Data sheet
Creation date March 26, 2019 9:46:03 AM CET
Catalogue status 15.03.2019 / We reserve the right to make technical changes. 1
MCZ SERIES
MCZ R 24VDC
Weidmüller Interface GmbH & Co. KG
Klingenbergstraße 16
D-32758 Detmold
Germany
Fon: +49 5231 14-0
Fax: +49 5231 14-292083
www.weidmueller.com
Product image
Similar to illustration
General ordering data
Type MCZ R 24VDC
Order No. 8365980000
Version MCZ SERIES, Relays, No. of contacts: 1 CO
contact AgSnO, Rated control voltage: 24 V DC
±20 %, Continuous current: 6 A, Tension-clamp
connection
GTIN (EAN) 4008190387839
Qty. 10 pc(s).
The MCZ R relay couplers, with a width of only 6 mm, are
the thinnest in their class.
They are distinguished by the following features:
• Tension clamp connection
• Integrated cross-connection in input/output.
Clampable conductor cross-section is 0.5 to 1.5 mm²
Data sheet
MCZ SERIES
MCZ R 24VDC
Weidmüller Interface GmbH & Co. KG
Klingenbergstraße 16
D-32758 Detmold
Germany
Fon: +49 5231 14-0
Fax: +49 5231 14-292083
www.weidmueller.com
Technical data
Creation date March 26, 2019 9:46:03 AM CET
Catalogue status 15.03.2019 / We reserve the right to make technical changes. 2
Dimensions and weights
Width 6.1 mm Width (inches) 0.24 inch
Height 91 mm Height (inches) 3.583 inch
Depth 63.2 mm Depth (inches) 2.488 inch
Net weight 23.4 g
Temperatures
Humidity 5 - 93% rel. humidity, Tu =
40°C, no condensation
Operating temperature, max.
50 °C
Operating temperature, min. -25 °C Storage temperature, max. 60 °C
Storage temperature, min. -40 °C Operating temperature -25 °C...50 °C
Storage temperature -40 °C...60 °C
Environmental Product Compliance
REACH SVHC Lead 7439-92-1
Input
Rated control voltage 24 V DC ± 20 % Rated current DC 6.3 mA
Power rating 156 mW Pull-in/drop-out voltage, typ. 19 V / 4 V DC
Status indicator
Green LED
Protective circuit Free-wheeling diode,
Reverse polarity protection
Output
Rated switching voltage 250 V AC Max. switching voltage, AC 250 V
Max. switching voltage, DC 250 V Continuous current 6 A
Inrush current 6 A AC switching capacity (resistive), max. 1500 VA
DC switching capacity (resistive), max. 144 W @ 24 V Switch-on delay < 5 ms
Switch-off delay
< 15 ms
Min. switching power 1 mA @ 24 V, 10 mA @ 10
V, 100 mA @ 5 V
Max. switching frequency at rated load 0.1 Hz
Contact data
Contact type 1 CO contact (AgSnO) Mechanical service life 10 x 106 switching cycles
General data
Version One end without
connector
Rail
TS 35
Test button No Mechanical switch position indicator No
Open sides right Colour code beige
UL 94 flammability rating V-0
Insulation coordination
Rated voltage 300 V Surge voltage category III
Pollution severity 2 Protection degree IP20
Dielectric strength, Input/Output
4 kVeff / 1 s
Creepage and clearance distance input –
output ≥ 5.5 mm
Creepage and clearance distances
between contacts 5.5 mm
Dielectric strength to mounting rail
4 kVeff / 1 min.
Impulse withstand voltage 4 kV (1.2/50 µs)
Data sheet
MCZ SERIES
MCZ R 24VDC
Weidmüller Interface GmbH & Co. KG
Klingenbergstraße 16
D-32758 Detmold
Germany
Fon: +49 5231 14-0
Fax: +49 5231 14-292083
www.weidmueller.com
Technical data
Creation date March 26, 2019 9:46:03 AM CET
Catalogue status 15.03.2019 / We reserve the right to make technical changes. 3
Further details of approvals / standards
Standards DIN EN 50178, UL508 Certificate No. (CSA) 154685-1198742
Certificate No. (GERMLLOYD) TAE00003BK Certificate No. (cURus) E141197
Connection data
Wire connection method Tension-clamp connection Stripping length, rated connection 8 mm
Clamping range, rated connection 1.5 mm² Clamping range, min. 0.5 mm²
Clamping range, max.
1.5 mm²
Wire connection cross section AWG,
min. AWG 26
Wire connection cross section AWG,
max. AWG 16
Wire cross-section, solid, min.
0.5 mm²
Wire cross-section, solid, max.
1.5 mm²
Wire connection cross-section, finely
stranded, min. 0.5 mm²
Wire connection cross section, finely
stranded, max. 1.5 mm²
Wire cross-section, finely stranded, min.
(AWG) AWG 26
Wire cross-section, finely stranded, max.
(AWG)
AWG 16
Wire connection cross-section, finely
stranded with wire-end ferrules DIN
46228/4, min. 0.5 mm²
Wire connection cross-section, finely
stranded with wire-end ferrules DIN
46228/4, max. 1.5 mm²
Conductor cross-section, flexible, AEH
(DIN 46228-1), min.
0.5 mm²
Conductor cross-section, flexible, AEH
(DIN 46228-1), max. 1.5 mm²
Blade size
0.6 x 3.5 mm
Classifications
ETIM 3.0 EC001437 ETIM 4.0 EC001437
ETIM 5.0 EC001437 ETIM 6.0 EC001437
UNSPSC 30-21-19-17 eClass 5.1 27-37-16-01
eClass 6.2 27-37-16-01 eClass 7.1 27-37-16-01
eClass 8.1 27-37-16-01 eClass 9.0 27-37-16-01
eClass 9.1 27-37-16-01
Product information
Product information The cable lengths must not exceed 30 m.
Descriptive text technical data End plate AP MCZ 1.5: 8389030000
Accessories and dimensional drawings: refer to the MCZ Accessories page.
Approvals
Approvals
ROHS Conform
Downloads
Approval/Certificate/Document of
Conformity DE_PA_5600_160311_004.pdf
Brochure/Catalogue CAT 4.2 ELECTR 18/19 EN
Engineering Data EPLAN, WSCAD, Zuken E3.S
Engineering Data STEP
User Documentation Operating Instructions
Data sheet
MCZ SERIES
MCZ R 24VDC
Weidmüller Interface GmbH & Co. KG
Klingenbergstraße 16
D-32758 Detmold
Germany
Fon: +49 5231 14-0
Fax: +49 5231 14-292083
www.weidmueller.com
Drawings
Creation date March 26, 2019 9:46:03 AM CET
Catalogue status 15.03.2019 / We reserve the right to make technical changes. 4
Product image
Similar to illustration
Wiring diagram
Graph
DC load limit curve
Graph
Derating curve
Dimensional drawing
