2N6107, 2N6109, 2N6111 (PNP), 2N6288, 2N6292 (NPN) Complementary Silicon Plastic Power Transistors These devices are designed for use in general-purpose amplifier and switching applications. www.onsemi.com Features * * * * 7 AMPERE POWER TRANSISTORS COMPLEMENTARY SILICON 30 - 50 - 70 VOLTS, 40 WATTS High DC Current Gain High Current Gain - Bandwidth Product TO-220 Compact Package These Devices are Pb-Free and are RoHS Compliant* MAXIMUM RATINGS (Note 1) Rating Collector-Emitter Voltage 2N6111, 2N6288 2N6109 2N6107, 2N6292 Symbol Value Unit VCEO 30 50 70 VCB Emitter-Base Voltage VEB 5.0 Vdc IC 7.0 Adc ICM 10 Adc Base Current IB 3.0 Adc Total Power Dissipation @ TC = 25_C Derate above 25_C PD 40 0.32 W W/C -65 to +150 C Collector Current - Peak Operating and Storage Junction Temperature Range COLLECTOR 2, 4 COLLECTOR 2, 4 1 BASE 1 BASE Vdc 40 60 80 TJ, Tstg NPN Vdc Collector-Base Voltage 2N6111, 2N6288 2N6109 2N6107, 2N6292 Collector Current - Continuous PNP EMITTER 3 EMITTER 3 4 TO-220 CASE 221A STYLE 1 1 2 3 MARKING DIAGRAM Stresses exceeding those listed in the Maximum Ratings table may damage the device. If any of these limits are exceeded, device functionality should not be assumed, damage may occur and reliability may be affected. 1. Indicates JEDEC Registered Data. 2N6xxxG AYWW THERMAL CHARACTERISTICS Characteristics Symbol Max Unit Thermal Resistance, Junction-to-Case RqJC 3.125 _C/W 2N6xxx xxx G A Y WW *For additional information on our Pb-Free strategy and soldering details, please download the ON Semiconductor Soldering and Mounting Techniques Reference Manual, SOLDERRM/D. (c) Semiconductor Components Industries, LLC, 2014 November, 2014 - Rev. 11 1 = Specific Device Code = See Table on Page 4 = Pb-Free Package = Assembly Location = Year = Work Week ORDERING INFORMATION See detailed ordering, marking, and shipping information in the package dimensions section on page 4 of this data sheet. Publication Order Number: 2N6107/D 2N6107, 2N6109, 2N6111 (PNP), 2N6288, 2N6292 (NPN) ELECTRICAL CHARACTERISTICS (TC = 25_C unless otherwise noted) (Note 2) Characteristic Symbol Min Max Unit OFF CHARACTERISTICS VCEO(sus) Collector-Emitter Sustaining Voltage (Note 3) (IC = 100 mAdc, IB = 0) 2N6111, 2N6288 2N6109 2N6107, 2N6292 Vdc 30 50 70 Collector Cutoff Current (VCE = 20 Vdc, IB = 0) 2N6111, 2N6288 (VCE = 40 Vdc, IB = 0) 2N6109 (VCE = 60 Vdc, IB = 0) 2N6107, 2N6292 ICEO Collector Cutoff Current (VCE = 40 Vdc, VEB(off) = 1.5 Vdc) 2N6111, 2N6288 (VCE = 60 Vdc, VEB(off) = 1.5 Vdc) 2N6109 (VCE = 80 Vdc, VEB(off) = 1.5 Vdc) 2N6107, 2N6292 (VCE = 30 Vdc, VEB(off) = 1.5 Vdc, TC = 150_C) 2N6111, 2N6288 (VCE = 50 Vdc, VEB(off) = 1.5 Vdc, TC = 150_C) 2N6109 (VCE = 70 Vdc, VEB(off) = 1.5 Vdc, TC = 150_C) 2N6107, 2N6292 ICEX Emitter Cutoff Current (VBE = 5.0 Vdc, IC = 0) IEBO - - - mAdc - 1.0 - 1.0 - 1.0 - 100 - 100 - 100 - 2.0 - 2.0 - 2.0 - 1.0 mAdc mAdc mAdc ON CHARACTERISTICS (Note 3) DC Current Gain (IC = 2.0 Adc, VCE = 4.0 Vdc) 2N6107, 2N6292 (IC = 2.5 Adc, VCE = 4.0 Vdc) 2N6109 (IC = 3.0 Adc, VCE = 4.0 Vdc) 2N6111, 2N6288 (IC = 7.0 Adc, VCE = 4.0 Vdc) All Devices hFE Collector-Emitter Saturation Voltage (IC = 7.0 Adc, IB = 3.0 Adc) VCE(sat) Base-Emitter On Voltage (IC = 7.0 Adc, VCE = 4.0 Vdc) VBE(on) - 30 150 30 150 30 150 2.3 - - 3.5 - 3.0 Vdc Vdc DYNAMIC CHARACTERISTICS Current Gain - Bandwidth Product (Note 4) (IC = 500 mAdc, VCE = 4.0 Vdc, ftest = 1.0 MHz) 2N6288, 2N6292 2N6107, 2N6109, 2N6111 fT Output Capacitance (VCB = 10 Vdc, IE = 0, f = 1.0 MHz) Cob Small-Signal Current Gain (IC = 0.5 Adc, VCE = 4.0 Vdc, f = 50 kHz) hfe MHz 4.0 10 - - - 250 20 - pF - Product parametric performance is indicated in the Electrical Characteristics for the listed test conditions, unless otherwise noted. Product performance may not be indicated by the Electrical Characteristics if operated under different conditions. 2. Indicates JEDEC Registered Data. 3. Pulse Test: Pulse Width 300 ms, Duty Cycle 2.0%. 4. fT = |hfe| * ftest http://onsemi.com 2 2N6107, 2N6109, 2N6111 (PNP), 2N6288, 2N6292 (NPN) PD, POWER DISSIPATION (WATTS) 40 30 20 10 0 0 20 40 60 80 100 120 TC, CASE TEMPERATURE (C) 140 160 Figure 1. Power Derating VCC +30 V 2.0 TJ = 25C VCC = 30 V IC/IB = 10 1.0 25 ms RC +11 V 0.7 0.5 SCOPE t, TIME (s) RB 0 D1 51 -9.0 V tr, tf 10 ns DUTY CYCLE = 1.0% 0.3 0.2 tr 0.1 0.07 0.05 -4 V RB and RC ARE VARIED TO OBTAIN DESIRED CURRENT LEVELS td @ VBE(off) 5.0 V 0.03 0.02 0.07 0.1 D1 MUST BE FAST RECOVERY TYPE, eg: 1N5825 USED ABOVE IB 100 mA MSD6100 USED BELOW IB 100 mA 1.0 0.2 0.3 0.5 2.0 IC, COLLECTOR CURRENT (AMP) r(t), TRANSIENT THERMAL RESISTANCE (NORMALIZED) Figure 2. Switching Time Test Circuit 1.0 0.7 0.5 0.3 0.2 0.1 0.07 0.05 5.0 7.0 Figure 3. Turn-On Time D = 0.5 0.2 0.1 ZqJC(t) = r(t) RqJC RqJC = 3.125C/W MAX D CURVES APPLY FOR POWER PULSE TRAIN SHOWN READ TIME AT t1 TJ(pk) - TC = P(pk) ZqJC(t) 0.05 0.02 0.03 0.02 0.01 0.01 3.0 0.01 SINGLE PULSE 0.02 0.05 0.1 0.2 0.5 1.0 2.0 5.0 t, TIME (ms) 10 Figure 4. Thermal Response http://onsemi.com 3 20 50 P(pk) t1 t2 DUTY CYCLE, D = t1/t2 100 200 500 1.0 k IC, COLLECTOR CURRENT (AMPS) 2N6107, 2N6109, 2N6111 (PNP), 2N6288, 2N6292 (NPN) 15 10 There are two limitations on the power handling ability of a transistor: average junction temperature and second breakdown. Safe operating area curves indicate IC - VCE limits of the transistor that must be observed for reliable operation; i.e., the transistor must not be subjected to greater dissipation than the curves indicate. The data of Figure 5 is based on TJ(pk) = 150_C; TC is variable depending on conditions. Second breakdown pulse limits are valid for duty cycles to 10% provided TJ(pk) 150_C. TJ(pk) may be calculated from the data in Figure 4. At high case temperatures, thermal limitations will reduce the power that can be handled to values less than the limitations imposed by second breakdown. 0.1 ms 0.5 ms 7.0 5.0 dc 3.0 2.0 0.1 ms CURRENT LIMIT SECONDARY BREAKDOWN LIMIT THERMAL LIMIT @ TC = 25C (SINGLE PULSE) 1.0 0.7 0.5 0.3 0.2 0.15 1.0 5.0 ms 2.0 3.0 20 30 50 5.0 7.0 10 VCE, COLLECTOR-EMITTER VOLTAGE (VOLTS) 70 100 Figure 5. Active-Region Safe Operating Area 300 5.0 t, TIME (s) 2.0 ts 1.0 0.7 0.5 TJ = 25C VCC = 30 V IC/IB = 10 IB1 = IB2 200 C, CAPACITANCE (pF) 3.0 tr 0.3 0.2 TJ = 25C Cib 100 70 Cob 50 0.1 0.07 0.05 0.07 0.1 0.2 1.0 0.3 0.5 2.0 3.0 IC, COLLECTOR CURRENT (AMP) 30 0.5 5.0 7.0 1.0 Figure 6. Turn-Off Time 10 20 2.0 3.0 5.0 VR, REVERSE VOLTAGE (VOLTS) Figure 7. Capacitance ORDERING INFORMATION Device Device Marking Package Shipping 2N6107G 2N6107 TO-220 (Pb-Free) 50 Units / Rail 2N6109G 2N6109 TO-220 (Pb-Free) 50 Units / Rail 2N6111G 2N6111 TO-220 (Pb-Free) 50 Units / Rail 2N6288G 2N6288 TO-220 (Pb-Free) 50 Units / Rail 2N6292G 2N6292 TO-220 (Pb-Free) 50 Units / Rail http://onsemi.com 4 30 50 2N6107, 2N6109, 2N6111 (PNP), 2N6288, 2N6292 (NPN) PACKAGE DIMENSIONS TO-220 CASE 221A-09 ISSUE AH -T- B SEATING PLANE C F T S 4 DIM A B C D F G H J K L N Q R S T U V Z A Q 1 2 3 U H K Z L R V NOTES: 1. DIMENSIONING AND TOLERANCING PER ANSI Y14.5M, 1982. 2. CONTROLLING DIMENSION: INCH. 3. DIMENSION Z DEFINES A ZONE WHERE ALL BODY AND LEAD IRREGULARITIES ARE ALLOWED. J G D INCHES MIN MAX 0.570 0.620 0.380 0.415 0.160 0.190 0.025 0.038 0.142 0.161 0.095 0.105 0.110 0.161 0.014 0.024 0.500 0.562 0.045 0.060 0.190 0.210 0.100 0.120 0.080 0.110 0.045 0.055 0.235 0.255 0.000 0.050 0.045 ----0.080 MILLIMETERS MIN MAX 14.48 15.75 9.66 10.53 4.07 4.83 0.64 0.96 3.61 4.09 2.42 2.66 2.80 4.10 0.36 0.61 12.70 14.27 1.15 1.52 4.83 5.33 2.54 3.04 2.04 2.79 1.15 1.39 5.97 6.47 0.00 1.27 1.15 ----2.04 N STYLE 1: PIN 1. 2. 3. 4. BASE COLLECTOR EMITTER COLLECTOR ON Semiconductor and the are registered trademarks of Semiconductor Components Industries, LLC (SCILLC) or its subsidiaries in the United States and/or other countries. SCILLC owns the rights to a number of patents, trademarks, copyrights, trade secrets, and other intellectual property. A listing of SCILLC's product/patent coverage may be accessed at www.onsemi.com/site/pdf/Patent-Marking.pdf. SCILLC reserves the right to make changes without further notice to any products herein. SCILLC makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does SCILLC assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. "Typical" parameters which may be provided in SCILLC data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including "Typicals" must be validated for each customer application by customer's technical experts. SCILLC does not convey any license under its patent rights nor the rights of others. SCILLC products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or other applications intended to support or sustain life, or for any other application in which the failure of the SCILLC product could create a situation where personal injury or death may occur. Should Buyer purchase or use SCILLC products for any such unintended or unauthorized application, Buyer shall indemnify and hold SCILLC and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that SCILLC was negligent regarding the design or manufacture of the part. SCILLC is an Equal Opportunity/Affirmative Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner. PUBLICATION ORDERING INFORMATION LITERATURE FULFILLMENT: Literature Distribution Center for ON Semiconductor P.O. Box 5163, Denver, Colorado 80217 USA Phone: 303-675-2175 or 800-344-3860 Toll Free USA/Canada Fax: 303-675-2176 or 800-344-3867 Toll Free USA/Canada Email: orderlit@onsemi.com N. American Technical Support: 800-282-9855 Toll Free USA/Canada Europe, Middle East and Africa Technical Support: Phone: 421 33 790 2910 Japan Customer Focus Center Phone: 81-3-5817-1050 http://onsemi.com 5 ON Semiconductor Website: www.onsemi.com Order Literature: http://www.onsemi.com/orderlit For additional information, please contact your local Sales Representative 2N6107/D