BF1118; BF1118R; BF1118W; BF1118WR Silicon RF switches Rev. 3 -- 14 November 2014 Product data sheet 1. Product profile 1.1 General description These switches are a combination of a depletion type Field-Effect Transistor (FET) and a band-switching diode. The BF1118, BF1118R, BF1118W and BF1118WR are encapsulated in the SOT143B, SOT143R, SOT343N and SOT343R respectively. The low loss and high isolation capabilities of these devices provide excellent RF switching functions. The gate of the MOSFET can be isolated from ground with the diode, resulting in low losses. Integrated diodes between gate and source and between gate and drain protect against excessive input voltage surges. 1.2 Features and benefits Specially designed for low loss RF switching up to 1 GHz 1.3 Applications Various RF switching applications such as: Passive loop through for VCR tuner Transceiver switching 1.4 Quick reference data Table 1. Quick reference data Symbol Parameter Conditions Lins(on) on-state insertion loss RS = RL = 50 ; f 1 GHz; VSK = VDK = 0 V; IF = 0 mA ISLoff off-state isolation RDSon VGS(p) [1] Min Typ Max Unit - - 2.5 dB RS = RL = 50 ; f 1 GHz; VSK = VDK = 3.3 V; IF = 1 mA 30 - - dB drain-source on-state resistance VKS = 0 V; ID = 1 mA - 15 23.3 gate-source pinch-off voltage VDS = 1 V; ID = 20 A - 2 2.44 V IF = diode forward current. [1] BF1118(R); BF1118W(R) NXP Semiconductors Silicon RF switches 2. Pinning information Table 2. Pin Pinning Description Simplified outline Graphic symbol BF1118 (SOT143B) 1 FET gate; diode anode 2 diode cathode 3 source [1] 4 drain [1] DDL BF1118R (SOT143R) 1 FET gate; diode anode 2 diode cathode 3 source [1] 4 drain [1] DDL BF1118W (SOT343N) 1 FET gate; diode anode 2 diode cathode 3 source [1] 4 drain [1] DDL BF1118WR (SOT343R) 1 FET gate; diode anode 2 diode cathode 3 source [1] 4 drain [1] [1] DDL Drain and source are interchangeable. 3. Ordering information Table 3. Ordering information Type number Package Name Description Version BF1118 - plastic surface-mounted package; 4 leads SOT143B BF1118R - plastic surface-mounted package; reverse pinning; 4 leads SOT143R BF1118W - plastic surface-mounted package; 4 leads SOT343N BF1118WR - plastic surface-mounted package; reverse pinning; 4 leads SOT343R BF1118_1118R_1118W_1118WR All information provided in this document is subject to legal disclaimers. Product data sheet Rev. 3 -- 14 November 2014 (c) NXP Semiconductors N.V. 2014. All rights reserved. 2 of 13 BF1118(R); BF1118W(R) NXP Semiconductors Silicon RF switches 4. Marking Table 4. Marking Type number Marking code BF1118 VC% BF1118R VD% BF1118W VB BF1118WR VC 5. Limiting values Table 5. Limiting values In accordance with the Absolute Maximum Rating System (IEC 60134). Symbol Parameter Conditions Min Max Unit FET VDS drain-source voltage - 3 V VSD source-drain voltage - 3 V VDG drain-gate voltage - 7 V VSG source-gate voltage - 7 V ID drain current - 10 mA VR reverse voltage - 35 V IF forward current - 100 mA Diode FET and diode Tstg storage temperature 65 +150 C Tj junction temperature - 150 C 6. Thermal characteristics Table 6. Thermal characteristics Symbol Parameter Rth(j-sp) thermal resistance from junction to solder point [1] Conditions [1] Typ Unit 250 K/W Soldering point of FET gate and diode anode lead. BF1118_1118R_1118W_1118WR All information provided in this document is subject to legal disclaimers. Product data sheet Rev. 3 -- 14 November 2014 (c) NXP Semiconductors N.V. 2014. All rights reserved. 3 of 13 BF1118(R); BF1118W(R) NXP Semiconductors Silicon RF switches 7. Static characteristics Table 7. Static characteristics Tj = 25 C unless otherwise specified. Symbol Parameter Conditions Min Typ Max Unit V(BR)GSS gate-source breakdown voltage VDS = 0 V; IGS = 0.1 mA - - 7 V VGS(p) gate-source pinch-off voltage VDS = 1 V; ID = 20 A - 2 2.44 V IDSX drain cut-off current VGS = 3.3 V; VDS = 1 V - - 16 A IGSS gate leakage current VGS = 3.3 V; VDS = 0 V - - 100 nA RDSon drain-source on-state resistance VGS = 0 V; ID = 1 mA - 15 23.3 VF forward voltage IF = 10 mA - - 1 V IR reverse current VR = 25 V - - 50 nA VR = 20 V; Tamb = 75 C - - 1 A FET Diode 8. Dynamic characteristics Table 8. Dynamic characteristics Common cathode; Tamb = 25 C. Symbol Parameter Conditions Min Typ Max Unit FET and diode Lins(on) ISLoff RDSon on-state insertion loss off-state isolation [1] RS = RL = 50 ; f 1 GHz - - 2.5 dB RS = RL = 50 ; f = 1 GHz - 1.5 - dB RS = RL = 75 ; f 1 GHz - - 2.5 dB VSK = VDK = 3.3 V; IF = 1 mA drain-source on-state resistance input capacitance Ci VSK = VDK = 0 V; IF = 0 mA RS = RL = 50 ; f 1 GHz 30 - - dB RS = RL = 50 ; f = 1 GHz - 35 - dB RS = RL = 75 ; f 1 GHz 30 - - dB - 15 23.3 - 1 - pF - 0.65 0.9 pF VKS = 0 V; ID = 1 mA f = 1 MHz [2] VSK = VDK = 3.3 V; IF = 1 mA VSK = VDK = 0 V; IF = 0 mA output capacitance Co f = 1 MHz [2] VSK = VDK = 3.3 V; IF = 1 mA - 1 - pF VSK = VDK = 0 V; IF = 0 mA - 0.65 0.9 pF - 1.1 - pF - - 0.9 Diode Cd rD diode capacitance diode forward resistance f = 1 MHz; VR = 0 V IF = 2 mA; f = 100 MHz [1] IF = diode forward current. [2] Ci is the series connection of CGS and CGK; Co is the series connection of CGD and CGK. [3] Guaranteed on AQL basis; inspection level S4, AQL 1.0. BF1118_1118R_1118W_1118WR All information provided in this document is subject to legal disclaimers. Product data sheet Rev. 3 -- 14 November 2014 [3] (c) NXP Semiconductors N.V. 2014. All rights reserved. 4 of 13 BF1118(R); BF1118W(R) NXP Semiconductors Silicon RF switches DDO DDO /LQV RQ G% ,6/RII G% Fig 1. I 0+] I 0+] VSK = VDK = 0 V; RS = RL = 50 ; IF = 0 mA (diode forward current). VSK = VDK = 3.3 V; RS = RL = 50 ; IF = 1 mA (diode forward current). Measured in test circuit; see Figure 3. Measured in test circuit; see Figure 3. On-state insertion loss as a function of frequency; typical values Fig 2. Off-state isolation as a function of frequency; typical values 9 Q) N %)%)5 %):%)5: LQSXW N Q) Q) RXWSXW N N Q) 9 DDO On-state: V = 0 V. Off-state: V = 3.3 V. Fig 3. Test circuit BF1118_1118R_1118W_1118WR All information provided in this document is subject to legal disclaimers. Product data sheet Rev. 3 -- 14 November 2014 (c) NXP Semiconductors N.V. 2014. All rights reserved. 5 of 13 BF1118(R); BF1118W(R) NXP Semiconductors Silicon RF switches 9. Package outline 3ODVWLFVXUIDFHPRXQWHGSDFNDJHOHDGV 627% ' % ( $ ; \ +( Y 0 $ H ES Z 0 % 4 $ $ F /S E H GHWDLO; PP VFDOH ',0(16,216 PPDUHWKHRULJLQDOGLPHQVLRQV 81,7 $ PP 287/,1( 9(56,21 $ PD[ ES E F ' ( H H +( /S 4 Y Z \ 5()(5(1&(6 ,(& -('(& -(,7$ ,668('$7( 627% Fig 4. (8523($1 352-(&7,21 Package outline SOT143B BF1118_1118R_1118W_1118WR All information provided in this document is subject to legal disclaimers. Product data sheet Rev. 3 -- 14 November 2014 (c) NXP Semiconductors N.V. 2014. All rights reserved. 6 of 13 BF1118(R); BF1118W(R) NXP Semiconductors Silicon RF switches 3ODVWLFVXUIDFHPRXQWHGSDFNDJHUHYHUVHSLQQLQJOHDGV ' 6275 % ( $ ; \ +( Y 0 $ H ES Z 0 % 4 $ $ F /S E H GHWDLO; PP VFDOH ',0(16,216 PPDUHWKHRULJLQDOGLPHQVLRQV 81,7 $ $ PD[ ES E F ' ( H H +( /S 4 Y Z \ PP 287/,1( 9(56,21 5()(5(1&(6 ,(& 6275 Fig 5. -('(& -(,7$ 6&$$ (8523($1 352-(&7,21 ,668('$7( Package outline SOT143R BF1118_1118R_1118W_1118WR All information provided in this document is subject to legal disclaimers. Product data sheet Rev. 3 -- 14 November 2014 (c) NXP Semiconductors N.V. 2014. All rights reserved. 7 of 13 BF1118(R); BF1118W(R) NXP Semiconductors Silicon RF switches 3ODVWLFVXUIDFHPRXQWHGSDFNDJHOHDGV 6271 ' % $ ( ; +( \ Y 0 $ H 4 $ $ F E ES Z 0 % /S H GHWDLO; PP VFDOH ',0(16,216 PPDUHWKHRULJLQDOGLPHQVLRQV $ $ 81,7 ES E F PD[ PP 287/,1( 9(56,21 ( H H +( /S 4 Y Z \ 5()(5(1&(6 ,(& 6271 Fig 6. ' -('(& (,$ (8523($1 352-(&7,21 ,668('$7( Package outline SOT343N BF1118_1118R_1118W_1118WR All information provided in this document is subject to legal disclaimers. Product data sheet Rev. 3 -- 14 November 2014 (c) NXP Semiconductors N.V. 2014. All rights reserved. 8 of 13 BF1118(R); BF1118W(R) NXP Semiconductors Silicon RF switches 3ODVWLFVXUIDFHPRXQWHGSDFNDJHUHYHUVHSLQQLQJOHDGV ' 6275 % $ ( ; +( \ Y 0 $ H 4 $ $ F Z 0 % ES /S E H GHWDLO; PP VFDOH ',0(16,216 PPDUHWKHRULJLQDOGLPHQVLRQV 81,7 $ $ PD[ ES E F ' ( H H +( /S 4 Y Z \ PP 287/,1( 9(56,21 5()(5(1&(6 ,(& 6275 Fig 7. -('(& (,$ (8523($1 352-(&7,21 ,668('$7( Package outline SOT343R BF1118_1118R_1118W_1118WR All information provided in this document is subject to legal disclaimers. Product data sheet Rev. 3 -- 14 November 2014 (c) NXP Semiconductors N.V. 2014. All rights reserved. 9 of 13 BF1118(R); BF1118W(R) NXP Semiconductors Silicon RF switches 10. Handling information CAUTION This device is sensitive to ElectroStatic Discharge (ESD). Observe precautions for handling electrostatic sensitive devices. Such precautions are described in the ANSI/ESD S20.20, IEC/ST 61340-5, JESD625-A or equivalent standards. 11. Abbreviations Table 9. Abbreviations Acronym Description AQL Acceptable Quality Level MOSFET Metal-Oxide Semiconductor Field-Effect Transistor RF Radio Frequency S4 Special inspection level 4 VCR Video Cassette Recorder 12. Revision history Table 10. Revision history Document ID Release date Data sheet status Change notice Supersedes BF1118_1118R_1118W_1118WR v.3 20141114 Product data sheet - BF1118_1118R_1118W_ 1118WR v.2 Modifications: * Section 10 on page 10: The information has been moved from Section 1.1 to this section. * Table 7 on page 4: The minimum value for V(BR)GSS has been removed and a maximum value has been set instead. BF1118_1118R_1118W_1118WR v.2 20120111 Product data sheet - BF1118_1118R_1118W_ 1118WR v.1 BF1118_1118R_1118W_1118WR v.1 20100629 Product data sheet - - BF1118_1118R_1118W_1118WR All information provided in this document is subject to legal disclaimers. Product data sheet Rev. 3 -- 14 November 2014 (c) NXP Semiconductors N.V. 2014. All rights reserved. 10 of 13 BF1118(R); BF1118W(R) NXP Semiconductors Silicon RF switches 13. Legal information 13.1 Data sheet status Document status[1][2] Product status[3] Definition Objective [short] data sheet Development This document contains data from the objective specification for product development. Preliminary [short] data sheet Qualification This document contains data from the preliminary specification. Product [short] data sheet Production This document contains the product specification. [1] Please consult the most recently issued document before initiating or completing a design. [2] The term `short data sheet' is explained in section "Definitions". [3] The product status of device(s) described in this document may have changed since this document was published and may differ in case of multiple devices. The latest product status information is available on the Internet at URL http://www.nxp.com. 13.2 Definitions Draft -- The document is a draft version only. The content is still under internal review and subject to formal approval, which may result in modifications or additions. NXP Semiconductors does not give any representations or warranties as to the accuracy or completeness of information included herein and shall have no liability for the consequences of use of such information. Short data sheet -- A short data sheet is an extract from a full data sheet with the same product type number(s) and title. A short data sheet is intended for quick reference only and should not be relied upon to contain detailed and full information. For detailed and full information see the relevant full data sheet, which is available on request via the local NXP Semiconductors sales office. In case of any inconsistency or conflict with the short data sheet, the full data sheet shall prevail. Product specification -- The information and data provided in a Product data sheet shall define the specification of the product as agreed between NXP Semiconductors and its customer, unless NXP Semiconductors and customer have explicitly agreed otherwise in writing. In no event however, shall an agreement be valid in which the NXP Semiconductors product is deemed to offer functions and qualities beyond those described in the Product data sheet. 13.3 Disclaimers Limited warranty and liability -- Information in this document is believed to be accurate and reliable. However, NXP Semiconductors does not give any representations or warranties, expressed or implied, as to the accuracy or completeness of such information and shall have no liability for the consequences of use of such information. NXP Semiconductors takes no responsibility for the content in this document if provided by an information source outside of NXP Semiconductors. In no event shall NXP Semiconductors be liable for any indirect, incidental, punitive, special or consequential damages (including - without limitation - lost profits, lost savings, business interruption, costs related to the removal or replacement of any products or rework charges) whether or not such damages are based on tort (including negligence), warranty, breach of contract or any other legal theory. Notwithstanding any damages that customer might incur for any reason whatsoever, NXP Semiconductors' aggregate and cumulative liability towards customer for the products described herein shall be limited in accordance with the Terms and conditions of commercial sale of NXP Semiconductors. Right to make changes -- NXP Semiconductors reserves the right to make changes to information published in this document, including without limitation specifications and product descriptions, at any time and without notice. This document supersedes and replaces all information supplied prior to the publication hereof. Suitability for use -- NXP Semiconductors products are not designed, authorized or warranted to be suitable for use in life support, life-critical or safety-critical systems or equipment, nor in applications where failure or malfunction of an NXP Semiconductors product can reasonably be expected to result in personal injury, death or severe property or environmental damage. NXP Semiconductors and its suppliers accept no liability for inclusion and/or use of NXP Semiconductors products in such equipment or applications and therefore such inclusion and/or use is at the customer's own risk. Applications -- Applications that are described herein for any of these products are for illustrative purposes only. NXP Semiconductors makes no representation or warranty that such applications will be suitable for the specified use without further testing or modification. Customers are responsible for the design and operation of their applications and products using NXP Semiconductors products, and NXP Semiconductors accepts no liability for any assistance with applications or customer product design. It is customer's sole responsibility to determine whether the NXP Semiconductors product is suitable and fit for the customer's applications and products planned, as well as for the planned application and use of customer's third party customer(s). Customers should provide appropriate design and operating safeguards to minimize the risks associated with their applications and products. NXP Semiconductors does not accept any liability related to any default, damage, costs or problem which is based on any weakness or default in the customer's applications or products, or the application or use by customer's third party customer(s). Customer is responsible for doing all necessary testing for the customer's applications and products using NXP Semiconductors products in order to avoid a default of the applications and the products or of the application or use by customer's third party customer(s). NXP does not accept any liability in this respect. Limiting values -- Stress above one or more limiting values (as defined in the Absolute Maximum Ratings System of IEC 60134) will cause permanent damage to the device. Limiting values are stress ratings only and (proper) operation of the device at these or any other conditions above those given in the Recommended operating conditions section (if present) or the Characteristics sections of this document is not warranted. Constant or repeated exposure to limiting values will permanently and irreversibly affect the quality and reliability of the device. Terms and conditions of commercial sale -- NXP Semiconductors products are sold subject to the general terms and conditions of commercial sale, as published at http://www.nxp.com/profile/terms, unless otherwise agreed in a valid written individual agreement. In case an individual agreement is concluded only the terms and conditions of the respective agreement shall apply. NXP Semiconductors hereby expressly objects to applying the customer's general terms and conditions with regard to the purchase of NXP Semiconductors products by customer. No offer to sell or license -- Nothing in this document may be interpreted or construed as an offer to sell products that is open for acceptance or the grant, conveyance or implication of any license under any copyrights, patents or other industrial or intellectual property rights. BF1118_1118R_1118W_1118WR All information provided in this document is subject to legal disclaimers. Product data sheet Rev. 3 -- 14 November 2014 (c) NXP Semiconductors N.V. 2014. All rights reserved. 11 of 13 BF1118(R); BF1118W(R) NXP Semiconductors Silicon RF switches Export control -- This document as well as the item(s) described herein may be subject to export control regulations. Export might require a prior authorization from competent authorities. Quick reference data -- The Quick reference data is an extract of the product data given in the Limiting values and Characteristics sections of this document, and as such is not complete, exhaustive or legally binding. Non-automotive qualified products -- Unless this data sheet expressly states that this specific NXP Semiconductors product is automotive qualified, the product is not suitable for automotive use. It is neither qualified nor tested in accordance with automotive testing or application requirements. NXP Semiconductors accepts no liability for inclusion and/or use of non-automotive qualified products in automotive equipment or applications. In the event that customer uses the product for design-in and use in automotive applications to automotive specifications and standards, customer (a) shall use the product without NXP Semiconductors' warranty of the product for such automotive applications, use and specifications, and (b) whenever customer uses the product for automotive applications beyond NXP Semiconductors' specifications such use shall be solely at customer's own risk, and (c) customer fully indemnifies NXP Semiconductors for any liability, damages or failed product claims resulting from customer design and use of the product for automotive applications beyond NXP Semiconductors' standard warranty and NXP Semiconductors' product specifications. Translations -- A non-English (translated) version of a document is for reference only. The English version shall prevail in case of any discrepancy between the translated and English versions. 13.4 Trademarks Notice: All referenced brands, product names, service names and trademarks are the property of their respective owners. 14. Contact information For more information, please visit: http://www.nxp.com For sales office addresses, please send an email to: salesaddresses@nxp.com BF1118_1118R_1118W_1118WR All information provided in this document is subject to legal disclaimers. Product data sheet Rev. 3 -- 14 November 2014 (c) NXP Semiconductors N.V. 2014. All rights reserved. 12 of 13 NXP Semiconductors BF1118(R); BF1118W(R) Silicon RF switches 15. Contents 1 1.1 1.2 1.3 1.4 2 3 4 5 6 7 8 9 10 11 12 13 13.1 13.2 13.3 13.4 14 15 Product profile . . . . . . . . . . . . . . . . . . . . . . . . . . 1 General description . . . . . . . . . . . . . . . . . . . . . 1 Features and benefits . . . . . . . . . . . . . . . . . . . . 1 Applications . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 Quick reference data . . . . . . . . . . . . . . . . . . . . 1 Pinning information . . . . . . . . . . . . . . . . . . . . . . 2 Ordering information . . . . . . . . . . . . . . . . . . . . . 2 Marking . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 Limiting values. . . . . . . . . . . . . . . . . . . . . . . . . . 3 Thermal characteristics . . . . . . . . . . . . . . . . . . 3 Static characteristics. . . . . . . . . . . . . . . . . . . . . 4 Dynamic characteristics . . . . . . . . . . . . . . . . . . 4 Package outline . . . . . . . . . . . . . . . . . . . . . . . . . 6 Handling information. . . . . . . . . . . . . . . . . . . . 10 Abbreviations . . . . . . . . . . . . . . . . . . . . . . . . . . 10 Revision history . . . . . . . . . . . . . . . . . . . . . . . . 10 Legal information. . . . . . . . . . . . . . . . . . . . . . . 11 Data sheet status . . . . . . . . . . . . . . . . . . . . . . 11 Definitions . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11 Disclaimers . . . . . . . . . . . . . . . . . . . . . . . . . . . 11 Trademarks. . . . . . . . . . . . . . . . . . . . . . . . . . . 12 Contact information. . . . . . . . . . . . . . . . . . . . . 12 Contents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13 Please be aware that important notices concerning this document and the product(s) described herein, have been included in section `Legal information'. (c) NXP Semiconductors N.V. 2014. All rights reserved. For more information, please visit: http://www.nxp.com For sales office addresses, please send an email to: salesaddresses@nxp.com Date of release: 14 November 2014 Document identifier: BF1118_1118R_1118W_1118WR