58mm (2.3 INCH) 8x8 DOT MATRIX DISPLAY P/N: TA23-11SRWA SUPER BRIGHT RED Features Description *2.3 INCH MATRIX HEIGHT. The Super Bright Red source color devices are made *DOT SIZE 5mm. with Gallium Aluminum Arsenide Red Light Emitting *LOW CURRENT OPERATION. Diode. *HIGH CONTRAST AND LIGHT OUTPUT. *COMPATIBLE WITH ASCII AND EBCDIC CODES. *STACKABLE HORIZONTALLY. *COLUMN CATHODE AND COLUMN ANODE AVAILABLE. *EASY MOUNTING ON P.C. BOARDS OR SOCKETS. *MULTICOLOR AVAILABLE. *MECHANICALLY RUGGED. *STANDARD : GRAY FACE, WHITE DOT. *RoHS COMPLIANT. Package Dimensions & Internal Circuit Diagram Notes: 1. All dimensions are in millimeters (inches), Tolerance is 0.25(0.01")unless otherwise noted. 2. Specifications are subject to change without notice. SPEC NO: DSAD2458 REV NO: V.5 DATE: NOV/29/2005 PAGE: 1 OF 4 APPROVED: J. Lu CHECKED: Joe Lee DRAWN: Y.W.WANG ERP:1332000185 Selection Guide Part No. Dice TA23-11SRWA Iv (ucd) @ 10mA Lens Type SUPER BRIGHT RED (GaAIAs) WHITE DIFFUSED Min. Typ. 12000 44000 Description Column Anode Electrical / Optical Characteristics at TA=25C Symbol Parameter Device peak Peak Wavelength Super Bright Red D Dominant Wavelength 1/2 Typ. Max. Units Test Conditions 660 nm IF=20mA Super Bright Red 640 nm IF=20mA Spectral Line Half-width Super Bright Red 20 nm IF=20mA C Capacitance Super Bright Red 45 pF VF=0V;f=1MHz VF Forward Voltage Super Bright Red 1.85 2.5 V IF=20mA IR Reverse Current Super Bright Red 10 uA VR = 5V Absolute Maximum Ratings at TA=25C Parameter Super Bright Red Units Power dissipation 100 mW DC Forward Current 30 mA Peak Forward Current [1] 155 mA 5 V Reverse Voltage Operating / Storage Temperature -40C To +85C Lead Solder Temperature [2] 260C For 5 Seconds Notes: 1. 1/10 Duty Cycle, 0.1ms Pulse Width. 2. 2mm below package base. SPEC NO: DSAD2458 REV NO: V.5 DATE: NOV/29/2005 PAGE: 2 OF 4 APPROVED: J. Lu CHECKED: Joe Lee DRAWN: Y.W.WANG ERP:1332000185 Super Bright Red TA23-11SRWA SPEC NO: DSAD2458 REV NO: V.5 DATE: NOV/29/2005 PAGE: 3 OF 4 APPROVED: J. Lu CHECKED: Joe Lee DRAWN: Y.W.WANG ERP:1332000185 PACKING & LABEL SPECIFICATIONS TA23-11SRWA Remarks: If special sorting is required (e.g. binning based on forward voltage, luminous intensity/ luminous flux or wavelength), the typical accuracy of the sorting process is as follows: 1. Wavelength: +/-1nm 2. Luminous Intensity/ Luminous Flux: +/-15% 3. Forward Voltage: +/-0.1V Note: Accuracy may depend on the sorting parameters. SPEC NO: DSAD2458 REV NO: V.5 DATE: NOV/29/2005 PAGE: 4 OF 4 APPROVED: J. Lu CHECKED: Joe Lee DRAWN: Y.W.WANG ERP:1332000185