3MTM PCB .100 x .100 Two Row 78XX Series * Single connector termination reduces overall connector cost * 7.3 mm terminated height for applications requiring low-profile off the board * Solder bumps facilitate board cleaning * Fits standard .100" x .100" header layout * Uses less board area than 4-row design * RoHS* compliant Date Modified: March 1, 2006 TS-2104-02 Sheet 1 of 2 Physical Insulation Material: Flammability: Color: Contact Material: Glass Filled Ployester UL 94V-0 Gray Beryllium Copper Plating Underplating: 100 [ 2.54m ] Nickel U slot and Solder Tails: Gold flash Wire Accommodation: 26 AWG Stranded, 28 AWG Solid or Stranded, 30 AWG Solid Electrical Current Rating: 1.0 A Insulation Resistance: > 1000 M min. at 500 VDC Withstanding Voltage: 1000 V AC for 1 minute Environmental Temperature Rating: -55C to +105C Note: May require process accommodations in "no lead" soldering. *"RoHS compliant" means that the product or part does not contain any of the following substances in excess of the following maximum concentration values in any homogeneous material, unless the substance is in an application that is exempt under RoHS: (a) 0.1% (by weight) for lead, mercury, hexavalent chromium, polybrominated biphenyls or polybrominated diphenyl ethers; or (b) 0.01% (by weight) for cadmium. Unless otherwise stated in writing by 3M, this information represents 3M's knowledge and belief based on information provided by third party suppliers to 3M. UL File No.: E68080 3M Interconnect Solutions http://www.3M.com/interconnects/ 3M is a trademark of 3M Company. For technical, sales or ordering information call 800-225-5373 3MTM PCB .100 x .100 Two Row 78XX Series Transfer Adhesive Position 1 Indicator See Ordering Inforamation C ontact Q uantity A B C 10 17.4 17.8 10.2 14 22.5 22.9 15.2 16 25 25.4 17.8 20 30.1 30.5 22.9 26 37.7 38.1 30.5 30 42.8 43.2 35.6 34 47.9 48.3 40.6 40 55.5 55.9 48.3 50 68.2 68.6 61 60 80.9 81.3 73.7 64 86 86.4 78.7 Solder Bump Assembled Dimensions Recommended Board Layout mm [inc h ] T o le ra n c e U n les s N o te d .0 .0 0 m m .3 .1 3 Ordering Information 78XX-000XPR Contact Quantity: See Table Assembly Equipment: 3640 press (or equivalent), 3443-71 Locator Plate, 3442-9 Platen. 3M Interconnect Solutions http://www.3M.com/interconnects/ Solder Tail Length: 0 = 2.8 mm 6 = 3.8 mm TS-2104-02 Sheet 2 of 2 3M is a trademark of 3M Company. For technical, sales or ordering information call 800-225-5373 Important Notice All statements, technical information, and recommendations related to 3M's products are based on information believed to be reliable, but the accuracy or completeness is not guaranteed. Before using this product, you must evaluate it and determine if it is suitable for your intended application. You assume all risks and liability associated with such use. Any statements related to the product which are not contained in 3M's current publications, or any contrary statements contained on your purchase order shall have no force or effect unless expressly agreed upon, in writing, by an authorized officer of 3M. Warranty; Limited Remedy; Limited Liability. This product will be free from defects in material and manufacture for a period of one (1) year from the time of purchase. 3M MAKES NO OTHER WARRANTIES INCLUDING, BUT NOT LIMITED TO, ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. If this product is defective within the warranty period stated above, your exclusive remedy shall be, at 3M's option, to replace or repair the 3M product or refund the purchase price of the 3M product. Except where prohibited by law, 3M will not be liable for any indirect, special, incidental or consequential loss or damage arising from this 3M product, regardless of the legal theory asserted. 3 3M Electronics 6801 River Place Blvd. Austin, TX 78726-9000 800/225-5373 www.3M.com/electronics Minimum 10% Post-Consumer Fiber Printed in USA. (c) 3M 2006