© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com F3025_PMR209 • 5/15/2015 1
One world. One KEMET
Benets
• Approvals: ENEC, UL, cUL
• Rated voltage: 250 VAC 50/60 Hz
• Capacitance range: 0.047 – 0.47 µF
• Capacitance tolerance: ±20%
• Resistancerange:22–470Ω
• Resistance tolerance: ±30%
• Lead spacing: 15.2 – 25.4 mm
• Climatic category: 40/085/56/B, IEC 60068–1
• Tape and reel packaging in accordance with IEC 60286–2
• RoHS Compliant and lead-free terminations
• Operatingtemperaturerangeof-40˚Cto+85˚C
• Excellent self-healing properties which ensure long life even
when subjected to frequent over voltages
• Good resistance to ionization due to impregnated paper dielectric
• High dV/dt capability
• Impregnated paper ensures excellent stability and reliability
properties, particularly in applications with continuous operation
Overview
The PMR209 Series is constructed of multilayer metallized paper
encapsulated and impregnated in self-extinguishing material
meeting the requirements of UL 94 V–0.
Applications
Typical applications include worldwide use in contact protection,
contact interference suppression and transient suppression.
AC Line EMI Suppression and RC Networks
PMR209 Series Metallized Impregnated Paper,
Class X2, 250 VAC
Legacy Part Number System
PMR209 M B 5470 M047 R30
Series Rated Voltage
(VAC)
Lead Spacing
(mm) Capacitance Code (pF) Capacitance
Tolerance Resistance(Ω) Packaging
RC Snubber,
Metallized Paper
M = 250 B = 15.2
C = 20.3
E = 25.4
The last three digits represent
signicantgures.The
rstdigitspeciesthetotal
number of digits.
M = ±20% Resistance Value
inΩ
See Ordering
Options Table
New KEMET Part Number System
P409 Q M 473 M250 AH470
Capacitor
Class Series
Lead Spacing
(mm) Size Code Capacitance Code (pF)
Capacitance
Tolerance
Rated Voltage
(VAC) Packaging Resistance(Ω)
P= Metallized
Paper
RC Snubber
Q = 15.2
C = 20.3
E = 25.4
See
Dimension
Table
First two digits represent
signicantgures.Third
digitspeciesnumberof
zeros.
M = ±20%
250 = 250
See Ordering
Options Table
Hplusrsttwodigits
representsignicant
gures.Thirddigit
speciesnumberof
zeros.
Click image above for interactive 3D content
Open PDF in Adobe Reader for full functionality
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com F3025_PMR209 • 5/15/2015 2
Film Capacitors
AC Line EMI Suppression and RC Networks – PMR209 Series Metallized Impregnated Paper, Class X2, 250 VAC
Ordering Options Table
Lead
Spacing
Nominal
(mm)
Type of Leads and Packaging Lead Length
(mm)
KEMET
Lead and
Packaging
Code
Legacy
Lead and
Packaging
Code
15.2
Standard Lead and Packaging Options
6+0/-1
C
R06
30+5/-0
A
R30
H0=18.5+/-0.5
L
R19T0
Other Lead and Packaging Options
H0=18.5+/-0.5
P
R19T1
20.3
Standard Lead and Packaging Options
6+0/-1
C
R06
30+5/-0
A
R30
H0=18.5+/-0.5
L
R19T0
Other Lead and Packaging Options
H0=18.5+/-0.5
P
R19T1
25.4
Standard Lead and Packaging Options
6+0/-1
C
R06
30+5/-0
A
R30
Dimensions – Millimeters
L B
FRONT VIEW SIDE VIEW
H
LL
p
d
Size Code
p
B
H
L
d
Nominal Tolerance Nominal Tolerance Nominal Tolerance Nominal Tolerance Nominal Tolerance
QM
15.2
+/-0.4
7.3
Maximum
13.0
Maximum
18.5
Maximum
0.8
+/-0.05
CE
20.3
+/-0.4
7.6
Maximum
14.0
Maximum
24.0
Maximum
0.8
+/-0.05
CP
20.3
+/-0.4
11.3
Maximum
16.5
Maximum
24.0
Maximum
0.8
+/-0.05
EJ
25.4
+/-0.4
12.1
Maximum
19.0
Maximum
30.5
Maximum
1.0
+/-0.05
EL
25.4
+/-0.4
15.3
Maximum
22.0
Maximum
30.5
Maximum
1.0
+/-0.05
Note: See Ordering Options Table for lead length (LL) options.
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com F3025_PMR209 • 5/15/2015 3
Film Capacitors
AC Line EMI Suppression and RC Networks – PMR209 Series Metallized Impregnated Paper, Class X2, 250 VAC
Performance Characteristics
Rated Voltage 250 VAC 50/60 Hz
Capacitance Range 0.047 – 0.47 µF
Capacitance Tolerance ±20%
Resistance Range 22–470Ω
Resistance Tolerance ±30%
Temperature Range -40°Cto+85°C
Climatic Category 40/085/56/B
Approvals ENEC, UL, cUL
Peak Pulse Voltage 1,000 V
Series Resistance
Theseriesresistanceisdenedat1kHzforRC≥50µsandat100
kHz for RC < 50 µs
Insulation Resistance
Minimum Values Between Terminals
C≤0.33µF ≥3,000MΩ
C > 0.33 µF ≥1,000MΩ•µF
Pulse Current
Maximum 12 A repetitive. Maximum 20 A peak for occasional
transients.
Test Voltage Between Terminals
The 100% screening factory test is carried out at 1,800 VDC. The
voltage level is selected to meet the requirements in applicable
equipment standards. All electrical characteristics are checked after
the test.
In DC Applications Recommendedvoltage≤630VDC
Power Ratings
The average losses may reach 0.5 W provided the surface
temperaturedoesnotexceed+85°C.Formaximumpermittedpower
dissipation vs. temperature, see Derating Curves.
Derating Curves
Maximum Allowable Power Dissipation vs. Ambient Temperature and
Case Sizes.
ºC
Curve Dimension B (mm)
1
7.3
2
7.6
3
11.3
4
15.3
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com F3025_PMR209 • 5/15/2015 4
Film Capacitors
AC Line EMI Suppression and RC Networks – PMR209 Series Metallized Impregnated Paper, Class X2, 250 VAC
Environmental Test Data
Test IEC Publication Procedure
Endurance IEC 60384-14 1.25 x VR VAC 50 Hz, once every hour increased to 1,000 VAC for 0.1
second, 1,000 hours at upper rated temperature.
Vibration IEC 60068–2–6 Test Fc 3 directions at 2 hours each, 10 – 500 Hz at 0.75 mm or 98 m/s2
Bump IEC 60068–2–29 Test Eb 4,000 bumps at 390 m/s2
Change of Temperature IEC 60068-2-14 Test Na Upper and lower rated temperature 5 cycles
Active Flammability IEC 60384–14 VR+20surgepulsesat2.5kV(pulseevery5seconds)
Passive Flammability IEC 60384–14 IEC60384–1,IEC60695–11–5Needle-ametest
Damp Heat Steady State IEC 60068–2–78 Test Cab +40°Cand93%RH,56days
Approvals
Certication Body
Mark
Specication
File Number
Intertek Semko AB EN/IEC 60384-14 SE/0140–28C
UL UL 60384-14 CAN/
CSA-E60384-14-09 E73869
Environmental Compliance
All KEMET EMI capacitors are RoHS Compliant.
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com F3025_PMR209 • 5/15/2015 5
Film Capacitors
AC Line EMI Suppression and RC Networks – PMR209 Series Metallized Impregnated Paper, Class X2, 250 VAC
Table 1 – Ratings & Part Number Reference
Lead
Spacing (p)
Capacitance
Value (µF)
Resistance
(Ω)
Maximum Dimensions in mm New KEMET
Part Number Legacy Part Number
B H L
15.2 0.047 47 7.3 13 18.5 P409QM473M250(1)H470 PMR209MB5470M047(1)
15.2 0.047 100 7. 3 13 18.5 P409QM473M250(1)H101 PMR209MB5470M100(1)
20.3 0.1 22 7.6 14 24 P409CE104M250(1)H220 PMR209MC6100M022(1)
20.3 0.1 33 7.6 14 24 P409CE104M250(1)H330 PMR209MC6100M033(1)
20.3 0.1 47 7.6 14 24 P409CE104M250(1)H470 PMR209MC6100M047(1)
20.3 0.1 68 7.6 14 24 P409CE104M250(1)H680 PMR209MC6100M068(1)
20.3 0.1 100 7.6 14 24 P409CE104M250(1)H101 PMR209MC6100M100(1)
20.3 0.1 150 11.3 16.5 24 P409CP104M250(1)H151 PMR209MC6100M150(1)
20.3 0.1 220 11.3 16.5 24 P409CP104M250(1)H221 PMR209MC6100M220(1)
20.3 0.1 330 11.3 16.5 24 P409CP104M250(1)H331 PMR209MC6100M330(1)
20.3 0.1 470 11.3 16.5 24 P409CP104M250(1)H471 PMR209MC6100M470(1)
20.3 0.22 22 11.3 16.5 24 P409CP224M250(1)H220 PMR209MC6220M022(1)
20.3 0.22 33 11.3 16.5 24 P409CP224M250(1)H330 PMR209MC6220M033(1)
20.3 0.22 47 11.3 16.5 24 P409CP224M250(1)H470 PMR209MC6220M047(1)
20.3 0.22 68 11.3 16.5 24 P409CP224M250(1)H680 PMR209MC6220M068(1)
20.3 0.22 100 11.3 16.5 24 P409CP224M250(1)H101 PMR209MC6220M100(1)
20.3 0.22 150 11.3 16.5 24 P409CP224M250(1)H151 PMR209MC6220M150(1)
20.3 0.22 220 11.3 16.5 24 P409CP224M250(1)H221 PMR209MC6220M220(1)
25.4 0.22 330 12.1 19 30.5 P409EJ224M250(1)H331 PMR209ME6220M330(1)
25.4 0.22 470 15.3 22 30.5 P409EL224M250(1)H471 PMR209ME6220M470(1)
25.4 0.47 33 15.3 22 30.5 P409EL474M250(1)H330 PMR209ME6470M033(1)
25.4 0.47 47 15.3 22 30.5 P409EL474M250(1)H470 PMR209ME6470M047(1)
25.4 0.47 68 15.3 22 30.5 P409EL474M250(1)H680 PMR209ME6470M068(1)
25.4 0.47 100 15.3 22 30.5 P409EL474M250(1)H101 PMR209ME6470M100(1)
25.4 0.47 150 15.3 22 30.5 P409EL474M250(1)H151 PMR209ME6470M150(1)
25.4 0.47 220 15.3 22 30.5 P409EL474M250(1)H221 PMR209ME6470M220(1)
Lead
Spacing (p)
Capacitance
Value (µF) Resistance Ω B (mm) H (mm) L (mm) New KEMET
Part Number Legacy Part Number
(1) Insert lead and packaging code. See Ordering Options Table for available options.
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com F3025_PMR209 • 5/15/2015 6
Film Capacitors
AC Line EMI Suppression and RC Networks – PMR209 Series Metallized Impregnated Paper, Class X2, 250 VAC
Manual Soldering Recommendations
Following is the recommendation for manual
soldering with a soldering iron.
The soldering iron tip temperature should be set
at350°C(+10°Cmaximum)withthesoldering
duration not to exceed more than 3 seconds.
Recommended Soldering Temperature
0
50
100
150
200
250
300
350
400
012345678
Soldering time (sec)
Soldering iron bit temperature (deg C)
Soldering Process
The implementation of the RoHS directive has resulted in the selection of SnAgCu (SAC) alloys or SnCu alloys as primary solder. This has
increased the liquidus temperature from that of 183ºC for SnPb eutectic alloy to 217 – 221ºC for the new alloys. As a result, the heat stress
to the components, even in wave soldering, has increased considerably due to higher pre-heat and wave temperatures. Polypropylene
capacitors are especially sensitive to heat (the melting point of polypropylene is 160 – 170ºC). Wave soldering can be destructive, especially
for mechanically small polypropylene capacitors (with lead spacing of 5 mm to 15 mm), and great care has to be taken during soldering. The
recommendedsolderprolesfromKEMETshouldbeused.PleaseconsultKEMETwithanyquestions.Ingeneral,thewavesolderingcurve
from IEC Publication 61760-1 Edition 2 serves as a solid guideline for successful soldering. Please see Figure 1.
Reowsolderingisnotrecommendedforthrough-holelmcapacitors.Exposingcapacitorstoasolderingproleinexcessoftheabovethe
recommended limits may result to degradation or permanent damage to the capacitors.
Do not place the polypropylene capacitor through an adhesive curing oven to cure resin for surface mount components. Insert through-
holepartsafterthecuringofsurfacemountparts.ConsultKEMETtodiscusstheactualtemperatureproleintheoven,ifthrough-hole
components must pass through the adhesive curing process. A maximum two soldering cycles is recommended. Please allow time for the
capacitor surface temperature to return to a normal temperature before the second soldering cycle.
Wave Soldering Recommendations
0
50
100
150
200
250
300
0
40
80
120
160
200
240
Temperature (°C)
Time (s)
ca 2°C/s
ca 3.5°C/s typical
ca 5°C/s
Cooling
2+3s max
115°C max
T
preh eat
ΔT <150°C
100°C
Preheating
Typical
First wave
Second wave
260°C
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com F3025_PMR209 • 5/15/2015 7
Film Capacitors
AC Line EMI Suppression and RC Networks – PMR209 Series Metallized Impregnated Paper, Class X2, 250 VAC
Soldering Process cont'd
Wave Soldering Recommendations cont'd
1. The table indicates the maximum set-up temperature of the soldering process
Figure 1
Dielectric
Film Material
Maximum Preheat
Temperature
Maximum
Peak Soldering
Temperature
Capacitor
Pitch
≤10mm
Capacitor
Pitch
= 15 mm
Capacitor
Pitch
> 15 mm
Capacitor
Pitch
≤15mm
Capacitor
Pitch
> 15 mm
Polyester 130°C 130°C 130°C 270°C 270°C
Polypropylene 100°C 110°C 130°C 260°C 270°C
Paper 130°C 130°C 140°C 270°C 270°C
Polyphenylene
Sulphide 150°C 150°C 160°C 270°C 270°C
2. The maximum temperature measured inside the capacitor:
Set the temperature so that inside the element the maximum temperature is below the limit:
Dielectric Film Material Maximum temperature
measured inside the element
Polyester 160°C
Polypropylene 110°C
Paper 160°C
Polyphenylene
sulphide
160°C
Temperature monitored inside the capacitor.
Selective Soldering Recommendations
Selectivedipsolderingisavariationofreowsoldering.Inthismethod,theprintedcircuitboardwiththrough-holecomponentstobe
solderedispreheatedandtransportedoverthesolderbathasinnormalowsolderingwithouttouchingthesolder.Whentheboardis
over the bath, it is stopped and pre-designed solder pots are lifted from the bath with molten solder only at the places of the selected
components, and pressed against the lower surface of the board to solder the components.
Thetemperatureproleforselectivesolderingissimilartothedoublewaveowsolderingoutlinedinthisdocument,however, instead
of two baths, there is only one bath with a time from 3 to 10 seconds. In selective soldering, the risk of overheating is greater than
indoublewaveowsoldering,andgreatcaremustbetakensothatthepartsarenotoverheated.
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com F3025_PMR209 • 5/15/2015 8
Film Capacitors
AC Line EMI Suppression and RC Networks – PMR209 Series Metallized Impregnated Paper, Class X2, 250 VAC
Construction
Detailed Cross Section
Self-Extinguishing
Resin
Self-Extinguishing
Resin
Leads
Metal Contact
Layer
Metal Contact
Layer
Margin
Metallized Impregnated Paper
(First Layer)
Margin
Margin
Metallized Impregnated Paper
(Second Layer)
Resistor (Not Shown)
Integrated into Metallization
Single-sided
Metallized
Polypropylene
Film
FILM WINDING SCHEME OPTIONS
1 Section
Single-sided
Metallized
Polypropylene
Film
Single-sided
Metallized
Polypropylene
Film
Single-sided
Metallized
Polypropylene
Film
Single-sided Metallized Polypropylene Film
2 Sections
3 Sections 4 Sections
Single-sided
Metallized
Polypropylene
Film
Polypropylene
Film Dielectric
1 Section
Double-sided Metallized Polyester Film
3 Sections
Double-sided
Metallized
Polyester Carrier
Film
Polypropylene
Film Dielectric
Double-sided
Metallized
Polyester Carrier
Film
2 Sections
Polypropylene
Film Dielectric
Double-sided
Metallized
Polyester Carrier
Film
Single-sided
Metallized
Polypropylene
Film
4 Sections
Polypropylene
Film Dielectric
Double-sided
Metallized
Polyester Carrier
Film
Polypropylene
Film Dielectric
1 Section
Polypropylene Film/Foil
2 Sections
Metal Foil Metal Foil
Single-sided
Metallized
Polypropylene
Film
Polypropylene
Film Dielectric
Metallized Polyphenylene
Sulfide Film with
Vacuum-Evaporated
Aluminum Electrodes
1 Section
Metallized Polyphenylene
Sulfide Film (SMR)
Metallized
Impregnated
Paper
1 Section
Metallized Impregnated Paper
Single-sided
Metallized
Polyester
Film
1 Section
Single-sided Metallized Polyester Film
Polypropylene
Film Dielectric
1 Section
AXIAL - Polypropylene Film/Foil
2 Sections
Metal Foil
Single-sided
Metallized
Polypropylene
Film
Polypropylene
Film Dielectric
Metal Foil
Single-sided
Metallized
Polypropylene
Film
2 Sections
Polypropylene
Film Dielectric
Double-sided
Metallized
Polyester Carrier
Film
Single-sided
Metallized
Polypropylene
Film
1 Section
AXIAL - Single-sided Metallized
Polypropylene Film
Single-sided
Metallized
Polyester
Film
1 Section
AXIAL - Single-sided Metallized
Polyester Film AXIAL - Double-sided
Metallized Polyester Film
Winding Scheme
L
H
LL
d
B
p
R
C
Series Connection
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com F3025_PMR209 • 5/15/2015 9
Film Capacitors
AC Line EMI Suppression and RC Networks – PMR209 Series Metallized Impregnated Paper, Class X2, 250 VAC
Marking
BACKFRONT
TOP
Capacitance Resistance,
Safety Class
Voltage
Temperature
Range
Series
IEC Climatic
Category Manufacturing
Date Code Circuit
Diagram
RC Unit
Packaging Quantities
Size
Code
Lead
Spacing
(mm)
Thickness
(mm)
Height
(mm)
Length
(mm)
Bulk
Short
Leads
Bulk
Long
Leads
Standard
Reel
ø 360 mm
QM
15.2
7.3
13.0
18.5
500
100
600
CE
20.3
7.6
14.0
24.0
250
1500
250
CP
20.3
11.3
16.5
24.0
150
1000
180
EJ
25.4
12.1
19.0
30.5
100
800
EL
25.4
15.3
22.0
30.5
75
600
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com F3025_PMR209 • 5/15/2015 10
Film Capacitors
AC Line EMI Suppression and RC Networks – PMR209 Series Metallized Impregnated Paper, Class X2, 250 VAC
Lead Taping & Packaging (IEC 60286–2)
Taping Speci cation
Dimensions in mm
Standard IEC 60286–2
Lead spacing +6/-0.1 F
Formed
7.5
10.2 15.2 20.3 22.5 F
Carrier tape width +/-0.5 W18 18 18 18 18 18+1/-0.5
Hold-down tape width +/-0.3 W
0
912 12 12 12
Position of sprocket hole +/-0.5 W
1
99999 9+0.75/-0.5
Distance between tapes Maximum W
2
33333 3
Sprocket hole diameter +/-0.2 D
0
44444 4
Feed hole lead spacing +/-0.3 P
0
(1) 12.7(4) 12.7 12.7 12.7 12.7 12.7
Distance lead – feed hole +/-0.7 P
1
3.75 7.6 5.1 8.9 5.3 P1
Deviation tape – plane Maximum ∆p 1.3 1.3 1.3 1.3 1.3 1.3
Lateral deviation Maximum ∆h 22222 2
Total thickness +/-0.2 t0.7 0.7 0.7 0.7 0.9MAX 0.9MAX
Sprocket hole/cap body Nominal H
0
(2) 18+2/-0 18+2/-0 18+2/-0 18+2/-0 18.5+/-0.5 18+2/-0
Sprocket hole/top of cap body Maximum H
1
(3) 35 35 35 35 58 58MAX
(1) Maximum cumulative feed hole error, 1 mm per 20 parts.
(2) 16.5 mm available on request.
(3) Depending on case size.
(4) 15 mm available on request.
Lead Spacing 10.2 – 15.2 mm
Lead Spacing 20.3 – 22.5 mm
Formed Leads from 10.2 to 7.5 mm
0
0
0
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com F3025_PMR209 • 5/15/2015 11
Film Capacitors
AC Line EMI Suppression and RC Networks – PMR209 Series Metallized Impregnated Paper, Class X2, 250 VAC
H
T
W
Lead Taping & Packaging (IEC 60286–2) cont'd
Ammo Speci cations
Series Dimensions (mm)
H
W
T
R4x,R4x+R,R7x,RSB
360 340 59
F5A, F5B, F5D
F6xx, F8xx
PHExxx, PMExxx, PMRxxx
330
330
50
Reel Speci cations
Series
Dimensions (mm)
D
H
W
R4x,R4x+R,R7x,RSB
355
500
30
25 55 (Max)
F5A, F5B, F5D
F6xx, F8xx
PHExxx, PMExxx, PMRxxx
360
500
30 46 (Max)
Manufacturing Date Code (IEC–60062)
Y = Year, Z = Month
Year
Code
Month
Code
2000
M
January
1
2001
N
February
2
2002
P
March
3
2003
R
April
4
2004
S
May
5
2005
T
June
6
2006
U
July
7
2007
V
August
8
2008
W
September
9
2009
X
October
O
2010
A
November
N
2011
B
December
D
2012
C
2013
D
2014
E
2015
F
2016
H
2017
J
2018
K
2019
L
2020
M
D
W
H
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com F3025_PMR209 • 5/15/2015 12
Film Capacitors
AC Line EMI Suppression and RC Networks – PMR209 Series Metallized Impregnated Paper, Class X2, 250 VAC
KEMET Corporation
World Headquarters
2835 KEMET Way
Simpsonville, SC 29681
Mailing Address:
P.O. Box 5928
Greenville, SC 29606
www.kemet.com
Tel: 864-963-6300
Fax: 864-963-6521
Corporate Of ces
Fort Lauderdale, FL
Tel: 954-766-2800
North America
Southeast
Lake Mary, FL
Tel: 407-855-8886
Northeast
Wilmington, MA
Tel: 978-658-1663
Central
Novi, MI
Tel: 248-306-9353
West
Milpitas, CA
Tel: 408-433-9950
Mexico
Guadalajara, Jalisco
Tel: 52-33-3123-2141
Europe
Southern Europe
Sasso Marconi, Italy
Tel: 39-051-939111
Skopje, Macedonia
Tel: 389-2-55-14-623
Central Europe
Landsberg, Germany
Tel: 49-8191-3350800
Kamen, Germany
Tel: 49-2307-438110
Northern Europe
Harlow, United Kingdom
Tel: 44-1279-460122
Espoo, Finland
Tel: 358-9-5406-5000
Asia
Northeast Asia
Hong Kong
Tel: 852-2305-1168
Shenzhen, China
Tel: 86-755-2518-1306
Beijing, China
Tel: 86-10-5877-1075
Shanghai, China
Tel: 86-21-6447-0707
Seoul, South Korea
Tel: 82-2-6294-0550
Taipei, Taiwan
Tel: 886-2-27528585
Southeast Asia
Singapore
Tel: 65-6701-8033
Penang, Malaysia
Tel: 60-4-6430200
Bangalore, India
Tel: 91-806-53-76817
Note: KEMET reserves the right to modify minor details of internal and external construction at any time in the interest of product improvement. KEMET does not
assume any responsibility for infringement that might result from the use of KEMET Capacitors in potential circuit designs. KEMET is a registered trademark of
KEMET Electronics Corporation.
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com F3025_PMR209 • 5/15/2015 13
Film Capacitors
AC Line EMI Suppression and RC Networks – PMR209 Series Metallized Impregnated Paper, Class X2, 250 VAC
Disclaimer
Allproductspecications,statements,informationanddata(collectively,the“Information”)inthisdatasheetaresubjecttochange.Thecustomerisresponsibleforcheckingand
verifying the extent to which the Information contained in this publication is applicable to an order at the time the order is placed.
All Information given herein is believed to be accurate and reliable, but it is presented without guarantee, warranty, or responsibility of any kind, expressed or implied.
StatementsofsuitabilityforcertainapplicationsarebasedonKEMETElectronicsCorporation’s(“KEMET”)knowledgeoftypicaloperatingconditionsforsuchapplications,butare
notintendedtoconstitute–andKEMETspecicallydisclaims–anywarrantyconcerningsuitabilityforaspeciccustomerapplicationoruse.TheInformationisintendedforuseonly
by customers who have the requisite experience and capability to determine the correct products for their application. Any technical advice inferred from this Information or otherwise
provided by KEMET with reference to the use of KEMET’s products is given gratis, and KEMET assumes no obligation or liability for the advice given or results obtained.
Although KEMET designs and manufactures its products to the most stringent quality and safety standards, given the current state of the art, isolated component failures may still
occur. Accordingly, customer applications which require a high degree of reliability or safety should employ suitable designs or other safeguards (such as installation of protective
circuitry or redundancies) in order to ensure that the failure of an electrical component does not result in a risk of personal injury or property damage.
Although all product–related warnings, cautions and notes must be observed, the customer should not assume that all safety measures are indicted or that other measures may not
be required.