34TECHNICAL 34 HEATING DATASHEET >>Compact and slim design >>High heating performance >>Double insulated >>With or without thermostat >>Quick connection The compact high performance fan heater prevents formation of condensation and frost and provides an evenly distributed interior air temperature in enclosures with electric/electronic components. The plastic housing provides double insulation and acts as protection against contact. Two screw connectors at the front of CS 032 allow comfortable wiring of an external thermostat. The CSF 032 is equipped with a pre-set thermostat. Both models were designed for wall fixing. A fan heater for fixing on the bottom of the enclosure is available on request. Fan heater CS 032 TECHNICAL DATA Fan heater CSF 032 Heating element PTC resistor - temperature limiting Surface temperature max. +80 C (+176 F), except upper protective grille at +20 C (+68 F) ambient temperature Temperature safety cut-out to protect against overheating in case of fan failure, automatic reset Axial fan, ball bearing air flow 63 m/h, free flow service life 70,000 h at 25 C (77 F) Connection male power insert connector according to IEC320 C18 Casing plastic according to UL94 V-0, black Mounting clip for 35 mm DIN rail, EN 60715 or screw fixing (M5), tightening torque 2 Nm max. Fitting position airflow direction up Dimensions 152.5 x 88 x 66 mm Weight approx. 0.5 kg Operation/Storage temperature -40 to +60 C (-40 to +140 F) / -40 to +70 C (-40 to +158 F) Operation/Storage humidity max. 90 % RH (non-condensing) Protection type/Protection class IP20 / II (double insulated) Approvals VDE, UL File No. E234324, EAC Important note: Connectors and cables for electrical connection are not included in the delivery. Connection cables can be ordered separately, see Accessories. FAN HEATER CS 032 (WITHOUT THERMOSTAT) Art. No. Clip fixing Art. No. Screw fixing Operating voltage Heating capacity 03209.0-00 03209.0-01 AC 220 - 240 V, 50/60 Hz 1,000 W Inrush current max. 12.0 A 03209.9-00 03209.9-01 AC 100 - 120 V, 50/60 Hz 1,000 W 18.0 A FAN HEATER CSF 032 (WITH THERMOSTAT) Art. No. Clip fixing Art. No. Screw fixing Operating voltage Heating capacity Inrush current max. Switch-off temperature Switch-on temperature 03201.0-00 03201.0-01 AC 220 - 240 V, 50/60 Hz 1,000 W 12.0 A +25 C (+77 F) +15 C (+59 F) 03202.0-00 03202.0-01 AC 220 - 240 V, 50/60 Hz 1,000 W 12.0 A +15 C (+59 F) +5 C (+41 F) 03201.9-00 03201.9-01 AC 100 - 120 V, 50/60 Hz 1,000 W 18.0 A +25 C (+77 F) +15 C (+59 F) 03202.9-00 03202.9-01 AC 100 - 120 V, 50/60 Hz 1,000 W 18.0 A +15 C (+59 F) +5 C (+41 F) at +25 C (+77 F) ambient temperature; tolerance 5 K Note: Other switch-off and switch-on temperatures on request. 19.03.2019 | Specifications are subject to change without notice. Errors and omissions excepted. Suitability of this product for its intended use and any associated risks must be determined by the end customer/buyer in its final application. HIGH-PERFORMANCE FAN HEATER (SEMICONDUCTOR) CS 032 / CSF 032 | 1,000 W www.stego.de | www.stego.co.uk | www.stegonorden.se PRODUCT CATALOGUE - STEGO HEATING 35 35 TECHNICAL DRAWING CS 032 Fan Heater CSF 032 Fan Heater with Integrated Thermostat Heating capacity / Ambient temperature diagram View: back side Clip fixing Heating capacity (W) Screw fixing Temperature ( C) ACCESSORIES Connection cable with female power insert connector according IEC320 C17 Art. No. Length (L) 244379 1.0 m 244380 2.0 m Retaining Clip Photo: Retaining Clip art. no. 237009 in built-in state Art. No. Note 237009 Suitable for female power insert connector on connection cable 244379 and 244380 19.03.2019 | Specifications are subject to change without notice. Errors and omissions excepted. Suitability of this product for its intended use and any associated risks must be determined by the end customer/buyer in its final application. www.stego.de | www.stego.co.uk | www.stegonorden.se STEGO - PRODUCT CATALOGUE TECHNICAL DATASHEET