MASWSS0204 GaAs SPDT 2.7 V High Power Switch DC - 3.0 GHz Features Rev. V3 Functional Block Diagram Low Voltage Operation: 2.7 V High IP3: +56 dBm Low Insertion Loss: 0.30 dB at 1 GHz High Isolation: 25 dB at 1 GHz 0.5 micron GaAs PHEMT Process Lead-Free SC70 Package Halogen-Free Green Mold Compound 260C Reflow Compatible RoHS* Compliant Version of MASWSS0117 RF1 V1 GND RFC 39 pF 39 pF Description RF2 The MASWSS0204 is a GaAs pHEMT MMIC single pole double throw (SPDT) high power switch in a low cost SC70 six lead package. The MASWSS0204 is ideally suited for applications where high power, low control voltage, low insertion loss, high isolation, small size and low cost are required. Typical applications are for CDMA handset systems that connect separate transceiver and/or GPS functions to a common antenna, as well as other related handset and general purpose applications. The MASWSS0204 can be used in all systems operating up to 3 GHz requiring high power at low control voltage. The MASWSS0204 is fabricated using a 0.5 micron gate length GaAs pHEMT process. The process features full passivation for performance and reliability. V2 39 pF Pin 6 Pin 1 Pin Configuration Pin No. Pin Name Description 1 V2 Vcontrol 2 2 RFC RF Common 3 V1 Vcontrol 1 4 RF1 RF Port 1 5 GND RF Ground 6 RF2 RF Port 2 MASWSS0204 orientation in tape Ordering Information 1,2 Part Number Package MASWSS0204 Bulk Packaging MASWSS0204TR-3000 3000 piece reel MASWSS0204SMB Sample Test Board 1. Reference Application Note M513 for reel size information. 2. All sample boards include 5 loose parts. Note: Device supplied on tape and reel is the reverse orientation of that shown in Application Note M513. * Restrictions on Hazardous Substances, European Union Directive 2002/95/EC. 1 M/A-COM Technology Solutions Inc. (MACOM) and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. Visit www.macom.com for additional data sheets and product information. For further information and support please visit: https://www.macom.com/support MASWSS0204 GaAs SPDT 2.7 V High Power Switch DC - 3.0 GHz Rev. V3 Electrical Specifications: TA = 25C, Vc = 0 V/2.7 V, Z0 = 50 3 Parameter Test Conditions Units Min. Typ. Max. Insertion Loss4 DC - 1 GHz 1 - 2 GHz 2 - 3 GHz dB -- -- -- 0.30 0.35 0.35 0.65 -- -- Isolation DC - 1 GHz 1 - 2 GHz 2 - 3 GHz dB 23 -- -- 25 19 15 -- -- -- Return Loss DC - 3 GHz dB -- 20 -- IP3 825 MHz Two Tone, +24 dBm Total Pin, 5 MHz Spacing dBm -- 56 -- For Cell Band: Two-tone signal input: TX1 = +22 dBm @ 820 MHz, TX2 = +22 dBm @ 821 MHz, RX interfere = -23 dBm @ 869 MHz. dBm -99 -- For PCS Band: Two-tone signal input: TX1 = +18 dBm @ 1880 MHz, TX2 = +18 dBm @ 1881 MHz, RX interfere = -23 dBm @ 1960 MHz. dBm -- -94 -- P0.1dB 1 GHz dBm -- 38 -- Trise, Tfall 10% to 90% RF, 90% to 10% RF ns -- 70 -- Ton, Toff 50% control to 90% RF, 50% control to 10% RF ns -- 100 -- Transients In Band mV -- 25 -- Control Current VC = 2.7 V A -- 5 20 Cross Modulation -- 3. For positive voltage control, external DC blocking capacitors are required on all RF ports. 4. Insertion loss can be optimized by varying the DC blocking capacitor value, e.g. 1000 pF for 100 MHz - 1 GHz, 39 pF for 0.5 - 3 GHz. Absolute Maximum Ratings 5,6 Parameter Absolute Maximum Input Power (0.5 - 3 GHz, 3 V Control) +38 dBm Operating Voltage +8.5 volts Operating Temperature -40C to +85C Storage Temperature -65C to +150C 5. Exceeding any one or combination of these limits may cause permanent damage to this device. 6. M/A-COM Technology does not recommend sustained operation near these survivability limits. Truth Table 7,8,9 V1 V2 ANT- RF1 ANT - RF2 1 0 On Off 0 1 Off On 7. For positive voltage control, external DC blocking capacitors are required on all RF ports. 8. Differential voltage, V(state 1) - V(state 0), must be +2.7 V minimum, but must not exceed 8.5 V. 9. 0 = -5 V to +2.3 V, 1 = -2.3 V to +5 V. 2 M/A-COM Technology Solutions Inc. (MACOM) and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. Visit www.macom.com for additional data sheets and product information. For further information and support please visit: https://www.macom.com/support MASWSS0204 GaAs SPDT 2.7 V High Power Switch DC - 3.0 GHz Rev. V3 Typical Performance Curves, 39 pF Insertion Loss 0.6 Qualification +25C +85C -40C 0.5 Qualified to M/A-COM specification REL-201, Process Flow -2. 0.4 Handling Procedures 0.3 Please observe the following precautions to avoid damage: 0.2 Static Sensitivity 0.1 0.0 0.5 1.0 1.5 2.0 2.5 3.0 Frequency (GHz) Isolation Gallium Arsenide Integrated Circuits are sensitive to electrostatic discharge (ESD) and can be damaged by static electricity. Proper ESD control techniques should be used when handling these devices. 40 +25C +85C -40C 30 Lead-Free SC70 Plastic Package 20 10 0 0.5 1.0 1.5 2.0 2.5 3.0 Frequency (GHz) Return Loss 0 +25C +85C -40C 5 10 15 20 25 30 35 0.0 1.0 2.0 3.0 4.0 5.0 Reference Application Note M538 for lead-free solder reflow recommendations. Meets JEDEC moisture sensitivity level 1 requirements. Plating is 100% matte tin over copper. 6.0 Frequency (GHz) 3 M/A-COM Technology Solutions Inc. (MACOM) and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. Visit www.macom.com for additional data sheets and product information. For further information and support please visit: https://www.macom.com/support MASWSS0204 GaAs SPDT 2.7 V High Power Switch DC - 3.0 GHz Rev. V3 M/A-COM Technology Solutions Inc. All rights reserved. Information in this document is provided in connection with M/A-COM Technology Solutions Inc ("MACOM") products. These materials are provided by MACOM as a service to its customers and may be used for informational purposes only. Except as provided in MACOM's Terms and Conditions of Sale for such products or in any separate agreement related to this document, MACOM assumes no liability whatsoever. MACOM assumes no responsibility for errors or omissions in these materials. MACOM may make changes to specifications and product descriptions at any time, without notice. MACOM makes no commitment to update the information and shall have no responsibility whatsoever for conflicts or incompatibilities arising from future changes to its specifications and product descriptions. No license, express or implied, by estoppels or otherwise, to any intellectual property rights is granted by this document. THESE MATERIALS ARE PROVIDED "AS IS" WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESS OR IMPLIED, RELATING TO SALE AND/OR USE OF MACOM PRODUCTS INCLUDING LIABILITY OR WARRANTIES RELATING TO FITNESS FOR A PARTICULAR PURPOSE, CONSEQUENTIAL OR INCIDENTAL DAMAGES, MERCHANTABILITY, OR INFRINGEMENT OF ANY PATENT, COPYRIGHT OR OTHER INTELLECTUAL PROPERTY RIGHT. MACOM FURTHER DOES NOT WARRANT THE ACCURACY OR COMPLETENESS OF THE INFORMATION, TEXT, GRAPHICS OR OTHER ITEMS CONTAINED WITHIN THESE MATERIALS. MACOM SHALL NOT BE LIABLE FOR ANY SPECIAL, INDIRECT, INCIDENTAL, OR CONSEQUENTIAL DAMAGES, INCLUDING WITHOUT LIMITATION, LOST REVENUES OR LOST PROFITS, WHICH MAY RESULT FROM THE USE OF THESE MATERIALS. 4 MACOM products are not intended for use in medical, lifesaving or life sustaining applications. MACOM customers using or selling MACOM products for use in such applications do so at their own risk and agree to fully indemnify MACOM for any damages resulting from such improper use or sale. M/A-COM Technology Solutions Inc. (MACOM) and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. Visit www.macom.com for additional data sheets and product information. For further information and support please visit: https://www.macom.com/support