https://www.phoenixcontact.com/us/products/3048836 Four-conductor universal terminal block-UT 4-QUATTRO HV BU-3048836 Please be informed that the data shown in this PDF Document is generated from our Online Catalog. Please find the complete data in the user's documentation. Our General Terms of Use for Downloads are valid (http://phoenixcontact.com/download) Four-conductor universal terminal block, nom. voltage: 1000 V, nominal current: 32 A, connection method: Screw connection, number of connections: 4, cross section: 0.14 mm-6 mm, AWG:26-10, width: 6.2 mm, color: blue, mounting type: NS 35/7,5, NS 35/15 Your advantages These versions can be used as compact potential distributors Key Commercial Data Packing unit 1 pc Minimum order quantity 50 pc GTIN GTIN 4046356517577 Weight per Piece (excluding packing) 18.000 g Custom tariff number 85369010 Country of origin China Technical data General Number of levels 1 Number of connections 4 Potentials 1 Nominal cross section 4 mm Color blue Insulating material PA 01/16/2021Page1/24 https://www.phoenixcontact.com/us/products/3048836 Four-conductor universal terminal block-UT 4-QUATTRO HV BU-3048836 Technical data General Flammability rating according to UL 94 V0 Rated surge voltage 6 kV Degree of pollution 3 Overvoltage category III Insulating material group I Maximum power dissipation for nominal condition 1.02 W Maximum load current 37 A (In the case of a 6 mm conductor cross section, the maximum load current must not be exceeded by the total current of all connected conductors) Nominal current IN 32 A Nominal voltage UN 1000 V Open side panel Yes Ambient temperature (operation) -60 C ... 105 C (max. short-term operating temperature130C) Ambient temperature (storage/transport) -25 C ... 60 C (for a short time, not exceeding 24h, -60C to +70C) Permissible humidity (storage/transport) 30 % ... 70 % Ambient temperature (assembly) -5 C ... 70 C Ambient temperature (actuation) -5 C ... 70 C Shock protection test specification IEC 60529:2001-02 Back of the hand protection guaranteed Finger protection guaranteed Result of surge voltage test Test passed Surge voltage test setpoint 9.6 kV Result of power-frequency withstand voltage test Test passed Power frequency withstand voltage setpoint 2.2 kV Result of the test for mechanical stability of terminal points (5 x conductor connection) Test passed Result of bending test Test passed Bending test rotation speed 10 (+/- 2) rpm Bending test turns 135 Bending test conductor cross section/weight 0.14 mm / 0.2 kg 4 mm / 0.9 kg 6 mm / 1.4 kg Tensile test result Test passed Conductor cross section tensile test 0.14 mm Tractive force setpoint 10 N Conductor cross section tensile test 4 mm Tractive force setpoint 60 N 01/16/2021Page2/24 https://www.phoenixcontact.com/us/products/3048836 Four-conductor universal terminal block-UT 4-QUATTRO HV BU-3048836 Technical data General Conductor cross section tensile test 6 mm Tractive force setpoint 80 N Result of tight fit on support Test passed Tight fit on carrier NS 32/NS 35 Result of voltage-drop test Test passed Requirements, voltage drop U1 3.2 mV; U2 1.5 x U1 Result of temperature-rise test Test passed Requirement temperature-rise test Increase in temperature 45 K Short circuit stability result Test passed Conductor cross section short circuit testing 4 mm Short-time current 0.48 kA Conductor cross section short circuit testing 6 mm Short-time current 0.72 kA Result of thermal test Test passed Proof of thermal characteristics (needle flame) effective duration 30 s Test specification, oscillation, broadband noise DIN EN 50155 (VDE 0115-200):2018-05 Test spectrum Service life test category 2, bogie-mounted Test frequency f1 = 5 Hz to f2 = 250 Hz ASD level 6.12 (m/s ) /Hz Acceleration 3.12 g Test duration per axis 5h Test directions X-, Y- and Z-axis Shock form Half-sine Acceleration 30g Shock duration 18 ms Number of shocks per direction 3 Test directions X-, Y- and Z-axis (pos. and neg.) Relative insulation material temperature index (Elec., UL 746 B) 130 C 2 2 Temperature index of insulation material (DIN EN 60216-1 (VDE 0304-21)) 130 C Static insulating material application in cold -60 C Surface flammability NFPA 130 (ASTM E 162) passed Specific optical density of smoke NFPA 130 (ASTM E 662) passed Calorimetric heat release NFPA 130 (ASTM E 1354) 28 MJ/kg Smoke gas toxicity NFPA 130 (SMP 800C) passed Fire protection for rail vehicles (DIN EN 45545-2) R22 HL 1 - HL 3 Fire protection for rail vehicles (DIN EN 45545-2) R23 HL 1 - HL 3 01/16/2021Page3/24 https://www.phoenixcontact.com/us/products/3048836 Four-conductor universal terminal block-UT 4-QUATTRO HV BU-3048836 Technical data General Fire protection for rail vehicles (DIN EN 45545-2) R24 HL 1 - HL 3 Fire protection for rail vehicles (DIN EN 45545-2) R26 HL 1 - HL 3 Dimensions Width 6.2 mm End cover width 2.2 mm Length 65.4 mm Height NS 35/7,5 50 mm Height NS 35/15 57.5 mm Connection data Connection 1 level Connection method Screw connection Screw thread M3 Stripping length 9 mm Tightening torque, min 0.6 Nm Tightening torque max 0.8 Nm Connection in acc. with standard IEC60947-7-1 Conductor cross section solid min. 0.14 mm Conductor cross section solid max. 6 mm Conductor cross section AWG min. 26 Conductor cross section AWG max. 10 Conductor cross section flexible min. 0.14 mm Conductor cross section flexible max. 6 mm Min. AWG conductor cross section, flexible 26 Max. AWG conductor cross section, flexible 10 Conductor cross section flexible, with ferrule without plastic sleeve min. 0.14 mm Conductor cross section flexible, with ferrule without plastic sleeve max. 4 mm Conductor cross section flexible, with ferrule with plastic sleeve min. 0.14 mm Conductor cross section flexible, with ferrule with plastic sleeve max. 4 mm 2 conductors with same cross section, solid min. 0.14 mm 2 conductors with same cross section, solid max. 1.5 mm 2 conductors with same cross section, stranded min. 0.14 mm 2 conductors with same cross section, stranded max. 1.5 mm Two conductors with the same cross section, flexible, with TWIN ferrules, with plastic sleeve, minimum 0.5 mm Two conductors with the same cross section, flexible, with TWIN ferrules, with plastic sleeve, maximum 1 mm 01/16/2021Page4/24 https://www.phoenixcontact.com/us/products/3048836 Four-conductor universal terminal block-UT 4-QUATTRO HV BU-3048836 Technical data Connection data Two conductors with the same cross section stranded, with ferrule and without plastic sleeve, minimum 0.14 mm Two conductors with the same cross section stranded, with ferrule and without plastic sleeve, maximum 1.5 mm Internal cylindrical gage A4 Standards and Regulations Connection in acc. with standard IEC60947-7-1 Flammability rating according to UL 94 V0 Environmental Product Compliance REACh SVHC Lead 7439-92-1 China RoHS Environmentally Friendly Use Period = 50 years For details about hazardous substances go to tab "Downloads", Category "Manufacturer's declaration" Drawings Circuit diagram Classifications eCl@ss eCl@ss 10.0.1 27141120 eCl@ss 11.0 27141120 eCl@ss 4.0 27141100 eCl@ss 4.1 27141100 eCl@ss 5.0 27141100 eCl@ss 5.1 27141100 eCl@ss 6.0 27141100 eCl@ss 7.0 27141120 eCl@ss 8.0 27141120 eCl@ss 9.0 27141120 ETIM ETIM 4.0 EC000897 ETIM 5.0 EC000897 01/16/2021Page5/24 https://www.phoenixcontact.com/us/products/3048836 Four-conductor universal terminal block-UT 4-QUATTRO HV BU-3048836 Classifications ETIM ETIM 6.0 EC000897 ETIM 7.0 EC000897 UNSPSC UNSPSC 6.01 30211811 UNSPSC 7.0901 39121410 UNSPSC 11 39121410 UNSPSC 12.01 39121410 UNSPSC 13.2 39121410 UNSPSC 18.0 39121410 UNSPSC 19.0 39121410 UNSPSC 20.0 39121410 UNSPSC 21.0 39121410 Approvals Approvals Approvals IECEE CB Scheme / VDE Zeichengenehmigung / EAC Ex Approvals IECEx / ATEX / EAC Ex / NEPSI Approval details IECEE CB Scheme http://www.iecee.org/ Nominal voltage UN 1000 V mm/AWG/kcmil 4 DE1-62014 01/16/2021Page6/24 https://www.phoenixcontact.com/us/products/3048836 Four-conductor universal terminal block-UT 4-QUATTRO HV BU-3048836 Approvals VDE Zeichengenehmigung http://www2.vde.com/de/Institut/Online-Service/ VDE-gepruefteProdukte/Seiten/Online-Suche.aspx Nominal voltage UN 1000 V Nominal current IN 32 A mm/AWG/kcmil 0.14-6 EAC 40040772 RU CDE.A*30.B.01742 Accessories Accessories DIN rail DIN rail perforated-NS 35/ 7,5 PERF 2000MM-0801733 DIN rail perforated, Standard profile, width:35 mm, height:7.5 mm, acc. to EN 60715, material:Steel, galvanized, passivated with a thick layer, length:2000 mm, color:silver DIN rail, unperforated-NS 35/ 7,5 UNPERF 2000MM-0801681 DIN rail, unperforated, Standard profile, width:35 mm, height:7.5 mm, acc. to EN 60715, material:Steel, galvanized, passivated with a thick layer, length:2000 mm, color:silver DIN rail perforated-NS 35/ 7,5 WH PERF 2000MM-1204119 DIN rail perforated, Standard profile, width:35 mm, height:7.5 mm, acc. to EN 60715, material:Steel, Galvanized, white passivated, length:2000 mm, color:silver 01/16/2021Page7/24 https://www.phoenixcontact.com/us/products/3048836 Four-conductor universal terminal block-UT 4-QUATTRO HV BU-3048836 Accessories DIN rail, unperforated-NS 35/ 7,5 WH UNPERF 2000MM-1204122 DIN rail, unperforated, Standard profile, width:35 mm, height:7.5 mm, acc. to EN 60715, material:Steel, Galvanized, white passivated, length:2000 mm, color:silver DIN rail, unperforated-NS 35/ 7,5 AL UNPERF 2000MM-0801704 DIN rail, unperforated, Standard profile, width:35 mm, height:7.5 mm, acc. to EN 60715, material:Aluminum, uncoated, length:2000 mm, color:silver DIN rail perforated-NS 35/ 7,5 ZN PERF 2000MM-1206421 DIN rail perforated, Standard profile, width:35 mm, height:7.5 mm, acc. to EN 60715, material:Steel, galvanized, length:2000 mm, color:silver DIN rail, unperforated-NS 35/ 7,5 ZN UNPERF 2000MM-1206434 DIN rail, unperforated, Standard profile, width:35 mm, height:7.5 mm, acc. to EN 60715, material:Steel, galvanized, length:2000 mm, color:silver DIN rail, unperforated-NS 35/ 7,5 CU UNPERF 2000MM-0801762 DIN rail, unperforated, Standard profile, width:35 mm, height:7.5 mm, acc. to EN 60715, material:Copper, uncoated, length:2000 mm, color:copper-colored 01/16/2021Page8/24 https://www.phoenixcontact.com/us/products/3048836 Four-conductor universal terminal block-UT 4-QUATTRO HV BU-3048836 Accessories End cap-NS 35/ 7,5 CAP-1206560 DIN rail end piece, for DIN rail NS 35/7.5 DIN rail perforated-NS 35/15 PERF 2000MM-1201730 DIN rail perforated, Standard profile, width:35 mm, height:15 mm, similar to EN 60715, material:Steel, galvanized, passivated with a thick layer, length:2000 mm, color:silver DIN rail, unperforated-NS 35/15 UNPERF 2000MM-1201714 DIN rail, unperforated, Standard profile, width:35 mm, height:15 mm, similar to EN 60715, material:Steel, galvanized, passivated with a thick layer, length:2000 mm, color:silver DIN rail perforated-NS 35/15 WH PERF 2000MM-0806602 DIN rail perforated, Standard profile, width:35 mm, height:15 mm, similar to EN 60715, material:Steel, Galvanized, white passivated, length:2000 mm, color:silver DIN rail, unperforated-NS 35/15 WH UNPERF 2000MM-1204135 DIN rail, unperforated, Standard profile, width:35 mm, height:15 mm, similar to EN 60715, material:Steel, Galvanized, white passivated, length:2000 mm, color:silver 01/16/2021Page9/24 https://www.phoenixcontact.com/us/products/3048836 Four-conductor universal terminal block-UT 4-QUATTRO HV BU-3048836 Accessories DIN rail, unperforated-NS 35/15 AL UNPERF 2000MM-1201756 DIN rail, unperforated, Standard profile, width:35 mm, height:15 mm, similar to EN 60715, material:Aluminum, uncoated, length:2000 mm, color:silver DIN rail perforated-NS 35/15 ZN PERF 2000MM-1206599 DIN rail perforated, Standard profile, width:35 mm, height:15 mm, similar to EN 60715, material:Steel, galvanized, length:2000 mm, color:silver DIN rail, unperforated-NS 35/15 ZN UNPERF 2000MM-1206586 DIN rail, unperforated, Standard profile, width:35 mm, height:15 mm, similar to EN 60715, material:Steel, galvanized, length:2000 mm, color:silver DIN rail, unperforated-NS 35/15 CU UNPERF 2000MM-1201895 DIN rail, unperforated, Standard profile, width:35 mm, height:15 mm, similar to EN 60715, material:Copper, uncoated, length:2000 mm, color:copper-colored End cap-NS 35/15 CAP-1206573 DIN rail end piece, for DIN rail NS 35/15 01/16/2021Page10/24 https://www.phoenixcontact.com/us/products/3048836 Four-conductor universal terminal block-UT 4-QUATTRO HV BU-3048836 Accessories DIN rail, unperforated-NS 35/15-2,3 UNPERF 2000MM-1201798 DIN rail, unperforated, Standard profile 2.3mm, width:35 mm, height:15 mm, acc. to EN 60715, material:Steel, galvanized, passivated with a thick layer, length:2000 mm, color:silver End block End clamp-CLIPFIX 35-3022218 Quick mounting end clamp for NS 35/7,5 DIN rail or NS 35/15 DIN rail, with marking option, width: 9.5 mm, color: gray End clamp-CLIPFIX 35-5-3022276 Quick mounting end clamp for NS 35/7,5 DIN rail or NS 35/15 DIN rail, with marking option, with parking option for FBS...5, FBS...6, KSS 5, KSS 6, width: 5.15 mm, color: gray End clamp-E/NS 35 N-0800886 End clamp, width: 9.5 mm, color: gray End cover 01/16/2021Page11/24 https://www.phoenixcontact.com/us/products/3048836 Four-conductor universal terminal block-UT 4-QUATTRO HV BU-3048836 Accessories End cover-D-UT 4-QUATTRO HV-3048852 End cover, length: 64.4 mm, width: 2.2 mm, height: 42.3 mm, color: gray Insulating sleeve Insulating sleeve-MPS-IH WH-0201663 Insulating sleeve, color: white Insulating sleeve-MPS-IH RD-0201676 Insulating sleeve, color: red Insulating sleeve-MPS-IH BU-0201689 Insulating sleeve, color: blue Insulating sleeve-MPS-IH YE-0201692 Insulating sleeve, color: yellow 01/16/2021Page12/24 https://www.phoenixcontact.com/us/products/3048836 Four-conductor universal terminal block-UT 4-QUATTRO HV BU-3048836 Accessories Insulating sleeve-MPS-IH GN-0201702 Insulating sleeve, color: green Insulating sleeve-MPS-IH GY-0201728 Insulating sleeve, color: gray Insulating sleeve-MPS-IH BK-0201731 Insulating sleeve, color: black Jumper Plug-in bridge-FBS 2-6-3030336 Plug-in bridge, pitch: 6.2 mm, width: 10.7 mm, number of positions: 2, color: red 01/16/2021Page13/24 https://www.phoenixcontact.com/us/products/3048836 Four-conductor universal terminal block-UT 4-QUATTRO HV BU-3048836 Accessories Plug-in bridge-FBS 3-6-3030242 Plug-in bridge, pitch: 6.2 mm, width: 16.9 mm, number of positions: 3, color: red Plug-in bridge-FBS 4-6-3030255 Plug-in bridge, pitch: 6.2 mm, width: 23.1 mm, number of positions: 4, color: red Plug-in bridge-FBS 5-6-3030349 Plug-in bridge, pitch: 6.2 mm, width: 29.3 mm, number of positions: 5, color: red Plug-in bridge-FBS 6-6-1008238 Plug-in bridge, One side not fully isolated, pitch: 6.2 mm, width: 35.5 mm, number of positions: 6, color: red Plug-in bridge-FBS 10-6-3030271 Plug-in bridge, pitch: 6.2 mm, width: 60.3 mm, number of positions: 10, color: red 01/16/2021Page14/24 https://www.phoenixcontact.com/us/products/3048836 Four-conductor universal terminal block-UT 4-QUATTRO HV BU-3048836 Accessories Plug-in bridge-FBS 20-6-3030365 Plug-in bridge, pitch: 6.2 mm, width: 122.3 mm, number of positions: 20, color: red Plug-in bridge-FBS 50-6-3032224 Plug-in bridge, pitch: 6.2 mm, width: 308.3 mm, number of positions: 50, color: red Plug-in bridge-FBSR 2-6-3033715 Plug-in bridge, pitch: 6.2 mm, number of positions: 2, color: red Plug-in bridge-FBSR 3-6-3001594 Plug-in bridge, pitch: 6.2 mm, number of positions: 3, color: red Plug-in bridge-FBSR 4-6-3001595 Plug-in bridge, pitch: 6.2 mm, number of positions: 4, color: red 01/16/2021Page15/24 https://www.phoenixcontact.com/us/products/3048836 Four-conductor universal terminal block-UT 4-QUATTRO HV BU-3048836 Accessories Plug-in bridge-FBSR 5-6-3001596 Plug-in bridge, pitch: 6.2 mm, number of positions: 5, color: red Plug-in bridge-FBSR 10-6-3033716 Plug-in bridge, pitch: 6.2 mm, number of positions: 10, color: red Plug-in bridge-FBS 2-6 BU-3036932 Plug-in bridge, pitch: 6.2 mm, width: 10.7 mm, number of positions: 2, color: blue Plug-in bridge-FBS 3-6 BU-3036945 Plug-in bridge, pitch: 6.2 mm, width: 16.9 mm, number of positions: 3, color: blue Plug-in bridge-FBS 4-6 BU-3036958 Plug-in bridge, pitch: 6.2 mm, width: 23.1 mm, number of positions: 4, color: blue 01/16/2021Page16/24 https://www.phoenixcontact.com/us/products/3048836 Four-conductor universal terminal block-UT 4-QUATTRO HV BU-3048836 Accessories Plug-in bridge-FBS 5-6 BU-3036961 Plug-in bridge, pitch: 6.2 mm, width: 29.3 mm, number of positions: 5, color: blue Plug-in bridge-FBS 10-6 BU-3032198 Plug-in bridge, pitch: 6.2 mm, width: 60.3 mm, number of positions: 10, color: blue Plug-in bridge-FBS 20-6 BU-3032208 Plug-in bridge, pitch: 6.2 mm, width: 122.3 mm, number of positions: 20, color: blue Plug-in bridge-FBS 50-6 BU-3032211 Plug-in bridge, pitch: 6.2 mm, width: 308.3 mm, number of positions: 50, color: blue Labeled terminal marker Zack marker strip-ZB 6 CUS-0824992 Zack marker strip, can be ordered: Strip, white, labeled according to customer specifications, mounting type: snap into tall marker groove, for terminal block width: 6.2 mm, lettering field size: 6.15 x 10.5 mm, Number of individual labels: 10 01/16/2021Page17/24 https://www.phoenixcontact.com/us/products/3048836 Four-conductor universal terminal block-UT 4-QUATTRO HV BU-3048836 Accessories Zack marker strip-ZB 6,LGS:FORTL.ZAHLEN-1051016 Zack marker strip, Strip, white, labeled, can be labeled with: CMS-P1-PLOTTER, printed horizontally: consecutive numbers 1 ... 10, 11 ... 20, etc. up to 491 ... 500, mounting type: snap into tall marker groove, for terminal block width: 6.2 mm, lettering field size: 6.15 x 10.5 mm, Number of individual labels: 10 Zack marker strip-ZB 6,QR:FORTL.ZAHLEN-1051029 Zack marker strip, Strip, white, labeled, can be labeled with: CMS-P1-PLOTTER, Printed vertically: consecutive numbers 1 ... 10, 11 ... 20, etc. up to 491 ... 500, mounting type: snap into tall marker groove, for terminal block width: 6.2 mm, lettering field size: 6.15 x 10.5 mm, Number of individual labels: 10 Zack marker strip-ZB 6,LGS:GLEICHE ZAHLEN-1051032 Zack marker strip, Strip, white, labeled, can be labeled with: CMS-P1-PLOTTER, printed horizontally: Identical numbers 1 or 2, etc. up to 100, mounting type: snap into tall marker groove, for terminal block width: 6.2 mm, lettering field size: 6.15 x 10.5 mm, Number of individual labels: 10 Marker for terminal blocks-ZB 6,LGS:L1-N,PE-1051414 Marker for terminal blocks, Strip, white, labeled, can be labeled with: CMS-P1-PLOTTER, horizontal: L1, L2, L3, N, PE, L1, L2, L3, N, PE, mounting type: snap into tall marker groove, for terminal block width: 6.2 mm, lettering field size: 6.15 x 10.5 mm, Number of individual labels: 10 Marker for terminal blocks-ZB 6,LGS:U-N-1051430 Marker for terminal blocks, Strip, white, labeled, can be labeled with: CMS-P1-PLOTTER, printed horizontally: U, V, W, N, GND, U, V, W, N, GND, mounting type: snap into tall marker groove, for terminal block width: 6.2 mm, lettering field size: 6.15 x 10.5 mm, Number of individual labels: 10 01/16/2021Page18/24 https://www.phoenixcontact.com/us/products/3048836 Four-conductor universal terminal block-UT 4-QUATTRO HV BU-3048836 Accessories Marker for terminal blocks-UC-TM 6 CUS-0824589 Marker for terminal blocks, can be ordered: by sheet, white, labeled according to customer specifications, mounting type: snap into tall marker groove, for terminal block width: 6.2 mm, lettering field size: 5.6 x 10.5 mm, Number of individual labels: 80 Marker for terminal blocks-UCT-TM 6 CUS-0829602 Marker for terminal blocks, can be ordered: by sheet, white, labeled according to customer specifications, mounting type: snap into tall marker groove, for terminal block width: 6.2 mm, lettering field size: 5.6 x 10.5 mm, Number of individual labels: 60 Marker pen Marker pen-X-PEN 0,35-0811228 Marker pen without ink cartridge, for manual labeling of markers, labeling extremely wipe-proof, line thickness 0.35 mm Partition plate Partition plate-ATP-UT-QUATTRO-3047196 Partition plate, length: 69.7 mm, width: 2.2 mm, height: 52.5 mm, color: gray Screwdriver tools 01/16/2021Page19/24 https://www.phoenixcontact.com/us/products/3048836 Four-conductor universal terminal block-UT 4-QUATTRO HV BU-3048836 Accessories Screwdriver-SF-SL 0,6X3,5-100 S-VDE-1212587 Actuation tool, for ST terminal blocks, VDE insulated, with slimmer insulation integrated in the blade, also suitable for use as a bladed screwdriver, size: 0.6 x 3.5 x 100 mm, 2-component grip, with non-slip grip Short-circuit connector Short-circuit connector-FBSRH 2-6-3033812 Short-circuit connector, pitch: 6.2 mm, number of positions: 2, color: red Terminal marking Zack marker strip-ZB 6:UNBEDRUCKT-1051003 Zack marker strip, Strip, white, unlabeled, can be labeled with: PLOTMARK, CMS-P1-PLOTTER, mounting type: snap into tall marker groove, for terminal block width: 6.2 mm, lettering field size: 6.15 x 10.5 mm, Number of individual labels: 10 Marker for terminal blocks-UC-TM 6-0818085 Marker for terminal blocks, Sheet, white, unlabeled, can be labeled with: BLUEMARKIDCOLOR, BLUEMARKID, BLUEMARK CLED, PLOTMARK, CMS-P1-PLOTTER, mounting type: snap into tall marker groove, for terminal block width: 6.2 mm, lettering field size: 5.6 x 10.5 mm, Number of individual labels: 80 01/16/2021Page20/24 https://www.phoenixcontact.com/us/products/3048836 Four-conductor universal terminal block-UT 4-QUATTRO HV BU-3048836 Accessories Marker for terminal blocks-UCT-TM 6-0828736 Marker for terminal blocks, Sheet, white, unlabeled, can be labeled with: TOPMARKNEO, TOPMARK LASER, BLUEMARKIDCOLOR, BLUEMARKID, BLUEMARK CLED, THERMOMARK PRIME, THERMOMARK CARD 2.0, THERMOMARK CARD, mounting type: snap into tall marker groove, for terminal block width: 6.2 mm, lettering field size: 5.6 x 10.5 mm, Number of individual labels: 60 Test plug terminal block Test plugs-PS-6/2,3MM RD-3038736 Test plugs, color: red Test plugs-MPS-MT-0201744 Test plugs, with solder connection up to 1 mm conductor cross section, color: gray Test plugs-PS-6-3030996 Test plugs, Modular test plug, color: red Test plugs-PS-6/2,3MM RD-3038736 Test plugs, color: red 01/16/2021Page21/24 https://www.phoenixcontact.com/us/products/3048836 Four-conductor universal terminal block-UT 4-QUATTRO HV BU-3048836 Accessories Test socket Test adapter-PAI-4-FIX-5/6 BU-3035975 4 mm test adapter, for terminal blocks with 5.2 mm and 6.2 mm pitch Test adapter-PAI-4-FIX-5/6 OG-3035974 4 mm test adapter, for terminal blocks with 5.2 mm and 6.2 mm pitch Test adapter-PAI-4-FIX-5/6 YE-3035977 4 mm test adapter, for terminal blocks with 5.2 mm and 6.2 mm pitch Test adapter-PAI-4-FIX-5/6 RD-3035976 4 mm test adapter, for terminal blocks with 5.2 mm and 6.2 mm pitch 01/16/2021Page22/24 https://www.phoenixcontact.com/us/products/3048836 Four-conductor universal terminal block-UT 4-QUATTRO HV BU-3048836 Accessories Test adapter-PAI-4-FIX-5/6 GN-3035978 4 mm test adapter, for terminal blocks with 5.2 mm and 6.2 mm pitch Test adapter-PAI-4-FIX-5/6 BK-3035980 4 mm test adapter, for terminal blocks with 5.2 mm and 6.2 mm pitch Test adapter-PAI-4-FIX-5/6 GY-3035982 4 mm test adapter, for terminal blocks with 5.2 mm and 6.2 mm pitch Test adapter-PAI-4-FIX-5/6 VT-3035979 4 mm test adapter, for terminal blocks with 5.2 mm and 6.2 mm pitch Test adapter-PAI-4-FIX-5/6 BN-3035981 4 mm test adapter, for terminal blocks with 5.2 mm and 6.2 mm pitch 01/16/2021Page23/24 https://www.phoenixcontact.com/us/products/3048836 Four-conductor universal terminal block-UT 4-QUATTRO HV BU-3048836 Accessories Test adapter-PAI-4-FIX-5/6 WH-3035983 4 mm test adapter, for terminal blocks with 5.2 mm and 6.2 mm pitch Test adapter-PAI-4-N GY-3032871 4 mm test adapter, for terminal blocks with 5.2mm, 6.2mm and 8.2mm pitch Warning label printed Warning label-WS UT 4-3047332 Warning sign for UT terminal blocks Phoenix Contact 2021 (c) - all rights reserved http://www.phoenixcontact.com 01/16/2021Page24/24