Technical Data Sheet
6364/G1DA-ANQA/X/MS
Everlight Electronics Co., Ltd. http\\:www.everlight.com Rev 2 Page: 1 of 7
Device Number : DLE-636-025 Prepared date: 11-01-2005 Prepared by: Grace Shen
Features
․High luminous intensity output
․Oval Shape
․Well defined spatial radiation
․Wide viewing angle (2θ1/2) : 70o / 40o
․UV resistant epoxy
․ESD-withstand voltage: up to 4KV
․The product itself will remain within RoHS compliant version.
Descriptions
․This precision optical performance oval LED is specifically
designed for passenger information signs
․This lamp has matched radiation patterns with red and blue
mixing color applications
․Superior performance in outdoor environment
Applications
․Single or dual color graphic signs
․Message boards
․Variable message signs (VMS)
․Commercial outdoor advertising
Device Selection Guide Chip
LED Part No. Material Emitted
Color
Lens Color Stopper
6364/G1DA-ANQA/MS NO
6364/G1DA-ANQA/P/MS InGaN Super Green Green Diffused YES
Technical Data Sheet
6364/G1DA-ANQA/X/MS
Everlight Electronics Co., Ltd. http\\:www.everlight.com Rev 2 Page: 2 of 7
Device Number : DLE-636-025 Prepared date: 11-01-2005 Prepared by: Grace Shen
Package Dimensions
Stopper Type
No Stopper Type
Notes:
․Stopper tolerance is +0.2/-0.1mm .
․Other dimensions are in millimeters, tolerance is 0.25mm except being specified.
․Protruded resin under flange is 1.5mm Max LED.
․Bare copper alloy is exposed at tie-bar portion after cutting.
Technical Data Sheet
6364/G1DA-ANQA/X/MS
Everlight Electronics Co., Ltd. http\\:www.everlight.com Rev 2 Page: 3 of 7
Device Number : DLE-636-025 Prepared date: 11-01-2005 Prepared by: Grace Shen
Absolute Maximum Rating (Ta=25℃)
Parameter Symbol Absolute Maximum Rating Unit
Forward Current IF 30 mA
Pulse Forward Current (Duty1/10@ 1KHz) IFP 100 mA
Operating Temperature Topr -40 ~ +85 ℃
Storage Temperature Tstg -40 ~ +100 ℃
Electrostatic Discharge ESD 4K V
Soldering Temperature Tsol 260 ±5 ℃
Power Dissipation Pd 110 mW
Zener Reverse Current Iz 100 mA
Reverse Voltage VR 5 V
Notes: Soldering time≦5 seconds.
Electro-Optical Characteristics (Ta=25℃)
Parameter Symbol Min. Typ. Max. Unit Condition
Luminous Intensity IV 2250 2850 4500 mcd
Viewing Angle 2θ1/2 -- X:70Y:40 -- deg
Peak Wavelength λp -- 518 --
Dominant Wavelength λd -- 525 --
Spectrum Half width Δλ -- 35 -- nm
Forward Voltage VF -- 3.2 3.6 V
IF=20mA
Zener Reverse Voltage Vz 5.2 -- -- V Iz=5mA
Reverse Current IR -- -- 10
μA VR=5V
Rank Combination (IF=20mA)
Rank N P Q
Luminous Intensity 2250~2850 2850~3600 3600~4500
*Measurement Uncertainty of Luminous Intensity: ±15% Unit:mcd
Rank 0 1 2 3
Forward Voltage 2.8~3.0 3.0~3.2 3.2~3.4 3.4~3.6
*Measurement Uncertainty of Forward Voltage: ±0.1V Unit:V
Rank 4 5
Dominant Wavelength 524~528 528~532
*Measurement Uncertainty of Dominant Wavelength ±1.0nm Unit:nm
*The quantity ratio of the ranks is decided by EVERLIGHT.
Technical Data Sheet
6364/G1DA-ANQA/X/MS
Everlight Electronics Co., Ltd. http\\:www.everlight.com Rev 2 Page: 4 of 7
Device Number : DLE-636-025 Prepared date: 11-01-2005 Prepared by: Grace Shen
Typical Electro-Optical Characteristics Curves
Technical Data Sheet
6364/G1DA-ANQA/X/MS
Everlight Electronics Co., Ltd. http\\:www.everlight.com Rev 2 Page: 5 of 7
Device Number : DLE-636-025 Prepared date: 11-01-2005 Prepared by: Grace Shen
Packing Quantity Specification
1.500PCS/1Bag，5Bags/1Box
2.10Boxes/1Carton
Label Form Specification CPN: Customer’s Production Number
P/N : Production Number
QTY: Packing Quantity
CAT: Ranks of Luminous and Forward Voltage
HUE: Ranks of Dominant Wavelength
REF: Reference
LOT No: Lot Number
MADE IN TAIWAN: Production Place
CPN:
P/N:
EVERLIGHT
6364/G1DA-ANQA/X/MS
QTY：
MADE IN TAIWAN
CAT:
HUE:
REF:
LOT NO：
RoHS
Technical Data Sheet
6364/G1DA-ANQA/X/MS
Everlight Electronics Co., Ltd. http\\:www.everlight.com Rev 2 Page: 6 of 7
Device Number : DLE-636-025 Prepared date: 11-01-2005 Prepared by: Grace Shen
Notes
1. Above specification may be changed without notice. EVERLIGHT will reserve authority on
material change for above specification.
2. When using this product, please observe the absolute maximum ratings and the instructions for
using outlined in these specification sheets. EVERLIGHT assumes no responsibility for any
damage resulting from use of the product which does not comply with the absolute maximum
ratings and the instructions included in these specification sheets.
3. These specification sheets include materials protected under copyright of EVERLIGHT
corporation. Please don’t reproduce or cause anyone to reproduce them without EVERLIGHT’s
consent.
4. When the LED is connected using serial circuit, if either piece of LED is no light up but current
can’t flow through causing others to light down. In new design, the LED is parallel with zener
diode. if either piece of LED is no light up but current can flow through causing others to light
up.
5. Below the zener reference voltage Vz, all the current flows through LED and as the voltage
rises to Vz, the zener diode “breakdown." If the voltage tries to rise above Vz current flows
through the zener branch to keep the voltage at exactly Vz.
Technical Data Sheet
6364/G1DA-ANQA/X/MS
Everlight Electronics Co., Ltd. http\\:www.everlight.com Rev 2 Page: 7 of 7
Device Number : DLE-636-025 Prepared date: 11-01-2005 Prepared by: Grace Shen
6. Soldering Condition
Careful attention should be paid during soldering. When soldering, leave more then 3mm
from solder joint to case, and soldering beyond the base of the tie bar is recommended.
Avoiding applying any stress to the lead frame while the LEDs are at high temperature
particularly when soldering.
Recommended soldering conditions:
Hand Soldering DIP Soldering
Temp. at tip of iron 400 Max.℃ (30W
Max.) Preheat temp. 100 Max.℃ (60 sec Max.)
Soldering time 3 sec Max. Bath temp. 265 Max.
Distance 3mm Min.(From solder
joint to case)
Bath time. 5 sec Max.
Distance 3mm Min.
EVERLIGHT ELECTRONICS CO., LTD. Tel: 886-2-2267-2000, 2267-9936
Office: No 25, Lane 76, Sec 3, Chung Yang Rd, Fax: 886-2267-6244, 2267-6189, 2267-6306
Tucheng, Taipei 236, Taiwan, R.O.C http:\\www.everlight.com
