Oma ea Holemaking Tools SLUGSBUSTER | 51s buster Punch Units Knockout Punches | : , ~ { Slug-Buster punches are a fast and easy rao ii i way to punch up to 3.0 mm (10 gauge) ar round holes in mild steel. The unique TZN Foe Se et Tae punch profile splits slugs allowing slugs to gr ere fall free. Over 20 Sizes to Choose From Slug-Buster punches are available in 1/2" 2" conduit sizes and in industrial sizes 15.2 through 64.0 mm (.598" ~ 2.520"; Pg sizes Pg-9 through Pg-48; and ISO sizes ISO-16 through ISO-63. Mild Steel capacities 2.0 mm through 3.0 mm _ (14-10 gauge). UC Slug-Buster Punch Units are complete units consisting of punch, die and draw stud. Slug-Buster sets are also available. Hole Sizes Pg Sizes: European standard pipe sizes. iSO Sizes: International Standards Organization pipe sizes. Conduit Sizes: Hole size is outside diameter of US conduit size. Example 1/2" conduit size punch actually makes a 7/8" hole. CAPACITY Mild Steel up to 3.0 mm (10 gauge) APPLICATION Punch mild steel, fiberglass and plastic. OPERATION Operate manually or with ratchet or hydraulic drivers. Manually tum draw stud with wrench. When used with ratchet or hydraulic driver, buy the punch and die only; the draw stud is part of the driver set, For custom size" punches and dies, contact your Greenlee distributor. Patentedan aS fl E Crease Split Release GLUGSBUSTER Punch Units Hole Size Capacity Conia Actual sel Punch Unit Weight Pg Iso Pipe 6 (mm) g (inch) (mm) GA. Cat. No. UPC No. 78-3310- 9 ibs. Pg-9 - 15.2 0.598 2.0 14 7211EBB-15.2 31989 137 03 1S0-16 - 16.2 0.638 2.0 14 35177 35177 137 03 Pg-11 18.6 0.732 2.0 14 7211 EBB-18.6 31990 137 03 Pg-13 i$0-20 20.4 0.803 2.0 14 7211EBB-20.4 31991 137 0.3 Pg-16 1/2" 22.5 718 0.885 3.0 10 7211BB-1/2 31962 137 0.3 IS0-25 25.4 j 1.000 2.0 14 35178 35178 227 05 3/4" 28.3 1.115 3.0 10 7211BB-3/4 31963 363 0.8 Pg-21 - 28.3 4.115 2.0 14 72114EBB-28.3 31993 227 0.5 - - 30.5 1-782 1.210 3.0 10 60246 60246 273 0.6 30.5 4-7/32 1.210 2.0 14 36508 36508 273 0.6 180-32 - 32.5 1.280 3.0 10 35179 35179 363 0.8 v 34.6 1.362 3.0 10 7241 BE-1 31964 454 1 Pg-29 37.0 1.457 3.0 10 7211 EBB-37 31995 545 1.2 1$0-40 40.5 4.595 3.0 10 35180 35180 545 1.2 1-4/4" 43.2 1.701 3.0 10 72116B-1-1/4 31965 590 1.3 Pg-36 47.0 1.850 3.0 10 7211 EBE-47 31996 862 1.9 1-1/2 43.6 1.951 2.0 10 7241 BB- 1-1/2 31966 953 21 ISO-50 50.8 2 2,000 3.0 10 35184 35181 1043 2.3 Pg-42 54.0 2.125 3.0 10 36171 36171 1134 25 Pg-48 60.0 2.362 3.0 10 7211EBB-60 31998 4271 28 2 61.5 2-3/8 2.416 3.0 10 7211BB-2 31967 1452 3.2 1$0-63 64.0 2.520 3.0 10 35182 35182 1452 3.4 For Punch, Die, and Draw Stud Individual Replacement Parts, see page P-5. aT