREEN glowing steadily = power to sensor is ON

GREEN flashing = output is overloaded

YELLOW glowing steadily = light is sensed; normally open output ON

YELLOW flashing = marginal excess gain (1-1.5x) in light condition

Repeatability of Response 250 microseconds

Certifications Approvals in process

Construction Housings are die-cast zinc alloy with black acrylic polyurethane finish; lenses are acrylic

Environmental Rating IP67; NEMA 6

Connections 2 m (6.5') or 9 m (30') attached cable, or 4-pin Euro-style quick-disconnect fitting; Cables for QD models

are purchased separately

Operating Temperature -20º to +55ºC (-4º to +131ºF); Maximum relative humidity 90% at 50ºC (non-condensing)

Sensing Hysteresis Less than 20% of set sensing distance

Infrared, 880 nm

Supply Voltage and Current 10 to 30V dc (10% maximum ripple) at less than 40 milliamps

QMT42DX Specifications

QMT42DX Dimensions

M12 x 1 x 18 mm

Euro-style 76.2 mm

(3.00")

Quick-Disconnect models

page 3

QMT42 Series Long-Range Diffuse Sensors

Sensors with NPN (Sinking) Outputs Sensors with PNP (Sourcing) Outputs

Cabled Models Cabled Models

Quick Disconnect Models Quick Disconnect Models

bn -

wh Load

Load

10-30V dc

bu -

wh Load

Load

10-30V dc

bn -

wh Load

Load

10-30V dc

bu -

10-30V dc

Load

QMT42DX Hookups

Quick-Disconnect (QD) Cables

M12 x 1

ø15 mm

(0.6")

44 mm max.

(1.7")

The following is the selection of cables available for the QMT42 QD models

DimensionsStyle Model Length For use with

4-pin

Euro-Style

straight

MQDC-406

MQDC-415

MQDC-430

2 m (6.5')

5 m (15')

9 m (30')

All QMT42 sensors with

quick-disconnect fitting

Pin #2

White Wire

Pin #3

Blue Wire

Pin #4

Black Wire

Pin #1

Brown Wire

Pinout

38 mm max.

(1.5")

M12 x 1

ø15 mm

(0.6")

38 mm max.

(1.5")

4-pin

Euro-Style

right-angle

MQDC-406RA

MQDC-415RA

MQDC-430RA

2 m (6.5')

5 m (15')

9 m (30')

Banner Engineering Corp., 9714 Tenth Ave. No., Minneapolis, MN 55441 • Phone: 612.544.3164 • Fax: 612.544.3573 • E-mail: sensors@baneng.com

QMT42 Series Long-Range Diffuse Sensors

SMB42L SMB42U

2.3 mm

(0.09")

12.7 mm

(0.50")

23.3 mm

(0.92")

6.4 mm

(0.25")

3x 10.0 mm

(0.40")

25.4 mm

(1.00")

33.0 mm

(1.30")

5.0 mm

(0.20")

4x M4 x 0.7

2x M3 x 0.5

40.0 mm

(1.58")

9.6 mm

(0.38")

3.0 mm

(0.12")

38.9 mm

(1.53")

30.0 mm

(1.18")

25.4 mm

(1.00")

3.1 mm

(0.12")

9.6 mm

(0.38")

2x 8.9 mm

(0.35")

4x M3 x 0.5

12.7 mm

(0.50")

6.5 mm

(0.25")

2x M4 x 0.7

12.7 mm

(0.50")

23.3 mm

(0.92") 2.3 mm

(0.09")

25.4 mm

(1.00") 3.1 mm

(0.12")

• 13 gauge

• Stainless steel

SMB42T • Right-angle

• Stainless steel

• 13 gauge

• Stainless steel

SMB42F • 13 gauge

• Stainless steel

R 5.1 mm

(0.20")

ø 3.05 mm

(0.120")

ø 3.05 mm Slot

(0.120")

20°

90°

15°

(2)

R 24.1 mm

(0.95")

31.8 mm

(1.25")

20.1 mm

(0.79")

45.5 mm

(1.79")

20.3 mm

(0.80")

R 3.1 mm

(0.12") (2)

10° (TYP)

4.32 mm

(0.170")

Slot (2)

2.5 mm

(0.10")

10.0 mm

(0.40")

5.0 mm

(0.20")

12.7 mm

(0.50")

25.4 mm

(1.00")

20.0 mm

(0.79")

4x M3 x 0.5

2x M4 x 0.7

12.7 mm

(0.50")

9.6 mm

(0.38")

6.4 mm

(0.25")

25.4 mm

(1.00")

23.3 mm

(0.92")

28.3 mm

(1.12") 2.3 mm

(0.09")

37.1 mm

(1.46") 48.4 mm

(1.91")

SMB30SK

WARRANTY: Banner Engineering Corporation warrants its

products to be free from defects for one year. Banner Engineering

Corporation will repair or replace, free of charge, any product of its

manufacture found to be defective at the time it is returned to the

factory during the warranty period. This warranty does not cover

damage or liability for the improper application of Banner products.

This warranty is in lieu of any other warranty either expressed or

implied.

78.0 mm

(3.07")

2 x Hole for

#6 Machine Screw

50.8 mm

(2.00")

56.7 mm

(2.31")

Assembled

29.0 mm

(1.14")

68.0 mm

(2.68")

66.5 mm

(2.62")

• 13 gauge

• Stainless steel and PBT polyester

QMT42 Mounting Brackets