PNP EPITAXIAL PLANAR SILICON TRANSISTOR CMBA857
SOT23
MARKING : AS BELOW
ABSOLUTE MAXIMUM RATINGS
DESCRIPTION SYMBOL VALUE UNIT
Collector -Base Voltage VCBO 60 V
Collector -Emitter Voltage VCEO 50 V
Emitter Base Voltage VEBO 6.0 V
Collector Current IC 200 mA
Collector Power Dissipation PC 200 mW
Junction Temperature Tj 125 deg C
Storage Temperature Tstg -55 to +125 deg C
ELECTRICAL CHARACTERISTICS (Ta=25 deg C unless otherwise specified)
DESCRIPTION SYMBOL TEST CONDITION MIN TYP MAX UNIT
Collector -Emitter Voltage VCEO IC=100uA, IB=0 50 - - V
Collector Cut off Current ICBO VCB=60V, IE=0 - - 100 nA
Emitter Cut off Current IEBO VEB=6V, IC=0 - - 100 nA
DC Current Gain hFE(1) IC=1mA,VCE=6V 150 - 500
hFE(2) IC=0.1mA,VCE=6V 90 - -
Collector Emitter Saturation Voltage VCE(Sat) IC=100mA,IB=10mA - - 0.30 V
Base Emitter Saturation Voltage VBE(Sat) IC=100mA,IB=10mA - - 1.0 V
Dynamic Characteristics
Transition Frequency ft VCE=6V,IC=10mA, - 200 - MHz
Collector Output Capacitance Cob VCB=6V, IE=0 - 4.0 - pF
f=1MHz
Noise Figure NF VCE=6V, IE=0.3mA - - 20 dB
f=100Hz, Rg=10kohms
CLASSIFICATION E F
hFE(1) 150-300 250-500
MARKING PA PB
PIN CONF IG URATION (PNP)
1 = BA SE
2 = EMITTE R
3 = COLLECTOR
2
1
3
Continental Device India Limited Data Sheet Page 1 of 3
Continental Device India Limited
An ISO/TS 16949, ISO 9001 and ISO 14001 Certified Company
Tape Specification for SOT-23 Surface Mount Device
SOT-23 Package Reel Information
Reel specifications for W" Packing (13" reel)
SOT-23 Formed SMD Package
SOT-23 T&R 3K/reel
10K/reel
136 gm/3K pcs
415 gm/10K pcs
3" x 7.5" x 7.5"
9" x 9" x 9"
13" x 13" x 0.5"
12.0K
51.0K
10.0K
17" x 15" x 13.5"
19" x 19" x 19"
17" x 15" x 13.5"
192.0K
408.0K
300.0K
12 kgs
28 kgs
16 kgs
PACKAGE
Net Weight/QtyDetails
STANDARD PACK INNER CARTON BOX
Qty
OUTER CARTON BOX
Qty Gr WtSize Size
Packing Detail
ø329.2±0.5 / 178 ±0.5
14.4
7.9 – 10.9
TRAILER
FIXING
TAPE
LEADER
9.2±0.5
MAX
ø100.0±0.5 / 54.5 ±0.5ø
2.0±0.5
ø20.2 MIN
DETAIL X
ø13.0
+0.5
–0.2
All dimensions in mm
330 / 180 mm – Antistatic Coated Plastic Reel
NOTES:
No. of Devices
8mm Tape
Size of Reel
330 mm (13")
10,000 Pcs
8mm Tape
Size of Reel
180 mm (7")
3,000 Pcs
The bandolier of 330 mm reel contains at least 10,000 devices.
The bandolier of 180 mm reel contains at least 3,000 devices.
No more than 0.5% missing devices / reel. 50 empty compartments for 330 mm reel.
15 empty compartments for 180 mm reel.
Three consecutive empty places might be found provided this gap is followed by 6
consecutive devices.
The carrier tape (leader) starts with at least 75 empty positions (equivalent to 330
mm). In order to fix the carrier tape a self adhesive tape of 20 to 50 mm is applied. At
the end of the bandolier at least 40 empty positions (equivalent to 160 mm) are there.
180
or
330
1.
2.
3.
4.
5.
1.6
MAX
1.22
2.77
8.0
±0.1
±0.10
+0.3 3.5
±0.05
±0.1
±
0
.
1
±0.05 ±0.1 ±0.05
4.0
4.0 1.55
2.0
1.75
5.75
MAX
±0.05
±0.10
3.15
1.0
- 0.1
Direction of Unreelin
g
All dimensions in mm
± 0.02
± 0.02 1.30 0.600.60 7°
0.08
PARTING LINE
RO.08
0.21
6°
7° 5°±3"
±0.05
2.50
±4"
±
0
.
01
0.12
0.08
R0.08
±0.02
±0.025
0.95
0.06
±0.04
0.60
± 0.02
2.50
0.60
+0.08
-0.02
1.30
±
0
.
05
±0.025 ±0.02
0.40
3° 3
°
0.60
±0.025
2.90
1.90
±0.05
cL
1
2
3
Continental Device India Limited Data Sheet Page 2 of 3
Notes
Disclaimer
The product information and the selection guides facilitate selection of the CDIL's Discrete Semiconductor Device(s) best suited
for application in your product(s) as per your requirement. It is recommended that you completely review our Data Sheet(s) so as
to confirm that the Device(s) meet functionality parameters for your application. The information furnished on the CDIL Web
Site/CD is believed to be accurate and reliable. CDIL however, does not assume responsibility for inaccuracies or incomplete
information. Furthermore, CDIL does not assume liability whatsoever, arising out of the application or use of any CDIL product;
neither does it convey any license under its patent rights nor rights of others. These products are not designed for use in life
saving/support appliances or systems. CDIL customers selling these products (either as individual Discrete Semiconductor
Devices or incorporated in their end products), in any life saving/support appliances or systems or applications do so at their own
risk and CDIL will not be responsible for any damages resulting from such sale(s).
CDIL strives for continuous improvement and reserves the right to change the specifications of its products without prior notice.
CDIL is a registered Trademark of
Continental Device India Limited
C-120 Naraina Industrial Area, New Delhi 110 028, India.
Telephone + 91-11-579 6150 Fax + 91-11-579 9569, 579 5290
e-mail sales@cdil.com www.cdil.com
Continental Device India Limited Data Sheet Page 3 of 3
