3M
Interconnect Solutions
http://www.3M.com/interconnects/
3M is a trademark of 3M Company.
For technical, sales or ordering information call
800-225-5373
3M™ PCB
.100″ x .100″ Two Row 78XX Series
Physical
Electrical
Environmental
*"RoHS compliant" means that the product or part does not contain any of the following substances in excess of the following maximum concentration
values in any homogeneous material, unless the substance is in an application that is exempt under RoHS: (a) 0.1% (by weight) for lead, mercury,
hexavalent chromium, polybrominated biphenyls or polybrominated diphenyl ethers; or (b) 0.01% (by weight) for cadmium. Unless otherwise stated in
writing by 3M, this information represents 3M's knowledge and belief based on information provided by third party suppliers to 3M.
Insulation
Material: Glass Filled Ployester
Flammability: UL 94V-0
Color: Gray
Contact
Material: Beryllium Copper
Plating
Underplating: 100µ″ [ 2.54µm ] Nickel
U slot and Solder Tails: Gold flash
Wire Accommodation: 26 AWG Stranded, 28 AWG Solid or Stranded, 30 AWG Solid
Current Rating: 1.0 A
Insulation Resistance: > 1000 MΩ min. at 500 VDC
Withstanding Voltage: 1000 V AC for 1 minute
Temperature Rating: -55°C to +105°C
TS-2104-02
Sheet 1 of 2
• Single connector termination reduces overall
connector cost
• 7.3 mm terminated height for applications
requiring low-profile off the board
• Solder bumps facilitate board cleaning
• Fits standard .100” x .100” header layout
• Uses less board area than 4-row design
• RoHS* compliant
Date Modified: March 1, 2006
UL File No.: E68080
Note: May require process accommodations in “no lead” soldering.
3M
Interconnect Solutions
http://www.3M.com/interconnects/
3M is a trademark of 3M Company.
For technical, sales or ordering information call
800-225-5373
3M™ PCB
.100″ x .100″ Two Row 78XX Series
Ordering Information
78XX-000XPR
TS-2104-02
Sheet 2 of 2
Contact Quantity:
See Table
Contact
Quantity A B C
10 17.4 17.8 10.2
14 22.5 22.9 15.2
16 25 25.4 17.8
20 30.1 30.5 22.9
26 37.7 38.1 30.5
30 42.8 43.2 35.6
34 47.9 48.3 40.6
40 55.5 55.9 48.3
50 68.2 68.6 61
60 80.9 81.3 73.7
64 86 86.4 78.7
mm
[inch]
Tolerance U nless
Noted
.0 .00
mm ±.3 ±.13
Recommended Board Layout
Assembled Dimensions
Solder Bump
Position 1 Indicator
Transfer Adhesive
Solder Tail Length:
0 = 2.8 mm
6 = 3.8 mm
Assembly Equipment: 3640 press (or equivalent), 3443-71 Locator Plate, 3442-9 Platen.
See Ordering
Inforamation
3
Printed in USA.
Minimum 10%
Post-Consumer Fiber
Important Notice
All statements, technical information, and recommendations
related to 3M’s products are based on information believed to be
reliable, but the accuracy or completeness is not guaranteed.
Before using this product, you must evaluate it and determine if it
is suitable for your intended application. You assume all risks and
liability associated with such use. Any statements related to the
product which are not contained in 3M’s current publications, or
any contrary statements contained on your purchase order shall
have no force or effect unless expressly agreed upon, in writing,
by an authorized officer of 3M.
Warranty; Limited Remedy; Limited Liability.
This product will be free from defects in material and
manufacture for a period of one (1) year from the time of
purchase. 3M MAKES NO OTHER WARRANTIES INCLUDING,
BUT NOT LIMITED TO, ANY IMPLIED WARRANTY OF
MERCHANTABILITY OR FITNESS FOR A PARTICULAR
PURPOSE. If this product is defective within the warranty period
stated above, your exclusive remedy shall be, at 3M’s option, to
replace or repair the 3M product or refund the purchase price of
the 3M product. Except where prohibited by law, 3M will not
be liable for any indirect, special, incidental or consequential
loss or damage arising from this 3M product, regardless of
the legal theory asserted.
3M Electronics
6801 River Place Blvd.
Austin, TX 78726-9000
800/225-5373
www.3M.com/electronics © 3M 2006
