86A 316L SS Pressure Sensor Small Profile 0.5 - 4.5V High Level Output Gage, Absolute ASIC Calibrated (Image displays Absolute type) DESCRIPTION The 86A is a small profile, media compatible, piezoresistive silicon pressure sensor packaged in a 316L stainless steel housing. The 86A is designed for o-ring mounting. The sensing package utilizes silicone oil to transfer pressure from the 316L stainless steel diaphragm to the sensing element. The 86A is designed for high performance, low pressure applications. A custom ASIC is used for temperature compensation, offset correction, and provides an amplified output of 0.5 to 4.5V. For a similar sensor with a plastic threaded fitting, refer to the LM pressure transducer. FEATURES APPLICATIONS O-Ring Mount -20C to +85C Operating Temperature Range 1.0% Pressure Non Linearity Down to 3.0% Total Error Band Solid State Reliability Level Controls Tank Level Measurement OEM Equipment Corrosive Fluids and Gas Measurement Systems Sealed Systems Manifold Pressure Measurement Barometric Pressure Measurement Submersible Depth Monitoring STANDARD RANGES Range psig Range Barg 0 to 1 psia 0 to .07 Bara 0 to 2 0 to .14 0 to 5 0 to .35 0 to 15 0 to 1 0 to 30 0 to 2 0 to 50 0 to 5 0 to 100 0 to 7 0 to 150 0 to 10 Intermediate ranges available, contact factory. 86A www.meas-spec.com 1/4 March 2015 86A PERFORMANCE SPECIFICATIONS Supply Voltage: 5.0Vdc Ambient Temperature: 25C (unless otherwise specified) PARAMETERS MIN Full Scale Output Span Pressure Hysteresis MAX 4.5 Zero Pressure Output (Offset) Pressure Non Linearity TYP 0.3 -0.1 Repeatability NOTES V 0.5 -1 UNITS V 1 %Span 0.1 %Span 1 0.02 %Span Temperature Error - Span (0C to 40C) 1, 2psi and .07bar: 2.0 5psi or .35bar: 1.5 %Span 2 Temperature Error - Zero (0C to 40C) 1, 2psi and .07bar: 2.0 5psi or .35bar: 1.5 %Span 2 0.25 %Span 1 1, 2psi and .07bar: 7 5psi and .35bar: 5 >5psi or .35bar: 3 %Span Accuracy (combined linearity, hysteresis, & repeatability) Total Error Band (includes calibration errors above & temperature effects over the compensated range) Supply Voltage Insulation Resistance (50Vdc) 4.75 5.00 Pressure Overload Compensated Temperature Operating Temperature Media - Pressure Port 5.25 50 V 3 M 4 3X Rated 0 +40 C -20 +85 C Liquids and Gases compatible with 316L Stainless Steel Notes 1. Best fit straight line. 2. Over the compensated temperature range with respect to 25C. 3. Guarantees output/input ratiometricity. 4. Between case and sensing element. 5. The maximum pressure that can be applied to a transducer without rupture of either the sensing element or transducer. 86A www.meas-spec.com 2/4 March 2015 86A DIMENSIONS 86A www.meas-spec.com 3/4 March 2015 86A ORDERING INFORMATION 86A 3 R - 00000 0 - 150P G Pressure Unit (G = Gage, A = Absolute) Units (P = psi, B = Bar) Pressure Range Port Type (0 = Standard, X = Special) Custom P/N (00000 = Standard Product) Connection (R = 6" Ribbon Cable, C = 6" Ribbon Cable with Connector, X = Special Connection) Output (3 = 0.5 to 4.5V, X = Special Output) Model NORTH AMERICA EUROPE Measurement Specialties 45738 Northport Loop West Fremont, CA 94538 Tel: 1-800-767-1888 Fax: 1-510-498-1578 Sales: pfg.cs.amer@meas-spec.com Measurement Specialties (Europe), Ltd. 26 Rue des Dames 78340 Les Clayes-sous-Bois, France Tel: +33 (0) 130 79 33 00 Fax: +33 (0) 134 81 03 59 Sales: pfg.cs.emea@meas-spec.com ASIA Measurement Specialties (China), Ltd. No. 26 Langshan Road Shenzhen High-Tech Park (North) Nanshan District, Shenzhen 518057 China Tel: +86 755 3330 5088 Fax: +86 755 3330 5099 Sales: pfg.cs.asia@meas-spec.com The information in this sheet has been carefully reviewed and is believed to be accurate; however, no responsibility is assum ed for inaccuracies. Furthermore, this information does not convey to the purchaser of such devices any license under the patent rights to the manufacturer. Measurement Specialties, Inc. reserves the right to make changes without further notice to any product herein. Measurement Specialties, Inc. makes no warranty, representation or guarantee regarding the suitability of its product for any particular purpose, nor does Measurement Specialties, Inc. assume any liability arising out of the application or use of any product or circuit and specif ically disclaims any and all liability, including without limitation consequential or incidental damages. Typical parameters can and do vary in different applications. All operating parameters must be validated for each customer application by customer's technical experts. Measurement Specialties, Inc. does not convey any license under its patent rights nor the rights of others. 86A www.meas-spec.com 4/4 March 2015 Mouser Electronics Authorized Distributor Click to View Pricing, Inventory, Delivery & Lifecycle Information: TE Connectivity: 86A3R-000000-005PG 86A3R-000000-100PG 86A3R-000000-150PG